Cisco 6800 IOS Switch Configuration

You can perform Cisco 6800 IOS Switch configuration using the following steps:

config t
flow record NFArecord
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
match interface input
collect interface output
collect ipv4 source mask
collect ipv4 source prefix
collect ipv4 destination prefix
collect ipv4 destination mask
collect counter bytes long
collect counter packets long
collect timestamp sys-uptime first
collect timestamp sys-uptime last

flow exporter NFAexporter
destination {NETFLOW_SERVER_IP}
source {LOOPBACK_INTERFACE_NAME}
transport udp {NETFLOW_SERVER_LISTENER_PORT}
template data timeout 60

flow monitor NFAmonitor
exporter NFAexporter
record NFArecord
cache timeout active 60

Enter global configuration mode on the router or MSFC, and issue the following commands for each interface on which you want to enable flow:
interface {INTERFACE_NAME}
ip flow monitor NFAmonitor input