ManageEngine OpUtils | Read me

Build No: 12.8.401 - October 25, 2024

  • Users can now utilize the new DHCP MAC Filtering feature on Microsoft DHCP Servers to allow or deny network access to a list of devices.
  • Previously, there was an issue discovering subnets from routers using SNMP v3 via the Router page, under Settings. This has been fixed now.
  • Previously, there was a sudden memory spike while scanning the switches. It has been fixed now.
  • Previously, OpManager's UI would go blank for users with custom roles, limited to IPAM and SPM modules. This issue has now been fixed.

Build No: 12.8.344 - September 10, 2024

  • In the IP Address Manager module under DHCP server, search capabilities have been added for easier DHCP server identification
  • Previously, users faced search and sort issues in the DHCP Summary, Scope Details, and IP details tabs. This issue has now been resolved.
  • Clicking on a scope address under the DHCP Scope Details tab now navigates to the IP Details page and applies the DHCP address filter.
  • There was a page refresh issue in the IP Address Management page while scanning subnets. It has now been fixed.
  • The scheduler configuration page under IP Address Management(IPAM), and Switch Port Mapper(SPM) has been improved to simplify the task addition process.
  • The default scheduler name in Switch Port Mapper has been renamed from "Default Group" to "Default Task" to prevent inventory confusion.
  • Previously, a scoped user had issues adding schedulers in Switch Port Mapper. It has been fixed now.
  • Previously, in Rogue Detection, the severity filters for rogue, trusted, and guest worked only for a single click. This has now been fixed.
  • Previously, in the IP Address Manager Donut view, the filters for NIC Type were not working correctly. This issue has been fixed.
  • Previously, an issue occurred when many filters were selected in the IP Address Manager's Donut view for NIC Type. This issue has been fixed.
  • Previously, in the IP Address Manager's Donut view, an issue occurred in the AD tab when both AD and NOT IN AD options were selected. This issue has been fixed now.
  • Previously, there was an issue in the Horizontal Bar Chart in the Alerts tab, under Network Monitor. These issues have been fixed.
  • Previously, there was an issue while sorting on the 'Added time' column in Rogue Detection for severity levels of rogue and trusted devices. This issue has been fixed.
  • Previously, there were issues with sorting and searching the Status column, and the Monitoring status column in the Network Monitor's Device tab. This has now been fixed.
  • Previously, sorting and searching in the severity column in Network Monitor's Alerts tab resulted in undefined values. This issue has been fixed.
  • Search option has been added to the 'Status' column in Bandwidth Monitor.
  • Previously, the Rogue Detection page became unresponsive when selecting sub filters and changing severity. This issue has been fixed.
  • A new option has been added under Settings->General Settings called Server Settings. This tab allows you to change the port of a running service in OpUtils.
  • Previously, there was a filter issue in the Donut view widget in the SPM tab, under Alarms. This has now been fixed.
  • Previously, there was an issue with updating the DHCP Scope name for an existing scope while scanning the DHCP server. This has been fixed now.
  • Previously, in IP Address Manager, the Custom Column values were lost when a new MAC address was mapped to an existing IP address. This issue has been fixed now.
  • The colour for the availability status in the IP Address Manager's heat map widget has been changed to green.
  • The row color for DHCP Reserved Status of IP addresses in the IP Address Manager has been changed.
  • Previously, admin privilege restrictions affected users with write role permissions. Users can now perform write operations if it is configured in their role.
  • Previously, in the Ports tab under Switch Port Mapper, there was an issue in the ifAlias column. This has been fixed now.
  • Previously, there was an issue where the bandwidth monitor status was marked "down" for all devices. This has been fixed now.
  • Previously, there was an error in trace route responses for low latency devices. This has been fixed now.
  • Previously, in the IP details snapshot page, there was an issue with sorting and searching in the AD Domain column. This has been fixed now.
  • Previously, free users could add more than one switch for Switch Port Monitoring in the OpManager Probe, causing users to encounter a license violation page when logging in. This has been fixed now.

Build No: 12.8.317 - July 17, 2024

  • General: Previously, versions 12.7 and above faced an issue with launching the standalone Mib Browser tool (MIB Browser.bat). It has been fixed now.
  • The IP Address Management (IPAM) feature now includes the ability to discover subnets from the ipAddrtable.
  • A new mail alert has been introduced for IP Address Management(IPAM), to notify customers about newly discovered subnets for quick review and approval.
  • The DHCP reserved IP addresses will be color coded in IP Address Management.
  • The "NIC type" table has been updated to match the IEEE OUI list.
  • The DHCP reservation count has been removed from the DHCP scope usage alert mail for improved user clarity.

Build No: 12.8.271 - December 16, 2024

  • General: Previously, there was an issue while deleting bulk subnets from the OpManager Probe's license page. This has been fixed now.
  • General: Previously, the MIB Browser was not responding to low-latency devices when custom SNMP credentials were used. This issue has now been fixed.
  • OpManager: Previously, the OS and NIC type widget summary data sync from the probe to the central was initiated after every subnet scan, which blocked other sync processes in the central. This has now been fixed.
  • OpManager: Previously, in the Trap Viewer, the trap receiver stopped after it was started, if the user switched to another browser tab or navigated away from the page. This issue has now been fixed.
  • Previously, there was an issue retrieving configuration files in the Config File Manager tool from version 12.8.269. This has now been fixed.
  • Previously, on the switch snapshot page under the Switch Port Mapper tab, the scan functionality did not work when users clicked the Scan Switch icon. This issue has now been fixed.

Build No: 12.8.270 - October 24, 2024

  • OpManager: Previously, there were issues in fetching the 'Availability Statistics' graph for Windows Service monitor. This issue has now been fixed now.
  • OpManager: Users were unable to import devices to Google/Zoho map if the same devices exist in the Business View. This issue has been fixed now.
  • OpManager: Previously, the global search page displayed a blank page when searching for an existing device, due to a mismatch in custom fields association. This has been fixed now.
  • OpManager: OpManager now includes the downtime duration in the interface up alarm.
  • OpManager: Previously, users were unable to update the Business view when any of its member is in use by the internal scheduler. This has been fixed now.
  • OpManager MSP: The device summary page accessed from Central, will now fetch the data from Probe to avoid discrepancy.
  • Enterprise Edition: Previously, the Discovery Rule Engine page in Central doesn't list the devices based on the probe filter. This issue has been fixed now.
  • OpUtils: Previously, users faced an issue on the IP Management license page. This issue has now been fixed.

Build No: 12.8.265 - July 03, 2024

  • General: Previously, the Linux users faced an issue where Trace Route was not functional. This has now been fixed.
  • General: Previously, the Generic type for v2 and v3 was displayed incorrectly in the trap viewer. This has now been fixed.
  • OpManager: Previously in OpManager, there was an issue with hiding the OpUtils and Firewall dashboards in the edit tab action. This has now been fixed.
  • OpManager: In OpManager, the Port View tab has been added to the Cisco ACI device snapshot.
  • OpManager: Users now have access to the Connected IP Details report available on the OpManager Switch snapshot page.
  • OpManager: In OpManager, when the switch name is added with different DNS, the OpManager snapshot port view will display sample data.
  • Previously, users faced an issue on the IP Management license page. This issue has now been fixed.
  • Previously, there was an issue with updating the Fortinet and Huawei routers using CLI device types. This issue has now been fixed.
  • Previously, users faced an issue when searching ports by MAC and DNS. This issue has now been fixed.
  • Previously, users faced an issue with exporting the DHCP server's Scope and IP details. This issue has now been fixed.
  • Previously, there was an issue with the OpUtils Audit custom time-based search. This issue has now been fixed.
  • Previously, under Reports, in the IP Request tool, users faced an issue with selecting Available IPs from the Preferred Subnet, when using the console in non-english languages. This has now been fixed.
  • The OpUtils Audit report API has now been updated as external API.
  • In Switch Port Mapper, the Switch Name employs the resolved DNS name once DNS resolution occurs.
  • Previously, users received emails indicating new MAC addresses were detected, even for existing ones. This issue has been resolved.
  • Previously, there was an issue when renaming the IPAM tree node from its old name. This has now been fixed.
  • Previously, there were alignment issues in the exported PDF and CSV files of IP Details. This has now been fixed.

Build No: 12.8.261 - June 13, 2024

  • OpManager: Previously, under OpUtils' central dashboard, there was an issue with sorting widget columns. This has now been fixed.

Build No: 12.8.247 - May 14, 2024

  • Previously, users with inadequate access privileges could access the IP Address Manager & Switch Port Mapper data on the dashboard. This has now been fixed.
  • DHCP servers for Windows machines will automatically be discovered during the initial product setup.
  • Previously, users faced an issue during router scanning. This has now been fixed.
  • In scheduled reports, users can now view the location details in the "Subnet Usage Summary" and "IP Usage Summary" reports.
  • Previously, under Switch Port Mapper, users faced an issue with deleting switches due to discrepancies in the LHS tree data. This has now been fixed.
  • OpManager: Previously, there was an issue with the probe name being displayed on OpManager's central dashboard. This issue has been fixed now.
  • OpManager: Within OpManager, when navigated to the switch snapshot page within the network tab, users can view details such as connected devices in the interfaces tab and a comprehensive port view under the port view tab. This information is sourced from the SPM module, which becomes accessible when the IPAM & SPM add-on is activated in OpManager.
  • General: Previously, CSRF vulnerability (ZVE-2024-1132) was detected where the external users were able to utilize the network tools without authentication to perform ping or SNMP ping on network devices. This has now been fixed. (Reported by Jayateertha Guruprasad).

Build No: 12.8.188 - August 19, 2024

  • OpUtils: Previously, free users could add more than one switch for Switch Port Monitoring in the OpManager Probe, causing users to encounter a license violation page when logging in. This has been fixed now.

Build No: 12.8.182 - March 26, 2024

  • OpManager: Previously, in OpManager, within the Tools section under Trap Viewer, there was an issue with data display. This issue has now been resolved.
  • OpManager: Previously, in OpManager Central, users faced an issue with selecting a port from the switch snapshot while having "All probe" enabled. This has been fixed.
  • OpManager: Previously, in OpManager Central, on the switch snapshot page under Port View, the export function for switch port data was non-functional when all probes were selected. This issue has been fixed.
  • Previously, there was an issue where the group names list did not appear when updating users in OpManager User Management. This issue has now been fixed.
  • Previously, users faced an issue while creating a new node on the IP Address Manager or Switch Port Mapper Tree View. This issue has now been fixed.
  • Previously, there was a slowdown issue caused by an increase in thread count when scanning subnets too frequently or in bulk. This has now been fixed.
  • Previously, in OpUtils version 128168, under Toolset, in MIB Browser, users faced an issue with performing actions using the SNMPv3 credentials. This has now been fixed.

Build No: 128168 - February 27, 2024

  • While installing the product for the first time, integration into the Active Directory has been enabled for auto-discovered Domain and Domain Controller Name.
  • Under Active Directory in Settings, a new icon has been enabled to list the AD computers of selected domain in the AD's grid view.
  • Users can now edit DNS names under the IP details tab in the IP Address Manager module, and this name will be updated if the DNS servers provide new names for the corresponding IPs.
  • Under Routers, a display name column has been added to assign customizable names for easier router identification.
  • Previously, users encountered an issue with MIB browser slowness when dealing with a high number of retries and timeouts in SNMP credentials for non-SNMP devices. This issue has now been resolved.
  • Previously, when uploading a new MIB, its components were not updated in the tree view of the MIB browser. This issue has now been fixed.
  • Previously, there was an issue with finding the MIB name within the MIB file due to additional spacing during the MIBs upload. This has now been fixed.
  • Addressed missing nodes of the 'HOST-RESOURCES-MIB' and 'Cisco-Tc' default MIBs. Additionally, new MIBs (RMON-MIB, RMON2-MIB, and TOKEN-RING-RMON-MIB) have been introduced in the MIB Browser.M
  • Previously, in the OpUtils add-on, users faced an issue while discovering an IPv6 host. This has now been fixed.
  • Previously, users faced a slowness issue when marking IP status in the IP details section under the IP Address Manager. This issue has now been fixed.
  • General: Users can now rearrange columns, switch tabs without losing pagination, and save column sorting preferences.

Build No: 128104 - June 13, 2024

  • OpManager: A stored XSS vulnerability was discovered in Schedule reports. This has now been fixed.(Reported by Muhammed Mekkawy. Refer:ZVE-2024-4386).

Build No: 128100 - January 17, 2024

  • Previously, under the Switch Port Mapper module, users faced an issue with fetching VLAN details from Extreme Switch. This issue has now been fixed.
  • Previously, under the Switch Port Mapper module, users faced an issue with the switch scan when changing the SNMP version from SNMP version 1 to SNMP version 2. This issue has now been fixed.
  • Previously, MAC address of IPs associated with multiple network/subnet addresses were duplicated in email alerts. This issues has now been fixed.
  • Previously, under the IP Address Manager and Switch Port Mapper module, users were able to view only the details of the selected probes. It has now been enhanced by introducing an "All probes" option that displays a comprehensive list of details of all the probes.
  • The central IP Address Manager and Switch Port Mapper module has recently incorporated detailed reporting features.
  • Previously, in OpManager's switch snapshot page, there was an issue with the export function for switch ports. This issue has now been fixed.
  • Previously, when there was a mismatch in switch names between OpManager and Switch Port Mapper, the switch ports will not be displayed in the OpManager switch snapshot. This issue has now been fixed.
  • Previously, there was an issue with storing SNMP OID (Object Identifier) longer than 50 characters in the database during switch scanning. Now, the limit for storing SNMP OID in the database has been increased to 150 characters.
  • Previously, under IP Address Manager module, users faced an issue with fetching DHCP scope details for Fortinet DHCP servers. This issue is now fixed.
  • Email alert notifications from Switch Port Mapper will now include Sys Name of switches.
  • Previously, under the Settings tab in IP Address Manager and Switch Port Mapper module, there was an issue with creating a new custom column with an existing column name. This issue has been fixed now.
  • Previously, users faced an issue with the "All Unmanaged Ports" and "All Managed Ports" filter option within the Switch Port Mapper module's all switches' Ports tab. This issue has now been fixed.
  • Default sorting based on generated time for History and Alerts under the IP Address Manager and Switch Port Mapper module has been enabled.
  • Under the Rogue Detection module, default sorting for "Discovered At" and "Valid Till" has been enabled.
  • Default sorting of IP addresses in the IP list view under IP Address Manager and ifIndex in port view under Switch Port Mapper has been enabled.
  • Previously, under the Switch Port Mapper module, there was an issue with displaying the connected device information in the consolidated view of trunk port details. This issue has now been fixed.
  • Previously, searching for an IP or MAC address using the global search option did not display the left tree view and the corresponding subnet path. This issue has now been fixed.
  • Previously, under the Alarms tab in OpUtils, there were limitations in sorting and searching within the alarms table. This has now been enhanced.
  • Previously, in OpManager Central, when navigated to tree groups within the IP Address Management under the Network tab, the option to export reports was not functioning. This issue has been fixed.
  • Previously, within the IP Address Management, the header list when exporting reports, displayed "active-directory-name." It has now been updated to show "AD DOMAIN."
  • Previously, within the IP Address Manager and Switch Port Mapper module, when accessing the export through the group name/subnet/switch, the exported report will not include the group name/IP address/switch IP in its file name. This has now been fixed.
  • Under OpUtils reports, the "Connected IP details" report exports null values as "-" instead of empty spaces and it is sorted based on port number.
  • Previously, there was a discrepancy in the leased and reserved counts for Palo Alto DHCP server scopes under IP Address Manager. This issue has been resolved.
  • Previously, in the Network Monitoring tab under Networking Tools, there was an issue with deleting devices. Now this has been fixed.
  • Previously, within the IP Address Manager module, tree groups would duplicate when editing an approved subnet promptly.
  • Previously, under the IP Address Manager module, changes made to subnet details, such as subnet name and description, are not reflected in the subnet details after subnet approval.
  • SSH settings has been enabled under the OpUtils General Settings within the Settings menu.
  • General : Accessing the RestAPI via the Api key in the request parameter, is currently being deprecated and will be removed in a future release. Users with existing integrations using apiKey in the request parameter are advised to migrate the apiKey in the request headers to avoid any future impact.

Build No 127261 - December 22, 2023

  • General : Now, the Maverick package has been updated to version 1.7.56 in response to CVE-2023-48795.

Build No 127260 - December 11, 2023

  • General: Previously, path traversal vulnerability (CVE-2023-47211) was detected for MIB browser. This issue has now been fixed by implementing path sanitization, ensuring that a new MIB is stored exclusively under the "OpManager/mibs" directory.

Build No 127258 - October 31, 2023

  • Introducing OpUtils addon for OpManager MSP. Users can now enable hassle-free IP address and switch port management within their OpManager MSP console.
  • Previously, under IP Address Manager, users faced an issue with re-adding deleted DHCP servers. This has now been fixed.
  • Previously, under Switch Port Mapper, in Ports tab, users faced an issue with VLAN details being saved for unused or down ports. This has now been fixed.
  • Previously, under Switch Port Mapper, users faced an issue when the SNMP v3 engine ID of a switch has been changed, causing switch scans to fail. This has now been fixed.
  • Previously, users faced an issue with adding DHCP servers and routers using CLI credential. This has now been fixed.
  • Previously, under IP Address Manager, in DHCP Servers tab, users faced an issue with getting scope details from Palo Alto DHCP server. This has now been fixed.
  • Previously, under IP Address Manager, there was an issue with the Tree View's Scan Subnet option. This has now been fixed.
  • In IP Address Manager, network discovery is now simplified with automated DNS server discovery on first-time installation, enabling DNS resolution.
  • Previously, under IP Address Manager, in the Alerts tab, there was an issue with using the search option to filter DNS-> IP, Alert Generated Time, and Remarks fields. This has now been fixed.
  • OpManager: Previously, under Settings, in the OpUtils' Discovery tab, users faced an issue with the Active Directory tab being visible for Linux probes. This has now been fixed.

Build No 127242 - September 20, 2023

  • Introducing AD Users tab under Settings. This feature enables users to retrieve AD user details from the Active Directory. It also allows effortless tracking of AD user information associated with IP addresses. This can be achieved by simply hovering over the Logged On User field in the IP Details tab.

Build No 127241 - September 12, 2023

  • Previously, under Switch Port Mapper, in Port View tab, users faced an issue with the port groups resetting to it's default count (16) when the OpUtils service was restarted.
  • Previously, in the "Discovered Subnets" section under IP Address Manager's Tree View, users faced an issue where selecting a different Subnet Mask would change the Subnet Address and would not work when approving a subnet. This has now been fixed.
  • Under Switch Port Mapper, users can now also view the Sys Name of switches on the Tree View.
  • Previously, under Switch Port Mapper, in the Ports tab, users faced an issue with searching and sorting the Vendor column. This has now been fixed.
  • Previously, under IP Address Manager’s IP Details tab, users faced an issue with using the Authenticity options in the Filter dropdown . This has now been fixed.
  • Previously, under IP Address Manager’s IP Details tab, users faced an issue with marking IPs as Guest using the "Mark as" option. This issue has now been fixed.
  • Under Network, in the OpUtils add-on's IP Management tab, users can now add IPv4 and IPv6 subnets, supernets, and DHCP servers using the Add drop down button.
  • Previously, under IP Address Manager, while adding DHCP servers, users faced an issue with using a few special characters in the password field . This has now been fixed.

Build No: 127198 - September 11, 2024

  • OpUtils: Previously, users faced an issue during router scanning. This has now been fixed.
  • OpUtils: Previously, there was an issue with updating the Fortinet and Huawei routers using CLI device types. This issue has now been fixed.
  • OpUtils: Previously, users received emails indicating new MAC addresses were detected, even for existing ones. This issue has been resolved.
  • OpUtils: Previously, there was an Out Of Memory (OOM) issue in Cisco switches caused due to large number of VLAN IDs. This has now been fixed.
  • OpUtils: Previously, under Reports, in the IP Request tool, users faced an issue with selecting Available IPs from the Preferred Subnet, when using the console in non-english languages. This has now been fixed.
  • OpUtils: Previously, under IP Address Manager, there was an issue with updating non-English data to Alias name, Asset Tag and Sys Location on IP edit page. This issue has been fixed.

Build No: 127196 - March 25, 2024

  • OpManager: Previously, if devices were double-encrypted with SNMP community encryption, there were problems in device actions. This issue has been fixed now.
  • OpManager: Previously, when SDP was configured with a very older version of OpManager, there was an issue when users tried to log in, after OpManager was upgraded. This issue has been fixed now.
  • OpManager: Previously, while creating custom monitors, if users choose a functional expression, even if decimal data type was selected, only the integer part of the decimal data type was being considered. This issue has been fixed now.
  • OpManager: Previously, during certain instances for agent-monitored devices, the CPU utilization monitor's data was not being stored when it's alternate OID 'CPU Utilization ProcessorInformation' was being used on threshold-enabled cases. This issue has been fixed now.
  • OpManager: Fixed the device availablity false alerts, that were previously being raised for agent-monitored devices, when their data transfer request failed.
  • OpManager: Previously, there was an issue with the probe name being displayed on OpManager's central dashboard. This issue has been fixed now.
  • OpManager: Previously, in OpManager Central, users faced an issue with selecting a port from the switch snapshot while having "All probe" enabled. This has been fixed.
  • OpManager: Previously, in OpManager Central, on the switch snapshot page under Port View, the export function for switch port data was non-functional when all probes were selected. This issue has been fixed.
  • Previously, there was an issue where the group names list did not appear when updating users in OpManager User Management. This issue has now been fixed.
  • Previously, users faced an issue while creating a new node on the IP Address Manager or Switch Port Mapper Tree View. This issue has now been fixed.
  • Previously, under IP Address Manager and Switch Port Mapper modules, there was an alignment issue with the Alerts tables. This has now been fixed.
  • Previously, there was a slowdown issue caused by an increase in thread count when scanning subnets too frequently or in bulk. This has now been fixed.

Build No 127193 - January 24, 2024

  • General : Previously, path traversal vulnerability (CVE-2023-47211) was detected for MIB browser. This issue has now been fixed by implementing path sanitization, ensuring that a new MIB is stored exclusively under the "OpManager/mibs" directory.

Build No 127142 - January 04, 2024

  • General : Now, the Maverick package has been updated to version 1.7.56 in response to CVE-2023-48795.
  • General: Previously, path traversal vulnerability (CVE-2023-47211) was detected for MIB browser. This issue has now been fixed by implementing path sanitization, ensuring that a new MIB is stored exclusively under the "OpManager/mibs" directory.

Build No 127134 - August 04, 2023

  • Previously, under IP Address Manager, users faced an issue with scanning DHCP servers when there are two or more DHCP servers with the same scope. This has now been fixed.
  • Previously, under Switch Port Mapper, users faced an issue with retrieving the port details when the Sys OID is empty during a CISCO switch scan. This has now been fixed.
  • Previously, under IP Address Manager, in IP Details tab, users faced an issue with importing IP address details while using a few special characters. This has now been fixed.
  • Previously, there was an issue with scanning routers when the SNMP Retries and SNMP Time Out values are high. This has now been fixed.
  • Previously, under Toolset in Address Monitoring's MAC IP List tab, the Export button was not working. This has now been fixed.
  • Previously, in OpUtils add-on's Address Monitoring tools under Toolset, users faced an issue with the IP address and MAC address columns not getting displayed when exporting MAC IP List. This has now been fixed.
  • Previously, under IP Address Manager's IP History tab, users faced an issue with exporting a single subnet's data. This has now been fixed.
  • Previously, under Rogue Detection, users faced an issue with viewing the status banner while updating or deleting MAC address details. This has now been fixed.
  • Previously, under Settings -> OpUtils -> Scheduler, in the IP Address Manager tab, users were not able to schedule scans for IPv6 addresses. This has now been fixed.
  • Previously, under Network Monitoring Tools, in Bandwidth Monitor , users faced an issue with the auto refresh option while discovering new interfaces. This has now been fixed.
  • Previously, under Toolset in CLI Query Tool, users faced an issue where the default SSH port value was displayed as 23 instead of 22. This has now been fixed.
  • Previously, under Toolset, in MIB Browser, users were not able to retrieve or add Object IDs for nodes which had more than 100 character length. The length has now been increased to 250.
  • Previously, under IP Address Manager, in Donut View, there was an issue in the Filter by tab, when clicking on the Available segment of the Donut View. This has now been fixed.
  • Under IP Address Manager, in Subnet Summary tab, we've enhanced the Edit Custom Columns's drop down style.
  • Previously, under IP Address Manager, Switch Port Mapper, and Alarms's Donut View, users faced an issue with the filter values while selecting a donut segment. This has now been fixed.
  • Previously, under Alarms, users faced an issue with unselecting subnets or switches while using the filter. This has now been fixed.
  • Previously, under Networking Tools, in Network Monitor, users faced an issue with the filter values while using the status tab filter. This has now been fixed.
  • Previously, under Switch Port Mapper, users were not able to delete switches from the Tree View. This has now been fixed.
  • Previously, under Reports, in the IP Request tool, users faced an issue with selecting Available IPs from the Preferred Subnet, when using the console in non-english languages. This has now been fixed.
  • Previously, in OpManager Central, under Dashboard, the IPAM and SPM Widgets were displayed when creating a New Dashboard, even if the user does not have access to the IPAM and SPM add-on. This has now been fixed.

Build No 127124 - January 04, 2024

  • General : Previously, path traversal vulnerability (CVE-2023-47211) was detected for MIB browser. This issue has now been fixed by implementing path sanitization, ensuring that a new MIB is stored exclusively under the "OpManager/mibs" directory.

Build No 127117 - June 16, 2023

  • OpManager-EE : Users can now view OpUtils summary widgets in OpManager Central's dashboard.
  • Under Rogue Detection Settings, OpUtils now includes an option to display trunk switch port details in the Rogue Detection module.
  • Under Switch Port Mapper Settings, OpUtils now includes an option to exclude trunk switch port details while exporting port details from the Switch Port Mapper module.
  • Under IP Address Manager, users can now select the required SNMP credential while subnet discovery to retrieve tracked IP's SNMP details.
  • Under IP Address Manager, in the sample CSV file given under the Import From CSV tab, the Scan and AD Domain columns have been removed.
  • Previously, in Discovery tab under Settings, users were not able to view the data tables in Routers and Active Directory for non-English languages. This issue has now been fixed.
  • Previously, under Switch Port Mapper, Last Scan Time was not updated in the central server. This issue has now been fixed.
  • Previously, under Reports, users faced an issue where they received reports for available IP addresses instead of used IP addresses when scheduling IP Usage Summary reports. This issue has now been fixed.
  • Previously, under OpUtils add-on's Switch Port Mapper Tree View in OpManager and NetFlow Analyzer, users faced an issue with viewing the list of switches when clicking on a Tree View group. This issue has now been fixed.
  • Previously, under Switch Port Mapper, users faced an issue where the authentication failed when fetching port details for Cisco VLANs(1002,1003,1004,1005,4094) while scanning switches. This issue has now been fixed.

Build No 127101 - May 11, 2023

  • Introducing Discovery tab under Settings. Users can now access discovery settings for SNMP credentials, Routers, and Active Directory within this tab.
  • Previously, users faced an issue with accessing the WMI Query tool. This issue has been fixed.
  • Previously, under Scheduler Report, users faced an issue with editing the Schedule Time field. This issue has now been fixed.
  • Previously, while using the UpdateIPState API, there was an issue in executing the POST method using an IP. This has now been fixed.
  • Previously, under Switch Port Mapper, there was an issue with sorting the Vendor column. This issue has now been fixed.
  • Previously, under IP Address Manager, on discovering Palo Alto firewall DHCP servers, users faced an issue with updating the default retry value. This has now been fixed.
  • Previously, on using global search to identify subnets, incorrect subnet mask was displayed for /32 subnets. This issue has now been fixed.

Build No 126311 - March 31, 2023

  • We've extended capabilities to support SNMP v3 for tools under Toolset including Proxy Ping, MAC Address resolver, DHCP Scope Monitor, System Explorer, TCP Reset, SNMP Walker, Device Scan, and Device Explorer.
  • Previously, under IP Address Manager, there was an issue with sorting Custom Column values. This has now been fixed.
  • During IP subnet details import via CSV files, OpUtils automatically removes the restricted special characters in the imported data fields.
  • Previously, there was an issue while exporting IPAM, Switch Port Mapper and Rogue Detection module data from OpManager central. This issue has now been fixed.
  • Previously, users faced an issue with adding switches using SNMP v1 credentials. This issue has now been fixed.
  • Previously, on using global search to identify a subnet, there was an issue with accessing its associated IP snapshot page. This issue has now been fixed.
  • Previously, under Switch Port Mapper's Port History tab, there was an issue with exporting the tracked data. This issue has now been fixed.
  • Under Switch Port Mapper's Port View, users can now configure up to 52 ports.

Build No 126290 - February 10, 2023

  • Under IP Address Manager, users can now modify the Custom Column values when adding, editing, or approving subnets.
  • Previously, there was an issue in restoring Custom Column data from database backups. This issue has now been fixed.
  • The ability to edit comments has now been introduced under the Rogue Detection module.
  • Previously, in the OpManager's Network module, under IP Management's Switches tab, on discovering new switches users were redirected to an unauthorized page. This issue has been fixed.
  • Previously, in auto-published IP Address Manager CSV reports, column headers were repeated every 100 rows and there was an alignment issue with displaying comma-separated IP details data. These have now been fixed.
  • For enhanced security, two-factor authentication(TFA) has been made mandatory to import trusted MAC addresses, block or unblock switch ports, and modify ifAlias names.
  • OpUtils actions including remote port blocking and wake on LAN capability have been added to OpManager Workflow.
  • On adding routers and DHCP servers, under CLI Settings ->Protocol, SSH has been made the default option.
  • The "NIC type" table has been updated to match the IEEE OUI list.

Build No 126264 - February 22, 2023

  • Previously, on migrating from builds 12.5 and lower, users faced some issues with subnet scanning. This has now been fixed.

Build No 126262 - January 04, 2023

  • Previously, there was an issue with collecting ARP data from Huawei devices with CLI. This has now been fixed.
  • There was an XSS vulnerability issue in the Tree View under IP Address Manager and Switch Port Mapper. This issue has been fixed.

Build No 126167 - October 21, 2022

  • Previously, under IP Address Manager and Switch Port Mapper, there was an issue with adding non-English data to the Custom Columns in PostgreSQL. This issue has been fixed
  • Previously, duplicate switch entries were made in OpUtils, when a switch was added with different DNS names from OpManager. This issue has been fixed.
  • Previously, audit entries were not made when switches were added from OpManager. This issue has now been fixed.
  • General: Previously, users were unable to load the Trap Forward tool page. This issue has been fixed.
  • Previously, users with custom roles could not access the probe servers list from OpManager Central's console. This issue has been fixed.
  • Previously, under OpUtils, in Scheduler, users were able to edit or delete default scanning tasks. This issue has now been fixed.

Build No 126165 - October 14, 2022

  • General: To enhance security, changes have been done in the Installshield for Linux builds.

Build No 126149 - September 23, 2022

  • Previously, under Network Monitor, there was an issue with viewing and managing the polling interval using the time window. This issue has been fixed.
  • In Scheduler, the minutes option to set up scan schedules in minutes has been removed to optimize CPU memory consumption.
  • Under Schedule Reports, Publish on Server option has been removed for security reasons.
  • For enhanced security, Two factor authentication has been made mandatory for uploading config files to devices, updating system details, resetting TCP connection, and executing CLI queries.
  • Previously, users faced issues with the drag and drop functionality of the IPAM & SPM add-on's node tree. This has now been fixed.
  • Previously, users with insufficient scopes were able to export reports on all managed resources. This issue has been fixed.

Build No 126147 - September 12, 2022

  • General : PostgreSQL has been upgraded to version 10.21. The PostgreSQL vulnerability issues from 10.20 have been fixed now.
  • General : PostgreSQL JDBC Driver has been upgraded to version 42.4.0. The PostgreSQL JDBC Driver vulnerability issues from version 42.2.2 have been fixed now.
  • General : SAML Authentication can now be configured with email address NameId format, to authenticate users based on the email address configured under the User Management page.
  • General : Fixed the unreliable data deserialization vulnerability in the XML-RPC jar files by removing the concerned dependency.

Build No 126130 - August 4, 2022

  • Introducing IP Requesting tool. Enabling the ability to raise, view, track, and approve IP requests within the OpUtils console.
  • You can import switch port details from a CSV file using the 'Import Switch Port Details' option available under the Port Details tab.

Build No 126120 - July 29, 2022

  • General: Earlier, there was a Remote Code Execution (RCE) vulnerability in IPv6 address management (CVE-2022-37024) and IPv4 address management (CVE-2022-38772) reported by an anonymous working with Trend Micro Zero Day Initiative. This has been fixed now.

Build No 126118 - July 27, 2022

  • General: A vulnerability resulted in unauthenticated access of the user API key. This issue has been fixed now. (Reported by Anonymous working with Trend Micro Zero Day Initiative. Refer: CVE-2022-36923)

Build No 126115 - July 13, 2022

  • OpUtils now audits, actions carried out with System Explorer tool.

Build No: 125000 to 126000

Build No 126000 - June 14, 2022

  • General: Antisamy has been upgraded to version 1.6.4.

Build No 125659 - August 11, 2022

  • General : There was an issue with loading the NOC page in Embed view. This issue has been fixed now.

Build No 125656 - July 25, 2022

  • General: Users have the option to skip TFA now. Option to disable Two Factor Authentication is now available.

Build No 125650 - May 25, 2022

  • Previously, under IP Address Manager, there was an issue with adding approved subnets under existing supernets. This has been fixed.
  • Previously, under Settings, in the Network Monitor tab, there was an issue with displaying the configured Alert Rule values. This has been fixed.
  • Previously, under Config File Manager, users faced some challenges in taking configuration backups. This has now been fixed.
  • Previously, on adding new subnets / switches, the selected tree groups were not displayed as the preferred 'Group Name' option by default. This issue has now been fixed.
  • Previously, under IP Address Manager, there was some inconsistency with the number of total IPs and scopes displayed by the monitored Fortinet DHCP server. This issue has now been fixed.
  • Previously, there was an issue with collecting ARP data from PaloAlto devices with CLI. This has now been fixed.

Build No 125617 - April 01, 2022

  • The 'Clean up Policy' tab under Settings has now been renamed to 'Data Retention' as it helps you configure the data retention policy.
  • Switch Port Mapper module now displays the vendor name of managed switches and devices connected to monitored ports.
  • You can now add and monitor /32 subnets with OpUtils' IP Address Manager.
  • Previously, users were unable to delete all the IPs listed in the System Details Update tool. This issue has been fixed.
  • Previously, in Central, there were some issues with the group level snapshot tab. These issues have now been field.
  • Previously, there was an issue with accessing the switch port links logged in the Switch Port Mapper email alert. This issue has been fixed.
  • Field validation has been enabled for all CSV file imports to avoid CSV injection.
  • Input field validation has been enabled to avoid XSS vulnerabilities in SNMP Tools.

Build No 125606 - August 04, 2022

  • General: A vulnerability resulted in unauthenticated access of the user API key. This issue has been fixed now. (Reported by Anonymous working with Trend Micro Zero Day Initiative. Refer: CVE-2022-36923 )
  • General: Earlier, there was a Remote Code Execution (RCE) vulnerability in IPv6 address management (CVE-2022-37024) and IPv4 address management (CVE-2022-38772) reported by an anonymous working with Trend Micro Zero Day Initiative. This has been fixed now.

Build No 125568 - February 24, 2022

  • General : The upgrade process failed in secondary failover setup due to an issue. This issue occurs when upgrading from builds below 125561. This issue has been fixed.

Build No 125596 - February 08, 2022

  • Previously, under IP Address Manager's IP Details tab, users were unable to empty the fields of Custom Columns. This issue has been fixed.
  • Previously, Under Switch Port Mapper, there was an issue with exporting port level data. This issue has been fixed.
  • You can view more than 1000 results on using SNMP GET operations in MIB Browser.

Build No 125581 - January 13, 2022

  • There was an XSS vulnerability issue in the subnet details of subnets monitored using IP Address Manager, as reported by Hazem. This issue has been fixed.

Build No 125475 - January 10, 2022

  • Previously, in the Japanese installations some text were displayed in Chinese. This issue has now been fixed.
  • Previously, under MIB Browser, MIB Names were not sorted in order. This issue has now been fixed.

Build No 125564 - December 29, 2021

  • Under IP Address Manager, Switch Port Mapper, and Alarms tab, you can now view Logged on User details of AD users logging in to your monitored network devices.
  • In the Community Checker tool, write community of a given IP address is now displayed only on selecting the 'Check the Write Community' option.
  • The storage location of Config File Manager's back-up files has been changed.
  • Previously, in the Japanese installations some text was displayed in Chinese. This issue has now been fixed.
  • Mib Names were not in sorted order in Mib Browser. This issue has now been fixed.

Build No 125459 - December 24, 2021

  • General: Low privileged users were able to access Support Module (Reported by Ranjit Pahan). This issue has been fixed.

Build No 125490 - November 26, 2021

  • Previously, under IP Address Manager, users faced issues with editing multiple IP addresses. This issue has been fixed.
  • NetFlow: The loading speed of device summary page has been improved.
  • OpManager: Previously, there was an issue in listing the monitored subnets, in OPM central. This issue has been fixed.
  • The authentication issue in very few of OpUtils modules' audit directories has been fixed. (Refer CVE-2021-44514)

Build No 125485 - October 21, 2021

  • General: Two-Factor Authentication, when enabled, will be applicable for Mobile App login also.

Build No 125483 - October 12, 2021

  • General : Low privileged users were able to access mail server details(Reported by Ranjit Pahan). This issue has been fixed.

Build No 125471 - October 1, 2021

  • You can now add and manage overlapping IP subnets with OpUtils.
  • There was an XSS vulnerability issue in the Task Name of Scheduler in Switch port Mapper. This issue has been fixed.
  • There was an XSS vulnerability issue in the Task Name of Scheduler in IP Address Manager. This issue has been fixed.

Build No 125467 - September 17, 2021

  • In OpManager, visual enhancements has been made to the Port View snapshot page.
  • Under IP Address Manager, in the managed DHCP servers, you can now update Scope Name and Comments.
  • Under IP Address Manager, while approving subnets, the option to edit subnet mask has been enabled.
  • Previously, Under Switch Port Mapper, there was an issue with viewing rows in the Port View grid. This issue has been fixed.

Build No 125451 - August 31, 2021

  • Previously, under IP Address Manager and Switch Port Mapper, there was an issue with the devices accessed by users with insufficient scopes. This issue has been fixed.
  • Previously, in the published Switch Port Mapper reports, there was an issue with displaying last scan time. This issue has been fixed.
  • Previously, special characters were not accepted as Custom Column names. This issue has been fixed.
  • The Trace Route tool under Toolset is now displayed as TraceRoute.
  • Previously, under Switch Port Mapper, the trunk port snapshot page went blank on handling large number of associated MACs or IPs. This issue has been fixed.
  • Previously, there was an issue with the Switch Port Mapper's tree group, on accessing a port from the Port View of OpManager's switch snapshot page. This issue has been fixed.
  • Previously, under Switch Port Mapper Tree View, there was an issue in creating tree groups on importing switches through CSV files. This issue has been fixed.
  • Previously, in OpManager, there was an issue with loading switch port details when switches were added using different DNS servers. This issue has been fixed.
  • Previously, in the IP Address Manager and Switch Port Mapper Tree View, there was an issue in expanding and collapsing tree nodes. This issue has been fixed.
  • Previously, Switch Port Mapper's Switch page flickered when a scan was triggered and completed. This issue has been fixed.

Build No 125449 - August 23, 2021

  • Access to User Management settings has been blocked for OpUtils users who were assigned User Scopes by the administrator

Build No 125429 - July 13, 2021

  • OpUtils now supports User Scoping. You can now configure OpUtils to allow user appropriate access to IP Address Manager & Switch Port Mapper's tree groups.
  • Recently, under IP Address Manager, there was an issue with the default addition of the local subnet. This issue has been fixed.
  • You can now import DNS name and IP status of IP addresses, using the 'Import IP Address Details' option under IP Details tab.
  • Previously, on editing, Custom Column values did not accept special characters. This issue has been fixed.

Build No 125412 - June 14, 2021

  • OpUtils now aids network route aggregation, by enabling support for IP supernet monitoring.

Build No 125399 - June 1, 2021

  • General : User Management now supports custom role creation.
  • General : Previously, Add-On Modules were enabled/disabled globally. Enabling/disabling Add-On Modules is now user specific.
  • General : Users can now choose to show/hide Add-On Modules for which they have been authorized.
  • General : There was an issue when restoring backup during MSSQL installation after the 125301 upgrade. This has now been fixed.

Build No - 125395 - May 18, 2021

  • Apart from the IP routing table and DHCP server lookups, now OpUtils can also discover subnets from LipRouting tables, in case of Cisco devices.
  • Previously, AD users experienced an issue with IPAM and SPM's grid export functionality. This has now been fixed.
  • Previously, on deleting a collector there was an issue with updating it in the NFA central's IPAM add-on license count, which caused difficulty in user login . This issue has been fixed.
  • Previously, there was an issue with adding switches to Switch Port Mapper due to the SNMP v3 encryption method used. This issue has been fixed.

Build No - 125381 - April 30, 2021

  • You can now identify IP Conflicts using IP Address Manager
  • Previously, in the Switch Port Mapper tree view, when a large number of tree groups were present, there was an issue in renaming the top group name ('Your Company'). This issue has been fixed.
  • Previously, there was an issue with adding the same group to be managed under two different parent groups. This issue has been fixed.
  • Previously, under Switch port mapper, on importing switches to be managed, there was an issue in the order of which tree view groups were created. This issue has now been fixed.
  • Previously, there was an issue with scanning Palo Alto firewall devices in routers. This issue has now been fixed.

Build No - 125363 - April 01, 2021

  • General : XSS vulnerability in the SNMP Ping tool under Toolset has now been fixed.
  • General : XSS vulnerability in the Trace Route tool under Toolset has now been fixed.
  • General : XSS vulnerability in the Community Checker tool under Toolset has now been fixed.
  • Previously users with Operator roles were able to add schedulers using API. This access has been restricted now.
  • Previously users with Operator roles were able to delete alerts using API. This access has been restricted now.
  • Users can now export grid details along with Custom Columns.
  • Previously, under Switch Port Mapper, there was an issue with the managed groups' visibility, on renaming the top most group of the Tree View. This issue has been fixed.
  • Issues with scanning SNMP v3 switches have now been fixed.

Build No - 125362 - March 26, 2021

OpManager: SparkGateway package has been upgraded to the latest version (SparkGateway 5.9.0) due to a path traversal vulnerability reported by David. (Refer: CVE-2021-20078 )

Build No - 125357 - March 04, 2021

  • OpUtils now supports Fortinet DHCP server monitoring and subnet discovery, under IP Address Manager.
  • For licensed users, OpUtils add-on trial license is now displayed in their OpManager set-up.
  • Previously, Under Switch Port Mapper in the switch snapshot, there was an issue in listing port history. This issue has been fixed.
  • Previously, under IP Address Manger, tree view was not available for customers with trial add-on license. The feature has now been enabled.
  • Previously, there was an issue in filtering switches by vendor name. This issue has been fixed.

Build No - 125329 - February 02, 2021

  • General : There was an unauthenticated Remote Code Execution (RCE) vulnerability due to general bypass for the deserialization class, as reported by Johannes Mortiz. This has now been fixed. (Refer CVE-2021-3287)
  • OpUtils now supports Cisco DHCP server monitoring, and subnet discovery, under IP Address Manager.
  • Previously, in OpUtils' standalone version, the auto login option was not enabled in AD Authentication. This issue has been fixed.
  • Previously, on editing the router credentials, there was an issue in saving the updated values. This issue has been fixed.

Build No 125233 - 125311 - December 31, 2020

  • Previously, there was a lag in displaying the results of IPAM and SPM's global search option. This issue has been fixed.
  • Previously, there was a lag in displaying "Connected IP Details" report. This issue has been fixed.
  • Previously, there was an issue in adding switches in SPM if their credential name included "+" character. This issue has been fixed.
  • Previously, subnets couldn't be added in the Custom Groups created. This has been fixed.
  • Previously, there was an issue with marking multiple ports as Administratively Enabled / Disabled. This issue has been fixed.
  • Previously, DNS Name was not shown in Reserved Static IP Addresses' report. This data is now shown.
  • Export option has been enabled for all the data sheets under Rogue Detection.
  • Previously, in SPM Publish Reports, unmanaged ports were shown. This has been removed.
  • Introducing OS Type report, to list OS types of managed IPs.
  • You can now see NCM and OpUtils data in OpManager central.
  • Previously, in build 125213 or above, there was an issue with listing subnets if Custom Columns have been configured. This issue has been fixed.
  • IP Address Manager now supports Palo Alto Firewall DHCP servers and ISC DHCP Servers for subnet discovery.
  • AD password field length has been increased to 100 from 50.
  • Under IPAM, 'DNS Server Name' field length has been increased to 250 from 50.
  • Under IP Address Settings, option to exclude specific MACs from being monitored to alert a change in MAC-IP combination, is now available.

Build No - 125233 - November 16, 2020

  • Previously, in build 125213 or above, there was an issue with listing subnets if Custom Columns have been configured. This issue has been fixed.

Build No 125213 - September 14, 2020

  • General: Previously, there was a thread lock issue that sometimes caused the product to not function as intended. This issue has now been fixed.

Build No - 125212 - September 09, 2020

  • General : jQUERY has been migrated to version 3.5.1 to avoid vulnerabilities.
  • Previously, under MIB Browser, there was an issue in uploading MIB files. This has been fixed.
  • Previously, under Port View of the Switch Snapshot, all ports were green. This issue has been fixed.
  • Previously, on using high number of Custom Columns users were unable to update its values. This issues has been fixed.
  • Previously "Add to SPM" option in the OpManager Device List page was not working, when more number of devices were selected. This issue has been fixed.
  • Previously, there was an issue with filtering ports in group view of the Switch Snapshot. This issue has been fixed.
  • Previously, under Rogue Detection, the IP Search option was not working. This issue has been fixed.

Build No - 125194 - August 07, 2020

  • Previously, devices were duplicated when imported using CSV in Config File Manager. This issue has now been fixed.
  • Previously, the success message after importing devices was not shown in Config File Manager. This issue has now been fixed.
  • Previously, under Network Tools, left dial filter was not working properly as expected. This has been fixed now.
  • Previously, in Global search, SPM API URL hanged when large number of entries were in database. This issue has now been fixed.
  • Under Settings -> Routers, additional CLI commands have been enabled to get ARP data for Cisco devices.
  • Under IP Address Manager, the option to delete all discovered subnets has been enabled.
  • The "NIC type" table has been updated to match the IEEE OUI list.

Build No - 125180 - July 24, 2020

  • General: Previously, there was a login issue in the mobile app when Passthrough was configured in OpManager. This has now been fixed.

Build No - 125162 - June 29, 2020

  • Previously, there was an issue with updating "VLAN Name" for Cisco SNMP v3 switches. This issue has been fixed.
  • Switch scan failure occurred when the VLAN name and ifAlias had non English characters. This issue has been fixed.
  • The option to filter and view IP address and switch port details has been brought back as a sub section, below the network details section of IPAM and SPM.
  • Users will now be able to configure Failover in OpUtils with a Virtual IP Address.

Build No - 125149 - July 21, 2020

  • OpManager: An issue while viewing the short summary page of an alarm in the external monitor is fixed.
  • OpManager: Unable to redirect to Device Snapshot Page from the Short Summary page of an alarm. This issue has been fixed.

Build No - 125138 - May 12, 2020

  • In the release 12.5.114, under Switch Port Mapper, the Ports page failed to load due to Jquery Migration. This issue has been fixed.
  • Under Networking Tools, option to block or unblock unicast and broadcast packet collection is now available under Settings -> OpUtils -> Bandwidth Monitor.
  • Links to Knowledge Base providing better understanding, are now added under IP Address Management and Ports page.
  • General: In the MIB Browser page under Tools, The XSS vulnerability issue in add credential has been fixed.

Build No - 125129 - July 6, 2020

  • General: After upgrading the product, there was an "Unable to start the product" error. This issue has now been fixed.
  • General: Previously, the backup functionality was not working for non-English installations. This issue has now been fixed.

Build No - 125125 - April 29, 2020

  • General: Path Traversal vulnerability in URLs starting with <cachestart> has now been fixed (Refer CVE-2020-12116).

Build No - 125120 - April 16, 2020

  • General: Unauthenticated access to API key disclosure from a servlet call. CVE-2020-1820 - @kuncho, an independent Security Researcher, has reported this vulnerability to SSD Secure Disclosure program. The issue has been fixed.

Build No - 125119 - April 13, 2020

  • The Wake On LAN tool under Networking Tools, is now brought back to facilitate booting up of one or more computers using a network message
  • Alerts is now integrated as a common view in Network Monitor under Networking Tools, refurbished with graphical filters.
  • Previously, On adding Custom Columns under SPM, global search failed. This issue has been fixed.
  • Under DHCP Scope Monitor, alerts were generated when scopes disabled. These alerts are now ignored.

Build No - 125108 - March 04, 2020

  • Earlier under Switch Port Mapper - port view, 16 ports were displayed by default in a port block. This can now be customized.
  • Previously under IP Address Manager, clicking on a group in the tree view redirected to the Subnet Summary page. It has now been configured to redirect to Subnet Details page.
  • Previously, there was duplication of port details in email alerts generated under Switch Port Mapper. This issue is now fixed.
  • Under Rogue Detection, there was an issue in showing switch details when clicking on a MAC address. This issue is now fixed.
  • Previously, to move nodes between the groups you would have to manually update the node to the desired group. Now you can drag and drop nodes between groups.
  • Option to delete all devices in the Rogue Detection tool has been provided.
  • You can now apply Subnet based filtering on devices under Rogue Detection tab.
  • Every data sheet in the Switch Port Mapper is now provided with export options.
  • The "NIC type" table has been updated to match the IEEE OUI list.
  • Option to delete all discovered subnets in the IP Address Manager tool has been provided.
  • Under IP Address Manager, the reasons for DHCP scan failure is now displayed on hover.
  • The UI of DHCP Summary page under the IP Address Manager is updated.
  • General: The obsolete code causing Remote Code Execution vulnerability in Mail Server Settings v1 APIs have been removed.

Build No: 124000 to 125000

Build No - 125000 - February 19, 2020

  • General: PostgreSQL has now been migrated to version 10.10.
  • General: The PostgreSQL vulnerability issues from version 9.2.4 have now been fixed.

 

Build No - 124196 - April 29, 2020

  • General: Path Traversal vulnerability in URLs starting with <cachestart> has now been fixed (Refer CVE-2020-12116).

Build No - 124188 - April 20, 2020

  • General: Unauthenticated access to API key disclosure from a servlet call. CVE-2020-1820 - @kuncho, an independent Security Researcher, has reported this vulnerability to SSD Secure Disclosure program. The issue has been fixed.

Build No - 124181 - January 28, 2020

  • OpManager: Previously, the users were able to read the Arbitrary file. This file read vulnerability has now been fixed.

Build No - 124177 - January 16, 2020

  • The IP Address Manager tool is enhanced with the capability of generating email alerts based on DHCP & product reservation change of IP Address(es).
  • Under IP Address Manager, you can now approve the discovered subnets in bulk using the 'Approve' option provided at the top.
  • Every data sheet in the IP Address Manager is now provided with export options.
  • On hovering over the tree view in IP Address Manager and Switch Port Mapper, a tooltip summary specific to that node will be displayed.
  • The license violation message has been revamped for OpUtils add-on.

Build No - 124172 - March 11, 2020

  • General: The obsolete code causing Remote Code Execution (RCE) vulnerability in Mail Server Settings v1 APIs have been removed. (Reported by Jason Nordenstam) (Refer: CVE-2020-10541)

Build No - 124168 - December 31, 2019

  • Alarms page has been completely revamped for better user experience.
  • Previously, auto-login was not working when the special character '&' was present in the username or password. This issue has now been fixed.
  • The JCE compatibility issue that occurred during PPM migration has now been fixed.
  • Under Mail Server Settings, the length of the 'User Name' field has now been increased from 50 to 100 characters.
  • Under User Management, the maximum length of the 'Password' field has now been increased from 25 to 100 characters.
  • In the MAC IP list page under Toolset, Export option has now been provided at the top of the page next to the filter option for easier access.
  • In the Routers page under Settings, the XSS vulnerability affecting 'Import CSV' has now been fixed.
  • Under Reports, the loading speed of the IP report pages and the Port report pages have been optimized.
  • The loading speed of the IP Address tab under DHCP servers has now been optimized.
  • In IP Details tab, the 'Authenticity' value was allotted as 'Trusted' by default. This has been fixed and has now been set to 'None'.
  • There were issues with the option to edit custom column name in the device snapshot page. This issue has now been fixed.
  • In the device snapshot page, there were issues with the option to edit the 'Physical location'. This has now been fixed.
  • In OpManager Plus, the Network tab was not highlighted when being redirected to an IP's snapshot page. This has now been fixed.
  • There were alignment issues with the Quicklinks in the IP Address Manager snapshot page. This issue has now been fixed.
  • In the IP Address Manager snapshot page, the scrollbar in each grid section has been removed.
  • The UI of IP Address Manager page has now been enhanced to provide better user experience.
  • The Switch Port Management page has been completely revamped to provide better user experience.
  • Under the Quicklinks section, links to the Roadmap page and 'Need more features' page has been added for easier access.
  • OpUtils Support page usability has been enhanced with more details.

Build No - 124100 - November 5, 2019

  • Previously, there was an issue in loading the IP details for IPs having a virtual MAC address. This issue has now been fixed.

Build No - 124099 - October 30, 2019

  • Weaker file permission for Nipper file has been fixed (CVE-2019-17421 - bug found by: Guy Levin (@va_start))

Build No - 124098 - October 23, 2019

  • In Settings, the 'Router' page UI has been updated and an option for discovering subnets has been added.
  • In the IP Address tab under DHCP Server, an option to filter IPs based on DHCP server address has been added.
  • Previously, the 'Trap Receiver' tool had issues with receiving SNMP v3 traps. This has now been fixed.
  • In Toolset, the SNMP Walker tool has been moved from under 'Network Monitoring' to 'SNMP Tools'.

Build No - 124086 - September 23, 2019

  • For better user experience, the IP Address Management's UI has been enhanced.

Build No - 124083 - September 12, 2019

  • Issue in high CPU utilization while scanning a DHCP Server via Scheduler has been fixed.
  • Previously, all the tools in OpUtils were restricted to users with Operator access. Now the restriction is limited to only certain tools.
  • The IPAM settings has been enhanced with an option to configure scan settings. It helps to scan devices with high latency connection. 

Build No - 124079 - November 26, 2019

  • Weaker file permission for Nipper file has been fixed (CVE-2019-17421 - bug found by: Guy Levin (@va_start))

Build No - 124067 - August 9, 2019

  • The mail ID validation issue has now been fixed.

Build No - 124055 - July 24, 2019

  • Previously, SNMPv3 switches were not added in OpUtils when scanning is done in OpManager's snapshot page. The issue is fixed now.
  • In Bandwidth Monitor tool, issue in adding the devices which are not support SNMP version 1 has been fixed now.
  • Issue in performing scheduled scans in Cisco config file manager has been fixed.
  • Under Settings -> OpUtils, issue in updating the syslog settings has been fixed.
  • Under the Ports section of switch snapshot page, the dropdown filters options such as Multiple Device and Virtual IP Device were not working. The issue is fixed now.
  • Under Reports, the sorting of "Last Change Time" column in switch port mapper's 'Port by Operation Status Last Change Time' report was not working. The issue is fixed now.

Build No - 124043 - July 02, 2019

  • General: You can now edit, re-arrange and hide the default tabs in the horizontal menu. New custom tabs can also be added, edited, rearranged and deleted from the horizontal menu.

Build No - 124031 - Jun 04, 2019

  • Under Switch Port Mapper tool, an option to choose only the necessary columns has been added.
  • Under Inventory, the hierarchical tree view of IP address manager and switch port mapper has been sorted based on group, switch names & subnet addresses.

Build No - 124028 - May 28, 2019

  • Option to schedule execution and emailing of reports has been included for Switch Port Mapper and IP Address Manager reports.
  • You can now schedule reports with password protection in PDF, XLS and CSV format. However, password protection for CSV file is only available when its in ZIP format.
  • The Trap Receiver tool, which is used to receive and view SNMP traps on a specified port in a manager station, has been brought back under SNMP tools.
  • Previously under the snapshot page, there were UI issues where quick links overlapped the contents in the page. This issue is fixed now.
  • General: Under Tools, The XSS vulnerability issue in getSNMPPing API has been fixed.
  • Previously in OpManager probe machine, bulk addition of devices to switch port mapper ('Add to SPM' option) was not working. This issue is fixed now.
  • Under the switch snapshot page, the port view section is enhanced such that 'IP address' information is added in the port tool tip.

Build No - 124024 - May 16, 2019

  • General : Previously, when HTTPS was enabled in the WebClient, some unexpected loading issues were observed. This has now been resolved by upgrading the Tomcat version used in the product.
  • General : Scroll issue while listing custom dashboards has been fixed now.
  • The 'local privilege escalation' vulnerability has now been fixed.

Build No - 124013 - April 23, 2019

  • Previously under Network Monitor tool, the Read community was being queried while adding or importing devices. It has now been replaced by an option in which users could select the credential from the credential list.
  • Path Traversal vulnerability in getSPMSettings API has been fixed.
  • Previously on adding or scanning DHCP server, the scan failed due to missing AD domain username and password. Now those details are obtained from the user while adding.
  • Previously under IP usage summary report, the used IP addresses were not displayed when "All" category was chosen. The issue is fixed now.
  • Previously, the MIB browser tool did not display the assigned credential names having whitespaces for selected IP addresses. This issue is fixed now.
  • Under Scheduler of SPM, the switches in 'selected switches column' present in edit task option were not sorted. The issue is fixed now.

Build No: 80000 to 124000

Build No - 124000 - April 09, 2019

  • JRE has been migrated to 1.8 and various vulnerabilities from JRE 1.7 have been eliminated. Highlights of JRE 1.8 migration:
    • General: Cipher algorithms AES-192 and AES-256 are supported in addition to AES-128 algorithm.
    • General: TLSv1.2 protocol is now supported by default.

Build No - 123321 - March 13, 2019

  • Previously, when we run Switch discovery, routers were also added in Switch Port Mapper along with the switches. Now routers are not added under Switch Port Mapper.
  • Under Rogue detection tool, an option to choose only the necessary columns has been added.
  • The ARP data collection from CISCO Switches and Router devices, which is used for better IP-MAC mapping has been enhanced through SNMP.
  • Previously, the "Port View" page was not working properly on OpManager probe server. This issue is fixed now.
  • Previously, bulk editing of switches did not work in Switch Port Mapper (SPM). The issue is fixed now.

Build No - 123310 - February 22, 2019

  • Previously, DHCP Server scanning was not completed due to null values in clientinfo. This issue is now fixed.
  • Under Inventory, the category sub filter "NIC type" table has been updated to match the IEEE OUI list.
  • Notification messages for product assistance have been included to help users. They can be enabled or disabled under settings.

Build No - 123304 - February 08, 2019

  • General: Previously, validation of session failed when the URL contained two or more consecutive backslashes. This vulnerability has been fixed now.

Build No - 123292 - January 25, 2019

  • Hint messages that helps in knowing intricate details of the product has been shown in various pages now.
  • Global Search enabled for IPAM & SPM
  • Previously, Sorting of columns in Bandwidth Monitor was not working properly as expected. This has been fixed now.

Build No 123241 - 123275 - December 31, 2018

  • Under Inventory, Actions column with scan and delete option is made available which makes it easier to do these functions.
  • Under Inventory, approving of subnets can be done in a few clicks now by selecting the 'Approve' option found in discovered subnets.
  • Previously under Inventory, 'Approve Subnets' tab didn't display the subnet address and mask values of a selected subnet. The issue is fixed now.
  • Under Inventory, 'Added Time' column is added and many other irrelavant columns are removed from the discovered subnets of IPAM.
  • Under Inventory, an appropriate message is now displayed when bulk subnets are selected for approval.
  • Under Settings of Switch Port Mapper, dropdown options such as port number and interface name are given inorder to show port label text in switch snapshot page.
  • The Community Checker tool, which scans the range of IP Addresses to get their SNMP read and write community strings in the network, has been brought back under SNMP tools.
  • Under Mac-to-IP Mapping, The XSS vulnerability issue in addRouter API has been fixed.
  • Under IPAM Settings, The XSS vulnerability issue in addIPAMScheduler API has been fixed.
  • Unauthenticated access to 'DataMigrationServlet' has been fixed. (Refer: CVE-2018-19403)
  • For other language installation, iTextAsian.jar file has to be downloaded by the user. This download message has been enhanced and is displayed clearly in OpUtils's UI.
  • Under Bandwidth Monitor in Inventory, the page was redirected to 'Add switch' page when Edit option of ifName is clicked. This issue is fixed now.
  • Under Inventory, the "No records to view" message was not shown even when there is no data available. This issue is fixed now.
  • Under Bandwidth Monitor in Inventory, when 'List Tools' icon is clicked the page is redirected to device snapshot page after the tools list is shown. This issue is fixed now.
  • Added 'Tray' Icon for Windows installation to start, stop, and get status of OpUtils.
  • Action class has been removed as it causes vulnerabilities in the product.
  • The Horizontal menu in the UI is enhanced in such a way that an "Add Device" option is added to Inventory, IP address manager, switch port mapper, etc. when the mouse hovers over it.
  • Under Settings, the "Maintain scan result of last 7 days" option of publish function didn't work properly. The issue is fixed now.
  • Under Switch Snapshot page, the custom column's validation doesn't work when updating the boolean and integer data type. The issue is fixed now.
  • General : During API calls, there was an 'APIKey' exposure vulnerability. This issue has been fixed now.
  • General : Pre-populated Database has been bundled with the Windows 64Bit build.

Build No - 123240 - December 24, 2018

  • General : The SQL injection vulnerability in 'getDeviceCompleteDetails' and 'getAssociatedCredentials' API's have been fixed.

Build No - 123239 - December 20, 2018

  • General : There was an SQL injection vulnerability in the Alarms section. This issue has been fixed.
  • General : In Alarms, there was an XSS vulnerability in the Notes column. This issue has been fixed.

Build No - 123237 - December 06, 2018

  • General : XSS vulnerability issue in domain controller has been fixed.

Build No - 123231 - November 29, 2018

  • General : Apache's 'commons-beanutils' jar has been updated to version 1.9.3 due to 'Remote Code Execution' vulnerability in an older version. (Refer: CVE-2018-19403)
  • General : Unauthenticated access to 'DataMigrationServlet' has been fixed. (Refer: CVE-2018-19403)
  • General : The 'Browser Cookie theft' vulnerability has been fixed.

Build No - 123229 - November 15, 2018

  • General : Under Tools, The XSS vulnerability issue in getPing API has been fixed.
  • General : Under Tools, The XSS vulnerability issue in getTraceRoute API has been fixed.
  • General : Under Tools, The XSS vulnerability issue in saveSystemDetails API has been fixed.
  • Under Config File Manager, the history of an IP was not properly displayed and it showed 'Undefined'. This issue is fixed now.
  • Under Config File Manager, the upload config option did not enlist the device name that is selected. This issue is fixed now.

Build No - 123223 - November 13, 2018

  • General : In the Inventory Snapshot page, the pie chart had a legend status color mismatch. This issue has been fixed.
  • General : The XSS vulnerability issue in updateWidget API has now been fixed.

Build No - 123222 - November 2, 2018

  • General : SQL injection vulnerability in Mail Server settings has been fixed.

Build No - 123221 - October 31, 2018

  • Under Inventory, details were not properly displayed under sub filters, in the left side of the page. This issue is fixed now.
  • Under IP Address Manager in Inventory, the IP ->DNS column data was not displayed. This issue is fixed now.

Build No - 123217 - October 17, 2018

  • General: The product web-client now supports Russian and Chinese(Taiwan) languages.

Build No - 123215 - October 12, 2018

  • A 'Getting Started' page has been added to guide the users with a step-by-step procedure for using OpUtils.
  • Added an option to switch menu bar from vertical alignment to horizontal alignment and vice versa.
  • Under Reports option, the 'Connected IP Details' report which provides details about the ports connected to the corresponding switches, and IP addresses has been added.
  • IPAM now supports IPv6.
  • Under settings, the 'Add Device' in MAC-to-IP mapping is enhanced such that it supports import option for SNMPv3 now.
  • Under settings, the 'Add Device' in MAC-to-IP mapping is enhanced such that it supports CLI settings(available only for switches and routers) now.
  • Under Inventory, the snapshot page of SPM, IPAM, Config management and Bandwidth Monitor is enhanced such that it provides quick links like 'How-to', 'faq's', etc now.
  • Previously, the MIB browser tool didn't respond to the SNMP version 2 credentials. The issue is fixed now.
  • Previously, there were issues in restoring backed up database if the custom columns are created. The issue is fixed now.

Build No - 123196 - September 07, 2018

  • General: The 'oputilsServlet' which was previously unauthenticated has now been removed (Reported by jacky.xing@dbappsecurity.com.cn and refer : CVE-2018-17283).
  • Previously, there was an issue in sending alert mails from IP address manager. The issue has been fixed now.

Build No - 123194 - September 03, 2018

  • OpUtils now extends customization options to the login page. You can now choose to show/hide the copyrights and also change the background to an image of your choice.

Build No - 123182 - August 02, 2018

  • The Config File Manager tool, which helps to download/upload the StartUp and/or the Running config files of Cisco devices and also helps to compare different versions, has been brought back under inventory.
  • The Config File Manager tool is enhanced with the capability of scheduling to take a backup of the config files from the Cisco devices at the specified interval.
  • Audit Information for Add/Edit/Delete User Operations for IPAM,SPM & Rogue has been included.

Build No - 123179 - July 26, 2018

  • Previously, the upgradation to build 123158 and above caused network interruptions in Windows 7 & 2008 R2. The issue is fixed now.

Build No - 123169 - July 11, 2018

  • Cross site scripting(XSS) and arbitrary file read vulnerability in Fail Over has been fixed. [CVE-2018-12997, CVE-2018-12998].

Build No - 123167 - July 05, 2018

  • ZipSlip Vulnerability issue has been fixed.

Build No - 123158 - June 14, 2018

  • Under Inventory, the UI of MAC, IP address and DNS is improved in the ports section by making multiple addresses now visible in a separate slide window when "more.." is clicked.
  • In the Switch snapshot page under Inventory, the UI of MAC, IP address and DNS is improved in the ports section by making mulitple addresses now visible in a separate slide window when "more..." is clicked.
  • Under privacy settings,  Personally Identifiable Information(PII) search and update has been implemented. (PII Search helps identify the PII Details given by the user across various modules. The PII data can also be updated as anonymous to maintain privacy).

Build No - 123156 - June 13, 2018

  • License Agreement has been updated.
  • Promotions related to ITOM Events will be displayed in the UI header after login.

Build No - 123151 - July 25, 2018

  • Path Traversal vulnerability in uploadMib API has been fixed (Reported by Pulse Security).

Build No - 123149 - June 06, 2018

  • Previously under Dashboard, the edit option in "IP Availability Summary HeatMap" widget only had a drop down list of IP's without their subnet mask. The issue is fixed now by listing IP addresses with their subnet masks.
  • Previously under Inventory, the edit option in IP address field does not mention the IP address that is being edited. The issue is fixed now by making the selected IP visible as a header.
  • Previously under Inventory the DHCP option shows an empty page when there is no data. The issue is fixed now as it shows sample data which disappears automatically once data is added.
  • Under Ports page of Inventory, five options such as "Modify IfAlias" , " Administratively Disable Interfaces" , "Administratively Enable Interfaces" , "Exclude Port(s)" , and "Include Port(s)" were made available. These actions were not available for the ports listed in switch snapshot page. The issue is fixed now. 
  • Previously under Inventory, the grid is not updated automatically after editing the IP address. The issue is fixed now.
  • Under tools, there was an issue in the working of Trace Route when resolving the DNS name. This issue is fixed now.

Build No - 123136 - May 22, 2018

  • The Bandwidth monitoring tool, which measures the network traffic utilization/bandwidth usage both at the interface level and at the device level, has been brought back under inventory. 
  • The Bandwidth monitoring tool is enhanced with the capability of generating alerts based on the configured threshold violation and the same can be notified through email.
  • Previously under OpUtils option, the SPM General settings could not be saved. This issue is fixed now.
  • Previously under Inventory, the option to edit a switch in Switch Port Mapper was not working. This issue is fixed now.
  • In Network Scanner page under settings, when deleting multiple IP Address(es) after selecting them, an error was thrown saying "Nothing is selected to delete". This issue has been fixed and multiple IP address(es) can be batch deleted.
  • Under 'Short Summary' page in Inventory, 'Subnet Summary','IP Summary','Switch Summary' title was displayed. This has been removed.
  • The 'Device Tye Summary' widget in Dashboard has been renamed to 'OS Type Summary' as it represents the OS type installed in the device.
  • Constraints have been added to check if the 'Custom column' name is numeric. An error message will be displayed stating "invalid Custom Name" in case the name is numeric.
  • In the MAC Address Resolver page under settings tools tab, 'IP to MAC' and 'MAC to IP' were displayed in two different lines due to a minor UI alignment issue. This has now been fixed.
  • In the Credentials page under SPM in settings, editing an existing credential redirected the page to Discovery's Edit Credential page. This issue has been fixed.
  • Under Basic settings, Database Maintenance option has been removed for OpUtils installation.
  • In the Scope page for DHCP under Inventory, the 'Scope State' column in the table contains two values - 'Enabled' and 'Disabled'. The 'Disabled' option will now be highlighted in red color.
  • In the 'OS Type Summary' widget (Previously called 'Device Type Summary'), the "%" symbol was not displayed in the value when hovering the mouse over it. This issue has beem fixed.
  • The SNMP graph tool, which is used to gather real time data and generates a graph for any SNMP IP node, has been brought back under SNMP tools of OpUtils settings.
  • The SNMP graph toolis enhanced with the capability of providing the MIB node information like OID, syntax, description and MIB node properties.

Build No - 123129 - June 22, 2018

  • Path Traversal vulnerability in uploadMib API has been fixed. 
  • The RemodeCodeExecution(RCE) vulnerability occurring while testing scripts has been fixed.
  • The SQL injection vulnerability in "FailOverHelperServlet" for the operation 'standbyprobestatus' has been fixed.
  • The SQL injection vulnerability in "FailOverHelperServlet" for the operation 'getprobenetworkshare' has been fixed.
  • In Group Chat Module, "Operator" user was not restricted from viewing the list of users, their User ID and Email addresses. This issue has been fixed.
  • Previously, "Operator" user was not restricted from viewing the URL monitors in the Inventory Page. This issue has been fixed.
  • Previously, "Operator" user was not restricted from being able to modify the background color and the tile color in the 3D floor view page. This issue has been fixed.

Build No - 123119 - April 18, 2018

  • Under SNMP tools from settings, a tool called MIB node viewer that is used to provide the complete details of the selected MIB has been added.
  • Under SNMP tools from settings, a tool called MIB module viewer which is used to provide a snapshot of a given MIB has been added.
  • Under Switch Port Mapper(SPM), the tree view has been added.
  • The IP snapshot page has been improved by adding missing data and actions.
  • The MAC-IP list, which was a missing tool, has been added.
  • Under the Subnet snapshot page, the options to edit and scan has been added.
  • Under the Subnet snapshot page, the option to delete alerts has been added.

Build No - 123109 - April 05, 2018

  • Under Reports option, the missing reports of the DHCP has been added.
  • Previously under Inventory, the option to edit a group of switches in SPM was not available. The issue is fixed now.
  • Previously under OpUtils settings, the port history was in General tab. This is moved to cleanup policy tab now.
  • Under Inventory, the category sub filter in port field has added an "administrative disabled/enabled" option.
  • Previously under Inventory, the 'Add to SPM' option didn't display a proper Success/Error message in UI. The issue is now fixed.
  • Under Inventory, the category sub filter "NIC type" table has been updated to match the IEEE oui list.

Build No - 123093 - March 26, 2018

  • 100% CPU Utilization issue due to AppSMS in OpManager has been fixed.

Build No - 123091 - March 20, 2018

  • The DHCP Scope Monitor of the SNMP tool is enhanced in a way that helps to monitor the DHCP scopes of a given IP address or DHCP server name and scans intermittently based on the scheduler profile created by the user. It also provides an email alert to the user when an IP address in the DHCP scope falls below a specified count.
  • The Network Monitor tool is updated to monitor the response time and packet loss of selected devices, creates a history of details that can be viewed by the user.
  • The System Details Update of Network monitoring tool has been enhanced in such a way that it is made possible to edit system details of specific devices like sys name, sys location , sys contact and update these details from the remote device itself. The updated status can also be viewed from the remote device.

Build No - 123083 - March 12, 2018

  • Dashboard loading has been revamped and optimized for better performance.
  • In the Login page, iPhone/Android and iPad application download links have been included.
  • License expiry information in header had a few alignment issues. This has now been fixed.
  • User Icon with product details and about information has been moved to right top corner.
  • In the Inventory page, product based tabs have been moved horizontally.
  • Sign out option has been moved from Quick links to User details menu.
  • Support icon has been added for (Mail, Apply license, phone number, SIF, User guide, Videos, Service pack, ThreadDump, DB Query & view Logs) links.
  • In support page, the Query page under DB Query will be opened in a new window without ember.

Build No - 123082 - March 8, 2018

  • Previously under Inventory, the port option does not show any differentiation for connected devices. This issue is fixed now as the connected devices are differentiated based on colours such as orange for virtual IP, grey for multi MAC port and yellow for stacked port.
  • Previously, only OpManager API has called for adding switches and hence there was an issue in adding switches in SPM. The issue is fixed now.
  • Previously while adding devices, the device explorer option under Cisco tools didn't display a proper error message like 'Not a CISCO device' . The issue is fixed now.
  • Previously, the Proxy ping option under tools didn't show any proper images for scan results. The issue is fixed now.
  • Previously under Oputils option, the field 'Clean up policy location' was not mentioned in Publish directory of IPAM and SPM. The issue is now fixed.
  • Previously under sort summary, when clicking on snapshot page, API was called twice. This issue is fixed now.
  • Under reports, a field called 'Custom Period' has added in 'Port by Operation Status Last Change Time' report.
  • 4249914, 4010627 - Under Inventory, the option to add switches by importing a CSV file was included.

Build No - 123070 - February 21, 2018

  • General : SQL injection vulnerabilities in Servlet's API has been fixed.
  • The SNMP ping tool under Settings-> Tools now has the option to choose devices and credentials that are already added in the product. You can also manually enter the device name or IP address by clicking on the (+) icon.
  • The MiB Browser tool under Settings -> Tools now has the option to choose devices and credentials that are already added in the product. You can also manually enter the device name or IP address by clicking on the (+) icon.

Build No - 123057 - February 01, 2018

The following vulnerability issues have been fixed in OpUtils:

  • DDI-VRT-2018-02 – Unauthenticated Blind SQL Injection via /servlets/RegisterAgent
  • DDI-VRT-2018-03 – Unauthenticated Blind SQL Injection via /servlets/StatusUpdateServlet and /servlets/AgentActionServlet
  • DDI-VRT-2018-04 – Multiple Unauthenticated Blind SQL Injections via /embedWidget
  • DDI-VRT-2018-05 – Unauthenticated XML External Entity Injection via /SNMPDiscoveryURL
  • DDI-VRT-2018-06 – Unauthenticated Blind SQL Injection via /unauthenticatedservlets/ELARequestHandler and /unauthenticatedservlets/NPMRequestHandler
  • DDI-VRT-2018-07 – User Enumeration via /servlets/ConfServlet.

Build No - 123052 - January 17, 2018

  • The possibility to fetch user details through ConfServlet has been fixed and is secured now.

Build No - 123049 - January 8, 2018

  • Filters have been added in the device snapshot pages of Ports and IP Address.
  • 4249914 - Under reports, the "Export" option is now more visible on the top of the page.
  • Previously in the rogue dashboard, 1000 recently discovered devices were displayed. Because of this, the page loading time had increased. This issue is fixed by reducing the number of recently discovered devices from 1000 to 100.
  • Under Inventory, wrong tab details were displayed under sub filters, in the left side of the page. This is now fixed.
  • 3740821 - Under port snapshot page, the field "Physical Location" can now be edited.
  • 4120052 - Previously, DHCP Scopes scanning was not completed due to null values in clientinfo. This issue is now fixed.
  • Previously, when license count was 3, users were able to add 4 users (Including admin), but then OpUtils displayed the license activation page in the next login session. This issue is now fixed to add only 3 users including admin.
  • After deleting DHCP, the page was not refreshed. This issue is now fixed.
  • Under IP address tab in the inventory, the asset tag data was missing previously. This is now fixed.

Build No - 123032 - December 6, 2017

  • Included actions like add, delete, rename group in IPAM tree under Inventory.
  • Option to add/edit subnet location, VLAN name has been provided while modifying a subnet.
  • A "Check Now" button is included while adding a switch in the SPM page to verify its presence.
  • Under "Switch Ports by ifType" Reports, the IF TYPE was missing for few switch ports previously. This is now fixed
  • "M" character had been appending in the total device count in the SPM email alert. This is now fixed
  • Previously, WMI query tool was not working due to the presence of "\" in the Name field. This issue is now fixed.
  • Under Settings, Active Directory scanning was not working previously, if the password contained special characters. This issue is now fixed.
  • Under Add Subnet option, the Redirect link leading to sample csv format was not working. The redirect link is now replaced with a sample csv file.
  • In the Mac address resolver under Settings, the error message occurring when SNMP community field was not filled, is now deleted.
  • AD Status Summary in Dashboard & IP Addresses was not updated after completing the subnet scan. This issue is now fixed.

Build No: 123005 - October 6, 2017

  • Under the inventory tab for IP address management, a read-only tree view has been added for easy classification of subnets.
  • Under then inventory tab for IP address management, when IP addresses are filtered by the OS category '"Unknown", the list was not loaded. This issue has been fixed.
  • Under IP address management, the page loading time for showing the inventory of IP Address, Ports, and Rogue has been improved.
  • The changes done in General settings under OpUtils->SPM were not saved in the database. This issue has been fixed.
  • When a device that doesn't support the Bridge-MIB was added for IP address and switch port management, no error message was displayed. Now, if such devices are added, an error message will be shown in the UI.

Build No: 123004 - October 3, 2017

  • CCTV crash occurring while resizing the widgets has been fixed.
  • Option to Add/Remove widgets included in default dashboards.
  • The customization done in a dashboard & CCTV with respect to widgets position and size will be retained across users and browsers.

Build No: 123003 - September 28, 2017

  • For other language installation, iTextAsian.jar file has to be downloaded by the user. This download message has been enhanced and is displayed clearly in UI.
  • Issue with the WebAlarms widget where no data was available previously due to DB error, is now fixed.

Build No: 123002 - September 20, 2017

  • Router display name was not updated while fetching from Router via SNMP has been fixed.

Build No: 123001 - September 7, 2017

  • Google map widget was not loading properly in CCTV and this has been fixed.
  • Browser crash issue when CCTV name has a space has been fixed.
  • Issue in adding SNMP v1 and v2 credentials in OpUtils has been fixed.

Build No: 12300

  • Issue with add switch has been fixed.
  • Issue with modify switch has been fixed.
  • Issue with IPAM Publish, Scheduler is fixed.
  • Issue with viewing configuration change diff with HTML content is fixed.
  • Issue with sorting in inventory and search issue is fixed.
  • Issue in Tools, TCP reset has been fixed.
  • Multiple UI issues have been addressed.

Build No: 12200

  • New UI enhancements and bug fixes.

Build No: 120000

  • OpUtils gets a new GUI with better user experience.

Build No: 80000

  • New API-based GUI has been introduced for OpUtils.

Build No: 70000 to 80000

Build No: 71025

  • Issue in high CPU utilization while scanning a Cisco switch has been fixed.

Build No: 71023

  • DB Migration issue(could not create a column in destination db if column name with space)
  • Bug fixed in fetching Vlan details of Extreme switch
  • Allow few special chars while validating email address

Build No: 71022

  • Ability to view the currently logged on users on a computer has been included in IP Address Manager tool
  • Ability to discover switches from the subnets added in the IP Address Manager tool has been added
  • Removed some old gif images and added new png images

Build No: 71021

  • Settings Page UI has been changed in Rogue detection , NWMonitor and BWMonitor
  • Fixed Status msg display issue in NWMonitor
  • Vulnerability Issue in TFTP Server has been fixed
  • Vulnerability Issue OpUtils API has been fixed

Build No: 71020

  • Ability to migrate to a different supported database has been added
  • Quilk links(KB/FAQ) has added for IPV6,DHCP and missed tools - Internal

Build No: 71019

  • Ping, SNMP, DNS and MAC Address Scan tools have been combined and made as "Network Scanner" tool
  • Drop Down UI style changed

Build No: 71017

  • IPAM Plugin .bin installation issue on Linux Open suse machine has fixed

Build No: 71015

  • When exporting the Port Details of a switch from Switch Port mapper, issue in adding HTML tags within the files has been fixed
  • Issue in SPM Settings page has been fixed

Build No: 71013

  • Issue in displaying data in IPAM home page has been fixed

Build No: 71012

  • UI Look and Feel has been improved
  • Spanish and Dutch language has been supported
  • Issue in high CPU utilization while scanning a Cisco switch has been fixed
  • Issue in switch scan getting failed in some specific cases has been fixed

Build No: 71000

  • OpUtils IPAM now supports IPv6
  • Issue in displaying the Excluded ports when the "All Included Ports" filter is selected in the Switch details view has been fixed
  • Issue in not showing "Approve Subnet" in the proper place has been fixed now

Build No: 70026

  • Issue in starting OpUtils when used as a plug-in to OpManager in some specific cases has been fixed
  • Japanese and German language has been supported

Build No: 70024

  • Switch Port Mapper now list the switches in your network in hierarchical tree view, which can be logically grouped

Build No: 70023

  • You can now monitor a Windows DHCP Server that runs on a different domain that of the computer where OpUtils is installed
  • Issue in creating scheduled tasks for scanning subnets or switches has been fixed

Build No: 70022

  • Windows DHCP Server monitoring has been included in IP Address Manager tool.

Build No: 70021

  • Issue in displaying the Used Ports and Available Ports reports have been fixed

Build No: 70020

  • Issue in validating port number in port scanner has been fixed
  • Issue in displaying alerts in Alerts page has been fixed

Build No: 70019

  • OpUtils XSS vulnerability issues has been addressed and fixed

Build No: 70017

  • API help document has been updated.

Build No: 70016

  • Context Name field is made optional for SNMP V3 Settings (Router)
  • Issue in showing count of a Custom Query Report has been fixed
  • Issue in listing the scheduled reports has been fixed.

Build No: 70015

  • Importing device details from CSV file in Switch Port Mapper & Config File Manager now supports SNMP v3 input details.

Build No: 70014

  • While exporting the data from a Custom Query Report that has more than 100 rows of data, only the 100 rows that were currently displayed was exported. This has been fixed to export all the data.
  • Issue in displaying incorrect schedule in the tool tip of the SPM and IPAM Scheduled reports has been fixed.
  • Issue in listing the scheduled reports has been fixed.
  • While scheduling a report to run Only Once, you will now have an option to choose the date in addition to the time.
  • Issue in searching the switch details when you search using a DNS name of the switch has been fixed.
  • Context Name field is made optional for SNMP V3 Settings
  • API Enhanced for IPAM (with json response included)

Build No: 70013

  • Issue in scheduled scanning the routers has been fixed
  • Intelligence to retrieve the VLAN details of Extreme Switches has been enhanced to include EXTREME-VLAN-MIB

Build No: 60000 to 70000

Enhancements & Bug Fixes between Build 61026 & 70000

Enhancements

  1. Support for MS SQL database included
  2. Support for Postgres (pgSQL) database included

Enhancements & Bug Fixes between Build 61000 & 61026

Enhancements

  1. Support for Chinese Language has been introduced.
  2. Identifying the device type using SNMP has been enhanced by including the details of the new device types.
  3. While you auto-publish the IPAM and Switch Port Mapping results, you will also be able to choose the columns to be published.

Bug Fixes

  1. Issue in searching switch details in Switch Port Mapper has been fixed.
  2. Issue in importing trusted devices from a CSV with just the MAC Address has been fixed.
  3. Issue in showing a wrong Port speed in Switch Port Mapper has been fixed.
  4. Issue in adding active directory users in User Management has been fixed.
  5. Issue in reverting Network monitor 'Alias Name' has been fixed.
  6. Issue in SPM Page width been resolved.
  7. Issue in scanning subnets has been fixed.
  8. Issue in wrongly displaying insufficient privileges while adding an active directory from a Non English server has been fixed.
  9. Issue in viewing the IP history of the subnets by name has been fixed.
  10. Issue in saving the switch data in Switch Port Mapper tool has been fixed.
  11. Issue in showing a license exceeded message when the license limit is not reached has been fixed.
  12. Issue in firebird log file growing beyond the desired size has been fixed.
  13. Issue in exporting the visible columns from Switch Port Mapper view has been fixed.
  14. Issue in showing a wrong count of Rogue Devices when you move devices from Guest to Rogue or Trusted status has been fixed.
  15. Custom query scheduler report limit increased from 100 to 1000 due to long time taken for complete a report.
  16. Issue in importing routers from a CSV file has been fixed

Enhancements & Bug Fixes between Build 60000 & 61000

IP Address Manager

  1. To avoid false alerts, MAC Addresses will be validated prior to raising an alert on ARP Spoofing
  2. Navigation issues in IP Address Manager list view has been fixed
  3. You will now be able to view subnets by name or subnet address in IP Address Manager tree view.
  4. Subnets in IP Address Manager tree view will appear sorted by its name or subnet address.
  5. You will now be able to move multiple subnets between groups by drag-n-drop using Ctrl or Shift keys to select the subnets.
  6. Horizontal scroll bars are eliminated with the introduction of auto-scroll on moving the mouse to the right or left of the table in IP Address Manager
  7. Issue in showing duplicate IP Addresses in the IP Address Manager tool has been fixed.
  8. IPAM reports published on a drive other than where OpUtils is installed can also be accessed from the client console.
  9. Terminology Mistake "Do you want to discovered Subnet?" and "AD Scan Inprogress" issue has been fixed.
  10. Alerts from IP Address Manager will be logged on to your Syslog Server automatically
  11. Issue in showing duplicate entries in IP Address Manager views has been fixed.
  12. Displaying SNMP community data has been restricted while publishing IPAM data.
  13. Spelling of “location” in ‘Modify Location’ has been fixed.
  14. Detecting the device type based on its MAC Address has been enhanced to include the most recent additions to OUI Public Listing.
  15. Issue in showing a wrong Subnet Mask in discovered subnets has been fixed.
  16. Issue in stopping the scanning even after deleting a subnet has been fixed.
  17. Issue in generating alerts when the subnet has more than 1024 IPs has been fixed.
  18. Issue in modifying the subnet name has been fixed.
  19. Issue in publishing the IPAM and SPM results on a different computer other than where OpUtils is installed has been fixed.
  20. Issue in 'IPAM Auditing' while multiple users are logged in has been fixed.
  21. Issue in resetting 'Owner name' under IP details has been fixed.
  22. Issue with drag & drop options, in IPAM tree has been fixed. Creating, deleting and scanning subnets are made easy by right clicking on the IPAM tree
  23. Issue in scanning subnets not approved is fixed.
  24. Issue in displaying non admin users in IPAM audit is fixed.
  25. Alert notifications added in IPAM to identify ARP Spoofing.
  26. Issue in exporting the subnet details in IP Address Manager has been fixed
  27. IPAM performance has been enhanced with query optimization.
  28. Issue in resolving the MAC Addresses from ICMP ping has been fixed.
  29. Issue in showing wrong Device Type for Windows 7 & MAC computers in IPAM has been fixed.
  30. Delay in showing the Add Subnet dialog has been fixed.
  31. Issue in deleting Class A subnets from IP Address Manager tool has been fixed.
  32. When you manually move an IP Address to Available state, you can choose to retain the MAC address of the device to which the IP was previously allocated.
  33. OpUtils API released for IPAM module to get Subnet and IP details to be fetched using API calls. Developers can use the XML response.
  34. Issue in performing scheduled scans in IP Address Manager when the OpUtils server was shutdown prior to completion of scanning of subnets for the first time has been fixed. In most cases, this problem is experienced when you export subnets to the IP Address Manager tool and shutdown OpUtils before the scanning could complete.
  35. Issue in adding subnets to the scanning queue has been fixed in the IP Address Manager tool.
  36. Issue in IP Address state getting moved to 'Available' from 'Transient' when you upgrade from an older version has been fixed.
  37. Issue in Scheduler Scan in IPAM has been fixed.
  38. Issue in saving the publish settings in IP Address Manager has been fixed

Switch Port Mapper

  1. Issue in listing the port details when clicked on Available/Used/Transient port count in Switch Port Mapper has been fixed
  2. MAC Addresses that do not show a corresponding IP Addresses in Switch Port Mapper will now link to a KB article for possible reasons
  3. 'MAC-IP data' is now enhanced, to fetch data from ipNetToMediaTable & ipNetToPhysicalTable.
  4. Issue in defaulting SNMP version to v1 while modifying a switch in Switch Port Mapper has been fixed.
  5. Horizontal scroll bars are eliminated with the introduction of auto-scroll on moving the mouse to the right or left of the table in Switch Port Mapper
  6. Issue in SPM alerting, while no change in the connected devices has been fixed.
  7. SPM reports published on a drive other than where OpUtils is installed can also be accessed from the client console.
  8. Switch and Port details of an IP will be shown even if the state of an IP is down.
  9. Issue in search box moving out of view has been fixed.
  10. Alerts from SPM will be logged on to your Syslog Server automatically
  11. DNS name of the switch has been added to the Switch summary view of Switch Port Mapper tool
  12. Issue in generating a false alert when there is no new device has been detected has been fixed in the Switch Port Mapper tool
  13. Displaying Future Date, as 'last changed date' for some interfaces, issue has been fixed.
  14. VLAN details are supported for Extreme XOS.
  15. While searching specific IP in SPM tool's global search, issue in not showing Virtual IP has been fixed.
  16. “IfAlias” column has been included in email alerts.
  17. Issue in displaying failure message while updating “IfAlias Name” has been fixed.
  18. Entering “switch name” to block/unblock devices, has been enhanced with auto suggest feature.
  19. When adding switches to the group, you will now have an option to sort the available switches
  20. Ability to update SNMP Community string for Switches in bulk has been added.
  21. Issue in updating the Select Group list when a group is modified or deleted in Switch Port Mapper has been fixed.
  22. Issue in searching devices based on the VLAN is has been fixed.
  23. Issue in exporting Switch Port mapping results without the stacked/trunk ports has been fixed.
  24. Issue in scanning a switch after modifying using the 'Modify & Scan' button has been fixed.
  25. 100% CPU usage in SPM, performance issue has been fixed.
  26. Searching MAC address in SPM is made quicker.
  27. Issue in collecting MAC address of Alcatel Switches is fixed.
  28. Issue in showing the same MAC Address in different switches has been fixed
  29. Devices moved from a different switch and port will be identified separately in Switch Port Mapper.
  30. Exporting data from Switch Port Mapper will only export the columns to you have chosen to view.
  31. Issue with "Exact" search in Switch Port Mapper tool has been fixed.
  32. Issue in showing the same MAC Address in different switches has been fixed
  33. Issue in drilling-down to the data from the summary view in Switch Port Mapper has been fixed
  34. Issue in deleting the IP address of a switch from the IPAM tool when the switch is deleted from Switch Port Mapper has been fixed
  35. Issue in resolving IP for a MAC in Switch Port Mapper has been fixed
  36. Issue in updating the DNS name while scanning the switch has been fixed.
  37. Issue in showing VLAN name for computers with multiple MAC Addresses has been fixed.
  38. Switch summary view will now include the IP Address of the switch.
  39. Auto-detection of VLAN has been included for 3com switches in the Switch Port Mapper tool.
  40. Issue in changing the state of Available ports to Transient when the switch is restarted has been fixed.
  41. Issue in showing the "Excluded Ports" in Switch Port Mapper reports and views has been fixed.
  42. Issue in exporting a scheduled Switch Port Mapper report to a csv file has been fixed.
  43. Issue in publishing Switch Port Mapping results by group when OpUtils is installed in Windows OS has been fixed.
  44. Performing an SNMP Sweep prior to scanning a switch has been changed to Ping Sweep for better results
  45. Issue in displaying wrong ifAlias Name in some specific cases in the Switch Port mapping results has been fixed.
  46. The MAC address of the previously connected device on a switch port is retained till a new device gets discovered. This is now made configurable whether to remember or not.

Rogue Detection

  1. Rogue Detection tool is enhanced with Audit tab.
  2. Issue in sending emails to multiple users while using comma separated values in 'Rogue Detection' has been fixed.
  3. Comments column added for rogue detection
  4. UI done for Audit backup settings for Rogue
  5. Ability to import MAC Addresses from a csv file introduced in Rogue Detection tool under Trusted tab. All MAC Addresses imported will be automatically moved to 'Trusted' status.
  6. Settings Page added in Rogue Detection tool.
  7. Message Board introduced in Rogue Detection tool to display help instructions.
  8. Under "Rogue Detection" view, alert messages are enhanced with the link to list the reported devices.
  9. Rouge Detection tool has been enhanced with an additional filters to list devices. Devices discovered in the last 24 hours, 48 hours, 72 hours, devices whose guest validity has been expired, devices whose guest validity will expire in the next 24 hours, 48 hours and 72 hours can be listed using this filter.
  10. Alerts from Rogue Detection will be logged on to your Syslog Server automatically
  11. Issue in showing a wrong value in VLAN ID column of Rogue Detection tool has been fixed
  12. Alert notifications added in Rogue Detection to identify ARP Spoofing. 

Config File Manager

  1. Issue in bulk upload of config files to devices has been fixed in Config File Manager tool
  2. Page navigation issue has been fixed in Config File Manager tool.
  3. Config File Manager has been enhanced to allow hourly backups.
  4. Issue in exporting the data from Config File Manager has been fixed.
  5. Issue in uploading a config file to the Cisco device has been fixed.
  6. Issue in uploading the config file to the device in the Config File Manager tool has been fixed. 

Network Monitor

  1. Issue in sorting "IP Address" columns in Network Monitor tool under 'Host' and 'Alert' tabs have been fixed.
  2. Ability to pause and resume monitoring of a device has been included in Network Monitor tool
  3. Monitoring Interval in Network Monitor tool can now be as low as 20 seconds
  4. Issue in sorting the devices based on the Response Time in Network Monitor tool has been fixed
  5. Network monitor 'Alias Name' reverting issue has been fixed.
  6. In Network Monitoring, 'Round Trip Time' is made configurable.
  7. Performance of Network Monitor tool and Router Scans have been greatly enhanced.
  8. Issue in updating the status of a device in the Network Monitor tool has been fixed.
  9. Issue in trimming the unwanted space from the IP Address field while importing the data from a CSV file in the Network Monitor tool has been fixed.
  10. Issue in generating unwanted alerts in the Network Monitor tool has been fixed.
  11. Network Monitor tool has been enhanced with the ability to sort hosts by Alias Name, import or export the host details including the Alias Name and to include the Alias Name within the email alert notifications.

Bandwidth Monitor

  1. Problem in deleting/adding interfaces in Bandwidth Monitor tool has been fixed.
  2. Issue in showing the out-traffic graph in Bandwidth Monitor tool has been fixed.
  3. Issue in sending multiple alerts for the same problem in Bandwidth Monitor has been fixed.

Wake On LAN

  1. Issue in adding devices to ‘Wake On LAN’ by selecting from list has been fixed. 

General

  1. Quick links has added
  2. Issue in displaying unwanted HTML tags in the Settings pages when accessed from IE browser has been fixed
  3. Deleting alerts in bulk from the Global Alerts view has been optimized.
  4. Showing empty page while try to click "session expiration" under admin>>Personlize has been fixed.
  5. Issue in router last scan update time has been fixed.
  6. Issue in creating a user with special characters in password has been fixed.
  7. Issue in Configuring ports in the Port Scanner tool has been fixed.
  8. Issue in adding a router when ICMP to the router is disabled has been fixed.
  9. Creation of user accounts has been enhanced to support even a single character as 'User Name'.
  10. Support for adding users to OpUtils with only numeric values has been included.
  11. Ability to update SNMP Community string for Routers in bulk has been added.
  12. Issue in closing message box, while new user creation has been fixed.
  13. Delay in showing the Add User dialog has been fixed.
  14. Router scans now support SNMP v3.
  15. You can now specify a maximum time to scan and identify the Cisco Devices in the network in Cisco Device Scan tool.

IPAM AND SPM Plugin For OpManager

  1. When OpManager is running in HTTPs mode, IPAM/SPM Plug-in will automatically use HTTPs. (including 3rd party ssl)
  2. Issue with the right-click options not being shown on the IPAM tree in the plug-in mode has been fixed.

Build No: 58000 & 60000

Enhancements & Bug Fixes between Build 58000 & 60000

IP Address Manager:

  1. Identifying the Device Type has been enhanced to include Zebra Net and D-Link Printers.
  2. Publishing the IPAM results has been enhanced to include option to publish in HTML format.
  3. Option to scan subnets by groups has been added.
  4. Issue in updating Sys Name during subnet scan has been fixed.
  5. Search enhanced to include searching using SysName of the device.
  6. The Switch details like the Connected Switch and connected Switch Port of the Virtual IP Addresses will now be shown.
  7. Option to import Device Type and Owner has been included.
  8. Importing IP Address Details from the Subnet Details view can now include MAC Address, System Name and System Description fields. When a new MAC Address gets imported this way, alert notification on new MAC discovery will not happen and the MAC gets moved to the Trusted category in the Rogue Detection Tool.
  9. Option to resolve DNS using nslookup command when OpUtils is installed on a Linux OS has been included.
  10. Issue in exporting the subnet details with the Reserved Status column has been fixed.
  11. Issue in resolving the DNS names of the IP Addresses has been fixed.
  12. Issue in scanning a subnet from the tree has been fixed.
  13. Issue in displaying the IP Availability Status (as Used, Available, or Transient) in the exported results has been fixed.
  14. Time to scan the subnets has been reduced.
  15. OpUtils now uses FireBird version 2.5 to store the data and configuration.

Switch Port Mapper:

  1. Port and IP history clean up policy has been included.
  2. Search in has been enhanced to include the match type as exact or contains and to include custom column values.
  3. Auto-detecting VLAN data of Nortel Passport ERS 8600 series switches has been included.
  4. Issue in exporting the mapping results has been fixed.
  5. Option to change the switch name has been included.
  6. Issue in sending Email Alerts has been fixed.
  7. Option to publish the Switch Port Mapping results in HTML format has been included.
  8. Issue in modifying the ifAlias name in bulk has been fixed.
  9. Switch Port Mapper will now include the history of devices connected to a switch port.
  10. Issue in switches getting deleted in some specific cases has been fixed.
  11. Email notifications have been enhanced.
  12. Issue in retrieving the VLAN ID of Extreme switches has been fixed.
  13. Option to view the Port by Operation Status Last Change Time report for a custom period has been included.
  14. Issue in switches getting deleted when its MAC address is deleted from the Rogue Detection tool has been fixed.
  15. Possible reasons for not detecting a switch port of a detected MAC have been included.
  16. More frequent hourly scan options have been included in Switch Scan Scheduler.
  17. Errors encountered during a switch scan will be shown in the Remarks column in the Switches View.
  18. Importing Switches to the Switch Port Mapper tool will now include the SNMP version.
  19. Issue in creating consolidated report has been fixed.

Rogue Detection:

  1. Issue in rediscovering a device when it has been deleted from Rogue Detection tool has been fixed.
  2. Issue in automatically marking a computer that is available in the Active Directory as Trusted has been fixed.

Bandwidth Monitor:

  1. Data collection issue in Bandwidth Monitor tool (arising out of database dead lock) has been fixed.
  2. Issue in showing multiple entries of the same interface has been fixed.

Config File Manager:

  1. Config File Manager now supports SNMP v3.
  2. Link to knowledge base has been included for errors encountered while retrieving the config files.
  3. Issue in value of "sysname" getting changed in routers/switches has been fixed.
  4. Issue in uploading the config file has been fixed.

General:

  1. OpUtils EXE has been digitally signed.
  2. Issue in running OpUtils on Windows 7 and Windows Vista OS has been fixed.
  3. Issue in displaying non-English characters in user input data has been fixed.
  4. Issue in executing a query when it contains a wildcard character has been fixed in the Query Report.
  5. Logging has been enhanced when a new IP is detected, deleted or updated.
  6. Issue in editing the custom column values from the global search results has been fixed.
  7. Script error on clicking the Add User link has been fixed.
  8. Issue in retaining the old password even after changing the password in the Active Directory has been fixed.
  9. User credentials of the domain that do not have admin privileges will be marked red for easy identification.
  10. Option to schedule execution and emailing of reports has been included for Switch Port Mapper and IP Address Manager reports.
  11. Details of the deleted IP Addresses with Custom Fields will be logged separately in DeletedIPs0.txt file.
  12. Issue in displaying duplicate MAC Addresses in Rogue Detection, IP Address Manager and IP Availability Report has been fixed.
  13. Usability enhanced by providing more informational messages.
  14. Read-only user role has been added.
  15. Hourly scan option has been introduced in Subnet Scan Scheduler of the IP Address Manager tool.
  16. Add Domain link has also been included under the Admin tab.
  17. Ability to authenticate OpUtils users via Active Directory has been included.
  18. Switch/subnet name in the Summary tab has been linked to the corresponding details view.
  19. Home page will now show the top 5 switches and subnets based on their usages instead of Rogue and Inventory charts.
  20. SNMP version can also be specified when adding a router.
  21. Alert Cleanup policy enhanced to specify the max. number of alerts per file and the number of files to maintain.
  22. Issue in running OpUtils in CentOS, which is caused by FireBird installation, has been fixed.
  23. Issue in selecting a computer from the list in the Wake on LAN tool has been fixed.
  24. Issues in OpUtils getting restarted while scanning subnets in IP Address Manager has been fixed.
  25. Global Alert count has been removed from the top of the home page to reduce the page loading time.

Build No: 57000 & 58000

Enhancements & Bug Fixes between Build 57000 & 58000

IP Address Manager

  1. Issue in occupying high disk space in storing the IP History Data has now been fixed.
  2. The IP Address Manager tool now includes additional columns like Last Successful Scan, Last Scan Status and Remarks for the Active Directory Domains that are added.
  3. Last and Next scan schedules of the Active Directory Domains will be shown at the top of the domain lists in the IP Address Manager tool.
  4. While approving the auto-discovered subnets in the IP Address Manager, administrators will now be able to assign a domain to a subnet.
  5. Options to add routers from IP Address Manager has been included.
  6. Option to initiate subnet discovery from routers has been included in IP Address Manager.
  7. IP Address Manager now supports scanning multiple Domains of the Windows Active Directory
  8. The IP Detail view will now show the domain to which the IP belong.
  9. Graphical representation of subnet usage has been included in IP Address Manager Tool.
  10. Subnets in the IP Address Manager will now be shown in CIDR Notation (e.g. 192.168.112.0/24).
  11. You can now specify the DNS Server that the IP Address Manager should use to resolve the DNS Names of the IPs.
  12. Issue in displaying the previous DNS name when the IP gets reallocated has been fixed.
  13. Issue in showing duplicate IP Addresses in IP Address Manager has been fixed.

Switch Port Mapper

  1. The Location column in the CSV export of the Switch Details view is renamed to Physical Location to match the UI column name.
  2. The procedure to retrieve the VLAN information of Extreme and Force10 switches has been modified.
  3. The default value for classifying a port as stacked port has been changed to 2 from 10.

General

  1. Database version changed from Firebird-1.5.1.4481  to Firebird-2.1.3.18185-0
  2. You will now be able to create a custom column to add/upload related files.
  3. Links to knowledge base articles have been added along with the error message.
  4. Useful Links has been introduced in the OpUtils Summary Page.
  5. Issue in exporting the data from the Network Monitor tool has been fixed.
  6. Issue in sending empty alerts from the Rogue Detection tool has been fixed.

Build No: 5600 & 57000  

Enhancements & Bug Fixes between Build 5600 & 57000

IP Address Manager

  1. IP Address Manager will now alert when the IP Utilization of a subnet falls below or exceeds the prescribed limit.
  2. Issue in showing duplicate IP Address in IP Address Manager has been fixed.
  3. Issue in not scanning all the IP Addresses of a subnet has been fixed.
  4. Issue in deleting all the subnets from the IP Address Manager tool has been fixed.
  5. Issue in maintaining the status of the IP Address in the IP Usage Summary report has been fixed in IP Address Manager tool.
  6. Issue in available IP addresses report has been fixed in IP Address Manager Tool.
  7. Performance of IP Address Manager has been increased by query optimization.
  8. Tool tip related issues has been fixed.
  9. Issue in displaying the colum chooser when number of IPs managed is high has been fixed.
  10. Issue in cleaning up the old alerts has been fixed.
  11. A new column, DNS name, is added for Report view.
  12. Now Search with DNS name will return the result even if corresponding IP value is empty.
  13. Issue in changing the reserved static ip has been fixed.
  14. Issue in navigating the summary graph navigation has been fixed.
  15. Issue in checking the licensed IP Address count when adding a subnet has been fixed.
  16. Performance issue has been fixed in home page.
  17. Issue in rendering the view when the subnet count is high has been fixed.
  18. Issue in exporting IP Address Manager reports to PDF format has been fixed.
  19. Issue in adding a subnet has been fixed.
  20. Issue in synchronizing the data with the Active Directory has been fixed.

Switch Port Mapper

  1. Switch Port Mapper allows you to create custom columns for storing user-defined values both at the summary and port detail level.
  2. Switch Port Mapper search has been enhanced to include VLAN Name in the search string.
  3. Option to Telnet a switch has been added to the Tools within Switch Port Mapper.
  4. The switch port status 7 has been specifically handled for 3com switches.
  5. Issue in searching a VLAN ID in text format has been fixed.
  6. Option to exclude specific switch ports from the switch has been included.
  7. Issue in showing the VLAN details of Nortel Switches has been fixed.
  8. Performance of Switch Port Mapper has been increased by query optimization.
  9. Issue in exporting reports to PDF in the Switch Port Mapper tool has been fixed.
  10. New report has been introduced based on port operation status change time.
  11. Issue in saving the Alert configuration has been fixed.
  12. Group name of the switch will now be displayed in the alphebetical order..
  13. Switch Port Mapper now includes the VLAN details of Nortel Switches.
  14. New alert introduced to notify high port utilization.
  15. Issue in scanning the switches when the VLAN ID is too big has been fixed.
  16. Error in calculating ifSpeed value has been fixed.
  17. Option to get the current state of the switch port has been included.

Rogue Detection

  1. Issue in showing duplicate entries in Rogue Detection tool has been fixed.
  2. Option to delete all the discovered devices in the Rogue Detection tool has been included.
  3. New columns have been added: ifIndex,ifName,ifAliasName,VlanID.
  4. Issue in accessing Rogue Detection tool has been fixed.

Config File Manager

  1. Option to Import the Cisco Devices from a CSV file has been included in the Config File Manager.
  2. Option to add descriptions for the devices has been included in Config File Manager.

Network Monitor

  1. Issue in sending normal alerts when no critical alerts are generated has been fixed in the Network Monitor tool.
  2. Option to import the device details to Network Monitor tool has been added.
  3. Email Alerting enhanced with alert escalation in Network Monitor Tool.

General

  1. Bandwidth Monitor Summary View now includes additional columns like Volume, Utilization, and Packets data.
  2. Option to edit the Interface Name added in Bandwidth Monitor tool.
  3. The unit of measurement of Volume and Speed will automatically get converted to their nearest units like KB/MB/GB and Kbps/Mbps/Gbps in the Bandwidth Monitor tool.
  4. Alert to notify when the device is down or when not responding to SNMP queries has been included in Bandwidth Monitor tool.
  5. User Access Control introduced - Create users in Technician roles who will have read-only access to the following tools - Switch Port Mapper, Network Monitor, Config File Manager, IP Address Manager, and Rogue Detection.
  6. Option to create custom reports has been included.
  7. Issue in exporting the complete data instead of the filtered data alone has been fixed.
  8. Scheduled Database backup has been added.
  9. Home Page Loading time decreased by query optimization.
  10. Issue in running OpUtils at port 80 has been fixed.
  11. Encoding issues in displaying non-Engilish data has been fixed.
  12. Confirm Password field included while changing the password.
  13. Issue in saving the alert configuration in Bandwidth Monitor tool has been fixed.
  14. Table navigation of all the view and reports enhanced with navigation links at the bottom of the table.
  15. Size to hold the "To Address" value in the database has been increased to accommodate multiple email addresses.

Build No: 5000 & 5600     

Enhancements & Bug Fixes between Build 5000 & 5600

Switch Port Mapper

  1. Ability to audit the changes made to the Switch Port Mapper has been included.
  2. Option to exclude trunk ports from scanning has been included in the Switch Port Mapper tool.
  3. Support for SNMPv3 added in Switch Port Mapper.
  4. The Summary View of the Switch Port Mapper has been enhanced.
  5. Issue in displaying duplicate row in the Switch Port Mapper has been fixed.
  6. Issue while updating switch OID in the Switch Port Mapper has been fixed.
  7. Issue while scanning the switch in Switch Port Mapper has been fixed.
  8. The Summary View of the Switch Port Mapper will now include more columns showing Subnet details, System Details, IP/MAC, etc.
  9. A new column, Sys Location, has been included.
  10. A report to view the Administratively Disabled Ports has been included.
  11. Switch Port Mapper now includes additional filters to view the stacked and normal ports in the view.
  12. Issue in Switch Port Mapper while retrieving the ifMTU value has been fixed.
  13. Switch Port Mapper will now include two additional fields: ifMtu & VLAN Name.
  14. Switch Port Mapper will now include one more additional field: Duplex.
  15. Switch Port Mapper search enhanced to include the columns to search like IP Address, MAC Address, Alias Name, Physical Location etc.
  16. Option to manually modify the ifAlias Name and Physical Location has been included in the Switch Port Mapper tool.
  17. Switch Port Mapper Alerts enhanced to with more options.
  18. UI Issue in Switch Port Mapper in accommodating all the VLAN IDs of Trunk Ports has been fixed
  19. System Type included for HP Procurve 2810 Switches.
  20. Switch Port  Mapper csv auto publish report has been improved.
  21. Switch Port Mapper alerts will now include the physical location of the device in the alert message.
  22. Ability to filter the view based in port status, availability etc., has been included in the Switch Port Mapper.
  23. Switch Usage reports have been included in Switch Port Mapper.
  24. Issue in displaying higher port count for Dell Switches has been fixed.
  25. Option to retrieve the details of the devices connected to Switch ports has been included in the Switch Port Mapper tool.
  26. Issue in adding Avaya Switch in Switch Port Mapper has been fixed.
  27. Switch Port Mapper will also notify the change in MAC Addresses through email.
  28. Switch Port Mapper Switch Details issue has been fixed.
  29. A new column, Device Type, has been included in the Switch Port Mapper.
  30. Switch Port Mapper now has options to add or remove columns from the Switch Details view.
  31. Exporting switch details from Switch Port Mapper will now include the subnet addresses and masks specified for SNMP Sweep.
  32. Classifying a port as stack port is now made configurable.
  33. Switch Port Mapper will now show all the IP Addresses of a device.
  34. Importing Switch inputs from a CSV file will now include options to specify the subnets to perform SNMP Sweep.
  35. Switch Port Mapper will now retrieve the MAC details from QBridge MIB, wherever applicable, in addition to Bridge MIB.
  36. Search results in Switch Port Mapper enhanced to include cross links.
  37. Issue in not displaying the group name in the Switch Port Mapper search results has been fixed.
  38. Option to perform SNMP sweep prior to scanning the switch has been included in the Switch Port Mapper tool.

IP Address Manager

  1. Active Directory Integration
  2. Details of the device from the Active Directory
  3. Hierarchical tree view of subnets
  4. Add/Delete subnets anywhere in the tree.
  5. Issue in displaying duplicate MAC Addresses in the IP Address Manager has been fixed.
  6. Ability to audit the changes made to the IP Address Manager has been included.
  7. Issue in displaying duplicate MAC Addresses in the IP Address Manager has been fixed.
  8. The IP availability status of individual subnets are automatically published to a csv file.
  9. Summary graph enhanced to include DNS Status, Device Category, NIC Type, and Reserved IPs.
  10. The discovered IP Addresses can be marked as Trusted, Guest and Rouge.
  11. Option to import the Custom Column values in the IP Address Manager tool has been added.
  12. Option to import the Subnets in the IP Address Manager tool has been added.
  13. IPAM scanning performance has been improved.
  14. Forward and Reverse Lookup included in IP Address Manager tool.
  15. IP Address Manager alerts enhanced to include more events.
  16. IP Address Manager will now include more reports like Subnet usage, Static IP Address Usage, etc.
  17. Issue in adding class C subnets with Class B subnet mask has been fixed.
  18. Option to add user-defined columns has been included in IP Address Manager
  19. Import option like Asset tag, Phone number,Alias Name,System Location has been included in IP Address Manager
  20. IP Address Manager enhanced to include the history of the IP Address allocations.
  21. CD Key and Serial Number columns included in IP Address Manager
  22. Option to retrieve details of IPs using WMI has been included in the IP Address Manager tool.
  23. Option to view the community string in IP Address Manager tool has been included.
  24. Issue in updating the IP Address Summary has been fixed.
  25. New help alert messages have been included in IP Address Manager
  26. Option to assign Owners for IP Addresses has been included in IP Address Manager.
  27. IP Address Manager search enhanced to include the columns to search like IP Address, MAC Address, Alias Name, Switch Name etc.
  28. The Summary View of IP Address Manager will now include the overall summary of all the subnets added.
  29. IP Address Manager tool enhanced to include a summary of the subnets in the Subnet Details View
  30. The Switch and Port details to which an IP is connected will now be shown in the Subnet Details View of the IP Address Manager
  31. Options to include the Location, Phone Number, and Asset Details have been added to the IP Address Manager tool.
  32. Resolve DNS Name has been improved
  33. IP Address Manager enhanced to include options to manually mark the status of the IP Addresses.
  34. Usability enhanced in the IP Address Manager to view the details based on the filters.
  35. Modify Reserved Status UI added for single IP.
  36. Ability to manually mark "Reserve" an IP Address has been included in the IP Address Manager tool.
  37. IP Address Manager tool enhanced to include subnet descriptions and VLAN details.
  38. Option to specify the scanning options has been included in the IP Address Manager tool.
  39. When approving a subnet that is automatically detected from routers, you can now specify additional subnet information.
  40. State of IP Addresses will also be updated based on the ARP data of Routers and Switches.
  41. UI enhancements made to the IP Address Manager tool

Config File Manager

  1. Issue while compare config files has been fixed in the Config File Manger Tool
  2. Option to retrieve the config files of devices across WAN has been included.
  3. Config File Manager enhanced to handle "bad file name" error that arises due to the file separator in some specific cases.
  4. Issue in selecting devices in Compare Config when there are more than 15 devices has been fixed.

Rogue Detection

  1. When the discovered device is available in the Active Directory, it is automatically marked as a Trusted Device.
  2. Issue generating email alert in Rogue Detection Tool has been fixed.
  3. Issue while modifying the router has been fixed.
  4. Rogue Detection tool enhanced to include filters to view the devices based on the subnet.

Router Scanning Enhancements

  1. MAC-IP retrieval through CLI enhanced to support executing the command from privileged mode.
  2. Option to retrieve the MAC-IP details through SSH has been included.
  3. Now routers will be scanned automatically after successfully added.
  4. On demand scanning for routers is added.

Wake On LAN Tool

  1. In Wake on Lan tool after task creation,mac or ip delete issuse is fixed.
  2. Now Wake On Lan supports for CLASS A & B IP's .
  3. Issue in Wake On LAN tool related to broadcast address is fixed.

General

  1. Support for running OpUtils in Windows Vista has been included.
  2. Issue in retrieving the MAC Address from the routers through SSH has been fixed.
  3. Option to specify the VNC port to be used by OpUtils to connect to a computer has been included.
  4. Data mismatch in IP Routes Tool has been fixed.
  5. Support for secured communication (HTTPS) has been included.
  6. Export icons included for all the reports.
  7. Cross Site Scripting vulnerability and Information Disclosure vulnerability issue has been fixed
  8. Trap Receiver will now retain the last state before OpUtils was shutdown.
  9. Issue in saving the alert configuration from Alert view has been fixed.
  10. Query Executing option added for debug
  11. Cross-linking to Ping, DNS Resolver, and System Explorer have been included in Switch Port Mapper, IP Address Manager, Wake on LAN, Network Monitor, and Config File Manager tools.
  12. Cross links to other tools for troubleshooting has been included in Scan tools and Switch Port Mapper.
  13. Issue in handling special characters in community strings is fixed.
  14. Subnet List tool has been included in System Explorer.
  15. Essential tools has been brought to main stream of focus i.e. on the Main tabs based on the license type.
  16. Support tab has been removed and is changed as a easy to use link.
  17. Separate tab for Tools has been removed, and it is available in the Home tab.
  18. Settings & Knowledge Base link included at top-right
  19. Import Sound option has been moved to the Admin tab.