Scan IP addresses for availability
OpUtils add-on provides a fast, flexible, and centralized management of IP addresses such as IPv4 and IPv6. It helps you detect the availability of IP addresses pertaining to a particular subnet and also lets you to enter multiple subnet inputs, allowing you to scan your entire network in seconds.
Instantly trace devices connected to switch ports
OpUtils add-on eliminates manual tracing of the network cables by instantly identifying the switch ports to which devices are connected, with a switch port mapper. It also helps you gain visibility into the IP, MAC, VLAN, status and availability of ports.
Detect and prevent rogue device intrusion
OpUtils add-on helps you control which devices can connect to your network by detecting rogue devices and by blocking them from accessing your network. It also notifies you every time an unknown device is detected in your network.
Boot machines remotely with Wake-On-LAN *
OpUtils add-on's Wake-On-LAN feature allows you to boot up powered off machines remotely. It also provides you an option to send the WoL packets to a specific system, or broadcast the WoL packets to whole subnets and automatically updates the status and the last wake-up time.
Troubleshoot faster with 20+ tools
OpUtils add-on helps you troubleshoot, debug connectivity issues, packet loss and latency in a LAN environment. It provides over 20+ tools such as ping, SNMP tools, MAC address and DNS resolver, Cisco tools, DHCP scope monitor etc., to aid in faster diagnosis and troubleshooting.
Monitor bandwidth and traffic efficiently *
OpUtils add-on provides real-time bandwidth monitoring for identifying bottlenecks related to bandwidth within the network. You can monitor the network traffic utilization/ bandwidth usage both at the interface level and at the device level
