This section explains how to use the AddMonitor API to add monitors of the category type Servers. The following servers are supported:
Supported HTTP methods: POST
Allowed roles: Administrator
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&username=[USERNAME]&mode=[MODE]&snmptelnetport=[SNMPTELNETPORT]&password=[PASSWORD]&prompt=[PROMPT]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaabbbbbbccccccddddddeeeeee&type=servers&displayname=apmaix&host=adventaix&os=AIX&username=admin&mode=TELNET&snmptelnetport=23&password=appman&prompt=#&timeout=30&addgivenname=false
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&username=[USERNAME]&mode=[MODE]&snmptelnetport=[SNMPTELNETPORT]&password=[PASSWORD]&prompt=[PROMPT]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&mode=SSH&password=T05t%25jq&os=AIX&snmptelnetport=22&displayname=AIXSSH&host=aix-host3-2k23&type=servers&prompt=$&timeout=10&username=test&addgivenname=false
The parameters involved in the API request are described below. Also, refer to the list of common Request Parameters
| Field | Description |
|---|---|
| type | The category type of monitor you want to add. The value should be 'servers'. |
| host | The name of the host where the AIX server is running. |
| os | The operating system of the server. Value is 'AIX'. |
| username | The username of the AIX server. |
| mode | The mode of monitoring the AIX server. Value should be either TELNET or SSH. |
| snmptelnetport | The port number where Telnet service is running. Default value is 23. |
| password | The password of the AIX server. |
| timeout | The time out value in seconds. |
| prompt | The command prompt value. Value is '$' |
| forceadd | This parameter is used to force Applications Manager to bypass availability and other authentication-related checks and add the monitor. Possible values are:
|
| addgivenname | Specifies if you want to set the host name of the monitor as the Host Name / IP Address that you have configured in the API. (true or false) |
| passphrase | Specify a Passphrase if the private key is protected with one for SSH Authentication. |
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&subnet=[SUBNET]&pollInterval=[POLLINTERVAL] &sslenabled=[TRUE/FALSE] &os=[OS]&username=[USERNAME]&password=[PASSWORD]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaabbbbbbccccccddddddeeeeee&type=servers&displayname=apmas400&host=pub1.rzkh.de&subnet=255.255.255.0&pollInterval=5&sslenabled=true&os=AS400/iSeries&username=admin&password=appman&timeout=30&addgivenname=false
The parameters involved in the API request are described below. Also, refer to the list of common Request Parameters
| Field | Description |
|---|---|
| type | The category type of the monitor you want to add. Value should be 'servers'. |
| host | The name of the host where the IBM i server is running. |
| subnet | The subnet mask value |
| pollInterval | The polling interval for the monitor. |
| sslenabled | Indicates whether the monitored connection uses SSL (Secure Sockets Layer) for secure communication between the monitoring tool and the IBM resource. Value is true/false. |
| os | The operating system of the server. Value is 'AS400/iSeries'. |
| username | The username of the IBM i server. |
| timeout | The time out value in seconds. |
| password | The password of the IBM i server. |
| forceadd | This parameter is used to force Applications Manager to bypass availability and other authentication-related checks and add the monitor. Possible values are:
|
| addgivenname | Specifies if you want to set the host name of the monitor as the Host Name / IP Address that you have configured in the API. (true or false) |
| passphrase | Specify a Passphrase if the private key is protected with one for SSH Authentication. |
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&username=[USERNAME]&mode=[MODE]&snmptelnetport=[TELNETPORT]&password=[PASSWORD]&prompt=[PROMPT]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmfreebsd&host=freebsd-host1-2k23&subnet=255.255.255.0&pollInterval=5&os=FreeBSD&username=admin&password=appman&mode=TELNET&snmptelnetport=23&prompt=$&timeout=30&addgivenname=false
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&username=[USERNAME]&mode=[MODE]&snmptelnetport=[TELNETPORT]&password=[PASSWORD]&prompt=[PROMPT]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&mode=SSH&subnet=255.255.255.0&password=r10baleM%252oo2&os=FreeBSD&snmptelnetport=22&displayname=APMFreeBSDSSH&host=freebsd-host2-2k23&type=servers&prompt=%24&timeout=30&username=test&addgivenname=false
Syntax:
V1/V2https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&snmpPort=[SNMPPORT]&os=[OS]&mode=[MODE]&timeout=[TIMEOUT]&snmpCommunityString=[snmpCommunityString]&snmpVersionValue=[snmpVersion]&addgivenname=[true/false]
V3https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&port=[PORT]&snmpCommunityString=[SNMPCOMMUNITYSTRING]&timeout=[TIMEOUT]&os=[OS]&mode=[MODE]&snmpSecurityLevel=[SNMPSECURITYLEVEL]&snmpUserName=[SNMPUSERNAME]&snmpAuthPassword=[SNMPAUTHPASSWORD]&snmpAuthProtocol=[SNMPAUTHPROTOCOL]&snmpPrivPassword=[SNMPPRIVPASSWORD]&snmpPrivProtocol=[SNMPPRIVPROTOCOL]&snmpVersionValue=[SNMPVERSIONVALUE]&snmpContextName=[SNMPCONTEXTNAME]&addgivenname=[true/false]
Sample Request:
V1/V2https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsnmpserverv1v2&host=apmsnmp-host-1&snmpPort=161&os=FreeBSD&mode=SNMP&timeout=5&snmpCommunityString=public&snmpVersionValue=v1v2&addgivenname=false
V3https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsnmpserverv3&host=apmsnmp-host-1&snmpPort=161&os=FreeBSD&mode=SNMP&timeout=5&snmpSecurityLevel=AUTHPRIV&snmpUserName=SHA256AES128&snmpAuthPassword=********&snmpAuthProtocol=SHA_256&snmpPrivPassword=*******&snmpPrivProtocol=AES_128&snmpVersionValue=v3&snmpContextName=&addgivenname=false
The parameters involved in the API request are described below. Also, refer to the list of common Request Parameters
| Field | Description |
|---|---|
| type | The category type of the monitor you want to add. Value should be 'servers'. |
| host | The name of the host where the FreeBSD server is running. |
| subnet | The subnet mask value |
| pollInterval | The polling interval for the monitor. |
| os | The operating system of the server. Value is 'FreeBSD'. |
| username | The username of the FreeBSD server. |
| password | The password of the FreeBSD server. |
| mode | The mode of monitoring. Value should be either SNMP, TELNET or SSH. |
| snmpCommunityString | The SNMP community string required for read-only access of SNMP data on the Server. Mandatory when using SNMP mode. The default value is 'public'. |
| snmptelnetport | The port where Telnet service is running. Default value is 23. |
| timeout | The time out value in seconds. |
| prompt | The command prompt value. Value is $. |
| forceadd | This parameter is used to force Applications Manager to bypass availability and other authentication-related checks and add the monitor. Possible values are:
|
| addgivenname | Specifies if you want to set the host name of the monitor as the Host Name / IP Address that you have configured in the API. (true or false) |
| passphrase | Specify a Passphrase if the private key is protected with one for SSH Authentication. |
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&username=[USERNAME]&mode=[MODE]&snmptelnetport=[TELNETPORT]&password=[PASSWORD]&prompt=[PROMPT]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmhpux&host=cagent-hpux2&snmptelnetport=23&os=HP-UX&mode=TELNET&username=admin&password=appman&timeout=30&addgivenname=false
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&username=[USERNAME]&mode=[MODE]&snmptelnetport=[TELNETPORT]&password=[PASSWORD]&prompt=[PROMPT]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmhpux&username=admin&password=appman&os=HP-UX&mode=SSH&snmptelnetport=22&host=hpuxtests&timeout=30 https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&mode=SSH&password=Tet%24%40850&os=HP-UX&snmptelnetport=22&displayname=HP-UXSSH&host=hpux-host-2k23&type=servers&prompt=%24&timeout=30&username=test&addgivenname=false
The parameters involved in the API request are described below. Also, refer to the list of common Request Parameters
| Field | Description |
|---|---|
| type | The category type of the monitor you want to add. Value should be 'servers'. |
| username | The username of the HP-UX server. |
| password | The password of the HP-UX server. |
| os | The operating system of the server. Value is 'HP-UX'. |
| mode | The mode of monitoring. Values are SSH or TELNET |
| snmptelnetport | The port where SSH/Telnet service is running. Default values are 23 (for Telnet) and 22 (for SSH). |
| timeout | The time out value in seconds. |
| host | The name of the host where the HP-UX server is running. |
| forceadd | This parameter is used to force Applications Manager to bypass availability and other authentication-related checks and add the monitor. Possible values are:
|
| addgivenname | Specifies if you want to set the host name of the monitor as the Host Name / IP Address that you have configured in the API. (true or false) |
| passphrase | Specify a Passphrase if the private key is protected with one for SSH Authentication. |
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&username=[USERNAME]&mode=[MODE]&snmptelnetport=[TELNETPORT]&password=[PASSWORD]&prompt=[PROMPT]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=APMLINUX&host=apptest-centos-2k23&snmptelnetport=23&os=Linux&mode=TELNET&username=admin&password=appman&timeout=30&forceadd=true&addgivenname=false
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&username=[USERNAME]&mode=[MODE]&snmptelnetport=[TELNETPORT]&password=[PASSWORD]&prompt=[PROMPT]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=APMLINUX &host=apptest-centos-2k23&snmptelnetport=22&os=Linux&mode=SSH&timeout=10&username=admin&password=appman&prompt=$&addgivenname=false
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&mode=SSH&password=Ubuntu%40123&os=Linux&snmptelnetport=22&displayname=LinuxSSH&host=apptest-centos-2k23&type=servers&timeout=10&username=test&forceadd=true&addgivenname=false
Syntax:
V1/V2https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&snmpPort=[SNMPPORT]&os=[OS]&mode=[MODE]&timeout=[TIMEOUT]&snmpCommunityString=[snmpCommunityString]&snmpVersionValue=[snmpVersion]&addgivenname=[true/false]
V3https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&port=[PORT]&snmpCommunityString=[SNMPCOMMUNITYSTRING]&timeout=[TIMEOUT]&os=[OS]&mode=[MODE]&snmpSecurityLevel=[SNMPSECURITYLEVEL]&snmpUserName=[SNMPUSERNAME]&snmpAuthPassword=[SNMPAUTHPASSWORD]&snmpAuthProtocol=[SNMPAUTHPROTOCOL]&snmpPrivPassword=[SNMPPRIVPASSWORD]&snmpPrivProtocol=[SNMPPRIVPROTOCOL]&snmpVersionValue=[SNMPVERSIONVALUE]&snmpContextName=[SNMPCONTEXTNAME]&addgivenname=[true/false]
Sample Request:
V1/V2https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsnmpserverv1v2&host=apmsnmp-host-1&snmpPort=161&os=Linux&mode=SNMP&timeout=5&snmpCommunityString=public&snmpVersionValue=v1v2&forceadd=true&addgivenname=false
V3https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsnmpserverv3&host=apmsnmp-host-1&snmpPort=161&os=Linux&mode=SNMP&timeout=5&snmpSecurityLevel=AUTHPRIV&snmpUserName=SHA256AES128&snmpAuthPassword=********&snmpAuthProtocol=SHA_256&snmpPrivPassword=*******&snmpPrivProtocol=AES_128&snmpVersionValue=v3&snmpContextName=&forceadd=true&addgivenname=false
The parameters involved in the API request are described below. Also, refer to the list of common request parameters.
| Field | Description |
|---|---|
| type | The category type of the monitor you want to add. Value should be 'servers'. |
| host | The name of the host where the Linux server is running. |
| snmptelnetport | The port where SSH/Telnet/SNMP is running. Default values are 23 (for Telnet), 22 (for SSH) and 161 (for SNMP). |
| os | The operating system of the server. Value is 'Linux'. |
| timeout | The time out value in seconds. |
| mode | The mode of monitoring. Value is either SNMP, SSH or TELNET. (For SNMP mode, the community string has to be added in the API request parameter.) |
| forceadd | This parameter is used to force Applications Manager to bypass availability and other authentication-related checks and add the monitor. Possible values are:
|
| addgivenname | Specifies if you want to set the host name of the monitor as the Host Name / IP Address that you have configured in the API. (true or false) |
| passphrase | Specify a Passphrase if the private key is protected with one for SSH Authentication. |
| username | The username to use the Telnet/SSH mode of monitoring. |
| password | The password to use the Telnet/SSH mode of monitoring. |
| prompt | The command prompt value. Value is '$' |
| snmpCommunityString | The SNMP community string required for read-only access of SNMP data on the Server. Mandatory when using SNMP mode. The default value is 'public'. |
| snmpVersionValue | The SNMP version to be used for access of SNMP data on the server. Mandatory when using SNMP mode. Possible values are v1v2 or v3. |
| snmpSecurityLevel | The SNMP V3 SecurityLevel. The value will be NOAUTHNOPRIV, AUTHNOPRIV, AUTHPRIV |
| snmpUserName | The SNMP V3 Principal |
| snmpAuthProtocol | The SNMP V3 AuthProtocol |
| snmpAuthPassword | The SNMP V3 AuthPassword |
| snmpPrivProtocol | The SNMP V3 PrivProtocol |
| snmpPrivPassword | The SNMP V3 PrivPassword |
| snmpContextName | The SNMP V3 Context name |
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&username=[USERNAME]&mode=[MODE]&snmptelnetport=[TELNETPORT]&password=[PASSWORD]&prompt=[PROMPT]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmmac&host=apptest-mac&snmptelnetport=23&os=Mac OS&mode=TELNET&username=admin&password=appman&timeout=30&addgivenname=false
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&username=[USERNAME]&mode=[MODE]&snmptelnetport=[TELNETPORT]&password=[PASSWORD]&prompt=[PROMPT]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&mode=SSH&password=Server%40123&os=Mac+OS&snmptelnetport=22&displayname=MAC+SSH&host=apptest-mac-1&type=servers&timeout=30&username=admin&addgivenname=false
Syntax:
V1/V2https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&snmpPort=[SNMPPORT]&os=[OS]&mode=[MODE]&timeout=[TIMEOUT]&snmpCommunityString=[snmpCommunityString]&snmpVersionValue=[snmpVersion]&addgivenname=[true/false]
V3https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&port=[PORT]&snmpCommunityString=[SNMPCOMMUNITYSTRING]&timeout=[TIMEOUT]&os=[OS]&mode=[MODE]&snmpSecurityLevel=[SNMPSECURITYLEVEL]&snmpUserName=[SNMPUSERNAME]&snmpAuthPassword=[SNMPAUTHPASSWORD]&snmpAuthProtocol=[SNMPAUTHPROTOCOL]&snmpPrivPassword=[SNMPPRIVPASSWORD]&snmpPrivProtocol=[SNMPPRIVPROTOCOL]&snmpVersionValue=[SNMPVERSIONVALUE]&snmpContextName=[SNMPCONTEXTNAME]&addgivenname=[true/false]
Sample Request:
V1/V2https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsnmpserverv1v2&host=apmsnmp-host-1&snmpPort=161&os=Mac OS&mode=SNMP&timeout=5&snmpCommunityString=public&snmpVersionValue=v1v2&addgivenname=false
V3https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsnmpserverv3&host=apmsnmp-host-1&snmpPort=161&os=Mac OS&mode=SNMP&timeout=5&snmpSecurityLevel=AUTHPRIV&snmpUserName=SHA256AES128&snmpAuthPassword=********&snmpAuthProtocol=SHA_256&snmpPrivPassword=*******&snmpPrivProtocol=AES_128&snmpVersionValue=v3&snmpContextName=&addgivenname=false
The parameters involved in the API request are described below. Also, refer to the list of common Request Parameters
| Field | Description |
|---|---|
| type | The category type of the monitor you want to add. Value should be 'servers'. |
| host | The name of the host where the Mac OS is running. |
| snmptelnetport | The port where SSH/Telnet/SNMP is running. Default values are 23 (for Telnet), 22 (for SSH) and 161 (for SNMP). |
| os | The operating system of the server. Value is 'Mac OS'. |
| mode | The mode of monitoring. Value is either SNMP, SSH or TELNET. |
| username | The user name of the Mac OS server. |
| timeout | The time out value in seconds. |
| password | The password of the Mac OS server. |
| snmpCommunityString | The SNMP community string required for read-only access of SNMP data on the Server. Mandatory when using SNMP mode. The default value is 'public'. |
| forceadd | This parameter is used to force Applications Manager to bypass availability and other authentication-related checks and add the monitor. Possible values are:
|
| addgivenname | Specifies if you want to set the host name of the monitor as the Host Name / IP Address that you have configured in the API. (true or false) |
| passphrase | Specify a Passphrase if the private key is protected with one for SSH Authentication. |
Syntax:
V1/V2
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&snmpPort=[SNMPPORT]&os=[OS]&mode=[MODE]&timeout=[TIMEOUT]&snmpCommunityString=[snmpCommunityString]&snmpVersionValue=[snmpVersion]&addgivenname=[true/false]
V3
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&port=[PORT]&snmpCommunityString=[SNMPCOMMUNITYSTRING]&timeout=[TIMEOUT]&os=[OS]&mode=[MODE]&snmpSecurityLevel=[SNMPSECURITYLEVEL]&snmpUserName=[SNMPUSERNAME]&snmpAuthPassword=[SNMPAUTHPASSWORD]&snmpAuthProtocol=[SNMPAUTHPROTOCOL]&snmpPrivPassword=[SNMPPRIVPASSWORD]&snmpPrivProtocol=[SNMPPRIVPROTOCOL]&snmpVersionValue=[SNMPVERSIONVALUE]&snmpContextName=[SNMPCONTEXTNAME]&addgivenname=[true/false]
Sample Request:
V1/V2
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsnmpserverv1v2&host=apmsnmp-host-1&snmpPort=161&os=Novell&mode=SNMP&timeout=5&snmpCommunityString=public&snmpVersionValue=v1v2&addgivenname=false
V3
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsnmpserverv3&host=apmsnmp-host-1&snmpPort=161&os=Novell&mode=SNMP&timeout=5&snmpSecurityLevel=AUTHPRIV&snmpUserName=SHA256AES128&snmpAuthPassword=********&snmpAuthProtocol=SHA_256&snmpPrivPassword=*******&snmpPrivProtocol=AES_128&snmpVersionValue=v3&snmpContextName=&addgivenname=false
The parameters involved in the API request are described below. Also, refer to the list of common Request Parameters
| Field | Description |
|---|---|
| type | The category type of the monitor you want to add. Value should be 'servers'. |
| host | The name of the host where the Novell server is running. |
| snmptelnetport | The port where SNMP is running. Default value is 161. |
| os | The operating system of the server. Value is 'Novell'. |
| timeout | The time out value in seconds. |
| mode | The mode of monitoring specified for the server. Value is 'SNMP'. |
| snmpCommunityString | The SNMP community string required for read-only access of SNMP data on the Server. The default value is 'public'. |
| forceadd | This parameter is used to force Applications Manager to bypass availability and other authentication-related checks and add the monitor. Possible values are:
|
| addgivenname | Specifies if you want to set the host name of the monitor as the Host Name / IP Address that you have configured in the API. (true or false) |
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&username=[USERNAME]&mode=[MODE]&snmptelnetport=[TELNETPORT]&password=[PASSWORD]&prompt=[PROMPT]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsolaris&host=cagent-solaris2&snmptelnetport=23&os=SUN&mode=TELNET&username=admin&password=appman&timeout=30&addgivenname=false
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&mode=TELNET&password=Te5t%40123&os=SUN&snmptelnetport=23&displayname=SunSolarisTelnet&host=sunsolaris-host-2k23&type=servers&timeout=30&username=test&addgivenname=false
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&username=[USERNAME]&mode=[MODE]&snmptelnetport=[TELNETPORT]&password=[PASSWORD]&prompt=[PROMPT]&timeout=[TIMEOUT]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&mode=SSH&password=Te5t@123&os=SUN&snmptelnetport=22&displayname=SolarisSSH&host=solaris2-host-2k23&type=servers&timeout=10&username=test&addgivenname=false
Syntax:
V1/V2https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&snmpPort=[SNMPPORT]&os=[OS]&mode=[MODE]&timeout=[TIMEOUT]&snmpCommunityString=[snmpCommunityString]&snmpVersionValue=[snmpVersion]&addgivenname=[true/false]
V3https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&port=[PORT]&snmpCommunityString=[SNMPCOMMUNITYSTRING]&timeout=[TIMEOUT]&os=[OS]&mode=[MODE]&snmpSecurityLevel=[SNMPSECURITYLEVEL]&snmpUserName=[SNMPUSERNAME]&snmpAuthPassword=[SNMPAUTHPASSWORD]&snmpAuthProtocol=[SNMPAUTHPROTOCOL]&snmpPrivPassword=[SNMPPRIVPASSWORD]&snmpPrivProtocol=[SNMPPRIVPROTOCOL]&snmpVersionValue=[SNMPVERSIONVALUE]&snmpContextName=[SNMPCONTEXTNAME]&addgivenname=[true/false]
Sample Request:
V1/V2https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsnmpserverv1v2&host=apmsnmp-host-1&snmpPort=161&os=SUN&mode=SNMP&timeout=5&snmpCommunityString=public&snmpVersionValue=v1v2&addgivenname=false
V3https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsnmpserverv3&host=apmsnmp-host-1&snmpPort=161&os=SUN&mode=SNMP&timeout=5&snmpSecurityLevel=AUTHPRIV&snmpUserName=SHA256AES128&snmpAuthPassword=********&snmpAuthProtocol=SHA_256&snmpPrivPassword=*******&snmpPrivProtocol=AES_128&snmpVersionValue=v3&snmpContextName=&addgivenname=false
The parameters involved in the API request are described below. Also, refer to the list of common Request Parameters
| Field | Description |
|---|---|
| type | The category type of the monitor you want to add. Value should be 'servers'. |
| host | The name of the host where the Sun Solaris server is running. |
| snmptelnetport | The port where SSH/Telnet/SNMP is running. Default values are 23 (for Telnet), 22 (for SSH) and 161 (for SNMP). |
| os | The operating system of the server. Value is 'SUN'. |
| mode | The mode of monitoring specified for the server. Value should be either SNMP, TELNET or SSH. |
| username | The user name of the Sun Solaris server. |
| timeout | The time out value in seconds. |
| password | The password of the Sun Solaris server. |
| snmpCommunityString | The SNMP community string required for read-only access of SNMP data on the Server. Mandatory when using SNMP mode. The default value is 'public'. |
| forceadd | This parameter is used to force Applications Manager to bypass availability and other authentication-related checks and add the monitor. Possible values are:
|
| addgivenname | Specifies if you want to set the host name of the monitor as the Host Name / IP Address that you have configured in the API. (true or false) |
| passphrase | Specify a Passphrase if the private key is protected with one for SSH Authentication. |
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&displayname=[DISPLAYNAME]&host=[HOST]&os=[OS]&mode=[MODE]&username=[USERNAME]&password=[PASSWORD]&timeout=[TIMEOUT]&kerberos_status=[KERBEROS_FLAG]&eventlog_status=[EVENTLOG_STATUS]&type=[TYPE]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&displayname=Windows2k19&host=app-w19-7&os=Windows 2019&mode=WMI&username=administrator&password=abc123&timeout=180&kerberos_status=false&eventlog_status=false&type=Servers&addgivenname=false
v1/v2
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&snmpPort=[SNMPPORT]&os=[OS]&mode=[MODE]&timeout=[TIMEOUT]&snmpCommunityString=[snmpCommunityString]&snmpVersionValue=[snmpVersion]&addgivenname=[true/false]
v3
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&type=[TYPE]&displayname=[DISPLAYNAME]&host=[HOST]&port=[PORT]&snmpCommunityString=[SNMPCOMMUNITYSTRING]&timeout=[TIMEOUT]&os=[OS]&mode=[MODE]&snmpSecurityLevel=[SNMPSECURITYLEVEL]&snmpUserName=[SNMPUSERNAME]&snmpAuthPassword=[SNMPAUTHPASSWORD]&snmpAuthProtocol=[SNMPAUTHPROTOCOL]&snmpPrivPassword=[SNMPPRIVPASSWORD]&snmpPrivProtocol=[SNMPPRIVPROTOCOL]&snmpVersionValue=[SNMPVERSIONVALUE]&snmpContextName=[SNMPCONTEXTNAME]&addgivenname=[true/false]
v1/v2
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsnmpserverv1v2&host=apmsnmp-host-1&snmpPort=161&os=Linux&mode=SNMP&timeout=5&snmpCommunityString=public&snmpVersionValue=v1v2&addgivenname=false
v3
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&type=servers&displayname=apmsnmpserverv3&host=apmsnmp-host-1&snmpPort=161&os=Linux&mode=SNMP&timeout=5&snmpSecurityLevel=AUTHPRIV&snmpUserName=SHA256AES128&snmpAuthPassword=********&snmpAuthProtocol=SHA_256&snmpPrivPassword=*******&snmpPrivProtocol=AES_128&snmpContextName=&snmpVersionValue=v3&addgivenname=false
The parameters involved in the API request are described below. Also, refer to the list of common Request Parameters
| Field | Description |
|---|---|
| type | The category type of the monitor you want to add. Value should be 'servers'. |
| host | The name of the host where the Windows server is running. |
| snmptelnetport | The port where SNMP is running. Default value is 161. |
| os | The operating system of the server. Values can be Windows 2000, Windows 2003, Windows 2008, Windows 2012, Windows 7, Windows 8, Windows XP, WindowsNT or Windows Vista |
| mode | The mode of monitoring specified for the server. Value should be either SNMP or WMI. |
| username | The user name of the Windows server. |
| password | The password of the Windows server. |
| timeout | The time out value in seconds. |
| eventlog_status | Specifies if Event Log Monitoring is enabled. Parameter values are true/false. |
| snmpCommunityString | The SNMP community string required for read-only access of SNMP data on the Server. Mandatory when using SNMP mode. The default value is 'public'. |
| forceadd | This parameter is used to force Applications Manager to bypass availability and other authentication-related checks and add the monitor. Possible values are:
|
| addgivenname | Specifies if you want to set the host name of the monitor as the Host Name / IP Address that you have configured in the API. (true or false) |
| passphrase | Specify a Passphrase if the private key is protected with one for SSH Authentication. |
| kerberos_status | Specifies if Kerberos authentication is enabled. Possible values are either true / false. |
Syntax:
https://[HOST]:[PORT]/AppManager/xml/AddMonitor?apikey=[APIKEY]&password=[PASSWORD]&Version=[VERSION]&displayname=[DISPLAYNAME]&host=[HOST]&DiscoverNodes=[DISCOVEYNODES]&type=[TYPE]&timeout=[TIMEOUT]&username=[USERNAME]&pollinterval=[POLLINTERVAL]&EventLog=[EVENTLOG]&addgivenname=[true/false]
Sample Request:
https://apm-prod-server:8443/AppManager/xml/AddMonitor?apikey=aaaaaaaaabbbbbbbbbbbbbbbbccccc&password=sqlServer%2321&Version=2016&displayname=Windows+cluster&host=172.24.132.44&DiscoverNodes=1&type=Windows+Cluster&timeout=30&username=amdsql.com%5Cadministrator&pollinterval=5&EventLog=NO&addgivenname=false
The parameters involved in the API request are described below. Also, refer to the list of common Request Parameters
| Field | Description |
|---|---|
| type | The category type of the monitor you want to add. Value should be Windows Cluster |
| host | The name of the host where the Windows server clusters are running. |
| version | The version of the Windows Server Clusters. Possible values are:
|
| DiscoverNodes | Specify if you need to discover nodes. Possible Values are:
|
| EventLog | Specify if you need to display Event Logs.Possible Values are:
|
| pollInterval | The interval at which the server needs to be polled. This variable is optional. If no value is mentioned, the default value of 5 minutes will be taken. |
| forceadd | This parameter is used to force Applications Manager to bypass availability and other authentication-related checks and add the monitor. Possible values are:
|
| addgivenname | Specifies if you want to set the host name of the monitor as the Host Name / IP Address that you have configured in the API. (true or false) |
| passphrase | Specify a Passphrase if the private key is protected with one for SSH Authentication. |
