Discovering storage devices

 

The topics covered under this section are:

Prerequisites for Device discovery

The list of storage devices that are monitored by OpManager Plus and their respective supported models, features supported and prerequisites for monitoring are listed below.

 

SAN Switches Storage Arrays Tape Libraries

 

Adding a device

 

After the initial discovery, you can use 'Add Storage Device' option under Settings → Discovery to add a new device.
 

   Note: Only Admin users can add devices.


Steps for adding a Device :

    • Click the ‘Settings’ tab in the OpManager Plus client.
    • Select ‘Discovery' tab and click on 'Add Storage Device'.
    • Enter the IP address of the new device.
    • Choose the Device Type whether it is a RAID array, FC Switch or a Tape Library.
    • Choose the Device model of the storage device.
    • Depending on the Device model selected, enter the SNMP/SMI credential to be used.

         Note: If you want to add a new credential, click the 'Add Credential' button on the top right corner and    
         provide the necessary details.

 

  • You can test the device right away from the same window by clicking the 'Test Connection' button.
  • Click 'Add Device' button to add it.

Adding Device details
 

Clicking on any device name in the Inventory tab takes you to the device snapshot page. There you can view all the operational stats of the device in a single pane and also its basic details such as IP Address, Device vendor and model, Firmware version, and so on.

 

To edit the device details

    1. Go to the Inventory tab, click on ‘Storage’ and then click on the device whose details you want to edit.
    2. In the device snapshot page that is opened, click on the three-line menu button on the top-right corner of the screen and select ‘Edit Device Details’.
    3. Here, you can change the details of the device namely IP Address, Display name and the monitoring interval.

 

   Note: Only Admin users can add and edit device details.
fBack to Top