Cisco Meraki

     

    Please refer the below to configure Meraki device to export NetFlow Packets. NetFlow can be configured in Dashboard on the Network-wide > Configure > General page. NetFlow configuration settings are found under the Reporting header, with the following options:

    1. NetFlow traffic reporting
      • A drop-down menu to enable or disable NetFlow functionality
    2. NetFlow collector IP
      • This configuration option only appears if NetFlow traffic reporting is set to "Enabled: send netflow traffic statistics"
      • Used to configure the IPv4 address of the NetFlow collector
    3. NetFlow collector port
      • This configuration option only appears if NetFlow traffic reporting is set to "Enabled: send netflow traffic statistics"
      • Used to configured the UDP port that the NetFlow collector will be listening on

    NetFlow data can be exported to a collector on the LAN of an MX, across a site-to-site VPN connection, or over the public Internet.