Credential Privilege - Admin
Device Template - Hitachi Storage
Pre-requisites
- Ensure storage device is pingable from OpManager.
- If the device doesn't have SMI server then compatible 3rd party SMI server should have been installed.
HPE Nimble
General Information
Credential Privilege - Admin
Device Template - HPE Nimble
Pre-requisites
- Ensure storage device is pingable from OpManager.
- The API port should be allowed through firewall.
HP EVA (SSSU)
General Information
Credential Privilege - Admin
Device Template - HP EVA (SSSU)
Pre-requisites
OpManager monitors HP EVA based on the command View EVA (CV EVA) version installed in your network environment.
A) SSSU Installation Instructions
- OpManager uses SSSU (Storage System Scriptin Utility) available as part of HP StorageWorks Windows Kit for Enterprise Virtual Array installation.
- This needs to be installed in the server where OpManager is installed and running.
- Ensure that "SSSU.exe" is included in the PATH environment variable in the server in which OpManager is installed. (You can check this by executing SSSU.exe in a command prompt which will print the version)
Note: In case your current SSSU version is higher (say 5.0), you need to download SSSU.exe (Version 4.0) and include it in the %PATH%. For this you may follow the steps below.
- Open the HP software download URL, HP Software Download Page.
- Click on "HP StorageWorks Command View EVA V4.0 Media Kit". This will open a page which lists the supported Operating Systems.
- Click on the operation system corresponding to the server running OpManager (Example: Windows 2003)
- Click on the "Download" button corresponding to the HP StorageWorks Storage System Scripting Utility (SSSU) v4.0". This will donwload SSSU.exe.
- After including SSSU utility in the %PATH% environment variable, restart OpManager (shutdown & start). This is required for the Environment PATH settings to take effect.
evaperf Installation Instructions
For Performance monitoring, evaperfutility needs to be installed in the server running OpManager.
Ensure that, the evaperf utility installed host and the CommandView EVA running host are connected via Fibre Channel.
- Include evaperf in the PATH environment variable
- Ensure that the installed EvaPerf utility is compatible with EVA firmware version.
- Ensure that evapdcs (EVA Performance Data Collection Service) is installed along with evaperf by executing the command "evapdcs -v"
- If it prints "evapdcs is currently installed" , you may check its startup status in the Windows "Services" menu . This service is registered with the name "HP EVA Performance Data Collector". (If the status is "disabled", it indicates that it is in an improper state and you will need to restart the host server once and then check the above again)
- In case the above command prints "evapdcs not installed" , install evapdcs via the following command evapdcs -i -m
-
The server running OpManager needs to be registered to the Command View EVA server via , "evaperf fnh [hostname] [username] [password]"
hostname - CVE host name , username - CVE username , password - CVE password
- OpManager uses EVA name (known as friendly name in EVA terminology ) to issue evaperf commands. For this the EVA name - WWN mapping needs to be registered via "evaperf fn" command
- If the EVA is password protected, the EVA password needs to be registered for the respective EVA WWN via "evaperf spw array_WWN array_Password" command
- You can check if evaperf is able to fetch valid data by entering the following command in the OpManager/ directory ,
- evaperf all -sz <EVA Name> -csv -nots (This will automatically start evapdcs service, if it is not started already) . This should print all the EVA performance statistics (for Array, VDisk , Disk etc).
-
The sample output should look similar to the one given below : CPU %,Data %,Ctlr,Serial,Node
82,81,A,V8398ADVBP2003,5065-1FD1-5021-8781
94,99,B,V8398ADVHV200D,5060-1FF1-5031-8582
Note:Installation details for evaperf are available in the HP StorageWorks Command View EVA installation guide.
HP EVA(SMI-S)
General Information
Credential Privilege - Admin
Device Template - HP EVA(SMI-S)
Pre-requisites
HP MSA 2312
General Information
Credential Privilege - Admin
Device Template - HP MSA 2312
Pre-requisites
- OpManager uses the HP SMI-S MSA Provider based on SNIA standard to monitor the HP MSA
- The MSA provider can be installed on any server running Microsoft Windows.
- This server must have a path through the SAN to the MSA devices that will be managed.
- Also the server must be reachable from the server where OpManager is installed.
- Install the necessary software from the OEM website.
- Ensure that MSA firmware version is compatible with the installed SMI-S provider.
- Start the MSA Provider service hp StorageWorks SMI-S CIMOM from the Windows services menu.
HP MSA Storage
General Information
Credential Privilege - Admin
Device Template - HP MSA Storage
Pre-requisites
- The Storage device should be pingable from OpManager installed server.
- OpManager uses the HP SMI-S MSA Provider based on SNIA standard to monitor the HP MSA
- The MSA provider can be installed on any server running Microsoft Windows 2000 or Windows 2003 Server.
- This server must have a path through the SAN to the MSA devices that will be managed.
- Also the server must be reachable from the server where OpManager is installed.
- Install the necessary software from the OEM website.
- Ensure that MSA firmware version is compatible with the installed SMI-S provider.
- Start the MSA Provider service hp StorageWorks SMI-S CIMOM from the Windows services menu.
HPE StoreOnce
General Information
Credential Privilege - Admin
Device Template - HPE StoreOnce
Pre-requisites
- The Storage device should be pingable from OpManager.
- The model that supports StoreOnce appliance must have the software version 4.1.x and newer. It is not compatible with models having software versions 3.x or older.
HPE Storage Device (WSAPI)
General Information
Credential Privilege - Admin
Device Template - HPE Storage Device (WSAPI)
Pre-requisites
- Ensure the storage device is pingable from OpManager.
- Ensure that the device to be added supports API.
- The WSAPI server does not start automatically. Log in to the CLI as Super, Service, or any role granted the wsapi_set right. Start the WSAPI server using the following command, cli% startwsapi.
- WSAPI version 1.6.4 or higher is required.
- To access WSAPI version, log in to CLI as Super, Service or any other role granted to wsapi_set right and use the command: cli% showwsapi
HPE XP
General Information
Credential Privilege - Admin
Device Template - HPE XP
Pre-requisites
- HPE XP7/XP8 Remote Web Console should be installed.
- HPE XP Performance Advisor 8.0 and above should be installed and configured with the device to be added.
HPE MSA(API)
General Information
Credential Privilege - Admin
Device Template - HPE MSA(API)
Pre-requisites
- Ensure that the device running the product can ping the storage device.
- Ensure that the storage device supports API.
Huawei 18800 Series
General Information
Credential Privilege - Admin
Device Template - Huawei 18800 Series
Pre-requisites
- The Storage device should be pingable from OpManager installed server.
- If the device doesn't have SMI server then compatible 3rd party SMI Server should have been installed
Huawei 9000 Cluster
General Information
Credential Privilege - Admin
Device Template - Huawei 9000 Cluster
Pre-requisites
- Ensure storage device is pingable from OpManager.
- The API port should be allowed through firewall.
Huawei Fusion Storage
General Information
Credential Privilege - Admin
Device Template - Huawei Fusion Storage 8.x
Pre-requisites
- Ensure storage device is pingable from OpManager.
- The API port should be allowed through firewall.
Huawei Storage
General Information
Credential Privilege - Admin
Device Template - Huawei Storage
Pre-requisites
- Ensure storage device is pingable from OpManager.
- The API port should be allowed through firewall.
IBM DS Series
General Information
Credential Privilege - Admin
Device Template - IBM DS Series
Pre-requisites
- The Storage device should be pingable from OpManager installed server.
IBM ESS
General Information
Credential Privilege - Admin
Device Template - IBM ESS
Pre-requisites
IBM Spectrum Virtualize
General Information
Credential Privilege - Admin
Device Template - IBM Spectrum Virtualize
Pre-requisites
- Ensure storage device is pingable from OpManager.
- The API port should be allowed through firewall.
- The installed version of IBM Spectrum Virtualize should be higher than 8.1.3.
IBM FS 840/900 Storage
General Information
Credential Privilege - Admin
Device Template - IBM FS 840/900 Storage
Pre-requisites
- Ensure storage device is pingable from OpManager.
- Port 9443 should be allowed through the firewall.
INFINIBOX Storage
General Information
Credential Privilege - Admin
Device Template - INFINIBOX Storage
Pre-requisites
- Ensure storage device is pingable from OpManager.
- The API port should be allowed through firewall.
Infortrend
General Information
Credential Privilege - Read Community
Device Template - Infortrend
Pre-requisites
- Make sure storage device is pingable from OpManager.
- The SNMP port should be allowed through firewall.
KAMINARIO Storage
General Information
Credential Privilege - Admin
Device Template - KAMINARIO Storage
Pre-requisites
- Ensure storage device is pingable from OpManager.
- The API port should be allowed through firewall.
NetApp ONTAP(Cluster)
General Information
Credential Privilege - Admin
Device Template - NetApp ONTAP (Cluster)
Pre-requisites
- Ensure storage device is pingable from OpManager.
- The API port should be allowed through firewall.
NetApp E2X00/E5X00/EF5X0
General Information
Credential Privilege - Admin
Device Template - NetApp E2X00/E5X00/EF5X0
Pre-requisites
- The Storage device should be pingable from OpManager installed server.
- If the device doesn't have SMI server then compatible 3rd party SMI Server should have been installed.
Promise VTrak
General Information
Credential Privilege - Read Community
Device Template - Promise VTrak
Pre-requisites
- Ensure SNMP agent is running.
- Ensure storage device is pingable from OpManager.
- The SNMP port should be allowed through firewall.
Pure Storage(API)
General Information
Credential Privilege - Admin
Device Template - Pure Storage(API)
Pre-requisites
- Ensure storage device is pingable from OpManager.
- The API port should be allowed through firewall.
PureStorage
General Information
Credential Privilege - Admin
Device Template - PureStorage
Pre-requisites
- Ensure storage device is pingable from OpManager.
StorageTek LSI (SSCS)
General Information
Credential Privilege - Admin
Device Template - LSI(SSCS)
Pre-requisites
- Make sure storage device is pingable from OpManager.
SUN StorEdge6920
General Information
Credential Privilege - Admin
Device Template - SUN StorEdge 6920
Pre-requisites
- OpManager uses command line utility (SMcli.exe) available as part of SANtricity Storage Manager Client installation
- Ensure that SMcli is installed in the server in which OpManager is installed.
- Include the directory containing SMcli.exe in the PATH environment variable.
- By default for Windows Servers this is C:\Program Files\SM8\client\
- By default for UNIX Servers this is /opt/SM8/client/
- Ensure that OpManager is restarted (shutdown & started) after including SMcli in the path
Synology DSM
General Information
Credential Privilege - Read Community
Device Template - Synology DSM
Pre-requisites
- Ensure storage device is pingable from OpManager.
- The SNMP port should be allowed through firewall.
FCSwitch
Cisco MDS
General Information
Credential Privilege - Read Community
Device Template - Cisco MDS
Pre-requisites
- The Read community should have read access right. Please provide the Community in the OpManager web-client while adding Switch. You can check the community names (and their access rights) configured in your MDS switch by issuing the command "show snmp community" via telnet to switch
- To set the access rights for a community in your cisco switch , you need to do the following ,
- Go to config mode , by typing the command ,config t
- Set the snmp community by typing the command,snmp-server community <community> <rw | ro
- For example, to set read-only access right to "public" community you can type ,snmp-server community public ro
SNIA FCMGMT
General Information
Credential Privilege - Read Only
Device Template - SNIA FCMGMT
Pre-requisites
QNAP
General Information
Credential Privilege - Admin
Device Template - QNAP QTS Storage
Pre-requisites
- Ensure storage device supports API.
Tape Library
ADIC 100
General Information
Credential Privilege - Read Community
Device Template - ADIC 100
Pre-requisites
ADIC i2000
General Information
Credential Privilege - Read Community
Device Template - ADIC i2000
Pre-requisites
- Ensure that the SNMP agent is running.
- Register OpManager server IP address as trap destination.
- Details are available in ADIC Scalar i2000 User's Guide.
ATL Quantum
General Information
Credential Privilege - Read Community
Device Template - ATL Quantum
Pre-requisites
- Ensure that the SNMP agent is running
- Register OpManager server IP address as trap destination
- Has the SNMP community name configured as "public" ? (If a different community is used , it needs to be specified when you add the device via OpManager.)
HP EML/ESL
General Information
Credential Privilege - Admin
Device Template - HP EML/ESL
Pre-requisites
- OpManager uses the HP SMI-S TL Provider to monitor the HP Tape Libraries
- The TL provider can be installed on any server running Microsoft Windows 2000 / Windows 2003 / Windows XP / Windows Professional.
- This server must have a path through the SAN to the TL devices that will be managed.
- Also the TL Provider installed server must be pingable from the server where OpManager is installed.
- Install the necessary software from the OEM website.
- Start the TL Provider service hp StorageWorks SMI-S CIMServer from the Windows services menu.
IBM 3584
General Information
Credential Privilege - Read Community
Device Template - IBM 3584
Pre-requisites
- Ensure that the SNMP agent is enabled in the tape library before adding the device via OpManager web-client.
- The details are available in the "IBM 3584 Planning & Operator Guide" in "Chapter 4 Advanced Operating Proceedures --> Selecting the Network Settings".
- Ensure storage device is pingable from OpManager.
- The SNMP port should be allowed through firewall.
IBM TS3100
General Information
Credential Privilege - Read Community
Device Template - IBM TS3100
Pre-requisites
- Ensure SNMP agent is running.
- Ensure storage device is pingable from OpManager.
- The SNMP port should be allowed through firewall.
IBM TS3200
General Information
Credential Privilege - Read Community
Device Template - IBM TS3200
Pre-requisites
- Ensure SNMP agent is running.
- Ensure storage device is pingable from OpManager.
- The SNMP port should be allowed through firewall.
TapeLibrary
Overland TapeLibrary
General Information
Credential Privilege - Read Community
Device Template - Overland TapeLibrary
Pre-requisites
- Ensure SNMP agent is running.
- Ensure storage device is pingable from OpManager.
- The SNMP port should be allowed through firewall.
Qualstar TapeLibrary
General Information
Credential Privilege - Read Community
Device Template - Qualstar TapeLibrary
Pre-requisites
- Ensure SNMP agent is running.
- Ensure storage device is pingable from OpManager.
- The SNMP port should be allowed through firewall.
- Refer the Q-Link (Qualstar's Remote Library Management software) user manual section "SNMP" under the chapter "Q-Link Remote Library Manager" for details.
SpectraLogic T120
General Information
Credential Privilege - Read Community
Device Template - SpectraLogic T120
Pre-requisites
- Ensure SNMP agent is running.
- Ensure storage device is pingable from OpManager.
- The SNMP port should be allowed through firewall.
SpectraLogic T950
General Information
Credential Privilege - Read Community
Device Template - SpectraLogic T950
Pre-requisites
- Ensure SNMP agent is running.
- Ensure storage device is pingable from OpManager.
- The SNMP port should be allowed through firewall.
StorageTek TapeLibrary
General Information
Credential Privilege - Read Community
Device Template - StorageTek TapeLibrary
Pre-requisites
- Ensure SNMP agent is running.
- Ensure storage device is pingable from OpManager.
- The SNMP port should be allowed through firewall.
SUN SL8500
General Information
Credential Privilege - Read Community
Device Template - SUN SL8500
Pre-requisites
- Ensure SNMP agent is running.
- Ensure storage device is pingable from OpManager.
- The SNMP port should be allowed through firewall.