OpManager v12.9

Build 12.9.100- June 04, 2026

New Feature

  • Firewall: SupportID: 12292991 - Introduced Security Rating, Baseline Rating, and Regulatory Rating scores in the Executive Summary Report and Policy Overview pages to provide enhanced visibility into firewall policy health, baseline adherence, and regulatory compliance.

Enhancements

  • Firewall: SupportID: 12729995, 13218270 - Added support for capturing URL Categories and Profiles configured in PaloAlto Security Rules in the Policy Overview and Policy Anomaly reports.

Issues Fixed

  • General: Due to security reasons, certain special characters has been restricted from Dashboard name during dashboard creation and update.
  • Firewall: SupportID: 12521452 - Incorrect logging status was displayed for parent rules of inline layers in Check Point, where parent rules were shown as logging disabled by default.
  • Firewall: SupportID: 12816704 - Frequent socket timeout exceptions occurred in Device Rule API mode, causing connection timeout issues during device rule retrieval.
  • Firewall: SupportID: 12983378 - A parsing issue related to NAT IP Pool data was identified in Juniper SRX devices. This issue has been fixed.
  • Firewall: SupportID: 13033390 - A PaloAlto configuration parsing issue caused partial parsing and skipped valid rule sections such as pre/post rules during conditional XPath evaluation. This issue has been fixed.

Build 12.9.000- June 01, 2026

New Feature

  • General : Introduced support for the TongWeb application server.

Enhancements

  • General : JRE has been migrated to version 17.0.19+10-LTS.
  • General : PostgreSQL version has been upgraded to 17.10. The PostgreSQL vulnerability issues from version 14.22 have been fixed.
  • General : PostgreSQL JDBC driver, MSSQL JDBC driver and various product-specific components have been updated.
  • General : Apache Tomcat has been updated to enhance security.
  • NetFlow : HighPerf has been upgraded to the latest version with CStore 5.3.24.

Build 12.8.735 - May 22, 2026

Enhancements

  • OpManager : The Interface Snapshot page now displays all SNMP Traffic widgets and Flow Analysis widgets together in a single view, providing improved visibility and enhanced traffic analysis.
  • OpManager : Manage, Unmanage, and Delete operations for OpManager and its Flow Analysis interfaces have now been unified with common configuration options for interface operations.
  • OpManager : Suppress alarm configuration for both OpManager and its Flow Analysis module is now handled from a single location, simplifying alarm management and configuration.

Issues Fixed

  • OpManager : Support IDs : 13134595, 12922007 - Administrators authenticated through Active Directory (AD) under the NCM All Devices Scope were unable to access certain Network Configuration Manager (NCM) functionalities after login. This issue has now been resolved.

Build 12.8.734 - May 20, 2026

New Feature

  • OpManager: Introduced Script Monitoring support for Unix Agent-monitored devices. This script can be configured to be executed either on the local machine (OpManager installed server) or on the remote monitored machine.

Enhancements

  • OpManager: Log File Monitoring now supports dynamic files generated daily or monthly using date-based naming formats, enabling effective tracking of time-based log files and their contents.
  • OpManager: Windows Monitoring Agent now requires password verification to uninstall the agent or update the server details the agent uses to communicate with, improving maintenance security and control.
  • OpManager: Unix Agent binaries are now automatically downloaded from the official site when updates are available. For air-gapped environments, a manual upload option has been introduced, allowing the archive to be downloaded separately and uploaded via the GUI.
  • OpManager: Previously, switching from agent-less to agent-based monitoring for virtual machines was limited to VMs where the Vendor field matched the OS vendor name. Support has now been extended to include VMs with Virtual Vendor names as well.
  • OpManager: Optimized Monitoring Agent upgrade request handling to manage endpoint-side blocking failures more efficiently, improving overall upgrade reliability.
  • OpManager: Windows Monitoring Agents now support a device-specific periodic interval for transferring collected files, enabling more granular control over data transfer per agent.
  • OpManager: Streamlined Unix Monitoring Agent-to-server communication during failover switchovers in HA-configured setups, improving reliability.
  • OpManager: Hardware monitoring support has been introduced for Cisco Firepower 2k/4k series/3130, Cisco MDS/C8500/C1300, Cisco Catalyst 8200 and Fortigate FGT 200F/FG 40F firewall devices.
  • OpManager: Support for non-Basic Latin characters has now been added to the MS Teams team name and channel name fields.
  • General: Improved the Content Security Policy (CSP) configuration to strengthen application security.
  • OpManager: Fortinet VPN tunnel hostnames are now displayed by default in the VPN summary list instead of IP addresses.
  • OpManager: Custom field import via CSV now supports excluding validation checks using a param.
  • OpManager: 30 new Aruba device templates have been added to improve network discovery classification.
  • OpManager: Telemetry Credentials are now handled in accordance with FIPS compliance standards.
  • OpManager: The character limit for Nutanix Volume Group names has been enhanced to accommodate larger values.
  • OpManager: The Ember.js version used for the Advanced Report has been upgraded to 6.4.

Issues Fixed

  • General: In some cases, Log360 audit logs were not being forwarded after the service startup. This issue has now been resolved.
  • OpManager: Previously, in some environments, the auto self-healing mechanism was not triggered in Windows Monitoring Agents, leading to increased resource consumption. This issue has now been fixed.
  • OpManager: Previously, "Clear alarms" notifications were not triggered in the Custom Integration Chat option. This issue has now been fixed.
  • OpManager: Previously, there was a delay in loading the Notification profiles when a large number of custom integrations were configured. This has been fixed.
  • OpManager: Previously, in some cases there was an issue in clearing the previous values for the Alarms/Event dynamic variables while triggering notifications for third party integrations, this is fixed now.
  • OpManager: Previously, there were slowness in accessing Devices Inventory page when logged in as user with selected Device group access if a large number of groups assigned to the user. This has been fixed now.
  • General: The 7za process was consuming high CPU resources during Live Backup. This issue has now been fixed.
  • OpManager: Previously, an incomplete shutdown of OpManager did not shut down the APM plugin properly, causing issues in failover setups. This issue has now been fixed.
  • General: Previously, if an NCM backup failed initially and succeeded in a subsequent attempt, the corresponding success alert was not triggered. This issue has now been fixed.
  • OpManager: Previously, after applying the Standard License, the Automatic Refresh setting (Settings → Automatic Refresh) could not be saved due to API restrictions. This issue has now been fixed.
  • General: Previously, a high number of requests was observed during IPMI data synchronization from Probe to Central. This issue has now been fixed.
  • OpManager: Previously, monitor failure alerts in the Data Collection Manager were triggered before reaching the configured number of consecutive failures due to incorrect failure count increment and reset behavior. This issue has now been fixed.
  • OpManager: Previously, if a custom vendor name matched a newly added vendor name differing only in letter case, the corresponding default monitors were not added during the upgrade. This issue has now been fixed.
  • OpManager: Previously, database-related monitors were not displayed in the AD tab even though data collection was successful. This issue has now been fixed.
  • OpManager: Previously, the exported PDF for the Server Health report did not display the start and end times when generated for a custom time period. This issue has now been fixed.
  • General: Previously, for European regional settings, the system calculated the week start as Sunday instead of Monday, resulting in an incorrect "This Week" time range calculation. This issue has now been fixed.
  • General: Previously, editing Advanced Reports failed in some cases in OpManager Plus Enterprise Edition. This issue has now been fixed.
  • OpManager: Previously, devices were removed from Central BV during EE sync when the Central BV user was synced to the Probe. This issue has now been fixed.
  • OpManager: Previously, IP addresses ending in zero were not added in OpManager by default, which caused an exception during SD-WAN device rediscovery. This issue has now been fixed.
  • OpManager: Previously, when a parent device came back up, the status of child devices that were already down was not updated correctly. This issue has now been fixed.
  • OpManager: Previously, the Meraki Organization Summary by Category widget encountered an out-of-memory issue when handling a large number of networks. This issue has now been fixed.
  • OpManager: Previously, counter resets were not excluded properly during interface polling due to a number format issue. This issue has now been fixed.
  • OpManager: Previously, Notification Profile and Workflow loading was slow when ServiceNow contained a high number of groups and technicians. This issue has now been fixed.
  • OpManager: Previously, the Workflow Service task triggered incidents even when Event Management was enabled in the ServiceNow configuration page. This issue has now been fixed.
  • OpManager: Previously, in Notification Profile and Workflow, the refresh option refreshed only custom fields and not default fields. This issue has now been fixed.
  • OpManager MSP: Previously, interfaces were not listed during interface group creation when the "All Probes" filter was selected in MSP Central. This issue has now been fixed.
  • OpManager MSP: Previously, the search filter in the Group Creation page did not work correctly due to an internal issue. This issue has now been fixed.

Build 12.8.733 - May 8, 2026

Issues Fixed

  • OpManager: Previously, in version 12.8.721, the Interface data collection was temporarily disrupted due to an internal issue. This has now been fixed.

Build 12.8.732 - May 8, 2026

Issues Fixed

  • General: Support IDs: 12513701, 11569302, 12269459 - Introduced a superuser privilege pre-check for remote PostgreSQL in PPM for builds below 128511.

Build 12.8.722 - May 21, 2026

Issues Fixed

  • General: Support IDs: 12513701, 11569302, 12269459 - Introduced a superuser privilege pre-check for remote PostgreSQL in PPM for builds below 128511.

Build 12.8.721 - April 30, 2026

New Features

  • General: Users can generate multiple API keys, with options to set module permissions or URL restrictions and an expiry date. They can also disable, enable, or regenerate the keys without losing configurations.
  • OpManager: Introduced support for Network Telemetry (gNMI) protocol, enabling continuous streaming data collection for network devices.

Enhancements

  • General: OpManager’s FIPS compliance has been upgraded from FIPS 140-2 to FIPS 140-3.
  • General: json jar has been upgraded to version 20251224.
  • General: The third-party Bouncy Castle JAR library has been upgraded to version 1.83.
  • General: Smart Upgrade is now supported in FIPS-enabled setups.
  • General: Introduced a dashboard filter to refine widget data based on group or time period for supported dashboards and widgets.

Issues Fixed

  • OpManager: Previously, alerts triggered for Hyper-V credential failures were not cleared after updating valid credentials. This issue has now been fixed.
  • OpManager MSP: Previously, the API to update VMware datastore monitor thresholds via the Quick Configuration Wizard in the MSP Central server was restricted. This has now been enabled.

Build 12.8.720 - April 22, 2026

New Features

  • OpUtils: Introduced support for superscope management within Microsoft DHCP servers.

Enhancements

  • General: The IPAM license supports DNS and DHCP monitoring, and the Management license enables full control, including DNS configuration, record management, DHCP reservations, scope policies, and MAC filtering.
  • Enterprise Edition: Users can now install a probe on the Probe Server for OpManager, OpManager Nexus, and Network Configuration Manager, directly from the Central UI.
  • OpManager MSP: A new “Groups” tab has been introduced on the Inventory page to improve usability.
  • OpManager Nexus: OpManager Plus has now been rebranded as OpManager Nexus.
  • NCM: Hardware Info Collector is now available to collect device hardware data daily at 6 AM or on demand.
  • OpUtils: Previously, BRIDGE-MIB was used for MAC address collection across all Extreme switches. This has now been enhanced for Extreme FabricEngine switches, where MAC addresses are collected using Q-BRIDGE-MIB.

Issues Fixed

  • OpManager: Groups created in MSP Central using the “All Probes” option were being synced across all customers. This issue has now been fixed.
  • Enterprise Edition: Previously, the device or interface properties updated in the Probe were causing issues in auto-updating the criteria-based Groups in Central. This issue has now been fixed.
  • OpUtils: The Switch Port Mapper report “Port by Operation Status Last Change Time” API (/oputilsreports/getPortsByOperationalStatus) was exposed as an external API. This issue has now been fixed.
  • OpUtils: Previously, in IP Address Manager, the Import IP Details feature did not support non-English characters. This issue has now been fixed.

Build 12.8.719 - April 13, 2026

New Features:

  • General: MCP Server support is now available, enabling MCP-compatible AI clients such as Claude Desktop, Visual Studio Code, and Cursor to access operational data.

Enhancements:

  • OpManager: Introduced Ollama as a third-party GenAI integration, allowing users to connect locally hosted LLMs via a Base URL to power summarization and script generation features.
  • OpManager: Introduced DeepSeek as a GenAI integration, allowing users to connect via an API Key to access summarization and script generation features.
  • OpManager: Added a default GenAI selection feature enabling users to set a preferred AI while adding or editing an integration, with a priority-based fallback order of OpenAI, DeepSeek, and Ollama when the default agent is reset or removed.

Issues Fixed:

  • OpManager: From 12.8.690, the access points list was not displayed under License Management → Manage Usage → Lite Devices. This issue has now been fixed.

Build 12.8.718 - April 09, 2026

Security Fixes:

  • General: A Remote Code Execution (RCE) vulnerability was identified in a third-party package and has been resolved.

Build 12.8.708 - April 21, 2026

Issues fixed:

  • General: A Remote Code Execution (RCE) vulnerability was identified in a third-party package and has been resolved.
  • General: In some cases, Log360 audit logs were not being forwarded after the service startup. This issue has now been resolved.
  • OpManager: From 128690, under LicenseManagement -> ManageUsage -> LiteDevices, the access points list was not displayed. This issue has now been resolved.

Build 12.8.707 - April 03, 2026

Enhancements:

  • OpManager: Users can now configure device downtime in bulk by uploading a CSV file containing IP addresses in the Device Downtime Scheduler.
  • OpManager: Hardware monitoring support has now been introduced for HP Aruba switches.
  • OpManager: Switch Stack monitoring is now supported for HPE Aruba AOS-CX devices.
  • OpManager: A new subtab "AppLogs" has been added under Applications tab, providing a centralized log monitoring capability in APM Plugin for collection, search, and analysis of application/server logs through a single dashboard.
  • OpManager: Henceforth, if the APM plug-in is enabled in OpManager, the user can add application monitors to the Business View in the Central server.
  • General: Support for ManageEngine Log360 integration has been introduced for NetFlow Analyzer and Firewall Analyzer. Users can now forward application audit and access logs to Log360.
  • General: Audit module events can now be forwarded to ManageEngine Log360.
  • OpManager: Default alarm rules have been refactored to support module-scoped configuration, allowing each rule to execute exclusively within its designated scope boundaries.
  • OpManager: The 'Suppress Alarms' configuration previously located under Monitor Settings → Hardware Sensor Metrics has migrated to 'Hardware Sensor Status → Default Alarm Rule for centralized control and consistency.
  • OpManager: The 'Alert on Hardware Change' configuration previously under Monitor Settings → Hardware Inventory Metrics has migrated into the Inventory Metrics' Default Alarm Rule Set for centralized control and consistency.
  • OpManager: New actions have been added to the Discovery Rule Engine, allowing users to suppress hardware sensors based on sensor name or sensor type.
  • OpManager: Introduced two new columns, Event Type and Previous Severity, in the Advanced Reports of the Alarms module. Both fields are also available as filter options for customized reporting.
  • OpManager: Forecast alerts now support Interface Rx and Tx utilization, along with their impact and recommendations in the Zia Insights dashboard.
  • OpManager: A new criteria field, "VirtualType" has been introduced for categorizing virtual devices when creating groups.
  • OpManager: Henceforth, VMware events will not be raised for VMs that are not monitored.
  • OpManager: VMware event severity classifications have been updated to include the Info level, in addition to the existing Attention, Trouble, and Clear categories.
  • OpManager: Introduced a Hypervisor Memory Utilization monitor for Nutanix VMs.
  • OpManager: vSan Inventory details can now be viewed on the vCenter Snapshot Page, when vSAN is available.
  • OpManager: The Monitoring Agents page under Settings in the ITOM Agents section now displays the agent’s current version along with the compatible agent versions.
  • OpManager: Introduced a VMware VM Snapshot Details widget in the VMware vCenter device snapshot, under the Virtual Details tab, and in the datastore snapshot pages.
  • OpManager: OpManager now supports syncing Wireless LAN Controller (WLC), Meraki, Cisco ACI, and SD-WAN relationships with ServiceDesk Plus On-Premises and ServiceDesk Plus Cloud.
  • OpManager: OpManager now syncs Switch Port Mapper relationships with ServiceDesk Plus Cloud.
  • OpManager: Custom field variables are now supported in the alarm messages.
  • OpUtils: Introduced a new API (/devices/{serialNumber}/clients) to collect end device MAC address from Cisco Meraki switches.

Security Fixes:

  • OpUtils: Previously, a stored XSS vulnerability was identified in Switch Port Mapper during the rendering of Switch Name, Interface Name, and VLAN Name. This issue has now been fixed. (ZVE-2026-0066, ZVE-2026-0204)

Issues fixed:

  • OpManager: Due to the EventLog Analyzer and Log360 products merge, an issue occurred in the OpManager-Log360 integration. This issue has now been fixed. For ManageEngine Log360 versions above 13000, OpManager version 128676 or later is required.
  • General: Previously, Monitoring Agent re-association did not fully clear existing agent–device mappings, leading to mismatched monitored data. This has now been resolved.
  • Enterprise Edition: Previously, an internal issue in Switch Stack discovery caused stale entries to be created, resulting in synchronization issues. This issue has now been fixed.
  • OpManager: Previously, member switch information for Extreme Switch Stacks could not be retrieved due to an internal issue. This has now been resolved.
  • OpManager: Previously, false-positive alerts were generated for MAC address changes. This has now been resolved.
  • OpManager: Previously, in rare scenarios, when multiple VMs within a Nutanix cluster shared the same IP address, Device mapping conflicts occurred. This issue has now been resolved.
  • OpManager: Previously, Out-of-Memory (OOM) errors occurred in rare cases, during VMware data collection for vSAN-related monitors. This issue has now been resolved.
  • OpManager: Previously, certain VM entities were omitted during Xen Discovery. This has now been fixed.
  • OpManager: Previously, Proxmox Rediscovery failed in some cases due to storage volume and disk entities updating. This has now been fixed.
  • OpManager: Previously, VMware Map caused OOM error in rare cases when being used in larger environments. This issue has been addressed by optimizing VMware Maps.
  • OpManager: Previously, high memory utilization issues were caused in vCenter in some cases of inventory update and data collection. This has now been optimized.
  • OpManager MSP: Previously, data synchronization between the Probe and Central was delayed as agent-related data was updating to Central every five minutes. This has now been fixed.
  • OpUtils: Previously, users with role-based access (Switch Port Mapper write permission only) were unable to modify Switch Port Mapper custom column values. This issue has now been fixed.
  • OpUtils: In Switch Port Mapper tree view, Cisco Meraki switches were added as duplicates when the same switch was already added using SNMP. This issue has now been fixed.
  • OpUtils: In Switch Port Mapper, there was an issue where duplicate MAC address alerts were triggered when a port was associated with multiple VLANs. This issue has now been fixed.
  • OpUtils: Previously, under IP Address Manager, in DHCP Servers tab, there was an issue with displaying the IP state for Cisco DHCP servers. This issue has now been fixed.
  • OpUtils: Previously, there was an issue where switch scanning was impacted due to IP history updates when MAC-to-IP mappings changed. This issue has now been fixed.
  • OpUtils: Previously, an Out of Memory (OOM) issue occurred during the generation of scheduled Excel reports. This issue has now been fixed.

Build 12.8.706 - March 31, 2026

Enhancements:

  • OpManager : The getLastCollectedValues API has been enhanced to include properties like ThresholdEnabled, Interval, PollingStatus, and DisplayName, in addition to the existing performance monitor response, enabling a more comprehensive view of monitor configurations.
  • NCM : Introduced a Bulk Remediation option in the policy result grid for violated rules.
  • NCM : Users can now stop an ongoing compliance check at any point during execution.
  • NCM : The selected remediation configlet content is now displayed under the corresponding flow rule violation item.
  • NCM : Vendor Name has been added as a field in the rule platform filter criteria. Additionally, Resource Name, IP Address, Serial Number, System Location, System Description, and System Contact have been added to the policy device criteria fields list.
  • NCM : Compliance checks triggered during backup will now be executed only when a configuration change is detected.

Issues Fixed:

  • NCM : Compliance formatter issues were observed across Inventory, Device Snapshot Overview, Device Snapshot Compliance tab, Network Status Report, and its PDF export. These issues have now been fixed.
  • General : Previously, while saving or regenerating the embed widget link, the slide closed automatically. This issue has now been fixed.

Build 12.8.705 - March 30, 2026

Enhancements:

  • General : PostgreSQL has been upgraded to version 14.22. The PostgreSQL vulnerability issues from 14.20 have been fixed now.
  • General : The Four-Node (DC-DR) Architecture for Failover has now been extended to Linux environment.
  • General : Introduced Preferred Master support for failover.
  • General : Apache Tomcat has been updated to enhance security.
  • General : Support for the Estonian language has been added.

Issues Fixed:

  • OpManager : Previously, in the Notification Profiles Triggered report, selecting the Devices option under the Filter icon caused the UI to freeze when a large number of devices were present. This issue has now been fixed.

Build 12.8.704 - March 20, 2026

New Features:

  • OpManager: From now on, the Management IP will be automatically fetched from OpManager and updated in the Flow Analysis module during SNMP association with the NetFlow Analyzer devices.
  • OpManager: Introduced DHCP Insights for DHCP servers to provide real-time visibility into DHCP transactions, client activity, failures, and response performance using DPI-enabled packet analysis via the Remote Collector.
  • OpManager: Introduced DNS Insights for DNS servers to provide real-time visibility into DNS queries, response patterns, errors, and resolution performance using DPI-enabled packet analysis via the Remote Collector.

Build 12.8.703 - March 17, 2026

New Features:

  • OpManager: OpManager now supports syncing downtime schedules from ServiceDesk Plus (on-premises) Change Requests, enabling unified and seamless planned maintenance across both platforms.
  • OpManager: OpManager now supports monitoring of VeloCloud SD-WAN, enabling real-time tracking of controllers, tunnels, WAN links, and overall network health.
  • OpManager: Support for ">=" and "<=" threshold conditions is now available for Performance Monitors, Packet Loss, Response time, Service Monitors, and Script Monitors.

Enhancements:

  • OpManager: Alarm severity for F5 virtual servers or pool members can now be lowered using a database query.
  • Enterprise Edition: Interface Severity Settings feature has now been added to OpManager Central, allowing configurations to be pushed to selected or all probes to standardize configuration across enterprise environments.
  • Enterprise Edition: Device Down Settings can now be configured from OpManager Central and pushed to selected or all probes, ensuring consistent configuration across the enterprise environments.
  • Enterprise Edition: Device Down Settings and Interface Threshold Settings can now be configured using groups synced from OpManager Central.
  • OpManager: A new option, Drop to Zero on Poll Failure, has been added under Graph Display Settings in Database Maintenance to drop the graph line to the baseline if polling fails, enabling visualization of poll failures.
  • OpUtils: Under security settings, file integrity support has been enhanced for OpUtils standalone.
  • OpUtils: All MAC addresses associated with a trunk port can now be viewed in the export file.
  • OpUtils: In Switch Port Mapper and its All Inventory page, support has been added to apply search filters to exported data.
  • OpUtils: Rogue Detection will now display the device names as configured in the Switch Port Mapper tree view.
  • OpUtils: In Switch Port Mapper, the maximum length of the IfAlias field has been increased from 100 to 255 characters.

Issues Fixed:

  • OpManager Storage Monitoring: Previously, there was an issue with the Dell EMC Data Domain storage template where the disk status did not match the actual state. This issue has now been fixed.
  • OpManager: Previously, when editing a scheduled Capacity Planning report, the selected rule filter, site filter, and renamed site were not retained in the generated report. This issue has now been fixed.
  • OpManager: Previously, an issue occurred in the Advanced Report while applying the Category filter for a long time. This issue has now been resolved.
  • Enterprise Edition: Previously, in OpManager Plus Central and OpManager Lite Central, applying the Probe Name filter for a specific probe in Advanced Reports caused the report to fail to generate data for that probe. This issue has now been fixed.
  • Enterprise Edition: Previously, in OpManager Plus Central, renaming a probe caused issues in the Central dashboard and while exporting the Advanced Report. This issue has now been fixed.
  • OpManager Storage Monitoring: Previously, the Synology spare disks were not categorized. This issue has now been fixed.
  • OpManager: Previously, in the default report, changing the language to Japanese caused a UI alignment issue in the report header. This issue has now been fixed.
  • OpManager: Previously, while exporting the Advanced Report, the latitude and longitude values were rounded off in the exported file. This issue has now been fixed.
  • OpManager: Previously, F5 pool members or virtual servers were missing from the inventory when multiple entries had similar names or IP addresses. This issue has now been fixed.
  • OpManager: Previously, when the device was added as UnManaged via Rule Engine, Hardware monitoring was not suspended. This issue has been fixed now.
  • OpManager: Previously, the active process tab was not shown for devices with the parent category set to desktop. This issue has now been fixed.
  • OpManager: Previously, there was an issue fetching the model of HP Aruba devices on the Device Summary page. This issue has now been fixed.
  • OpManager: Previously, there was slowness in listing URL Monitors. This issue has now been fixed.
  • OpManager: Previously, IPMI dell iDrac 10 was not added to the product due to API incompatibility. This issue has been fixed now.
  • OpManager: Previously, in certain scenarios, when new partition drives were discovered from the Device Template or Performance Monitor page, the monitoring interval was not updated correctly. This issue has been fixed.
  • OpManager: Previously, for Huawei IPMI devices, the values of the memory sensors were not displayed. This issue has been fixed now.
  • OpManager: Previously, the hardware manufacturer was wrongly updated for Cisco devices, resulting in raising unnecessary alerts. This issue has been fixed now.
  • OpManager: Previously, hardware alerts were raised incorrectly for Brocade temperature sensors due to default threshold values. This issue has been fixed now.
  • OpManager: Previously, from version 128595, there was an issue with displaying the Monitoring Forecast Trend for interface graphs. This issue has now been fixed.
  • OpManager: Previously, the Restart the service option in the Windows Service Monitor did not work properly when more than one service monitor was down during the same polling cycle. This issue has now been fixed.
  • OpManager: Previously, custom fields were being dissociated when searching for and associating a new field from the Custom Fields list view. This has been fixed now.
  • OpManager: Previously, the Process monitor and Availability report were exported as .xls format instead of .xlsx format. This issue have been fixed now.
  • OpManager: Previously, groups containing subgroups were skipped from the 'Availability, Health and Alarms Summary' widget filters. This issue has been fixed now.
  • OpManager: Out-of-Memory error occurred in a rare scenario during BGP data collection has been fixed now.
  • OpManager: Previously, the widgets in the VLAN snapshot page were duplicated due to an internal issue. This has now been fixed.
  • OpManager: Previously, when a parent device configured with uplink dependency went down, the child device displayed Downtime instead of Dependent Unavailable. This issue has now been fixed.
  • OpManager: Previously, in version 12.8.401, Performance Group data was not available in Advanced Reports. This has been fixed now.
  • OpManager: Previously, expander details for discovered HPA devices were listed under the controller monitor instance. This has been fixed now.
  • OpManager: Previously, aggregate utilization statistics for discovered NetApp ONTAP devices were reported incorrectly. This has been fixed now.
  • OpManager: Previously, Business View users with access to multiple Business Views containing the same devices received an Unauthorized error in Report Builder. This has been fixed now.
  • OpManager: Previously, there was an issue in the table navigation icon in the Custom Alarm View. This has been fixed now.
  • OpManager: Previously, custom fields were not updated during CSV discovery for Switch, UPS, Printer, and Domain Controller device categories. This has now been fixed.
  • OpUtils: Previously, Active Directory details added by an administrator could be accessed without authentication by users with IPAM access. This issue has been fixed now. (ZVE-2024-1132)
  • OpUtils: Previously, users with the Rogue-only role were unable to view the IP address and port details for MAC addresses in rogue detection. This issue has now been fixed.
  • OpUtils: Previously, there was a CLI timeout issue while fetching DHCP data from Fortinet devices due to incorrect pagination prompt handling in the CLI parser. This issue has now been fixed.
  • OpUtils: Previously, there was an issue with the bulk update for switches. This issue has now been resolved.
  • OpUtils: Previously, ARP collection for Cisco devices failed when CLI credentials included an enable username/password. This issue has now been fixed.
  • OpUtils: Previously, subnetworks discovered through DHCP were not included under the corresponding supernet. This issue has now been resolved.

Build 12.8.702 - March 06, 2026

Enhancements:

  • OpManager: Integrated the dompurify npm package for secure client-side HTML rendering, ensuring safe data display in the UI and protection against Cross-Site Scripting (XSS) attacks.
  • NCM: Now, the Velocity JAR has been upgraded from version 2.3 to 2.4.1.
  • NCM: In the Config Backup Schedule Report, a banner was not displayed for configuration-changed devices. A banner is now displayed.
  • NCM: Devices in the Config Backup Schedule Report are now sorted alphabetically.

Issues Fixed:

  • NCM: Previously, a stored XSS vulnerability was present in the Hostname field across the Device Snapshot, Enable Change Detection, Label Management Associate, Configuration Diff, Execute Configlet, Approval Request Details, Change Notification Associate, and Device SysOID Mapping pages. This issue has now been fixed.
  • NCM: Previously, low-privilege users were able to delete regex entries created by other users during bulk deletion if the selection included a regex they had created. This issue has now been fixed.
  • NCM: In the Add Credential Rule page, the Custom Column Criteria field displayed default column names even after modification. It now correctly reflects the latest saved custom column names.
  • NCM: Previously, users faced issues while navigating to the Configuration Snapshot page and deleting older configurations during cleanup when handling large configuration sizes. This issue has now been fixed.

Build 12.8.692 - April 08, 2026

Issues Fixed:

  • General : A Security Control Bypass vulnerability was identified in the Submit Query functionality due to improper query validation. This has now been fixed. (Reported by Fabius Watson).

Build 12.8.691 - February 27, 2026

New Features:

  • OpManager : Introduced an ML-based Security Analytics module, aligned with the MITRE ATT&CK framework, in OpManager, OpManager Plus, OpManager Enterprise Edition and OpManager Plus Enterprise Edition.

Build 12.8.690 - February 27, 2026

New Features:

  • General: From Version 128690, a new widget has been added to the Device Snapshot Page to display multiple interface IP addresses for SNMP-enabled devices.
  • OpManager: OpManager now supports monitoring of Celona Private 5G enterprise networks, enabling real-time visibility into 5G access points, edge nodes, and connected devices.
  • OpManager: Introduced an option to group application monitors for unified visibility.
  • OpManager Plus EE: The following new widgets are now supported: WLC, TopN Storage, SLA, SD-WAN, SDN, real-time, Nutanix, Meraki, capacity planning, VM, and process monitor widgets.
  • OpUtils: Users can now discover the subnet and ARP from Arista devices using CLI-based discovery.
  • OpUtils: Under DHCP Servers, users can now add and monitor non-AD Microsoft DHCP Servers.
  • OpUtils: Added a new Discovery Source column under Subnet Details to help users identify how the subnet was discovered.
  • OpUtils: Introduced a new API (fvCEp) to collect end device MAC address from ACI switches.

Enhancements:

  • General: PostgreSQL JDBC Driver has been upgraded to version 42.7.8, addressing and resolving the security vulnerabilities identified in version 42.7.3.
  • General: Access control for the Jira Cloud “Log a Ticket” option has been enhanced. It is now accessible only to Super Admin users.
  • OpManager: Users can now view the application monitors associated with the servers in the Organization Map.
  • OpManager: Application groups are now supported in Alarm Correlation Rules.
  • OpManager: Advanced Reports are now supported for Hardware Metrics.
  • OpManager: The ‘Log a Ticket’ field names in Japanese for ServiceDesk Plus (on-premises) under OpManager Notification Profile, Notification Template, and Workflow have been updated to align with the corresponding field names in ServiceDesk Plus (on-premises).
  • OpUtils: Introduced customizable port number and timeout fields for Fortinet, Palo Alto, and Cisco DHCP, along with router CLI credentials.
  • OpUtils: In Switch Port Manager, added a KB link on the Port Details page explaining why MAC addresses are not displayed for Cisco SNMP V3 switches.
  • OpUtils: In Router Details page, added a new column for Arp Count.
  • OpUtils: Duplex value is now also collected from the new OID .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.14 for Huawei switches.
  • OpUtils: In the central UI, the status of the subnet and switch scan (scanned, scanning in progress) updates automatically without refreshing the page.

Issues Fixed:

  • General: Previously, in rare scenarios, the upgrade process was halted due to a false health check failure caused by a case-sensitive comparison of the installation path. This issue has now been fixed.
  • General: Previously, Tomcat's default error page appeared instead of the application's custom error page when an invalid resource was accessed without a proper session. This issue has now been fixed.
  • OpManager: An issue that caused failures during Downtime Schedule edit and delete operations in certain MSSQL database environments due to database constraint conflicts was observed. This issue has now been fixed.
  • OpManager: Previously, there was a startup issue in the APM Plugin due to an unsupported language sync from OpManager. This issue has now been fixed.
  • OpManager: From version 12.8.540, interface threshold failure alarms were transitioning between the configured severities even when the recorded value continued to violate the Critical threshold. This issue has now been fixed.
  • OpManager: Previously, ServiceNow could not communicate with OpManager, even when the MID Server was configured in OpManager, for ServiceNow versions “Yokohama” and above due to a deprecated component in ServiceNow. This issue has now been resolved.
  • OpManager: From version 12.8.665, an issue in the "Run Program" and "Run System Command" notification profiles caused profile trigger failures. This issue has now been fixed.
  • OpManager MSP: Previously, the Monitoring Agent Down criterion was not displayed under Notification Profiles in MSP Central. This issue has now been fixed.
  • OpManager MSP: From build 128689, a snapshot loading issue was observed in MSP Central. This issue has now been fixed.
  • OpManager MSP: Previously, there was an issue in creating Business View when the "All probes" filter was selected. This issue has now been fixed.
  • General: Previously, there was an issue in ServiceDesk Plus and ServiceDesk MSP where request creation failed when the same devices were associated with multiple notification profiles with identical criteria. This issue has now been resolved.
  • OpUtils: Previously, the Subnet Snapshot Summary page did not automatically update the subnet scan status after completion. This issue has now been fixed.
  • OpUtils: Previously, there was an issue that prevented IP address reservation on the Microsoft DHCP server. This issue has now been fixed.
  • OpUtils: Previously, in the IP Details page, there was an issue displaying the details of the logged-on users. This issue has now been resolved.
  • OpUtils: Previously, there was an issue with fetching DNS record data for record types other than A, AAAA, CNAME, PTR, MX, SOA, and NS. This issue has now been resolved.
  • OpUtils: Previously, from version 12.8.656, the switch scan for SNMP v3 switches experienced a delay. This issue has now been fixed.
  • OpUtils: Previously, there was an issue with discovering subnets from the ipAddr Table of RFC1213-MIB. This issue has now been fixed.
  • OpUtils: Previously, users were unable to view all devices under Settings -> OpUtils -> Router page. This issue has now been fixed.
  • OpUtils: Previously, the Fortinet DHCP scan failed due to parsing of excluded IP addresses. This issue has now been fixed.

Build 12.8.689 - February 11, 2026

New Features:

  • OpManager: Custom SNMP monitors now support new functional expressions such as Replace Using Regex, Remove N Chars from Start, Round Up, and Parse Number From String for advanced OID response processing.
  • OpManager: Added a new Custom Output Processor option in Custom SNMP monitors to define, customize, and interpret OID responses in addition to the existing functional expressions.
  • OpManager: Added support for monitoring SNMP tabular OIDs through Custom SNMP monitors, providing unified table views, interactive widgets, and detailed reports for correlating device metrics.
  • OpManager: Users can now suppress any type of monitor alarms in the workflow alarm suppression task.
  • Enterprise Edition: OpManager now supports syncing relationships in Organization Map (Uplink Dependency, Virtualization, and ADDM modules) from central with ServiceDesk Plus Cloud.
  • Enterprise Edition: Users can now perform device and interface actions from the Central inventory page.
  • Enterprise Edition: Inventory actions have now been introduced in the Central server Quick Configuration Wizard to support bulk operations.

Enhancements:

  • OpManager: Previously, the To Email Address field in alarm escalation was limited to a total length of 150 characters. This limit has now been increased to 250 characters.

Issues Fixed:

  • General: The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on March 26, 2026.
  • OpManager: The URL response delay observed from OpManager Version 128525 during 1-minute polling interval has been resolved.
  • OpManager: Previously, NTLM Authentication for URL Monitoring was not working from OpManager Version 128525 due to a username format issue. This has been fixed now.
  • OpManager: Previously, URL Monitoring was not working for URLs with certain query parameters. This issue has been resolved.
  • OpManager: Previously, an Out of Memory (OOM) issue occurred because BGP polling tasks would accumulate when SNMP responses were delayed. This has now been fixed.
  • OpManager: Previously, an ID discrepancy issue occurred when a database restore was performed in the Enterprise Edition. This issue has now been fixed.
  • OpManager: FortiGate WLC discovery failures caused by an internal issue have now been fixed.
  • OpManager: Rogue SSIDs were not persisted during WLC discovery due to a BCP utility issue. This has been fixed.
  • OpManager: Previously, there was a redirection issue when navigating to the rack from the 3D Rack & Floor view. This issue has now been fixed.
  • OpManager: Previously, users with Read-Only scope were unable to access the Map view on the group snapshot page. This issue has now been fixed.
  • Enterprise Edition: During upgrades from builds earlier than 128581, the upgrade may fail on probe installations using a remote PostgreSQL database if Downtime Schedules were configured before the upgrade.

Build 12.8.679 - February 25, 2026

Issues Fixed:

  • General : The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on March 26, 2026.
  • OpManager: Previously, an ID discrepancy issue occurred when a database restore was performed in the Enterprise Edition. This issue has now been fixed.
  • OpManager: Previously, an Out of Memory (OOM) issue occurred because BGP polling tasks would accumulate when SNMP responses were delayed. This has now been fixed.
  • OpUtils: Previously, there was an issue that prevented IP address reservation on the Microsoft DHCP server. This issue has now been fixed.
  • Enterprise Edition: During upgrades from builds earlier than 128581, the upgrade may fail on probe installations using a remote PostgreSQL database if Downtime Schedules were configured before the upgrade.

Build 12.8.678 - February 03, 2026

Enhancements:

  • General : Apache Tomcat has been updated to enhance security.
  • General : Apache Commons Text has been upgraded to version 1.15.0.
  • General : 7-Zip has been upgraded from version 24.09 to 25.01.
  • General : The MSSQL JDBC driver has been updated to enhance security.
  • NetFlow : Support ID: 11004258 – Introduced a new option in the Reports Settings page to manage the visibility of percentile information.
  • NCM: In Export Configuration, support for the SMB protocol has been discontinued from the latest version.
  • NCM: Upgraded commons-vfs jar to version 2.10.0

Issues Fixed:

  • General : Jakarta Mail jar has been upgraded to Version 2.0.5. The vulnerability issues from 2.0.3 have now been fixed.
  • General : Previously, in version 128665 and above, an Out of Memory (OOM) issue was observed in the QueryLogger component. This issue has now been fixed.
  • NetFlow : Support ID: 12458525 – The issue affecting the Flow Rate graph (Support → System Performance → System Info → NFA Flow Rate Stats) has been fixed now.
  • NetFlow : Support ID: 12570512 – The Windows DHCP syslog parsing issue has been fixed now.
  • NetFlow : Support ID: 12526212 – The probe and central server connection lost alert mail content has been updated.
  • NetFlow : Support ID: 12518458 – The login timeout limitation for BCP has been fixed now with the introduction of a new system property.
  • NetFlow : Support ID: 12447450 – The issue with custom time period selection via the traffic zoom graph in NetFlow Analyzer Enterprise Edition in Central has been fixed now.
  • NetFlow : The data loading issue in the device-src-network tab when Auto CIDR is enabled has been fixed now.
  • NetFlow : The time zone mismatch issue in Trend and Compare reports has been fixed now.
  • NetFlow : Performance issue from version 128611 due to Raw Cleanup process has been fixed now.

Build 12.8.677 - January 28, 2026

Enhancements:

  • OpManager: The Ember.js version used for the Reports and Applications tabs has been upgraded to 6.4.
  • NCM: The Ember.js version used for the Reports tab has been upgraded to 6.4.

New Features:

  • OpUtils: IP Address Manager now supports Infoblox DHCP server monitoring and subnet discovery.

Build 12.8.676 - January 14, 2026

Enhancements:

  • OpManager: OpManager now supports monitoring of VMware VM snapshots with real-time visibility into snapshot age and size. Users can also configure alerts based on age or size thresholds to manage snapshot growth and performance.

Build 12.8.667 - April 21, 2026

Issues Fixed:

  • General: The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on March 26, 2026.
  • General: Previously, in rare scenarios, the upgrade process was halted due to a false health check failure caused by deleted duplicate entries of the Network Packet Sensor in the database. This issue has now been fixed.
  • General: A Security Control Bypass vulnerability was identified in the Submit Query functionality due to improper query validation. This has now been fixed. (Reported by Fabius Watson).
  • General: A Remote Code Execution (RCE) vulnerability was identified in a third-party package and has been resolved.
  • Enterprise Edition: During upgrades from builds earlier than 128581, the upgrade may fail on probe installations using a remote PostgreSQL database if Downtime Schedules were configured before the upgrade.
  • OpManager: Previously, interface alarm suppression was not working in the Central inventory. This has now been fixed.
  • OpManager: Previously, custom fields were not updated during CSV discovery for Switch, UPS, Printer, and Domain Controller device categories. This has now been fixed.
  • OpManager: Previously, the HeatMap widget experienced performance issues due to query processing. This issue has now been fixed.
  • OpManager: Previously, monitor failure alerts in the Data Collection Manager were triggered before reaching the configured number of consecutive failures due to incorrect failure count increment and reset behavior. This issue has now been fixed.
  • OpManager: From version 12.8.540, interface threshold failure alarms were transitioning between the configured severities, even when the recorded value continued to violate the Critical threshold. This has been fixed now.
  • OpManager: Previously, false-positive alerts were generated for MAC address changes. This has now been resolved.
  • OpManager: Previously, an Out of Memory (OOM) issue occurred because BGP polling tasks would accumulate when SNMP responses were delayed. This has now been fixed.
  • OpManager: An issue that caused failures during Downtime Schedule edit and delete operations in certain MSSQL database environments due to database constraint conflicts was observed. This issue has now been fixed.
  • OpManager: From version 12.8.665, an issue in the "Run Program" and "Run System Command" notification profiles caused profile trigger failures. This issue has now been fixed.
  • OpUtils: Previously, there was an issue that prevented IP address reservation on the Microsoft DHCP server. This issue has now been fixed.
  • OpUtils: Previously, from version 12.8.656, the switch scan for SNMP v3 switches experienced a delay. This issue has now been fixed.
  • OpUtils: Previously, there was an issue where switch scanning was impacted due to IP history updates when MAC-to-IP mappings changed. This issue has now been fixed.
  • OpUtils: Previously, an Out of Memory (OOM) issue occurred during the generation of scheduled Excel reports. This issue has now been fixed.
  • OpUtils: Previously, Cisco Meraki switches were added to the Switch Port Mapper even when the “Add to SPM” option was disabled in OpManager, due to a license limit being exceeded. This issue has now been fixed.

Build 12.8.666 - February 06, 2026

Issues Fixed:

  • General: Previously, in version 128665, an Out of Memory (OOM) issue was observed in the QueryLogger component. This issue has now been fixed.
  • General: Previously, in certain scenarios, the tray icon was not stopped during the upgrade process, which resulted in upgrade failures. This issue has now been fixed.
  • OpManager: Previously, an ID discrepancy issue occurred when a database restore was performed in the Enterprise Edition. This issue has now been fixed.

Build 12.8.665- January 09, 2026

New Features:

  • General: Introducing support for KingbaseES database.
  • OpManager: OpManager now integrates with OpenAI to deliver contextual summaries for alerts, device and device group details, as well as generate scripts based on natural language inputs.
  • OpManager: OpManager now integrates with iLert, which helps reduce alert noise and improve system reliability through centralized alarm management.
  • Enterprise Edition: Centralized configuration has been enhanced under Enterprise Settings to enable or disable module-specific automatic synchronization from the Central server to all probes.
  • OpManager: OpManager now offers enhanced accessibility by supporting WCAG (Web Content Accessibility Guidelines) standards.
  • OpManager: Users can create duplicate groups using the 'Copy As' option in the groups list view page.
  • OpManager: Around 300 device templates have been added for wider support of device models during device discovery.
  • OpManager: Previously, only Advanced and a few Default Reports were available in Lite Mode setups. All Default Reports have now been enabled in the Lite Central Edition.
  • OpManager: The Business View page has been redesigned for enhanced user experience with additional customization options.
  • OpManager: Business Views can now be exported in SVG format for better visualization.
  • OpManager: Link status can now be customized to display either overall health or traffic load for each Business View.
  • OpManager: Users can now choose to show either availability or overall health status for devices in the Business View widget.
  • OpManager: Users can now add shapes, peripherals, and text to Business Views and create L-shaped lines or links between them.

Enhancements:

  • General: From Version 12.8.662, any new NOC view created from a dashboard will inherit the widget order and width from the source dashboard.
  • General: From Version 12.8.662, widget positions and layout in Custom Dashboards configured by the dashboard owner will be inherited by shared users until they manually customize and save their own layout.
  • General: From Version 12.8.662, users with Write permission for Dashboards (including Operator type users) can now customize dashboard widget size and position.
  • General: Added support for opening links in dashboard widgets in a new tab via right-click. This feature is currently available in select widgets.
  • OpManager: Graphical Reports and Widgets are now supported for Hardware Monitors.
  • OpManager: OpManager now generates alerts for Windows and Linux devices that enter a hung state, detected through monitor data-collection failures. This feature can be enabled via Settings → Configuration → Alarm Rules → Default Alarm Rules.
  • OpManager: A new option has been introduced in the Interface Snapshot page to view the groups associated with the selected interface.
  • OpManager: An Add To Group option has been provided in the device and interface snapshot pages.
  • OpManager: A new criterion, Device group name, has been added to the interface group creation page.
  • OpManager: An option has been introduced to automatically update interface indexes during data collection when changes are detected in the environment.
  • OpManager: In addition to devices, WANIP and WANIP Site monitors can now be selected as parent dependencies for uplink status calculation.
  • OpManager: You can now configure uplink dependencies using device groups, enabling bulk management and simplified monitoring rules.
  • OpManager: A new global configuration is available to trigger an alarm only after a WANIP monitor is down for a user-defined number of consecutive checks, reducing false positives.
  • Enterprise Edition: The Suppress Alarm functionality is now available in the Downtime Scheduler on the Central Server.
  • OpManager: Users can now suppress any type of monitor alarms for multiple devices and configure recurring suppression schedules from the Downtime Scheduler page.
  • OpManager: Users can now suppress any type of monitor alarms for bulk devices directly through the Discovery Rule Engine.
  • OpManager: Users can now suppress Syslog and SNMP Trap alarms directly through the Discovery Rule Engine.
  • OpManager: A new page has been added under Settings → Configuration → Alarm Suppression, where Full Access Admin users can view all configured suppressions.
  • OpManager: Business Hour and Exclude Weekends options have been introduced in the OpManager mobile application.
  • OpManager Storage Monitoring: Monitoring NetApp cluster devices via REST API is now supported.
  • OpManager: Introducing the Applications Performance Metrics widget, which visualizes monitored data from selected Applications Monitors in multiple graphical formats.
  • OpManager: Network Paths, WAN IPs, WAN Links, Sites, and Probes can now be associated with Notification Profiles.
  • OpManager: Users with write permissions for the Downtime Scheduler can now create and edit downtime schedules.
  • OpManager: Network Paths, WAN IPs, WAN Links, Sites, and Probes can now be associated with Notification Profiles.
  • OpManager: Users with write permissions for the Downtime Scheduler can now create and edit downtime schedules.
  • OpManager MSP: Groups can now be created in Central with devices or interfaces across probes.
  • Enterprise Edition: A new criterion, Probe Name, has been added to the device and interface group creation page in Central.
  • Enterprise Edition: OpManager now integrates with ServiceDesk Plus MSP Cloud for seamless CI synchronization and improved CMDB accuracy.
  • OpUtils: Switch Port Mapper now includes an option to disable VLAN data collection via Cisco-VTP-MIB for Cisco switches.
  • OpUtils: In Switch Port Mapper, users can now disable ARP details collection across all switches.
  • OpUtils: IP Address Manager has been enhanced with the ability to discover subnets from the ipCidrRouteDest entry of the IP-FORWARD-MIB.
  • OpUtils: In the Switch Summary page, new properties such as Model, Serial Number, and OS Version have been added.
  • OpUtils: Introduced the Poll Using option, allowing switches to be polled using either the IP address or DNS name.
  • NetFlow: Support IDs #770650, #774295, #713198, #804661, #825910, #831091 – MAC address is now supported in Aggregate Data (Inventory Report) based on System Property.
  • NetFlow: SmartUpgrade and Emergency Patch capabilities are now supported in the NetFlow Analyzer Enterprise Edition.
  • NetFlow: Support for push notifications has been added to the NetFlow Analyzer mobile application.
  • NetFlow: Business Hour and Exclude Weekends options have been introduced in the NetFlow Analyzer mobile application.
  • NCM: ComplianceIQ now supports creating flow rules using XPath for compliance checks on XML-based device configurations.
  • NCM: New CIS standard policies are now supported, including CIS Cisco NX-OS v1.2.0, CIS Palo Alto Firewall 11 v1.2.0, and CIS Juniper OS v2.1.0.
  • NCM: Compliance report exports in CSV and XLS formats now include additional columns for Violation Message and Violation Severity.
  • NCM: Compliance checks can now be scheduled for individual policies.
  • NCM: Violated blocks and their corresponding content are now included in compliance reports, providing deeper insights into non-compliant areas.
  • NCM: Introducing ComplianceIQ, a revamped compliance module that enables configuring rules with complex if-else conditions and loop chains for advanced and flexible rule workflows.
  • NCM: Dynamic rule variables can now be used in remediation configlets and violation messages, enabling tailored notifications and automated remediations.
  • NCM: New policy bundles are now supported, including CIS_Cisco_ASA_9_x_Firewall, STIG_Cisco_ASA_NDM_v2, CIS_Fortigate_7_0_x_Policy_v1_3_0, CIS_Cisco_Firewall_v4_1_0, CIS_Cisco_IOS_16_v2_0_0, and CIS_Cisco_IOS_XR_7_x_v1_0_0.
  • NCM: Export and import options are now available for policies, rule groups, and rules to simplify policy sharing.
  • NCM: Compliance checks can now be performed on offline content, allowing validation against non-live device configurations.
  • NCM: Device properties can now be validated within compliance rules, enabling the use of device-specific attributes during evaluation.
  • NCM: Cisco Prime policies exported as XML files can now be imported into NCM, improving compatibility and simplifying policy integration.
  • NCM: In Network Configuration Manager Enterprise Edition, the Compliance feature is now available on the Central Server, enabling centralized compliance management across probes.
  • NCM: Compliance checks can now be performed using device command outputs, allowing validation beyond startup and running configurations.
  • NCM: The policy structure has been revamped with a consolidated, tree-like view to simplify navigation and enhance compliance rule management.
  • Firewall: Support ID 11226174 – Rule-Expiry scheduled reports now support Excel and CSV export formats in addition to PDF.
  • Firewall: Support ID 11226174 – A new option to view rules expiring within N days has been added to the Rule-Expiry reports section.
  • Firewall: Support ID 11226174 – Complete details of expired rule configurations are now included in email notification content.
  • Firewall: Support ID 11519591 – Policy fine-tuning reports can now be generated for multiple rules simultaneously, with on-demand export options available in CSV, XLS, and PDF formats.
  • Firewall: Push notifications have been enabled in the Firewall Analyzer mobile application.
  • Firewall: Business Hours filtering and Exclude Weekends options are now available in the mobile application.
  • Firewall: Support ID 11339464 – Firewall Analyzer now supports extended-style configuration files for MGuard firewalls in both Rule Management and Compliance reports, in addition to plain-style configuration files.

Issues Fixed :

  • General: Previously, a DOM-based XSS vulnerability was identified due to improper handling of message data in HTML. This issue has now been fixed. (Reported by Daniel Santos)
  • General: Previously, upgrades from base version 12.8.586 or higher were blocked at the precheck phase due to a scheduler-initiated Database Analyzer operation in certain scenarios. This issue has now been fixed.
  • General: PostgreSQL has been upgraded to version 14.20, addressing vulnerability issues present in version 14.19.
  • General: Previously, when embedding Widget or NOC views, users experienced login failures while accessing the Device Snapshot page. This issue has now been fixed.
  • General: Previously, there was an issue fetching groups under Notification Profile → Log a Ticket for ServiceDesk Plus MSP versions 14850, 14940, and above due to the deprecation of the V1 API. This issue has now been fixed by supporting the V3 API. Please refer to the compatibility document.
  • General: Previously, configuring Microsoft Teams integration and sending messages failed due to internal changes in the OAuthProvider framework from OpManager version 128624. This issue has now been resolved.
  • General: Previously, in certain cases after upgrading to version 128607 or above, file synchronization failed in failover services, resulting in secondary service startup failure. This issue has now been fixed.
  • OpManager: Previously, the Notification Profile edit window loaded slowly when multiple process templates were configured. This issue has now been fixed.
  • OpManager: Previously, a Command Line Injection vulnerability was detected in the Notification Profiles module. This issue has now been fixed. (Reported by Daniel Santos)
  • OpManager: Previously, in Report Builder interface graphs, consolidated table values were displayed in bytes instead of properly formatted speed units. This issue has now been fixed.
  • OpManager: Previously, in the Device Snapshot page, BGP Peers Summary widget graphs failed to export as PDF. This issue has now been fixed.
  • OpManager: Special characters in device or interface display names are now automatically sanitized and replaced with a hyphen (-) to prevent vulnerability issues.
  • OpManager: Previously, the Storage Growth Trend report could not be generated due to missing data points. This issue has now been fixed.
  • OpManager: Previously, an error occurred while viewing or generating scheduled advanced reports in Azure DB instances. This issue has now been fixed.
  • OpManager: In version 128581, NCM-related fields Backup Status and Policy Compliance were displayed incorrectly in the Device Snapshot page. This issue has now been resolved.
  • OpManager: Previously, while associating Custom SNMP monitors, display names were not mapped correctly when DNS was not resolved. This issue has now been fixed.
  • OpManager: Previously, there was an issue fetching the MAC address for certain SNMP devices on the Device Summary page. This issue has now been fixed.
  • OpManager: Previously, in the IPMI Device Snapshot page, there was a redirection issue in the Managing Servers widget. This issue has now been fixed.
  • OpManager: Previously, expanding the Traffic widget under WAN IP Snapshot → Traffic displayed no data in the Summary table. This issue has now been fixed.
  • OpManager: Previously, the Availability dial in snapshot pages did not display data for longer time periods. This issue has now been resolved.
  • OpManager Storage Monitoring: Previously, discrepancies were observed in performance monitor data for Dell Compellent and PowerStore storage devices. This issue has now been fixed.
  • OpManager Storage Monitoring: Previously, host and volume mappings for PowerStore devices were not updated correctly. This issue has now been fixed.
  • OpManager Storage Monitoring: Previously, the disk count for EqualLogic devices was displayed incorrectly. This issue has now been fixed.
  • OpManager Storage Monitoring: Previously, there was an issue during the discovery of NetApp E-Series storage devices. This issue has now been fixed.
  • OpManager Storage Monitoring: Previously, there was an issue with SNMPv3 credentials during status polling of Synology DSM storage devices. This issue has now been fixed.
  • OpManager Storage Monitoring: Previously, the disk online status of NetApp ONTAP storage devices was displayed incorrectly. This issue has now been fixed.
  • OpManager: An XSS vulnerability detected in the Heatmap widget when enabling 'Show label' has now been fixed. (Reported by Daniel Santos)
  • OpManager: Previously, from version 128540, suppression data was fetched in the listDevices and listInterfaces APIs even when the Suppressed column was not selected in the Inventory page column chooser. This issue has now been fixed.
  • OpManager: Previously, Windows Service Down alerts were triggered incorrectly when WMI query execution failed for Windows Agent–monitored devices. This issue has now been resolved.
  • OpManager: Previously, the Windows Agent stopped working during interface data collection when 64-bit–based data was received. This issue has now been fixed.
  • OpManager: Previously, from version 128455, the listDevices API experienced latency when Custom Fields from OpUtils were enabled in the Column Chooser. This issue has now been fixed.
  • OpManager: Previously, EventLog Monitors associated with unmanaged devices initiated polling after server restarts. This issue has now been fixed.
  • OpManager: Previously, when the OpManager UI was accessed from a different time zone, performance monitor graphs displayed incorrect values for custom time periods. This issue has now been fixed.
  • OpManager: Previously, in rare cases, the SNMPv3 handshake failed to initialize, causing data collection failures on firewall devices. This issue has now been fixed.
  • OpManager: Previously, false SNMPv3 alerts were generated by the Data Collection Manager due to excessive SNMP requests. This issue has now been fixed.
  • OpManager: Previously, intermittent data collection failures occurred due to SNMPv3 cache errors. This issue has now been fixed.
  • OpManager: Previously, IP address changes made in a probe did not sync to Central if another probe had assigned the same IP to a device. This issue has now been fixed.
  • OpManager: Previously, applying a Device Template dissociated the Performance Monitor linked to the custom field Serial Number. This issue has now been fixed.
  • OpManager: Previously, Rx/Tx traffic data was not collected for Palo Alto VPN tunnels. This issue has now been fixed.
  • OpManager: Previously, when ServiceDesk Plus On-Premise was integrated with OpManager, child CI type devices under Servers or Workstations failed to sync. This issue has now been fixed.
  • OpManager: Previously, when ServiceDesk Plus On-Premise was integrated with OpManager, OS versions failed to sync. This issue has now been fixed.
  • OpManager: Previously, in certain cases, an out-of-memory issue occurred when ServiceNow was configured in OpManager. This issue has now been fixed.
  • OpManager: Previously, from version 128582, alarm notes text overlapped on the Alarms List page. This issue has now been fixed.
  • OpManager: Previously, slowness was observed while accessing the Inventory tab due to an issue fetching the applications count. This issue has now been fixed.
  • OpManager: Previously, there was a discrepancy between the VPN Tunnels Down widget and VPN tab data in the Device Snapshot page. This issue has now been fixed.
  • OpManager: Previously, stale entries were added due to an internal issue in the scheduled interface discovery process. This issue has now been fixed.
  • OpManager: Previously, rediscovering a device without interfaces deleted packet loss and response time statistics. This issue has now been fixed.
  • OpManager: Previously, adding a Huawei AC 6508 controller triggered a WLC model mismatch error. This issue has now been fixed.
  • OpManager: Previously, WLC discovery fetched incorrect models due to improper SysOID evaluation when a default device template was missing. This issue has now been fixed.
  • OpManager: Previously, tooltips did not appear on the Google Map page when multiple devices were located at the same coordinates. This issue has now been fixed.
  • OpManager: Previously, when importing custom fields via CSV, some column values were not updated for certain devices due to an internal issue. This has now been fixed.
  • OpManager: Previously, the device down reason was not visible in the down event once the device came back up. This issue has now been fixed.
  • OpManager: Some devices failed to sync to ServiceDesk Plus On-Premise when the total number of devices exceeded 1,000. This issue has now been fixed.
  • OpManager: Previously, there was an issue syncing devices to ServiceDesk Plus MSP under categories that contained spaces in their names. This has now been fixed.
  • OpManager: Previously, in the Device Snapshot page, the IP address of EIGRP neighbors was garbled in the Neighbor Details widget. This issue has now been fixed.
  • OpManager: In the Interface Rediscovery page under Device Snapshot, unselected interfaces appeared selected when navigating to the next page. This issue has now been fixed.
  • OpManager: Previously, when multiple monitors were edited from the Device Template → Edit Threshold page, changes were applied only to the last edited monitor. This issue has now been fixed.
  • OpManager: From version 128610, interface alarms were not listed in alarm widgets when a device group containing interface alarms was selected. This issue has now been fixed for the following widgets: All Alarms, Recent Alarms, Unacknowledged Alarms, Recent Events, and Web Alarms.
  • OpManager: Users can now suppress alarms for VMware host physical NICs and storage adapters directly from the ESX Device Snapshot page.
  • OpManager: Real-Time Chart Rendering Mode now defaults to SVG for all real-time charts, and switching back to Image mode is no longer available.
  • OpManager: Previously, from version 128539, users experienced a delay while loading a switch snapshot page. This issue has now been fixed.
  • OpManager: Default Report schedules failed to generate from version 12.8.628. This issue has now been resolved.
  • OpManager: Users with administrator role and Business View scope can now update device properties and add or update links and icons in the Business View.
  • OpManager: Automated periodic updates are now handled for RAM capacity and HDD disk size details on agent-based Windows devices.
  • OpManager: Fixed an issue that caused incorrect File Integrity failure alerts during Script Monitor data collection on Windows monitoring agents.
  • OpManager: Resolved an issue where an incorrect domain name was displayed on Huawei Cloud (OpenStack) Windows agent-based servers.
  • OpManager: Previously, device backup failed in Network Configuration Manager when the same device was added in OpUtils Router for ARP collection. This issue has now been resolved.
  • OpManager: Previously, an out-of-memory issue occurred while loading switch details in the organization map. This issue has now been resolved.
  • OpManager: The Display Name from the OpManager device inventory is now synced with Switch Port Mapper, improving device identification.
  • OpManager: Windows Monitoring Agent has been enhanced with updated PCRE libraries to improve security compliance.
  • OpManager: Agent-based Windows devices now support up to 10 Script Monitors.
  • OpManager: The Compliance module has been relocated from the Settings page to the Config Mgmt section in OpManager and OpManager Plus.
  • Enterprise Edition: Previously, when manual thresholds were set in Central, adaptive thresholds for CPU and Memory monitors were still retained on newly installed probes. This issue has now been fixed.
  • Enterprise Edition: Previously, during enterprise upgrades via Settings → Upgrade Manager Settings, service pack transfers to probe services occasionally failed when service packs for both OpManager and the AppManager Plugin were uploaded. This issue has now been fixed and will take effect during the next service pack upload.
  • Enterprise Edition: From version 128625, certain Discovery Settings options did not update in Central. This issue has now been fixed for Discover Devices via Trap, Discovery Progress Notification, Use DNS as Display Name, Unique System DisplayName, and Restrict device sync from Add-on.
  • NCM: Previously, there were issues while updating the DNS name. This issue has now been fixed.
  • NCM: Previously, there was a sync issue between Probe and Central with the Database Cleanup Schedule on config versions. This issue has now been fixed.
  • NCM: The Configuration Analysis Report generated using Nipper has been removed and is no longer supported. The option to configure the Nipper installation directory has also been removed.
  • NCM: Previously, exporting compliance reports to CSV and XLS formats failed due to an internal issue. This has now been fixed.
  • NCM: Previously, an error occurred when selecting a device or device group during schedule creation or configlet execution if the selected language was other than English. This issue has now been fixed.
  • NCM: An option has been introduced in client-server settings to disable Compliance Check during configuration backup.
  • NCM: Previously, changes made to configlets were reverted after applying a PPM. This issue has now been fixed.
  • NCM: Previously, dashboard pie charts did not hide hover content after drill-down. This issue has now been fixed.
  • NCM: Compliance results are now marked as ATTENTION, with the failure reason displayed directly in the results, replacing the previous alarm trigger behavior.
  • NCM: In Network Configuration Manager Enterprise Edition, distributed device groups can no longer be edited or deleted from within a probe.
  • NCM: Support for several APIs has been discontinued, including /ncmconfig/exeComplianceCheck, /ncmcompliance/copyRule, /ncmcompliance/associateRuleGroup, /ncmcompliance/getAssocaitedPolicy, /ncmcompliance/getAssocaitedRuleGroup, /ncmcompliance/getPolicyDistribution, /ncmcompliance/getPolicyAdhocResult, /ncmcompliance/getRuleAdhocTestResult, /ncmcompliance/exeRulesInPolicy, /ncmcompliance/exeDevAssocwithRules, /ncmcompliance/associateToPolicy, /ncmcompliance/exeAssocCompDevPreRender, and /ncmcompliance/exeAssocCompDev.
  • OpUtils: Previously, users with read-only or operator access were able to delete Tool SNMP traps. This issue has now been fixed. Refer: ZVE-2025-5566.
  • OpUtils: Previously, there was an issue that prevented modifying the Tools SNMP traps port via settings. This issue has now been fixed.
  • OpUtils: Previously, there was an issue with updating the router CLI credentials. This issue has now been fixed.
  • OpUtils: Previously, users could move subnets and switches between groups, but the associated user access permissions were not updated accordingly. This issue has now been resolved.
  • OpUtils: Previously, the IP Address Manager / Switch Port Mapper tree did not appear in the UI when navigating back from the IP or Port pages. This issue has now been resolved.
  • OpUtils: Previously, there was an issue where scoped users were unable to delete Switch Port Mapper alerts. This issue has now been fixed.
  • OpUtils: Previously, in OpManager’s Switch Port Mapper module, clicking Cancel while modifying a port alias closed the slide panel and navigated to the previous page. This issue has now been resolved.
  • OpUtils: Previously, there was an issue in establishing a WinRM connection for DNS and DHCP Management using Kerberos authentication. This issue has now been fixed.
  • OpUtils: Previously, in version 12.8.567 and above, reserved IPs were marked as Not Reserved during subnet scans. This issue has now been fixed.
  • OpUtils: Previously, if any VLAN within a trunk port did not have an associated MAC address, the MAC details for the trunk port were not displayed. This issue has now been fixed.
  • OpUtils: Previously, IPAM subnets could be imported into Your Company. This issue has now been resolved.
  • OpUtils: Previously, users could move subnets and switches between groups, but the associated user access permissions were not updated accordingly. This issue has now been resolved.
  • OpUtils: Previously, the IP Address Manager / Switch Port Mapper tree did not appear in the UI when navigating back from the IP or Port pages. This issue has now been resolved.
  • OpUtils: Previously, there was an issue where scoped users were unable to delete Switch Port Mapper alerts. This issue has now been fixed.
  • OpUtils: Previously, in OpUtils’s Switch Port Mapper module, clicking Cancel while modifying a port alias closed the slide panel and navigated to the previous page. This issue has now been resolved.
  • OpUtils: Previously, IPAM groups could be imported into Your Company. This issue has now been resolved.
  • OpUtils: Previously, from version 12.8.629, in the IP Address Manager Tree View, the DNS Servers group could be moved to other groups, and subnets from other groups could be moved into the DNS Servers group. These issues have now been resolved.
  • OpUtils: In Switch Port Mapper, the displayed Switch Name can now be modified by the user.
  • OpUtils: Users can now view the Supernet name in the IP Address Manager tree view when the Supernet name is provided.
  • OpUtils: In Switch Port Mapper global search, users can now search for port and connected device details in stack ports. The search first checks non-stack ports and continues to stack ports if no match is found.
  • NetFlow: Support ID 12082699 – An issue where Fortigate devices reported higher traffic has been fixed through a system property update.
  • NetFlow: Previously, Dashboard APIs were accessible to Guest role users. This issue has now been resolved by restricting access to selected Dashboard APIs.
  • Firewall: Firewall Analyzer has been optimized to fetch configurations from multiple devices in parallel via API or CLI and to improve Risk Report generation performance in the web UI.
  • Firewall: Support ID 11412252 – Change management notifications were not sent for API-based VDOM devices. This issue has now been fixed.
  • Firewall: Support ID 11471109 – The Rule Reorder report displayed the To position as zero for Check Point firewalls. This issue has now been fixed.
  • Firewall: Support ID 11416892 – The Cisco ASA Unused ACE report displayed incorrect data. This issue has now been fixed.
  • Firewall: Support ID 11355127 – Palo Alto default deny rules were not handled during device rule parsing. This issue has now been fixed.
  • Firewall: Support ID 12128235 – The Rule Administration access provision option for the Administrator role was not visible on the scope page. This issue has now been fixed.
  • Firewall: Support ID 11594202 – The Security Audit report downloaded from the Device Rule page appeared empty when the device was added manually and the rule was created via file. This issue has now been fixed.
  • Firewall: Support ID 11249670 – Deny and Attack reports were not populated for F5 firewall devices due to a syslog parsing error. This issue has now been fixed.
  • Firewall: Support ID 12104317 – Saved reports for RAW Search and Aggregated Search could not be viewed. This issue has now been fixed.
  • Firewall: Support ID 12220467 – Rule expiry notifications failed after modifying the end date in the schedule object. This issue has now been fixed.
  • Firewall: Support ID 12146753 – Fixed an issue where configuration backup scheduling caused out-of-memory errors and product restarts when handling large configuration files.
  • Firewall: Support ID 12308018 – Addressed Firewall Analyzer login issues caused by idle database connections left open by the rule expiry report.
  • Firewall: Support ID 6989163 – The Rule Suggestion Report now displays No Data when there are no rules available to show.

Build 12.8.637 - April 09, 2026

Issues Fixed:

  • General : A Security Control Bypass vulnerability was identified in the Submit Query functionality due to improper query validation. This has now been fixed. (Reported by Fabius Watson).

Build 12.8.636 - March 05, 2026

Issues Fixed:

  • OpManager: From version 12.8.540, interface threshold failure alarms were transitioning between the configured severities, even when the recorded value continued to violate the Critical threshold. This has been fixed now.
  • OpManager: From version 12.8.635, an issue in the "Run Program" and "Run System Command" notification profiles caused profile trigger failures. This issue has now been fixed.
  • General: Previously, in rare scenarios, the upgrade process was halted due to a false health check failure caused by a case-sensitive comparison of the installation path. This issue has now been fixed.
  • General : The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on March 26, 2026.
  • OpManager: Previously, an Out of Memory (OOM) issue occurred because BGP polling tasks would accumulate when SNMP responses were delayed. This has now been fixed.
  • OpManager: An issue that caused failures during Downtime Schedule edit and delete operations in certain MSSQL database environments due to database constraint conflicts was observed. This issue has now been fixed.
  • OpManager: Previously, interface alarm suppression was not working in the Central inventory. This has now been fixed.
  • OpManager: Previously, custom fields were not updated during CSV discovery for Switch, UPS, Printer, and Domain Controller device categories. This has now been fixed.
  • OpManager: Previously, monitor failure alerts in the Data Collection Manager were triggered before reaching the configured number of consecutive failures due to incorrect failure count increment and reset behavior. This issue has now been fixed.
  • OpManager: Previously, the HeatMap widget experienced performance issues due to query processing. This issue has now been fixed.
  • Enterprise Edition: During upgrades from builds earlier than 128581, the upgrade may fail on probe installations using a remote PostgreSQL database if Downtime Schedules were configured before the upgrade.
  • General: Previously, in rare scenarios, the upgrade process was halted due to a false health check failure caused by deleted duplicate entries of the Network Packet Sensor in the database. This issue has now been fixed.
  • OpUtils: Previously, there was an issue that prevented IP address reservation on the Microsoft DHCP server. This issue has now been fixed.

Build 12.8.635 - February 06, 2026

Issues Fixed:

  • General: Previously, in certain scenarios, the tray icon was not stopped during the upgrade process, which resulted in upgrade failures. This issue has now been fixed.
  • OpManager: Previously, an ID discrepancy issue occurred when a database restore was performed in the Enterprise Edition. This issue has now been fixed.

Build 12.8.633 - January 07, 2026

Issues Fixed:

  • General: Previously, upgrades from base version 12.8.586 or higher were blocked at the precheck phase due to a scheduler-initiated Database Analyzer operation in certain scenarios. This issue has now been fixed.
  • General: Previously, a DOM-based XSS vulnerability was identified due to improper handling of message data in HTML. This issue has now been fixed. (Reported by Daniel Santos)
  • OpManager: XSS vulnerability detected in the Heatmap widget upon enabling 'Show label', has been fixed now. (Reported by Daniel Santos).
  • OpManager: Special characters in device or interface display names are automatically sanitized and replaced with a hyphen (-) to prevent vulnerability issues.
  • OpManager: Previously, expanding the Traffic widget under WAN IP Snapshot > Traffic showed no data in the Summary table. This issue has now been fixed.
  • OpManager: Previously, from Version 128455, the listDevices API encountered latency when Custom Fields from OpUtils was enabled in Column Chooser. This issue is now fixed.
  • OpManager: Previously, the Availability dial in snapshot pages did not display data for longer time period. This issue has now been resolved.
  • OpManager: Previously, in IPMI device snapshot page, there was a redirection issue in the Managing servers widget. This has been fixed now.
  • OpManager: From version 12.8.451 onwards, Operator and Custom Role users, despite having alarm permissions and access to all devices, were unable to perform actions on File Integrity alarms due to an internal error. This issue has now been fixed.

Build 12.8.632 - December 10, 2025

Issues Fixed:

  • General: Previously, when embedding Widget or NOC views, users faced login failures when trying to access the Device Snapshot page. This has been fixed now.
  • OpManager : The schedules for Default Reports were not generating from version 12.8.628. This issue has now been resolved.
  • OpManager : Previously, from version 128540, the suppression data was fetched in the listDevices and listInterfaces APIs even when the ‘suppressed’ column was not selected in the column chooser under Inventory page. This has now been fixed.
  • OpManager: Previously, Windows Service Down alerts were triggered incorrectly when WMI query execution failed for Windows Agent–monitored devices. This issue has now been resolved.
  • OpManager: Previously, the Windows Agent stopped working during Interface data collection when 64-bit–based data was received. This issue has now been fixed.
  • OpManager: Previously, from version 128595, there was an issue with Monitoring Forecast Trend for interface graphs. This issue has now been fixed.
  • OpManager EE: From version 128625, the following Discovery Settings options were not updating in Central. This issue has been fixed now: Discover Devices via Trap, Discovery Progress Notification, Use DNS as Display Name, Unique System DisplayName, and Restrict device sync from Add-on.
  • OpManager: Previously, from version 128539, users experienced a delay while loading a switch’s snapshot page. This issue has been fixed now.
  • OpManager: Previously, slowness was observed while accessing the Inventory tab, due to an issue while fetching the applications count. This has now been fixed.
  • OpManager: Previously, while discovering WLC devices, the device type was incorrectly associated due to an issue with OID mapping. This has now been fixed.
  • OpManager : In device snapshot page, BGP Peers Summary widget graphs failed to export as PDF. This issue has now been fixed.
  • OpUtils: Previously, if any VLAN within a trunk port did not have an associated MAC address, the MAC details for the trunk port were not displayed. This issue has been fixed now.
  • OpUtils: For Cisco switch ports, a few MAC addresses were not stored when they were collected from the original community. This issue has been fixed now.
  • OpUtils: Previously, there was an issue with updating router CLI credentials. It is now fixed.
  • OpUtils: Previously, there was an issue in establishing a WinRM connection for DNS and DHCP Management using Kerberos authentication. This issue has been fixed now.
  • NCM: Previously, changes made to configlets were reverted after applying a PPM. This issue has now been fixed.

Build 12.8.631 - November 10, 2025

New features:

  • OpManager: OpManager now integrates with ilert, which helps reduce alert noise and improve system reliability through centralized alarm management.

Issues Fixed:

  • OpManager: Previously, in version 128595 and above, an issue prevented the Problematic Devices and Alarm Details from loading in the Business View shortcut details popup. This issue has now been fixed.
  • OpManager: Previously, in version 128625 and above, an issue caused Alarm widgets to appear empty when a group alarm was raised. This issue has now been fixed.
  • OpManager: Previously, an Out of Memory (OOM) issue occurred while loading switch details in the organization map. This issue has now been resolved.
  • OpManager: Previously, the device backup failed in Network Configuration Manager if the same device was added in the Router for ARP collection in OpUtils. This issue has now been resolved.
  • OpUtils: Users can now view the Supernet name in the IP Address Manager tree view when the Supernet name is provided.
  • OpUtils: Previously, from version 12.8.629, in IP Address Manager Tree View, the ‘DNS Servers’ group could be moved to other groups, and subnets from other groups could be moved into the ‘DNS Servers’ group. These issues have now been resolved.
  • OpManager: Previously, in the device snapshot, the IP Address of EIGRP neighbours got garbled in Neighbour Details widget. This issue has now been fixed.
  • NCM: Earlier, there was an issue in the dashboard pie charts where hovered content was not hidden after drilling down. This issue has now been fixed.
  • General: There was an issue in fetching the Groups under Notification profile → Log a ticket for SDP MSP versions over 14850, 14940 and above as V1 API is deprecated. This issue has been fixed now by supporting the V3 API. Please refer to the compatibility document.
  • General: Previously, configuring the Microsoft Teams integration and sending messages failed due to internal changes in the OAuthProvider framework from OpManager version 128624. This issue has now been resolved.
  • General: Previously, in certain cases, after upgrading to version 128607 or above, file synchronization failed in failover services, resulting in secondary service startup failure. This issue has now been fixed.
  • OpManager EE: Previously, during enterprise upgrades via Settings → Upgrade Manager Settings, service pack transfers to probe services occasionally failed when service packs for both OpManager and the AppManager Plugin were uploaded. This issue has now been fixed, and the changes will take effect during the next service pack upload.
  • OpManager: In the Interface Rediscovery page under Device Snapshot, unselected interfaces appeared selected when navigating to the next page. This issue has now been fixed.
  • General: Previously, ServiceNow could not communicate with OpManager, even when the MID Server was configured in OpManager, for ServiceNow versions “Yokohama” and above due to a deprecated component in ServiceNow. This issue has now been resolved.
  • Firewall: SupportID: 12128235 – Rule Administration access provision option for Administrator role is not shown in the scope page. This issue has been resolved now.
  • OpManager: Previously, when multiple monitors were edited from the Device Template → Edit Threshold page, the changes applied only to the last edited monitor. This issue has now been fixed.

Build 12.8.630 - October 17, 2025

Issues Fixed:

  • General: Previously, in versions 12.8.627 and above, the secondary server in Failover setups could not take over when a mail server was configured. This issue has been fixed.

Build 12.8.629 - October 15, 2025

New features:

  • OpUtils: Introducing OpUtils’ enhanced DHCP management for Microsoft DHCP servers, simplifying scope and policy control with secure, agentless WinRM communication.
  • OpUtils: Introducing OpUtils’ enhanced Microsoft DNS management for smarter zone and record control and optimized name resolution with record scavenging via agentless WinRM communication.

Enhancements:

  • The following special characters are now supported: $ . : # - _ in custom columns in IP Address Manager and Switch Port Mapper.

Issues Fixed:

  • Previously, in version 12.8.628 there was an issue with loading subnet details in OpManager Central, OpManager Plus Central, and OpManager MSP Central. This issue has now been fixed.
  • Previously, in version 12.8.582, the row background color was missing for some rows in IP Address Manager and Switch Port Mapper. This issue has now been fixed.
  • Previously, in version 12.8.455, there was an issue with creating custom columns in IP Address Manager or Switch Port Mapper caused issues during backup and restore.
  • Previously, there was a UI issue with the Add Switch functionality, where the display of the scan option appeared as none. This issue has now been resolved.

Build 12.8.628 - October 10, 2025

New features:

  • General : OpManager integrates with Jira Service Management (Cloud) to streamline IT service management by automatically converting network alerts into issues in Jira.
  • OpManager Plus: Introduced a new licensing model for the SAM Bundle.
  • OpManager: Introduced 'Remote Collector' - a lightweight agent designed for low-spec machines. It functions as a mini poller for discovering devices and availability monitoring in remote or distributed networks.
  • NetFlow: The 'Network Packet Sensor' agent has been renamed as 'Remote Collector' with additional capabilities.

Enhancements:

  • OpManager Plus EE: New Device and Interface widgets are now integrated into the Central server of OpManager Plus Enterprise Edition.
  • OpManager: Alarm Correlation Rules now support new criteria such as Service Monitors, Windows Service Monitors, AD Services, Exchange Services, MSSQL Services, PerfGroup, and Process Monitors.
  • OpManager: Group-related anomalies were not displayed correctly when a group of groups contained an interface group. This issue has now been fixed.
  • OpManager: Previously, Disk count discrepancies found in Disks tab of EqualLogic Storage Device. This issue has been fixed now.
  • OpManager: Introduced the WLC Name field to the advanced report under the Access Point Details category in the Wireless LAN Controller.
  • OpManager: Henceforth, the 'Model' and 'Manufacturer' fields will be synced for CIs under the "Configuration Item" CI class during CI sync from OpManager to ServiceNow.
  • OpManager: The DCM credential check now includes an option to exclude UPS devices. In addition to category-based skipping, the logic has been extended to support exclusions based on category flags.
  • OpManager: Added a new monitor – Nutanix VM Storage Utilization (Prism API) to track the percentage of storage space used by the VM.
  • OpManager: The default CPU/Memory/Disk Utilization reports under Reports → Health and Performance now generate results based on the monitors available in their corresponding Perf Group.
  • OpManager: Users can now modify the Business views associated with the Layer2 map.
  • OpManager: New criteria 'Cisco Trunk port' has been introduced in the interface discovery page.
  • OpManager: A new report 'Meraki Sensor details' has been added under Meraki Reports.
  • OpManager: Henceforth, the threshold values for WAN links under MX devices will be measured in Mbps.
  • OpManager: The order of interface graphs on the Interface Snapshot page has been updated to align with current market use cases, improving usability and relevance.
  • OpManager: ServiceNow downtime schedules under Change Requests can now be synced as OpManager downtime schedules, enabling seamless coordination of planned maintenance across both platforms.
  • OpManager: The relationships from the Uplink Dependency, Virtualization, and ADDM modules in the Organization Map can now be synced with ServiceDesk Plus Cloud for visualizing the connections between the elements.
  • OpManager: Users can now enable or disable the propagation of member status to group status for each group individually.
  • OpManager: Henceforth, devices or interfaces will be automatically added to or removed from criteria-based groups whenever their properties are updated.
  • OpManager MSP: The MSP Central now displays real-time Probe status for improved visibility in the top header.
  • NCM: Configuration changes now display both the difference and highlight the specific block where the change occurred.
  • NCM: From build 128249, there was no option to delete additional protocols from the device template. This option has now been provided.
  • OpUtils: The following API's: 'ipamAddGroup', 'renameGroup', 'deleteGroup', 'getIPAMTree','updateIpamTreeGroup', 'getSupernetDetails', 'updateSupernetDetails','addSupernet', 'deleteSupernet',have been made available to perform actions from third-party tools.

Security Fixes:

  • OpManager: Anchor tags with target="_blank" now include the rel="noopener noreferrer" attribute to prevent reverse tab-nabbing and improve security.

Issues Fixed:

  • OpManager: Previously, when the device type was updated and the CLI monitor had a custom command, the corresponding monitors would sometimes get duplicated or revert to the default command instead of using the custom one. This issue has now been fixed.
  • OpManager: Out-of-Memory (OOM) errors caused by stale entries from Interface Scheduled Discovery and accumulated SNMP requests from Routing Protocol Monitoring have been fixed.
  • OpManager: Previously, there was an issue with the forecast alert message in the Japanese language, where a few placeholders were missing. This has now been fixed.
  • OpManager: The Anomaly Summary tab, intended for OpManager and OpManager Plus, was displayed across all ITOM products. It is now limited to OpManager and OpManager Plus.
  • OpManager: In certain cases, notes were being added to already closed SDPOP requests. This issue has now been fixed.
  • OpManager: In recurring alerts, the MonitorName variable in alarm notifications was not being replaced correctly in the notification email. This issue has now been fixed.
  • OpManager: Previously, no proper message was shown when a new inventory update was initiated while a VMWare parent device(vCenter/ESX Host) inventory update was already in progress. This issue has now been fixed.
  • OpManager: Notification Profiles could not be edited or saved when stray datastore entries were associated with them. This issue has now been resolved.
  • OpManager: A trap containing a varbind of type DateAndTime was previously displaying garbled data when processed in the trap alarm. This issue has now been fixed.
  • OpManager: Previously, while associating a Notification Profile to a device from the Device Snapshot page resulted in a "no criteria" error, even though the criteria had been configured. This issue has now been fixed.
  • OpManager: Resolved an issue where Adaptive Thresholds produced negative expected values. They will now always remain 0 or above.
  • OpManager: Previously, all credential associations for Lenovo IPMI were displayed in the UI, rather than the supported SNMP Credential option. This issue has now been resolved.
  • OpManager: Previously, the interfaces did not generate threshold clear alarms even after the values returned to normal. This issue has been fixed now.
  • OpManager: During REST API based status polling for Meraki devices, the device availability status was incorrectly updated. This issue has been fixed now.
  • OpManager: Previously, the Cisco ACI device was being polled to fetch the 'Recent Faults' even when the ACI is down. This issue has been fixed now.
  • OpManager: Previously, the availability polling for Cisco ACI happens via internal Ip instead of Out Band Ip. This issue has been fixed now.
  • OpManager: Previously, users were unable to change the Device Type for Lite devices in bulk through Inventory or Quick Configuration Wizard (QCW). This issue has now been fixed.
  • OpManager: Previously, WLC Access Points triggered an 'Up' alarm when an SNMP timeout occurs during status polling, if the WLC controller was up. Now, if the controller is up, the previous state of the Access Points will be retained.
  • OpManager: Proxmox discovery or rediscovery failed in specific scenarios where the target environment lacked VMs or containers. This issue has now been fixed.
  • Enterprise Edition: Previously, when Probe-Central communication was modified, the UCV drop-down reset to "All Probes". This issue has now been fixed.
  • NCM: Previously, bulk programmable configlets could not be added due to an issue. This has been fixed now.
  • OpUtils: Previously, Operator Role users had access to 'Active Directory API', 'getIPAMSettings API', 'getSPMSettings API','getRogueSettings API'. This access is now restricted.

Build 12.8.627 - September 30, 2025

Enhancements:

  • General: Added NFS support for shared folder in Linux Failover.
  • General: PostgreSQL has been upgraded to version 14.19. The PostgreSQL vulnerability issues from 14.18 have now been fixed.
  • OpManager: Introduced a Four-Node (DC-DR) Architecture for Windows Failover.
  • OpManager: From version 128627, OpManager Enterprise Edition can be converted to OpManager Plus Enterprise Edition by applying an OpManager Plus Enterprise Edition license.

Issues fixed:

  • General: Previously, the group associated the Notification Profile name w.r.t the selected device was not listed in the Notification Profile Filters of the Notification Triggered Report. This issue has now been resolved.

Build 12.8.626 - September 24, 2025

New feature:

  • NetFlow : Provision to create Probe specific NetFlow Groups (Device Group, Interface Group, IP Group, and Access Point Group) in OPM EE Central and OPMPlus EE Central. These groups will be automatically synchronized to the respective Probes.
  • NetFlow : Provision to assign NetFlow scopes (Device Groups, Interface Groups, IP Groups, and Access Point Groups) during user account creation/updation in OPM EE Central and OPMPlus EE Central.
  • Firewall : Firewall add-on module devices can now be assigned to Operator and Role user accounts in OpManager EE Central and OpManager Plus EE Central Server.

Issues Fixed:

  • General : From version 128581, users experienced login failures after updating the password policy due to missing payload encryption until the next service restart. This issue has now been resolved.
  • OpManager: In the Alarm tab, the issue with event generation time format across different time zones has been fixed now.

Build 12.8.625 - September 18, 2025

New feature:

  • OpManager Storage Monitoring: Introduced support for monitoring Lenovo DS Series devices through REST API.
  • OpManager: Introduced new Default Alarm Rules feature, providing a centralized view of internally raised alarms with support for severity customization and the ability to enable or disable specific alarms.

Enhancement:

  • OpManager: Hardware monitoring support has now been introduced for Allied Telesis Switches.
  • OpManager: Introduced Stack Switch Monitoring support for HPE H3C FlexFabric 5700 Switch series and Allied Telesis stack switches.
  • OpManager: Introduced Info severity alarms, which provide informational notifications without affecting device status.
  • OpManager: Introduced $profileCriteriaValues variable, which can be added to Alarm Correlation Rule messages to include the configured and actual values recorded when the alarm was raised.
  • OpManager: A new column titled Member Availability has been added under: Inventory → Groups; Settings → Configuration → Groups; and the All Groups widget, to display the average availability of members within each group.
  • OpManager: A new option has been introduced in the Device Snapshot page, to view the groups associated with the selected device.
  • OpManager: A new global option has been introduced in the Interface Discovery Profile allowing interfaces that match specified criteria to be automatically discovered across all discovery methods like Add Device, Network Discovery and Rediscovery.
  • OpManager: A new option 'Connected Interface Discovery' under Discovery Settings has been added to enable the discovery of Layer 2 connected interfaces of network devices, enhancing topology mapping and device visibility.
  • OpManager: A new 'Map View' option has been introduced for Groups, through which Neighbour device details can now be mapped and viewed. The mapping is generated automatically upon clicking Map View.
  • OpManager: Additional Printer vendors are now supported, enabling broader discovery and monitoring of new Printer models.
  • OpManager: Users can now configure consecutive failure threshold to receive alert when a particular switch in the Switch stack is unavailable for N consecutive polls.

Issue fixes:

  • OpManager: Previously, clearing or deleting alarms would fail if the alarm’s entity contained a comma. This issue has been fixed now.
  • OpManager: From version 128180, alarm escalation rules could not be configured for intervals exceeding 500 minutes. This issue has been fixed now.
  • OpManager: From version 128540, Rearm alarm for interface threshold failures are not triggered when threshold values are set for all severities. This issue has been fixed now.
  • OpManager: Previously, during decoding a trap message, MAC addresses got garbled. It has been fixed now.
  • OpManager: Previously, a false alert was generated when a device metric value changed from empty to its original value. This issue has now been resolved.
  • OpManager: In certain cases, monitors were duplicated when a device type was changed from one type to another. This issue has now been fixed.
  • OpManager: From version 12.8.458, the Monitoring Agent experienced issues while querying inventory details in certain environments. This issue has now been resolved.
  • OpManager: From version 12.8.540, the 'Restart this service' action under Windows Services Monitoring was not functioning as expected for agent-monitored devices. This issue has now been resolved.
  • OpManager: Intermittent SNMP data collection issues caused by improper cleanup of polled information have now been fixed.
  • OpManager: UI size overlapping issues for string monitors in Custom Dials under the Device Snapshot page are now resolved.
  • OpManager: Previously, special characters were incorrectly displayed at the start of device metrics like Serial Number, Model, etc., for certain printer models. This issue is now resolved.
  • OpManager: Since version 12.8.610, the Heatmap widget had an issue with displaying tooltip data correctly. This has now been fixed.

Build 12.8.624 - September 10, 2025

Enhancements:

  • General: Apache Tomcat has been updated to enhance security.
  • OpManagerMSP: Notification profile details are now available on the MSP Central device summary page.

Issues Fixed:

  • OpManager: Previously, while establishing a Telnet connection, the text cursor was not operative. This issue is now fixed.
  • General: Previously in MSSQL installations, if the auth providers returned a larger access token for authentication, the system failed to save the OAuth Provider configurations. This issue has now been fixed.

Build 12.8.623 - September 05, 2025

New Features:

  • OpManager: Introduced the 'Anomaly' dashboard in Zia to track and visualize unusual activity or performance spikes in devices.
  • OpManager: A new subtab 'Anomaly Summary' has been added under Alarms to list all the details regarding the anomalies in devices and device groups.
  • OpUtils: In the IP Address Manager module, the Cisco Meraki controller has been added under DHCP server.

Enhancements:

  • OpManager: Users can now select specific disk partitions for monitoring, using the Add Partition(s) option available at Device Snapshot -> Monitors -> Add Performance Monitors page.
  • OpManager: OpManager now automatically re-runs the data archiving process in case of archiving failures to prevent data loss.
  • OpManager: The interfaces list view page under Inventory has been optimized for enhanced performance.
  • OpUtils: Custom columns now support the following characters: a-z A-Z 0-9 . $ \s\_.
  • OpManager: Access Point (AP) channel information will now be updated during scheduled AP discovery.
  • OpManager: Added around 1000 new Device Templates to improve classification of devices during Network discovery.
  • General: The external third party jar dependency for exporting pdf reports in Japanese, Chinese and Korean languages has been removed.
  • OpUtils: DHCP MAC Filtering and DHCP Reservation features are now implemented using environment variables during PowerShell script execution.
  • OpUtils: The IP History view now includes a new 'Description' column for added context. Additionally, some less relevant columns have been removed to declutter the view.
  • OpUtils: In the Switch Port Mapper module, users can now discover switches directly from the Cisco Meraki controller.
  • OpUtils: In the Switch Port Mapper module, VLAN ID is now collected from the updated OID .1.3.6.1.4.1.9.9.68.1.5.1.1.1 on Cisco switches.

Issues Fixed:

  • OpManager: The Critical severity threshold has been removed from the default forecast rule configuration for new customers. For existing customers, the behaviour remains unchanged.
  • OpManager: From version 12.8.595, the device list was not displayed in the QCW Alarm Suppression page when 'Filter by Devices' was selected. This has now been fixed.
  • OpManager: Previously, when deploying the agent using the Push Remotely option in OpManager's UI, the Remote Installer file was being flagged by the scanner tool. This issue has now been resolved.
  • OpManager: Previously, the serial number, software version, and manufacturer information were not displayed correctly for certain vendors. This issue has now been fixed.
  • OpManager: Previously, software version data for SDP could not be retrieved due to an internal issue. This issue has now been fixed.
  • OpManager: Previously, exporting the script template failed when the template name contained non-English characters. This issue has now been fixed.
  • OpManager: Previously, when using other language keyboards in the RDP window in OPM, the keyboard did not work properly. This issue has now been fixed.
  • OpManager: Previously, the Hardware tab was missing in the snapshot page for F5 and Kemp Load Balancers. This issue has now been fixed.
  • OpManager: Previously, an F5 load balancer pool member was not discovered if the node IP was configured as an FQDN. This issue has now been fixed.
  • OpManager: Previously, Kemp load balancers were discovered as Linux servers because their SYSOID was a Linux OID. This issue has now been fixed.
  • OpManager: Previously, clicking the device count in the 'Availability, Health and Alarm Summary' widget redirected to the inventory page with incorrect data if the associated business view had been renamed. This issue has now been fixed.
  • OpManager: Previously, the display Name of Subnets was garbled when updated with Japanese characters. This issue has been fixed now.
  • OpManager: Slowness issue observed during status update of business view has been fixed now.
  • OpManager: Inappropriate decommissioned alerts were raised for Ruckus WLC when monitored via RESTAPI. This issue has been fixed now.
  • OpManager: Previously some of the fields in Advanced Reports were not translated. This issue has been fixed.
  • OpManager: Previously, storage volume utilization was reported incorrectly for Hitachi Storage Devices. This issue has been fixed now.
  • OpManager: Advanced report could not be saved or previewed when the Availability Monitors filter was selected in the criteria. This issue has been fixed now.
  • General: Previously, in the Old model failover setups, there was a rare case where, if the database got disconnected, the Standby service would take over even though the Primary service was still active. It has been fixed now.
  • OpManager: An internal issue caused some WLC devices to be categorized as 'Switch' during network discovery. This issue has been fixed now.
  • Enterprise Edition: Previously, in a rare scenario, if a probe tried to connect to Failover Central while it was switching from standby to running, the connection would not succeed until the probe was restarted. This has been fixed now.
  • Enterprise Edition: Previously, in rare cases, if a probe experienced frequent communication loss, the connection was not re-established automatically. This issue has now been fixed.
  • OpUtils: There was an Out of Memory (OOM) issue that occurred when enabling email alerts while managing a large number of devices in Rogue Detection. This issue has been resolved now.
  • OpUtils: A timeout issue caused by handling large volumes of ARP data in routers has now been fixed.
  • OpUtils: Previously, there was an issue with importing subnet-level custom column values. This has now been fixed.

Build 12.8.614 - October 23, 2025

Enhancements

  • OpUtils: In Global Search, users can now look up port and connected device details in stack ports within Switch Port Mapper. The search will be first in the non-stack ports, and if no match is found, it will continue to search in stack ports.

Issues Fixed:

  • Firewall: Support ID: 11249670 – Deny Report and Attack Reports were not populated for F5 firewall devices due to a syslog parsing issue. This issue has been fixed.
  • OpManager: Previously, Notification Profiles created in versions below 128401 would fail to function after upgrading to version 128608 or above if they remained unmodified. This issue has now been fixed.
  • OpManager: Previously, data collection was suspended for all devices due to a timeout issue in the REST API polling scheduler. This issue has now been fixed.

Build 12.8.613 - September 23, 2025

Issues Fixed:

  • OpManager: From version 12.8.595, the device list was not displayed in the QCW Alarm Suppression page when 'Filter by Devices' was selected. This has now been fixed.
  • OpManager: Rearm alarm for interface threshold failures are not triggered when threshold values are set for all severities. This issue has been fixed now.
  • OpManager: From version 12.8.458, the Monitoring Agent experienced issues while querying inventory details in certain environments. This issue has now been resolved.
  • OpManager: From version 12.8.540, the 'Restart this service' action under Windows Services Monitoring was not functioning as expected for agent-monitored devices. This issue has now been resolved.
  • OpManager: From version 12.8.610, the Heatmap widget had an issue with displaying tooltip data correctly. This has now been fixed.
  • OpManager: In certain cases, monitors were duplicated when a device type was changed from one type to another. This issue has now been fixed.
  • OpManager: Previously, a false alert was generated when a device metric value changed from empty to its original value. This issue has now been resolved.
  • OpManager: Intermittent SNMP data collection issues caused by improper cleanup of polled information have now been fixed.
  • OpManager: From version 12.8.580, users faced issue with loading the 'Meraki Organization Summary by Category' widget. This issue has been fixed now.

Build 12.8.611 - August 25, 2025

New Features:

  • OpManager: OpManager now supports monitoring the Proxmox Virtual Environment (VE), providing continuous performance insights and deeper visibility into your Proxmox virtual infrastructure.

Build 12.8.610 - August 22, 2025

New Features:

  • OpManager: The Heatmap widget now supports hierarchical group views, allowing users to drill down from parent to child groups.
  • OpManager: OpManager now supports monitoring of Aruba Silver peak SD-WAN, enabling real-time tracking of controllers, tunnels, WAN links, and overall network health.
  • OpManager Storage Monitoring: Monitoring HPE MSA 2040 devices is now supported under HPE MSA device template.
  • General: OpManager events and alarms can now be seamlessly forwarded to Splunk and other SIEM tools using Notification Profiles and Templates.
  • OpManager: OpManager now enables message previews in MS Teams notifications for messages sent from OpManager.
  • OpManager: Groups criteria have been enhanced with Advanced Criteria options.
  • OpManager: Interface Discovery profile criteria have been enhanced with Advanced Criteria options.

Enhancements

  • OpManager: Enhanced the Graphical View widget with new filtering capabilities and introduced the Tile widget.
  • OpManager: Enhanced scalability for Real-Time widgets and resolved a Chrome browser crash issue affecting them.
  • OpManager: Zoho Map has been upgraded from V8_8_3 to V8_8_12. Cluster markers now dynamically adopt the color of the highest severity among the grouped markers.
  • OpManager: Discovery rule engine criteria can now be defined using custom fields. This criteria is applicable only to CSV-based discovery and re-run of rules from the Rule Engine page.
  • OpManager: Users can now associate custom fields during interface discovery via the Interface Discovery profile.
  • OpManager: Manual selection is now supported in the Interface module of Groups.
  • OpManager: The Interface List page now includes an option to associate or create manual Interface Groups.
  • OpManager: In Health Reports, each monitor's graph is now displayed using different colours.
  • OpManager: The Filter in Advanced Reports has been improved for better usability and a smoother user experience.
  • OpManager: Device Groups are now available in all default interface reports, allowing you to filter interfaces by device group.
  • OpManager: The Group Name filter in Advanced Reports now supports GroupOfGroups as well.
  • OpManager: Introduced support to fetch and add existing IPSLA monitors based on UDP Jitter (without VoIP) from the source device under VoIP Add Existing Monitor.
  • OpManager: For IPSLA Monitors, the Poll Interval can now be set to a value greater than or equal to the Frequency (in minutes).
  • OpManager: Group scope support has been introduced in Alarm Correlation Rules for interfaces groups. Users can now specify a number or percentage of interfaces within a group that must meet the conditions for the rule to trigger.
  • OpManager: Interface Group-based filtering has been introduced in alarm-related widgets, allowing users to filter and view alarms specific to selected interface groups.
  • OpManager: Introduced support to group IPSLA monitors for improved organization and simplified management of multiple monitors.
  • OpManager: Around 20 new Device templates are added for proper classification of devices during Network Discovery.
  • OpManager Storage Monitoring: Replication Status and Copy Service Status monitors have been introduced for IBM Spectrum Virtualize devices.
  • OpManager Storage Monitoring: Disk Health Status monitor is now supported for Dell ME4 devices.
  • OpManager Storage Monitoring: The following storage reports have been introduced for storage arrays: Utilization, Latency, IOPS, and Throughput.

Security Fixes:

  • OpManager: Previously, a Stored Cross-Site Scripting (XSS) vulnerability was identified in the description field of the SNMP Trap Processor module. This issue has now been fixed. (Reported by tuannq x ngockhanhc311)
  • General: Referrer-policy header has been updated to "strict-origin" to enhance security.

Issues Fixed:

  • General: Previously, from version 128540, while performing test action for Freshdesk, issues occurred when company field is enabled. This issue is now resolved.
  • OpManager: The data unavailability issue in the 'Devices Exceeding N% Disk Utilization' widget has been fixed.
  • OpManager: The UI glitch in the filter option of the Hardware Health Report has been fixed.
  • OpManager: Previously, there was an issue with the export folder occupying too much drive space. This issue has been fixed now.
  • OpManager: IPSLA Monitor Status was not synced to the Central Server due to an internal issue. This issue has now been fixed.
  • OpManager: Intermittent data collection failures occurred when the Poll Interval of an IPSLA monitor was modified from the snapshot page. This issue has now been fixed.
  • OpManager: Previously, while selecting the "Yesterday" time period in the time filter in Report builder for devices and interfaces, the generated data was incorrect. This issue has now been addressed.
  • OpManager: Previously, Advanced report failed to generate whenever criteria is provided for the VLAN ID Field. This issue is now resolved.
  • OpManager: Previously, Threshold Monitor data was duplicated in Advanced report while editing threshold configurations. This issue is now fixed.
  • OpManager: Previously, the header name of a single Monitor collected for a device using different protocols were not listed while exporting Advanced report. This issue is now fixed.
  • OpManager: Previously, Storage Disk Alarms were not triggered during some instances. This issue is now fixed.
  • OpManager: Previously, few details were not listed in Snapshot Page for Lenovo and HPE MSA Storage devices. This issue is now fixed.
  • OpManager: Previously, Test Action for associating SNMP V3 Credentials with Storage devices failed. This issue is now fixed.
  • OpManager: Previously, Storage device name was displayed in place of disk name in Storage Email alerts triggered through Notification Profile. This issue is now fixed.
  • OpManager: Previously, exporting PDF reports from the Device Snapshots > Monitor section that had non-English characters in the file name caused the report to open in a new browser tab instead of downloading. This issue has now been fixed.
  • OpManager: Previously, the Timeout header on the Settings → Monitoring → Service Monitors page was incorrectly displayed as 'ms' instead of 'sec'. This issue has now been fixed.
  • OpManager: Negative values were returned as SNMP OID response for Memory Utilization(UCD SNMP MIB) monitor. This issue has been fixed now.
  • OpManager: Previously, devices associated with custom device templates prefixed with 'VMware', 'HyperV', 'Xen', or 'Nutanix' were not displayed on the Inventory page when using the 'Type' filter. This issue has now been resolved.
  • OpManager: Sometimes, Agent-monitored devices experience data collection failures when the data collection archive cannot be unzipped due to file timestamp warning issues. This issue is now fixed.
  • OpManager: From version 12.8.582, agent-monitored devices were not displayed in the Available Devices list under the Associate options of Settings → Process & Script Templates. This issue is now fixed.
  • OpManager: Previously, IP address changes in agent-monitored end devices were not reflected due to a synchronization issue. This issue is now fixed.
  • OpManager: Previously, the device serial number was displayed incorrectly when it contained only numeric characters due to a data type issue. This issue has now been resolved.
  • OpManager: Currently, Interface display name will be displayed instead of Interface name during Interface Discovery.
  • OpManager: Currently, Interfaces Display Name will be updated in the Interface Scheduler if the property is enabled as true.
  • OpManager: During CSV discovery, the switch and wireless devices failed to add due to an internal issue with the Switch stack discovery process from version 12.8.235. This issue has been fixed now.
  • OpManager: Previously, Groups created with preceding spaces were listed as ' Group not found'. This issue is now fixed.
  • OpManager: Previously, when 'Poll using IP address' is enabled, the DNS name was not updated periodically due to an internal issue. This issue has been fixed now.
  • OpManager: Previously, during CSV discovery, devices with empty values in the 'Group Name' or 'Device Type' columns were skipped from discovery. This issue has now been fixed.
  • OpManager: Previously, changes made to the position of devices in the Layer 2 Map was not saved. This issue is now fixed.
  • OpManager: Previously, while associating Devices with Business View using the Discovery Rule Engine, the Default icon for the device was attached. This issue is now fixed.
  • OpManager: Previously, in Business View, the Interfaces of the destination device were incorrectly listed under the source device's Interface list. This issue has now been fixed.
  • OpManager: Previously, Failed Monitors Report from Data Collection Manager was sent with empty data due to some stale entries. This issue is now fixed.
  • OpManager: Previously, agent data collection files were captured as external files during file integrity scan. This issue is now resolved.
  • OpManager: Optimized credential type selection, based on device type while performing Update Inventory with the 'Rediscover existing VM' option enabled.
  • OpManager: The Device and Interface snapshot pages have been optimized to overcome the slowness observed while fetching availability data.
  • OpManager: Earlier, Lite devices setup showed device availability as Clear despite being down when polled via ICMP protocol. This issue is now fixed.
  • OpManager: Previously, the CSV file uploads containing Japanese content failed with the error "Invalid input characters detected in the CSV file." This issue has now been resolved.
  • OpManager: Previously, Linux devices were marked as 'unknown' during scheduled rediscovery due to error while fetching the serial number value. This issue is now fixed.
  • OpManager: Previously, sorting by severity for groups in heat-map widget were not operational. This issue is now fixed.
  • OpManager: Previously, while configuring the Discovery Rule Engine, existing configuration were not displayed due to an internal issue. This has now been fixed.
  • OpManager: Previously, in Interface bandwidth exceeded alert message, ifSpeed value was displayed in place of current traffic value. This issue is now fixed.
  • OpManager: Previously, the Group alerts were not generated when the status of member is changed. This issue has been fixed.
  • OpManager: Availability dashboard widget under Groups page has now been optimized.
  • OpManager: Previously, adding a Business view was time consuming, if any member device was undergoing a rediscovery process. This issue is now fixed.
  • OpManager Storage Monitoring: Previously, in certain cases, there were issues with discovering EMC VNX BLOCK devices in CentOS installations. This issue has now been fixed.
  • Enterprise Edition: Business Views (BVs) linked to the user scope in Central were previously not syncing to the Probe, if a BV was renamed to an existing name. This issue has now been resolved.
  • OpManager MSP: The Run Archive page in Database Maintenance Settings encountered loading issues when probe names contained too many characters. This issue is now fixed.
  • OpManager MSP: Previously, Site filter was not displayed in the header of exported and scheduled report. This issue is now fixed.
  • OpManager RMM: In RMM Central UI, closing the test script page using the exit icon in device snapshot page triggered opening the same page again. This issue is now fixed.
  • General: The password input field size has been increased for the OpManager–ServiceNow integration.
  • OpManager: Previously, in a few rare instances, new tickets were created instead of updating existing tickets in Jira On-Premise. This issue is now resolved.
  • OpManager: Fixed an issue where the Notification Profile page failed to load when using the Chinese language interface.
  • OpManager: From version 12.8.540, if the service was restarted while a Free Disk Space self-monitoring alert was active, the Self Monitoring banner was displayed incorrectly, even when the value was below the configured threshold. This issue has now been resolved.
  • OpManager: In some scenarios, the 95th percentile value was not being generated in Advanced Reports. This issue has now been resolved.

Build 12.8.609 - August 12, 2025

Enhancements:

  • General: The Ember.js version has been upgraded to 5.12 for the Support and View Logs pages.

Build 12.8.608 - August 05, 2025

Enhancements:

  • OpManager: Introduced an option in Notification Profile to ignore notifications from devices or interfaces in selected groups.
  • Enterprise Edition: Previously, when groups were created in the Central server and synchronized, they were pushed to all connected probes by default. OpManager now allows to selectively sync groups to specific probes.
  • Enterprise Edition: OpManager now supports centralized synchronization of Discovery Settings, Database Maintenance, and Graph Display Settings from the Central Server to selected Probe.
  • Enterprise Edition: Users can now create credentials directly from Central and push them to the respective probes.

Build 12.8.607 - August 04, 2025

Issues Fixed:

  • OpManager: Operations such as add/edit/delete performed in Credential module will now be audited.
  • Enterprise Edition : From version 12.8.583, POST operations performed via UCV from the Central UI were failed due to an internal cache issue after creating a custom role. This issue has been fixed now.
  • OpManager MSP: From version 12.8.583, internal server error occurred in a dashboard API preventing users from get listed in the Dashboard association page. This issue has been fixed now.

Build 12.8.598 - August 29, 2025

Issues Fixed:

  • OpManager : Previously, a Stored Cross-Site Scripting (XSS) vulnerability was identified in the description field of the SNMP Trap Processor module. This issue has now been fixed. (Reported by tuannq x ngockhanhc311. Refer CVE-2025-9227)
  • OpManager : Previously, there was an issue with the export folder occupying too much drive space. This issue has been fixed now.
  • NCM: Previously, after upgrading to version 12.8.537 or above, inventory devices may have appeared empty due to the deletion of the default SNMP "Public" profile. This issue has now been fixed.
  • OpManager: Previously, the device serial number was displayed incorrectly when it contained only numeric characters due to a data type issue. This issue has now been resolved.
  • OpManager: In some scenarios, the 95th percentile value was not being generated in Advanced Reports. This issue has now been resolved.
  • OpManager: Previously, there was an issue with the export folder occupying too much drive space. This issue has been fixed now.
  • OpManager: From version 12.8.540, if the service was restarted while a Free Disk Space self-monitoring alert was active, the Self Monitoring banner was displayed incorrectly, even when the value was below the configured threshold. This issue has now been resolved.

Build 12.8.597 - August 20, 2025

Issues Fixed:

  • Enterprise Edition: From version 12.8.583, POST operations performed via UCV from the Central UI were failed due to an internal cache issue after creating a custom role. This issue has been fixed now.
  • OpManager MSP: From version 12.8.583, internal server error occurred in a dashboard API preventing users from get listed in the Dashboard association page. This issue has been fixed now.
  • OpManager: From version 12.8.458, the Monitoring Agent experienced issues while querying inventory details in certain environments. This issue has now been resolved.
  • OpManager: From version 12.8.582, agent-monitored devices were not appearing in the Available Devices list under the Associate options of Settings -> Process & Script Templates. This issue has now been resolved.

Build 12.8.595 - July 23, 2025

Enhancements:

  • OpManager: OpManager now allows adding Custom Device templates using a CLI Identifier in addition to the SNMP Identifier. The CLI Device templates are determined based on the response from CLI commands.
  • OpManager: OpManager now tracks the cycle history of alarms, giving better insights into alarm violations. This can be accessed from Alarms module under Advanced Reports.
  • OpManager: Advanced Reports now include key reliability metrics such as MTTR, MTBF, MTTF, MTTA, and Flap Count, available under the newly added Incident Metrics column group.
  • OpManager: Introduced new dashboard widgets to show key reliability metrics like MTTR, MTBF, MTTF, and MTTA, making it easier to track incident trends.
  • OpManager: In Advanced Reports, 95th percentile Value Type has been added for performance monitors of Devices and Interfaces.
  • OpManager: Device Down Settings can now be configured per device or in bulk via the device and group snapshot pages respectively. Users can also choose to overwrite existing settings for selected devices directly from the group page.
  • OpManager: Users can define one or more severity levels to trigger Device Down alerts and configure up to 10 polling attempts(No.of Failed Polls) before alert generation.

Issues Fixed:

  • General : From version 12.8.583, the Reset TOTP Secret icon was not displayed on the User Management page for editions other than Enterprise. This issue has been fixed now.
  • OpManager: The commons-fileupload.jar dependency has been upgraded to version 1.6.0 by the ServiceDesk Plus Cloud team. The necessary changes to support this JAR migration have been implemented in OpManager.
  • OpManager: From version 12.8.540, Syslog rules could not be configured to ignore the event. This issue has been fixed now.
  • OpManager: Previously, hardware widgets were not listed in the Hardware tab for certain devices due to an internal issue. This issue has now been fixed.
  • OpManager: Previously, agent-monitored devices did not generate Security event log alerts when configured separately for Audit Success or Audit Failure events. Both scenarios are now supported.
  • OpManager: Previously, the Custom Widgets in NOC view had alignment issues. This issue has now been fixed.
  • OpManager: Previously, exporting customer-filtered reports to Excel did not work in OPM MSP Central. This issue has now been fixed.
  • OpManager: Previously, Ping and Trace Route features did not work for storage devices. This issue has now been fixed.
  • OpManager: Data was not available in the Integrated Report when the report was created in a version prior to 126260 and viewed in versions above 128401. This issue has now been fixed.
  • OpManager: Previously, Advanced Report export failed for the custom user role. This issue has now been fixed.
  • OpManager: Previously, the Time label on the x-axis in Report Builder was not translated. This issue has now been fixed.
  • OpManager: Previously, data was not displayed in the Interface Trend Report when viewing for larger time periods. This issue has now been fixed.
  • OpManager: Previously, multiple threshold violation alerts for performance monitors were generated with the same timestamp instead of the actual data collection time. This issue has now been fixed.
  • OpManager: Previously, when an agent-installed VM server was cloned, requests from the cloned VMs overlapped with the original VM's details. This issue has now been fixed.
  • OpManager: Previously, when an agent upgrade failed, data collection continued, but the agent status was incorrectly shown as Agent Down. This issue has now been fixed.
  • OpManager: Previously, an issue with the false auditing of hardware information retrieval for agent devices was identified. This issue has now been fixed.
  • OpManager: Previously, there was an issue fetching the serial number of Cisco switch stack devices on the Device Summary page. This issue has now been fixed.
  • OpManager: Previously, during the manual VMware 'Update Inventory' process, if monitored VMs were selected, they were sent for discovery again. This issue has now been fixed.
  • OpManager: Previously, in Hyper-V hosts, VM disk data was not being populated during inventory collection. This issue has been fixed now.
  • OpManager: Previously, in some instances, virtual disk entries removed from a Nutanix cluster were not properly reflected in its cluster inventory in OpManager. This issue has now been fixed.
  • OpManager: Previously, when a monitoring agent was reinstalled, its status was incorrectly set to "Uninstalled". This issue has now been fixed.
  • OpManager: Previously, in F5 Load Balancers, Virtual Servers and Pool Members could not be added when their IP addresses were in IPv6. This issue has now been fixed.
  • OpManager: Previously, during CSV discovery, devices with empty values in the 'Group Name' or 'Device Type' columns were skipped from discovery. This issue has now been fixed.

Build No 12.8.590 - March 13, 2026

Issues Fixed:

  • General : The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on March 26, 2026.
  • General: From Version 128590, users with Write permission for Dashboards (including Operator type users) can now customize dashboard widget size and position.
  • General: Previously, in rare scenarios, the upgrade process was halted due to a false health check failure caused by a case-sensitive comparison of the installation path. This issue has now been fixed.
  • OpManager: In certain cases, notes were being added to already closed SDPOP requests. This issue has now been fixed.
  • OpManager: Previously, when the language was set to Japanese, the header in the Default Report was misaligned. This issue has now been fixed.
  • OpManager: Previously, when scheduling a report from the Device Monitor Graph page, if the schedule name contained Japanese characters, the scheduled email was not sent. This issue has now been fixed.
  • OpManager: Previously, in rare cases, an Out of Memory (OOM) issue occurred during CI sync when ServiceNow was configured in OpManager. This issue has now been fixed.
  • OpManager: Previously, an Out of Memory (OOM) issue occurred because BGP polling tasks would accumulate when SNMP responses were delayed. This has now been fixed.
  • OpManager: Previously, agent data collection files were captured as external files during file integrity scan. This issue is now resolved.
  • OpManager: Previously, IP address changes in agent-monitored end devices were not reflected due to a synchronization issue. This issue is now fixed.
  • OpManager: Resolved an issue where Adaptive Thresholds produced negative expected values. They will now always remain 0 or above.
  • OpManager: An issue that caused failures during Downtime Schedule edit and delete operations in certain MSSQL database environments due to database constraint conflicts was observed. This issue has now been fixed.
  • OpManager: Previously, when using other language keyboards in the RDP window in OPM, the keyboard did not work properly. This issue has now been fixed.
  • OpManager: Previously, there were issues while exporting Performance Monitor graphs as PDF and exporting Script Templates when the display name contained other language characters. This issue has now been fixed.
  • OpManager: The 'Log a Ticket' field names in Japanese for ServiceDesk Plus (on-premises) under OpManager Notification Profile, Notification Template, and Workflow have been updated to align with the corresponding field names in ServiceDesk Plus (on-premises).
  • Enterprise Edition: During upgrades from builds earlier than 128581, the upgrade may fail on probe installations using a remote PostgreSQL database if Downtime Schedules were configured before the upgrade.
  • OpUtils: Previously, from Version 128455, the listDevices API encountered latency when Custom Fields from OpUtils was enabled in Column Choosers. This issue is now fixed.
  • NetFlow: Previously, PDF export functionality was not working as expected in Traffic Pattern Analysis page. This issue has now been fixed.
  • NCM: Previously, when selecting a device or device group while adding or updating a schedule, or during configlet execution, an error was thrown if the selected language was other than English. This issue has now been fixed.
  • NCM: The external third party jar dependency for exporting pdf reports in Japanese, Chinese and Korean languages has been removed.
  • NCM: Previously, the NCM URL in the SDP Cloud ticket description was incorrect. It has now been updated with the correct URL.
  • General : Previously, from version 128540, while performing test action for Freshdesk, issues occurred when company field is enabled. This issue is now resolved.
  • General: Previously, Tomcat's default error page appeared instead of the application's custom error page when an invalid resource was accessed without a proper session. This issue has now been fixed.
  • OpManager: Previously, when SDP-OP was integrated with OpManager, there was an issue where the OS versions were failed to sync. This has now been fixed.
  • OpManager: Previously, when SDP-OP was integrated with OpManager there was an issue with syncing the child CI type devices under Servers or Workstations. This has now been fixed.
  • Firewall: Support ID: 12104317 – An empty report was displayed when accessing Aggregated/RAW Search → Saved Report → View Report if the report name contained Japanese character and dot[.] symbol, due to an XML security restriction. This issue has now been resolved.
  • Firewall: Support ID: 12573456 – A “Deselect All” option has been added under Search → RAW Search → Save Action, allowing users to generate reports using only the selected columns.
  • Firewall: Support ID: 12581026 – The grid search option on the RAW Search → Search Result page, which was previously removed due to internal changes, has now been restored.

Build No 12.8.589- January 13, 2026

Security Fixes

  • General: Previously, a DOM-based XSS vulnerability was identified due to improper handling of message data in HTML. This issue has now been fixed. (Reported by Daniel Santos)
  • OpManager: Previously, a Command Line Injection vulnerability was detected in the Notification Profiles module. This has now been fixed. (Reported by Daniel Santos)
  • OpManager: An XSS vulnerability detected in the Heatmap widget upon enabling 'Show label' has now been fixed. (Reported by Daniel Santos)
  • OpManager: Special characters in device or interface display names are now automatically sanitized and replaced with a hyphen (-) to prevent vulnerability issues.

Issues Fixed:

  • General: Previously, upgrades from base version 12.8.586 or higher were blocked at the precheck phase due to a scheduler-initiated Database Analyzer operation in certain scenarios. This issue has now been fixed.
  • OpManager: Previously, on the IPMI device snapshot page, a redirection issue was observed in the Managing Servers widget. This issue has now been fixed.
  • OpManager: From version 12.8.451 onwards, Operator and Custom Role users, despite having alarm permissions and access to all devices, were unable to perform actions on File Integrity alarms due to an internal error. This issue has now been fixed.

Build 12.8.588 - December 16, 2025

Security Fixes

  • OpManager: Previously, a Stored Cross-Site Scripting (XSS) vulnerability was identified in the description field of the SNMP Trap Processor module. This issue has now been fixed. (Reported by tuannq x ngockhanhc311. Refer CVE-2025-9227)

Issues Fixed:

  • General: Previously, when embedding Widget or NOC views, users faced login failures when trying to access the Device Snapshot page. This has been fixed now.
  • General: In the Alarm tab, the issue with event generation time format across different time zones has been fixed now.
  • OpManager: Previously, software version data for SDP could not be retrieved due to an internal issue. This issue has now been fixed.
  • OpManager: Previously, slowness was observed while accessing the Inventory tab, due to an issue while fetching the applications count. This has now been fixed.
  • OpManager: Previously, from version 128540, the suppression data was fetched in the listDevices and listInterfaces APIs even when the ‘suppressed’ column was not selected in the column chooser under Inventory page. This has now been fixed.
  • OpManager: Previously, Windows Service Down alerts were triggered incorrectly when WMI query execution failed for Windows Agent–monitored devices. This issue has now been resolved.
  • OpManager: Previously, the Windows Agent stopped working during Interface data collection when 64-bit–based data was received. This issue has now been fixed.
  • OpManager: Previously, from version 128539, users experienced a delay while loading a switch’s snapshot page. This issue has been fixed now.
  • OpManager: In device snapshot page, BGP Peers Summary widget graphs failed to export as PDF. This issue has now been fixed.
  • OpManager: From version 12.8.540, if the service was restarted while a Free Disk Space self-monitoring alert was active, the Self Monitoring banner was displayed incorrectly, even when the value was below the configured threshold. This issue has now been resolved.
  • OpManager: Previously, there was an issue with the export folder occupying too much drive space. This issue has been fixed now.
  • OpManager: Previously, software version data for SDP could not be retrieved due to an internal issue. This issue has now been fixed.
  • OpManager: Some devices in OpManager failed to sync to SDP OP when the total number of devices exceeded 1,000. This issue has now been fixed.
  • OpManager EE: Previously, during enterprise upgrades via Settings → Upgrade Manager Settings, service pack transfers to probe services occasionally failed when service packs for both OpManager and the AppManager Plugin were uploaded. This issue has now been fixed, and the changes will take effect during the next service pack upload.
  • OpUtils: Previously, if any VLAN within a trunk port did not have an associated MAC address, the MAC details for the trunk port were not displayed. This issue has been fixed now.
  • OpUtils: For Cisco switch ports, a few MAC addresses were not stored when they were collected from the original community. This issue has been fixed now.
  • OpUtils: Previously, there was an issue with updating router CLI credentials. It is now fixed.
  • OpUtils: Users can now view the Supernet name in the IP Address Manager tree view when the Supernet name is provided.
  • OpUtils: Previously, in version 12.8.567 and above, Reserved IPs were marked as Not Reserved during subnet scans. This issue has been fixed now.
  • OpUtils: Previously, an Out of Memory (OOM) issue occurred during scheduled excel report generation. This issue has been fixed now.
  • OpUtils: Previously, in version 12.8.582, the row background color was missing for some rows in IP Address Manager and Switch Port Mapper. This issue has now been fixed.
  • OpUtils: Previously, in version 128455, there was an issue with creating custom columns in IP Address Manager or Switch Port Mapper that caused issues during backup and restore.
  • NCM: Previously, changes made to configlets were reverted after applying a PPM. This issue has now been fixed.

Build 12.8.585 - August 05, 2025

Issues Fixed:

  • General: From version 12.8.583, the Reset TOTP Secret icon was not displayed on the User Management page for editions other than Enterprise. This issue has been fixed now.
  • OpManager: Previously, hardware widgets were not listed in the Hardware tab for certain devices due to an internal issue. This issue has now been fixed.
  • OpManager: During CSV discovery, the switch and wireless devices failed to add due to an internal issue with the Switch stack discovery process from version 12.8.235. This issue has been fixed now.
  • OpManager: From version 128540, Syslog rules could not be configured to ignore the event. This issue has been fixed now.
  • OpManager: The data unavailability issue in the 'Devices Exceeding N% Disk Utilization' widget has been fixed.
  • OpManager: The UI glitch in the filter option of the Hardware Health Report has been fixed.
  • OpManager: Previously, agent-monitored devices failed to generate Security event log alerts when configured for Audit Success events or Audit Failure events (separately). Both scenarios are now supported.
  • OpManager: The commons-fileupload.jar dependency has been upgraded to version 1.6.0 by the ServiceDesk Plus Cloud team. The necessary changes to support this JAR migration have been implemented in OpManager.
  • Enterprise Edition: From version 12.8.583, POST operations performed via UCV from the Central UI were failed due to an internal cache issue after creating a custom role. This issue has been fixed now.
  • OpManager MSP: From version 12.8.583, internal server error occurred in a dashboard API preventing users from get listed in the Dashboard association page. This issue has been fixed now.

Build 12.8.584 - July 21, 2025

  • General: Previously, upgrade failures occurred in the DB-migrated environment due to a database-related file of the Firewall Analyzer module. This issue has now been resolved.

Build 12.8.583 - July 04, 2025

  • General: Version 3 APIs for Configuration Items (CMDB), Assets, and Relationship Sync, released in ServiceDesk Plus On-Premises version 15100, are now supported in OpManager version 128583.
  • General: Introduced the Emergency Patching feature to automatically download and apply critical fixes for online servers.
  • General: User email addresses are now fetched from Active Directory and automatically assigned to new users created via AD Auto-Login.
  • General: PostgreSQL has been upgraded to version 14.18. The PostgreSQL vulnerability issues from 14.15 have now been fixed.
  • OpManager: Users can now install OpManager on ARM-based linux systems.
  • OpManager: Device Group scope support has now been added for AD Auto-login under Authentication.
  • OpManager: Previously, slowness was observed during upgrades in failover setups due to the large size of the APM Plugin file. This issue has now been resolved.
  • OpManager: Applications Manager Plugin roles can now be configured with Administrator or User privileges via AD Authentication configuration, regardless of the associated OpManager role.
  • Enterprise Edition: Previously, users encountered slowness when switching from the central option to a probe in the Unified Console View(UCV) due to an internal error in some setups. This has now been resolved.
  • NCM: Previously, the upgrade pre-check failed when NCM device template-related tables were missing in the database. This issue has now been fixed.
  • NCM: Previously, users faced an issue with updating the device template from the "Edit device details" option in the device summary page. This has now been fixed.
  • NCM: Previously, under Tools, in the Workflow tab, there was an issue where tasks assigned under the "No" condition were not executed. This issue has now been fixed.
  • NCM: Under Tools, in the Workflow tab, the Reboot System and Shut down System actions that are not required in Network Configuration Manager are now hidden.
  • NCM: In the OpManager NCM add-on, users can now sync device hostnames from OpManager to Network Configuration Manager module.

Build 12.8.582 - June 30, 2025

  • General: Alternate row colouring has been included to improve the readability of grid data.
  • General: When an OpManager customer delicenses OpUtils (limited or none), any subnets and switches exceeding the allowed limit will be automatically deleted. Going forward, IP Management data beyond the license scope will no longer be retained under such licenses.
  • General: Previously, a Stored Cross-Site Scripting (XSS) vulnerability was identified in the IP Address Manager module of OpManager, NetFlow Analyzer, and OpUtils (versions prior to 12.8.582). This issue has now been fixed. (Reported by tuannq x ngockhanhc311).
  • General: Previously, there was a Sensitive Data Exposure vulnerability (Reported by Md Nafeed) due to an inappropriate file in the Google maps/AMap configuration zip files. This has been fixed now.
  • OpManager: OpManager now supports monitoring for a wide range of Unix systems, including macOS, FreeBSD, AIX, Solaris, various Linux distributions, cloud/server and container-based Unix-like operating systems, as well as devices running on ARM processors using Unix Monitoring Agents.
  • OpManager: Adaptive Threshold now supports configuring Suppress and Static Limits, allowing alarms to be suppressed within a specific range and mandatorily triggered when values exceed the defined static threshold.
  • OpManager: Sorting and searching in grids have been improved. The sort icon now appears with improved visibility for a better user experience.
  • OpManager: In OpManager, the Port View tab has been removed from the Cisco ACI SDN device snapshot.
  • OpUtils: Under the Switch Port Mapper module, users can now discover switches from the Cisco ACI.
  • OpUtils: Previously, during a bulk update of switches, the scan options were being modified in the backend even when the scan option was disabled in the UI. This issue has now been fixed.
  • OpUtils: Enhanced the OpUtils Audit section by logging entries for modifications made to Subnets, IPs, and Switches.
  • OpUtils: Previously, IP address conflict alerts were not sent when multiple MAC addresses were linked to a single IP, even when no DHCP server was configured. This issue has now been fixed.
  • OpUtils: Previously, the Port View feature in OpManager (excluding the probe) was empty when the switch had different names in OpManager and OpUtils. This issue has now been fixed.
  • OpUtils: Previously, old interfaces missing from the switch scan (ifTable) remained in the database. This issue has now been fixed.
  • OpUtils: Previously, discovered subnets were not added to the database if a subnet with the same IP but a different mask already existed. This issue has now been fixed.
  • OpUtils: Duplex value is now also collected from the new OID 1.3.6.1.2.1.10.7.2.1.19 for Cisco switches.
  • OpUtils: Previously, users encountered an issue with lease count and lease discovery on Linux DHCP servers. This has now been resolved.
  • OpUtils: Previously, the scheduled Excel report had issues opening in Microsoft Excel and also displayed missing data. These problems have now been resolved.
  • OpUtils: Previously, there was an issue with DHCP lease count and exclusion handling for Fortinet devices. This issue has now been fixed.
  • OpUtils: Previously, users faced some issues while exporting the list of trusted devices from the Rogue Detection module. This issue has now been fixed.
  • OpUtils: Previously, an admin could not edit another admin’s scope. This issue has now been fixed.
  • OpUtils: Previously, users faced an issue where interfaces could not be fetched in Bandwidth Monitor due to snmpGet failures. This issue has now been resolved.
  • OpUtils: Previously, in the Port tab of the Switch Port Mapper module, sorting the 'Device Type' or 'Logged On User' columns caused the grid to appear empty. This issue has now been resolved.
  • OpUtils: Previously, in the Switch Port Mapper module, changes made to a port's physical location were not reflected. This issue has now been resolved.
  • NetFlow: Percentile data is now displayed in Access Point, Access Point Group, and SSID Group snapshot pages for improved performance visibility.
  • NetFlow: Percentile-based reports are now supported for WLC (Wireless LAN Controller) devices, including support for scheduled reports.
  • NetFlow: NetFlow Analyzer now supports integration with Splunk using the UDP protocol, enabling the forwarding of audit and access logs.
  • NetFlow: NetFlow Analyzer can now integrate with any SIEM tool using the UDP protocol, allowing audit and access logs to be transmitted seamlessly.
  • NetFlow: NetFlow Analyzer is now integrated with PagerDuty, enabling automatic creation of alerts/events from network alarms for streamlined incident management.
  • NetFlow: Support IDs: 11198892, 11224670, 10628307, 10627282 - An issue causing false alarms for unprocessed UDP packet counts (Self-Monitoring Alarm) has been resolved.
  • NetFlow: Support IDs: 11317804, 11235953 - A false alarm related to raw data file count (Self-Monitoring Alarm) has been fixed.
  • Firewall: SupportID : 11126963 - NAT Rules support is now available for CheckPoint firewalls under Rule Management 'Overview' reports.
  • Firewall: Firewall Analyzer now integrates with Splunk using the UDP protocol, allowing audit and access logs to be forwarded.
  • Firewall: Firewall Analyzer now integrates with any SIEM tool using the UDP protocol, allowing audit and access logs to be forwarded.
  • Firewall: Firewall Analyzer integrates with PagerDuty to streamline alert management by automatically creating PagerDuty alerts/events from network alerts.
  • Firewall: SupportID : 11157413: A parsing issue occurred in Check Point device rules. This issue has been resolved.
  • Firewall: SupportID : 11126963: A parsing issue occurred in Check Point device rules that affects Rule Suggestion and Policy Fine tuning reports. This issue has been resolved.

Build 12.8.581 - June 24, 2025

  • General: Previously, page navigation footer was not visible in some of the grid widgets in the NOC view. This issue is now fixed.
  • General: Previously, real-time widgets appeared blank for the first time when embedded, but loaded properly after a refresh. This issue has now been resolved.
  • General: Implemented login password encryption during data transit to enhance security.
  • OpManager: Users can now schedule downtime based on specific timezone, using the 'Select TimeZone' option ensuring accurate downtime scheduling across different locations.
  • OpManager: New actions have been added under Discovery Rule Engine, allowing users to add uplink dependency, associate templates, workflows, and downtime schedules, and configure alarm suppression and monitoring intervals.
  • OpManager: Previously, users faced issues activating the 30-day evaluation for the IP Address Manager and Switch Port Mapper add-ons in NetFlow Analyzer and OpManager Essential and Enterprise editions. This issue has now been resolved.
  • OpManager: The following graphs have been revamped for better user experience: Availability (Device, Interface, URL, WAN IP, Windows Service, Application Service), At-a-Glance Report, Bandwidth Report, Process Monitor, and Service Monitor.
  • OpManager: The option to enable or disable monitoring access for users is available under User Management
  • OpManager: Previously, certain Configuration Management fields were missing from the device snapshot page. This issue is now fixed.
  • OpManager: Routing neighbours of OSPF, EIGRP and IS-IS protocols, along with routing tables and their flapping count will now be monitored.
  • OpManager: Introducing Lite device licensing. This license covers access points, URL monitors, WAN IPs, Network Path Analysis and devices monitored for basic availability.
  • OpManager Plus: Introducing Lite device licensing. This license covers Access Points, WAN IP monitors, Network Path Analysis and devices monitored for basic availability.
  • OpManager: WAN IP monitoring is now supported. Users can monitor the availability, packet loss, response time, SLA for WAN IPs across sites.
  • OpManager: Network Path Analysis now supports adding and monitoring up to 100 paths in a single instance.
  • OpManager MSP: Network Path Analysis is now supported in the OpManager's MSP Edition.
  • OpManager: The UCS inventory data update process has been optimised for better performance.
  • OpManager: The character limit for the VMware NFS datastore remote path is increased to accommodate larger values.
  • OpManager: In rare cases, during Nutanix inventory update process, the IPs that already existed were again attempted for discovery. This issue has now been resolved by skipping those IPs during discovery.
  • OpManager: During device sync between probe and central, the virtual device details are now included.
  • OpManager: The description of the 'CPU Utilization' Xen Server host monitor has been updated for improved clarity.
  • OpManager: The default list of VMware Events linked to the VMware parent device has been modified.
  • OpManager: Introduced a new macro '$POLLINGSERVER' for virtual monitors (VIWebservice, VIWMI, Prism API, XenService) to replace the server name used to collect the monitors' data.
  • OpManager: Previously, users faced issues with redirection to the Xen Pool snapshot when navigating from the Grid view. This issue is fixed now.
  • Enterprise Edition: Users can now configure downtime schedule directly from the Central, enabling unified management of schedules for all the probes.
  • Enterprise Edition: The probe login access can now be configured for user accounts on the Central Server, even when Unified Console View (UCV) is disabled.
  • OpManager MSP: In Central, the Global search was showing duplicate entries for devices. This issue has now been resolved.

Build 12.8.580 - June 13, 2025

  • OpManager: OpManager enables users to manage CLI monitor commands directly from the UI—choose from available commands or define new ones to align with your specific network monitoring needs.
  • OpManager: OpManager now supports the creation of Custom CLI Monitors, facilitating enhanced monitoring of CLI-based devices with performance indicator tracking over Telnet/SSH.
  • OpManager: Previously, email IDs and phone numbers configured in Alarm Escalation were not displayed in the PII Search. This issue has now been fixed.
  • OpManager: Users can now disable specific traps for individual devices from the SNMP Trap Processor page.
  • OpManager: Users can now configure threshold for packet loss, response time, Rx/Tx Traffic for the WAN links of Meraki Security (MX) devices to generate alerts.
  • OpManager: Meraki MT sensors will now be automatically monitored as part of the Meraki controller device discovery process.
  • OpManager: Memory Utilization monitors monitoring is now supported for Meraki devices via REST API.
  • OpManager: CPU utilization monitoring is now supported for Meraki wireless devices (MR) via REST API.
  • OpManager: Sysuptime monitoring is now supported for Meraki Switches (MS) via REST API.
  • Enterprise Edition: Previously, when a probe request timed out in OpManager’s Central Unified Console View, a generic error message, "Internal Server Error," was shown. This has now been fixed, and appropriate response messages will be displayed instead.
  • Enterprise Edition: In some cases, applying a license file with modified line endings in Central triggered an Out Of Memory (OOM) issue in Central. This issue has now been fixed.
  • Enterprise Edition: Previously, archive file transfers between Central and Probe failed when Failover was configured on Probe with a shared folder and running on a remote PostgreSQL database. This issue has now been fixed.
  • Enterprise Edition: Previously, a path traversal vulnerability (ZVE-2025-3008 Reported by Zewei Zhang) was detected during file transfers between Central and Probe. Path sanitization has now been implemented to fix this issue.
  • General: OpManager integrated with PagerDuty to streamline alert management by automatically creating PagerDuty alerts/events from network alerts.
  • General: Previously, from version 128453, in some cases, new tickets were created in SDP On premise instead of updating the existing ticket, this issue is fixed now.
  • General: From versions 128567, OpManager integrates with Splunk using the UDP protocol, allowing audit and access logs to be forwarded. This is now supported in NetFlow and Firewall Analyzer.
  • General: From versions 128567, OpManager integrates with any SIEM tool using the UDP protocol, allowing audit and access logs to be forwarded. This is now supported in NetfFlow and Firewall Analyzer.

Build 12.8.570 - July 09, 2025

  • General : Previously, a Stored Cross-Site Scripting (XSS) vulnerability was identified in the IP Address Manager module of OpManager, NetFlow Analyzer, and OpUtils (versions prior to 12.8.582). This issue has now been fixed. (Reported by tuannq x ngockhanhc311).
  • General : Previously, there was a Sensitive Data Exposure vulnerability (Reported by Md Nafeed) due to an inappropriate file in the Google maps/AMap configuration zip files. This has been fixed now.
  • OpUtils : DHCP MAC Filtering and DHCP Reservation features are now implemented using environment variables during PowerShell script execution.

Build 12.8.569 - June 18, 2025

  • General: Previously, from version 128453, in some cases, new tickets were created in SDP On premise instead of updating the existing ticket, this issue is fixed now.
  • Enterprise Edition: Previously, a path traversal vulnerability (ZVE-2025-3008 Reported by Zewei Zhang) was detected during file transfers between Central and Probe. Path sanitization has now been implemented to fix this issue.
  • NetFlow: Resolved an issue where cloud service auto-updates failed in MSSQL databases.

Build 12.8.568 - May 30, 2025

  • General: Previously, when users added test credentials from discovery, the filter option did not work as intended.This issue is fixed now.
  • OpManager MSP: Users with the necessary permissions can now share their dashboards with other users.
  • Firewall: Support ID: 10497337 - Added support for bulk Device-Rule configuration using the Credential Profile option.
  • Firewall: Support ID: 11019707 - Introduced virtual device addition option in the Manual Device Add feature.
  • Firewall: Support ID: 10407268 - New device support: mGuard Firewall version 8.2.2.
  • Firewall: Support ID: 10955008 - New device support: A10 Proxy - Device Model: TH1040S, OS/Version: 5.2.1-P6, Build 74.
  • Firewall: Support ID: 10796795 - Introduced policy-based rule group support for Sophos XG firewalls.
  • Firewall: Support ID: 10340135 - Credential Profile-based device rule addition now supported in API mode.
  • Firewall: Support ID: 11126963 - Added support for nested group details on the Object Overview page.
  • Firewall: Support ID: 11126963 - Added inline rule number support for Check Point firewalls.
  • Firewall: Support ID: 11126963 - Rule names replaced with rule numbers for Check Point firewalls using custom parameter-based handling.
  • Firewall: Support ID: 11126963 - Upcoming scheduled changes are now displayed on the Device Rule List page.
  • Firewall: Support ID: 11126963 - Added support for all object types in Check Point firewalls on the Object Overview page.
  • Firewall: Support ID: 11126963 - Added VPN column support to the Policy Overview page for Check Point firewalls.
  • Firewall: Support ID: 11019707, 11012115 - Changes made to skip pager command execution based on custom options.
  • Firewall: Support ID: 10845235 - Security Audit Report can now be generated in a custom language.
  • Firewall: Support ID: 10955305 - L2TP VPN Report now supported for Zyxel (ZyWALL) firewall.
  • Firewall: Support ID: 10955305 - URL Report now supported for Zyxel (ZyWALL) firewall.
  • Firewall: Support ID: 10906449 - Support added for a new type of SSLVPN syslog for Huawei firewalls.
  • Firewall: Availability Alert Edit Option - Edit option added for Availability Alert in both Firewall Analyzer Standalone and Enterprise Probe installations.
  • Firewall: Collector Availability Alert Edit Option - Edit option added for Collector Availability Alert in Firewall Analyzer Enterprise Central installations.
  • Firewall: Support ID: 10723523 - Device rule actions were failing due to trailing spaces in Cisco Meraki network names. This issue has been fixed.
  • Firewall: Support ID: 10978763 - A parsing issue occurred in SonicWall device rules. This issue has been resolved.
  • Firewall: Support ID: 10109602 - CLI-based device rule failures were observed for F5 devices. This issue has been fixed.
  • Firewall: Support ID: 10885982 - Manual rule comparison report generation was failing. This issue has been resolved.
  • Firewall: Support ID: 10819761 - Credential validation failures were occurring on the Rule Administration page. This issue has been resolved.
  • Firewall: Support ID: 10906449 - Parsing issues were encountered in Huawei device rules. This issue has been resolved.
  • Firewall: Support ID: 10998446 - Check Point device rule REST API access was failing when the rule count exceeded 500 in access layers. This issue has been fixed.
  • Firewall: Support ID: 10913604 - Duplicate rule names with case-sensitive variations were resulting in extra rules being listed on the Policy Overview page. This issue has been fixed.
  • Firewall: Support ID: 11126963 - An object count mismatch was observed in Check Point devices. This issue has been fixed.
  • Firewall: Support ID: 11184967 - Interface addition was failing on the Standard Reports - Network Details page when the combined interface name length exceeded 500 characters. This issue has been resolved.
  • Firewall: Support ID: 10913604 - Discrepancies were observed in Used Services and Unused Interfaces data in the Security Audit Report for FortiGate devices. This issue has been resolved.
  • Firewall: Support ID: 10979422 - Rule fetching based on the config file was not working for Cisco VDOM cases. This issue has been resolved.
  • Firewall: Support ID: 10990804 - FortiGate config parsing was failing when rule comments spanned multiple lines. This issue has been fixed.
  • Firewall: Support ID: 10522039 - Minor parsing issues were found in Barracuda configs. These issues have been resolved.
  • Firewall: Support ID: 10747482 - Missing interfaces for FortiGate VDOMs were not showing on the Rule Administration page. This issue has been fixed.
  • Firewall: Support ID: 10814806 - Data issues were affecting Checkpoint Policy Optimization report generation. This issue has been resolved.
  • Firewall: Support ID: 10661869 - The database query used to fetch bidirectional rules in MSSQL was malfunctioning. This issue has been resolved.
  • Firewall: Support ID: 10358852, 10121664 - Cisco config fetch was failing during scheduled runs. This issue has been fixed.
  • Firewall: Support ID: 10341458 - Huawei config parsing failed when processing interface details. This issue has been fixed.
  • Firewall: Support ID: 10642955 - Rule descriptions were not displayed correctly in the Unused Rules Report for Palo Alto devices. This issue has been resolved.
  • Firewall: Support ID: 10340135 - On-demand Security Audit Report generation for Cisco Routers was failing. This issue has been resolved.
  • Firewall: Support ID: 10908128, 10973259 - Cisco Firepower firewalls were sending two different syslog formats, causing processing delays. This issue has been resolved.
  • Firewall: Support ID: 10911895 - Logout syslog ID "199017" for Cisco Firewall was not handled. This issue has been resolved.
  • Firewall: Support ID: 10982072 - A syslog parsing issue occurred in Checkpoint Firewall. This issue has been resolved.
  • Firewall: Support ID: 6079521 - The on-demand Config Analysis Report option was incorrectly present on the Device Rule List page. It has now been removed, as it is included in the Security Audit Report. This issue has been resolved.

Build 12.8.567 - May 30, 2025

  • OpManager: Previously, the active clients data were not fetched for H3C WLC devices due to inappropriate OID. This issue has been fixed now.
  • OpManager: Previously, data collection for access points failed due to duplicate instances added in performance monitors. This issue has now been fixed.
  • OpManager: New device template for WLC device model ‘Aruba IAP-615’ has been added.
  • OpManager: Henceforth, whenever an SSID is being added or removed in the WLC environment, the changes will be automatically updated in the respective WLC snapshot page.
  • OpManager: Henceforth, when an Access Point is removed from a WLC with High Availability (HA) configured, an alert will be raised, and the access points will be marked as ‘Removed’. These access points can be either unmanaged or deleted automatically based on the user configuration.
  • OpManager: Previously, the WLC devices, Huawei AC6508 and Aruba 7240 XM were added as switches during WLC discovery. This issue has now been fixed.
  • OpManager: Around 1800 new device templates have been added to enhance support for a wider range of device models during discovery.
  • OpManager MSP: Previously, the inventory page appeared blank for business view scope users when selecting the 'All Customers' filter in MSP Central. This issue has now been fixed.
  • OpManager: Access Point removal is now handled for WLCs with HA enabled. When an AP is removed from a WLC in HA mode, an AP removal alert will be triggered, and the AP will be marked as 'Removed'. This can be filtered under WLC Snapshot under Access Point tab.
  • OpManager: Previously, there was an issue in Central where the Rogue SSID related files sent from the Probes weren't getting deleted after processing. This issue has now been resolved.
  • General: An issue prevented devices from being highlighted during device association. This behavior was observed in the latest Chrome browser and has now been fixed.
  • OpManager: OpManager now integrates with Splunk, an SIEM tool using the UDP protocol, allowing audit and access logs to be forwarded.
  • OpManager: OpManager now integrates with any SIEM tool using the UDP protocol, allowing audit and access logs to be forwarded.
  • OpManager: OpManager now supports integration with PAM360 to automatically synchronize Windows and Linux credentials for monitoring.
  • OpManager: From versions 12.8.540, availability-related alarms were affected for Meraki and WLC devices monitored via REST API. This issue has now been fixed.
  • OpManager: Previously, the "Last Polled Value" alarm variable was not replaced with the actual value in the message field of the Notification Profile. This has been fixed now.
  • OpManager: Previously, users with custom role having 'Maps-Read' permission, were unable to view the Layer2 Maps. This issue has now been fixed.
  • OpManager: Hardware monitoring support has now been introduced for Lenovo XCC type servers.
  • OpManager: Extended the IPMI monitoring support to include Lenovo xClarity devices using SNMP.
  • OpManager: Previously, some alarm criteria which are available to be configured in notification profile were not available for workflows. This issue has now been fixed
  • OpManager: The new Devices Summary report under Inventory displays the count of monitored devices across multiple categories.
  • OpManager: In Advanced Reports, Last Polled Value type has been added to display the most recent values of performance monitors.
  • OpManager: String monitors are now added as a new column group in Advanced reports.
  • OpManager: During CSV discovery, the 'Device Type' and 'Display Name' values specified in the CSV file were not applied to non-SNMP devices due to an internal issue that existed from 128456 version. This has now been fixed.
  • OpManager: Previously, there was a mismatch between availability properties (status, state, etc.) and availability alarms for devices. This mismatch has now been fixed.
  • OpManager: Henceforth, when the availability polling queue size is exceeded, an alert will be generated to notify the users.
  • OpManager: Previously, devices categorized as Linux servers in OpManager were synced under the Windows Server class in ServiceNow. This issue has been fixed and now it will sync under Linux server class of ServiceNow.
  • OpManager: In the Japanese version, the "File Modification" alarm threshold message incorrectly began with "Folder monitor" instead of "File monitor." This issue has now been fixed.
  • OpManager: Real Time graph on the device snapshot page failed to load when switching between browser tabs or restoring a minimized window. This issue has now been fixed.
  • OpManager: In MSSQL setup, larger threshold values caused some devices to be missing from the "Threshold Details of Devices" report. This issue has been fixed now.
  • OpManager: Due to a delay in closing the vSAN connection , the VMware data collection remained active for an extended period of time. This issue has been fixed now.
  • OpManager: Introduced an alternative WMI counter—Percent Processor Utility—for monitoring WMI CPU utilization metrics.
  • OpManager Storage Monitoring: Introducing support for NetApp E-Series devices via REST API.
  • OpManager Storage Monitoring: Introducing support for Lenovo DG Series and Lenovo DM Series storage devices via REST API.
  • OpManager: Users can now view the Wireless LAN Controller (WLC), Meraki, Cisco-ACI, SDWAN and Stack-switch devices in the Organization map.
  • Enterprise Edition: Previously, when the parent device was down, duplicate notifications were sent from Probe to Central for the child entities. This has been fixed now.
  • Enterprise Edition: From versions 12.8.540, there was an issue with Essential to Enterprise Edition migration for standalone setups using an MSSQL database. This issue has now been fixed.
  • Enterprise Edition: From 128553, the Groups settings were not fetched properly in Probe due to an internal issue. This issue has now been fixed.
  • Enterprise Edition: Previously, users were unable to save the business view when the default device icon was changed. This issue occurred while selecting a probe in the Unified Console view, and is fixed now.
  • Enterprise Edition: During certain instances of Central-Failover switch, the Probe lost communication with Central and failed to reconnect automatically. This issue has now been fixed.
  • Enterprise Edition: The upgrade pre-check failed for setups migrated from Standalone versions later than 12.7.257 on MSSQL databases. This issue has now been fixed.
  • OpManager Plus EE: New Device and Interface reports are now integrated into the Central server of OpManager Plus Enterprise Edition.
  • OpManager MSP: Previously, the Inventory page in MSP Central was empty for custom admin or operator users when the 'All Probes' filter was selected. This has been fixed now.
  • OpManager MSP: Previously, in MSP Central, an unwanted error banner appeared because "InDepth Data Comparison" and "Count Comparison" were incorrectly listed under Diagnostics. These tabs have now been removed.
  • OpManager MSP: In the Notification Profile, when using the "Filter Devices by Customer" option, VMware datastores from other customers were displayed instead of selected customer. This issue has been fixed now.
  • OpUtils : Previously, ARP data could not be fetched from Palo Alto devices using CLI credentials. This issue has been fixed now.
  • OpUtils : Previously, users faced an issue while importing a switch using a CSV file. This issue has now been fixed.
  • OpUtils : Users can now edit the Subnet Mask field while modifying existing subnets in IP Address Manager.
  • OpUtils : A preview page for subnet import now lets users review requests before finalizing the import action. Additionally, users can now import custom columns at the subnet level using the Import Custom Column option.
  • OpUtils : Previously, there was an issue with displaying the TraceRoute responses. This issue has now been resolved
  • OpUtils : Previously, there was an issue with the Ping status being displayed incorrectly. This issue has now been fixed.
  • OpUtils : A preview page for Import IP Details has been introduced, allowing users to review their inputs before proceeding with the import action.
  • OpUtils : Users can now update the reservation status of IPs using the Import IP Details option.
  • OpUtils : A new column has been added to display the source from which the subnet was discovered.
  • OpUtils : 'Waiting In Queue’ status has been introduced in Switch scan.

Build 12.8.566 - May 26, 2025

  • General: Henceforth, users will be redirected to the License Apply page when a Subscription license expires.
  • General: Previously, a XSS vulnerability was detected on the login page. This issue has now been resolved. (Reported by Andrey Alekseev - Positive Technologies. Refer CVE-2025-41437)
  • General: An issue with Windows Product Installer that could potentially lead to local privilege escalation due to a third-party component (CVE-2023-29080), has been fixed by updating it to the latest version.
  • General: An issue prevented devices from being highlighted during device association. This behavior was observed in the latest Chrome browser and has now been fixed.
  • OpManager: In versions 12.8.524 and above, there was an issue with triggering notifications for Clear Alarm in delay-configured profiles. This issue has now been fixed
  • OpManager: Previously from version 12.8.451, internal server error occurred while deleting custom widget from widgets list page. This issue is now fixed.
  • Enterprise Edition: Previously, in setups migrated from Standard/Professional to Enterprise having an MSSQL database backend, the Upgrade Manager page did not display the service details. This issue has now been fixed.
  • Enterprise Edition: In Central versions 12.8.401 and above, when the "Probe Down" criterion was selected, the Delay and Recurring notifications were not triggered or displayed in the UI. These issues have now been resolved.
  • OpManager MSP: Previously, there was a blank slide issue while using the Test Action on the Alarms page in Central has been fixed.

Build 12.8.555 - May 20, 2025

  • General: An issue prevented devices from being highlighted during device association. This behavior was observed in the latest Chrome browser and has now been fixed.
  • General: Previously, a XSS vulnerability was detected on the login page. This issue has now been resolved. (Reported by Andrey Alekseev - Positive Technologies. Refer CVE-2025-41437)
  • OpManager: From versions 12.8.540, availability-related alarms were affected for Meraki and WLC devices monitored via REST API. This issue has now been fixed.
  • OpManager: Previously from version 12.8.451, internal server error occurred while deleting custom widget from widgets list page. This issue is now fixed.
  • Enterprise Edition: From versions 12.8.540, there was an issue with Essential to Enterprise Edition migration for standalone setups using an MSSQL database. This issue has now been fixed.
  • Enterprise Edition: Previously, users were unable to save the business view when the default device icon was changed. This issue occurred while selecting a probe in the Unified Console view, and is fixed now.
  • Enterprise Edition: Previously, in setups migrated from Standard/Professional to Enterprise having an MSSQL database backend, the Upgrade Manager page did not display the service details. This issue has now been fixed.
  • Enterprise Edition: The upgrade pre-check failed for setups migrated from Standalone versions later than 12.7.257 on MSSQL databases. This issue has now been fixed.
  • Enterprise Edition: From 128553, the Groups settings were not fetched properly in Probe due to an internal issue. This issue has now been fixed.

Build 12.8.554 - May 05, 2025

  • OpManager: Performance and Virtualization widgets now support threshold severity color indicators based on configured thresholds, with an option to disable the color bar display.
  • OpManager: The 'Total Disk Space in GB' monitor has been introduced for devices monitored via WMI and CLI protocols to display individual partition sizes.
  • Enterprise Edition: The Quick Configuration Wizard now enables bulk threshold configuration on the central server as well.

Build 12.8.553 - April 25, 2025

  • General: A new Severity filter option has been introduced in the infrastructure widget.
  • General: Previously, the Time Window/Business Hour Rule was greyed out for 'Last 30 Days' in reports. This issue has now been fixed.
  • General: Group Settings page has been enhanced for improved usability.
  • General: The tooltips for devices in Rack View, Organization Map and Network Path analysis have been enhanced for improved usability.
  • General: Previously, when resizing the Rack and CCTV widgets, the Rack view did not fit properly. This issue has now been fixed.
  • OpManager: Users can now create multiple graphs as widgets within a single dashboard using the Graphical widget feature.
  • OpManager: An option to edit the integrated reports has been provided.
  • OpManager: Henceforth, users can get alerts for Meraki MX device uplink availability.
  • OpManager: During Meraki controller rediscovery, if any existing device is not discovered in two consecutive rediscovery actions, it will be marked as 'Removed'.
  • OpManager: Users can now fetch up to 5000 Access Points (APs) during Wireless LAN Controller (WLC) discovery, and advanced monitoring will be automatically enabled for 2500 of them.
  • OpManager: Users can view the device availability status (as seen in the Meraki console dashboard) in the All devices tab, under the Meraki Controller Snapshot once REST API availability monitoring is enabled.
  • OpManager: Support for the Meraki Z-Series devices has been introduced.
  • OpManager: Users can now add Meraki controllers from different domains like, api.meraki.com or api.meraki.cn.
  • OpManager: Previously, in version 128540 and above, users faced issues with saving the Log a Ticket notification profile, immediately after first login. This has been fixed now.
  • OpManager: In versions 128456 and later, devices discovered via CSV did not have custom fields and groups populated. This issue has now been resolved.
  • OpManager: Introduced an option to view configured thresholds for monitors under Settings → Configuration → QCW → Threshold Settings → Performance Monitors.
  • OpManager: The "!=" (not equal to) threshold condition is now supported under Device Snapshot → Monitors → Process Monitors and Settings → Monitoring → Process Template.
  • OpManager: In Meraki Organization Summary report, Number of Meraki Radio devices were shown without Meraki CW series from 128264. This issue has been fixed now.
  • OpManager: In Meraki Uplink, Graphs were unable to view due to an internal issue from 128298. This issue has been fixed now.
  • OpManager: Tooltips have been enhanced for devices in Rack View, Organization Map, and Network Path Analyzer.
  • OpManager: Previously, there was a display size issue in Rack view wiget and CCTV. It has been fixed.
  • OpManager: SSID and Client tabs are now hidden in the WLC snapshot page when the count is zero.
  • OpManager: Previously, an issue with the search option in Windows Service Monitors on the Settings > Monitoring > Windows Service Monitoring page. This issue has been resolved.
  • OpManager: Previously, an issue that occurred when editing a Performance Monitor with a comma in its name has now been fixed.
  • OpManager: Introduced monitoring support for the latest versions of Windows 11 devices via the SNMP protocol in OpManager.
  • OpManager: Previously, an issue preventing access to the Device Snapshot -> Monitors page due to a stale entry in the Eventlog mapping table.This issue has now been fixed.
  • OpManager: Previously, if a device was configured with Custom Integration and had a severity of 'Service Down', a notification would not be triggered. This issue has now been fixed.
  • OpManager: Previously, incident/event id's or unique identifiers were only replaced in the URL when updating, closing, or reopening an incident via Custom Integration. This is now supported in the body content as well.
  • OpManager: Previously, the alarm created date was sent from OpManager to MS Teams when sending a message. Now, the alarm generated date will be sent instead.
  • OpManager: Previously, in Custom Integration, ticket creation failed in certain scenarios when updating ticket settings. This issue has now been fixed.
  • OpManager: Previously, from version 128264, the Meraki CW series was not included in the total count of Meraki Radio devices. This issue has now been fixed.
  • OpManager: From version 128298, there was an issue with viewing graphs in the Meraki MX > WAN Link widget. This issue has now been fixed.
  • OpManager: In certain rare scenarios with high workflow activity, there was an issue with workflow log generation. This has now been addressed and fixed.
  • OpManager: Android notifications used to fail if the hourly authkey refresh encountered a connection error, due to the absence of a retry mechanism. This has now been resolved.
  • OpManager: In some cases, failure audits for VIWebService monitors were not recorded. This has now been addressed and fixed.
  • OpManager: A comprehensive Capacity Planning Dashboard has been introduced, featuring interface and device-related widgets such as Overall Utilization Summary, Forecast Recommendation Alerts, and Device/Interface Trend insights, built on the Capacity Planning Reports framework.
  • OpManager: Monitoring Forecast Trend report is now available for up to 90 days, an extension from the previous limit of 14 days.
  • OpManager: Users can now modify, enable, and disable Forecast Alert Rules.
  • OpManager Storage Monitoring: Previously, when HPE MSA disks were in spare state, a false alert was raised . This has been fixed now.
  • OpManager Storage Monitoring: Previously, EMC Isilon storage capacity values were displayed incorrectly. This issue has now been fixed.
  • OpManager Storage Monitoring: Previously, Dell PowerStore latency performance metric values were shown in microseconds instead of milliseconds. This issue has now been fixed.
  • Enterprise Edition: In Central, a new option has been added under Settings → Configuration → QCW → Threshold Settings to apply thresholds for Performance Monitors across multiple devices.
  • Enterprise Edition: Previously, in rare cases where probes had no devices, a data processing slowness alarm was incorrectly triggered. This issue has been resolved.
  • OpManager MSP: In MSP editions from version 12.6.306 onward, an issue in MSP Central caused the "License limit exceeded" banner to appear by default when selecting a probe from the dropdown, even if the licensing model was disabled. This has now been fixed.
  • Firewall: Enhanced the syslog processing of the Check Point Firewall to improve performance.

Build 12.8.552 - April 16, 2025

  • OpManager: Flow Analysis module now supports integration with Advanced Reports.
  • OpManager: Autonomous System data from Flow Analysis module is now included in OpManager's BGP monitoring.
  • OpManager: Network Path Analysis now displays Autonomous System information and geolocation details.
  • Enterprise Edition: Previously, in the Essential to Enterprise migrated setup, users were unable to retrieve the interfaces for the destination device while creating links in a business view. This issue has now been fixed.
  • OpManager : Improved accessibility by repositioning the Report List dropdown in the Firewall Reports section of OpManager.

Build 12.8.551 - April 15, 2025

  • General: The SAML authentication is now supported in the mobile apps, allowing users to login with secure Single Sign-On (SSO).
  • General: Previously, the Subnet Mask was optional, it is now mandatory during Virtual IP-based Failover configuration and can be modified from the UI on the Failover Architecture page.
  • General: Failover support has been extended to different domains as well as workgroup machines.
  • General: Custom HTML widgets now require user consent before rendering, to prevent unauthorized scripts from accessing sensitive data. [Reported by: Maneesh]
  • General: Previously, there was an XSS vulnerability in the custom menu tabs functionality. This has been fixed now
  • General: Previously, a server error occurred when modifying the default port in an AD domain and updating the domain's group. This error has now been fixed.
  • General: Previously, there was an issue where the update actions of users with custom roles on the Central server were not properly synced with the Probes. This issue has now been fixed.
  • General: A measure has been implemented to keep the WebSocket connection alive and recover from connection closures caused by network inactivity or latency, aiming to eliminate unexpected disconnections.
  • General: Users can now choose to display selected dashboard widgets in a graphical format for better visualization.
  • General: Apache Tomcat has been updated to enhance security.
  • General: Previously, a path traversal vulnerability was detected in OpManager's search logs. This has been fixed now.
  • General: Previously, logs intended to remain hidden were showing up in search results. This issue has been resolved and such logs are now excluded.
  • OpManager: Introducing an option to remove Failover configuration using a script file for standard editions.
  • OpManager: Previously, in version 128401 and above, 'Delay and Recurring notifications' was not triggered for URLs. This has now been fixed.
  • OpManager: From version 128451 and above, the Data Collection Error Logs report failed to display data due to an internal error. This issue has now been resolved.
  • OpManager: From version 128451 and above, the Business View associated with Autologin for all users was not displayed correctly due to an incorrect response. This issue has now been fixed.
  • Enterprise Edition: From version 128551, if the first startup fails in a Probe for a licensed customer, subsequent startups will be restricted, and the product will enter Maintenance mode.
  • Enterprise Edition: Previously, users faced an issue while enabling OpUtils in AD authentication within OpManager Central. This issue has now been resolved.
  • OpManager MSP: Previously, MSP customer names were limited to just 20 characters. This has now been increased to allow names with up to 50 characters.
  • OpManager MSP: Previously, navigating from the device snapshot page in MSP caused the probe dropdown to become locked or disabled on subsequent pages. This issue has been resolved.

Build 12.8.545 - December 04, 2025

Issues Fixed:

  • General: Previously, from version 128540, while performing test action for Freshdesk, issues occurred when company field is enabled. This issue is now resolved.
  • General: A valid information message is now displayed when a PDF report export fails.
  • General: There was an issue in fetching the Groups under Notification profile -> Log a ticket for SDP MSP versions over 14850, 14940 and above as V1 API is deprecated. This issue has been fixed now by supporting the V3 API. Please refer to the compatibility document.
  • OpManager: Some devices in OpManager failed to sync to SDP OP when the total number of devices exceeded 1,000. This issue has now been fixed.
  • OpManager: IPSLA Monitor Status was not synced to the Central Server due to an internal issue. This issue has now been fixed.
  • OpManager: The external third party jar dependency for exporting pdf reports in Japanese, Chinese and Korean languages has been removed.
  • OpManager: Previously some of the fields in Advanced Reports were not translated. This issue has been fixed.
  • OpManager: Previously, some reports were generated as PDF even when XLS was selected. This issue has now been fixed.
  • OpManager: In certain cases, notes were being added to already closed SDPOP requests. This issue has now been fixed.
  • OpManager: Previously, in rare cases, an Out of Memory (OOM) issue occurred during CI sync when ServiceNow was configured in OpManager. This issue has now been fixed.
  • OpManager: Previously, a false alert was generated when a device metric value changed from empty to its original value. This issue has now been resolved.
  • OpManager: Previously, there was an issue fetching the serial number of Cisco switch stack devices on the Device Summary page. This issue has now been fixed.
  • OpManager: Previously, the device serial number was displayed incorrectly when it contained only numeric characters due to a data type issue. This issue has now been resolved.
  • OpManager: Previously, software version data for SDP could not be retrieved due to an internal issue. This issue has now been fixed.
  • OpManager: Previously, the Service monitor availability report was previously exported in .xls format instead of .xlsx. This issue has now been fixed.
  • OpManager: Previously, there was an issue exporting the Down Statistics PDF report (under Device Snapshot > Availability Dial). This issue has now been fixed.
  • OpManager: The issue with performing the Traceroute action from the Inventory or Device Snapshot page has been resolved.
  • OpManager: Updating subnet display names with Japanese characters resulted in garbled text. This issue has now been fixed.
  • OpManager: Previously, racks in the Rack View widget appeared smaller in the NOC view. This issue has been fixed now.
  • OpManager: The Topology map in the Stack Switch snapshot page appeared broken when source switch information wasn’t fetched correctly for stack ports. This issue has been fixed.
  • OpManager: Previously, when a monitoring agent was reinstalled, its status was incorrectly set to "Uninstalled". This issue has now been fixed.
  • OpManager: Previously, agent data collection files were captured as external files during file integrity scan. This issue is now resolved.
  • OpManager EE: Previously, the IPSLA Monitor status was not syncing with the Central Server due to an internal issue. This has now been fixed.
  • OpManager EE: Previously, during enterprise upgrades via Settings -> Upgrade Manager Settings, service pack transfers to probe services occasionally failed when service packs for both OpManager and the AppManager Plugin were uploaded. This issue has now been fixed, and the changes will take effect during the next service pack upload.
  • OpManager: Previously, when resizing the Rack and CCTV widgets, the Rack view did not fit properly. This issue has now been fixed.
  • OpManager: Previously, when SDP-OP was integrated with OpManager there was an issue with syncing the child citype devices under Servers or Workstations. This has now been fixed.
  • OpManager: Previously, when SDP-OP was integrated with OpManager, there was an issue where the OS versions were failed to sync. This has now been fixed.
  • OpManager: Previously, if a device was configured with Custom Integration and had a severity of 'Service Down', a notification would not be triggered. This issue has now been fixed.
  • OpManager: Previously, from version 128540, the suppression data was fetched in the listDevices and listInterfaces APIs even when the ‘suppressed’ column was not selected in the column chooser under Inventory page. This has now been fixed.
  • NCM: Previously, there was an issue with the dashboard pie charts where the hover content was not hidden after drilling down. This has now been fixed.
  • Firewall: Support ID: 12104317, 12104327 – Saved reports for RAW Search and Aggregated Search could not be viewed. This issue has now been fixed.
  • Firewall: Support ID: 10720632 - Bandwidth Alert notification was not received despite notifications being enabled, and the alert did not appear in the Alarms tab. This issue has been resolved.

Build No 12.8.544 - September 26, 2025

Issues Fixed

  • General: From version 12.8.538, the “Keep Me Signed In” option was not displayed on the login page after updating the password policy until a service restart. This issue has now been resolved.
  • OpManager: From version 12.8.540, Rearm alarm for interface threshold failures are not triggered when threshold values are set for all severities. This issue has been fixed now.

Build No 12.8.543 - August 20, 2025

Security Fixes:

  • OpManager: Previously, a Stored Cross-Site Scripting (XSS) vulnerability was identified in the description field of the SNMP Trap Processor module. This issue has now been fixed. (Reported by tuannq x ngockhanhc311)

Issues Fixed:

  • OpManager: From version 12.8.458, the Monitoring Agent experienced issues while querying inventory details in certain environments. This issue has now been resolved.
  • OpManager: Sometimes, Agent-monitored devices experience data collection failures when the data collection archive cannot be unzipped due to file timestamp warning issues. This issue has been fixed now.
  • OpManager: Previously, IP address changes in Agent-monitored end devices were not reflected due to a synchronization issue. This has been fixed now.
  • OpManager MSP: Previously, navigating from the device snapshot page in MSP caused the probe dropdown to become locked or disabled on subsequent pages. This issue has been resolved.
  • NCM: Previously, after upgrading to version 12.8.537 or above, inventory devices may have appeared empty due to the deletion of the default SNMP "Public" profile. This issue has now been fixed.

Build 12.8.542 - July 22, 2025

  • General : Previously, a Stored Cross-Site Scripting (XSS) vulnerability was identified in the IP Address Manager module of OpManager, NetFlow Analyzer, and OpUtils (versions prior to 12.8.542). This issue has now been fixed. (Reported by tuannq x ngockhanhc311).
  • General: Previously, a XSS vulnerability was detected on the login page. This issue has now been resolved. (Reported by Andrey Alekseev - Positive Technologies. Refer CVE-2025-41437).
  • General : Previously, from version 12.8.453, in some cases, new tickets were created in SDP On premise instead of updating the existing ticket, this issue is fixed now.
  • General : Previously, there was a Sensitive Data Exposure vulnerability (Reported by Md Nafeed) due to an inappropriate file in the Google maps/AMap configuration zip files. This has been fixed now.
  • General : Previously, upgrade failures occurred in the DB-migrated environment due to a database-related file of the Firewall Analyzer module. This issue has now been resolved.
  • OpManager : During CSV discovery, the 'Device Type' and 'Display Name' values specified in the CSV file were not applied to non-SNMP devices due to an internal issue that existed from 12.8.456 version. This has now been fixed.
  • OpManager : Previously, agent-monitored devices did not generate Security event log alerts when configured separately for Audit Success or Audit Failure events. Both scenarios are now supported.
  • OpManager : From versions 12.8.540, availability-related alarms were affected for Meraki and WLC devices monitored via REST API. This issue has now been fixed.
  • OpManager : Previously, hardware widgets were not listed in the Hardware tab for certain devices due to an internal issue. This issue has now been fixed.
  • OpManager : Previously, the "Last Polled Value" alarm variable was not replaced with the actual value in the message field of the Notification Profile. This has been fixed now.
  • OpManager : From version 12.8.540, Syslog rules could not be configured to ignore the event. This issue has been fixed now.
  • OpManager : The commons-fileupload.jar dependency has been upgraded to version 1.6.0 by the ServiceDesk Plus Cloud team. The necessary changes to support this JAR migration have been implemented in OpManager.
  • OpManager : Previously, in version 12.8.540 and above, users faced issues with saving the Log a Ticket notification profile, immediately after first login. This has been fixed now.
  • OpManager : Previously, during CSV discovery, devices with empty values in the 'Group Name' or 'Device Type' columns were skipped from discovery. This issue has now been fixed.
  • OpManager : Previously, in Custom Integration, ticket creation failed in certain scenarios when updating ticket settings. This issue has now been fixed.
  • OpManager : From version 12.8.538, users were unable to update the downtime reason under Availability dial > Outage history due to an internal issue. This has been fixed now.
    • Enterprise Edition : Previously, users were unable to save the business view when the default device icon was changed. This issue occurred while selecting a probe in the Unified Console view, and is fixed now.
  • Enterprise Edition : From versions 12.8.540, there was an issue with Essential to Enterprise Edition migration for standalone setups using an MSSQL database. This issue has now been fixed.
  • Enterprise Edition : Previously, in setups migrated from Standard/Professional to Enterprise having an MSSQL database backend, the Upgrade Manager page did not display the service details. This issue has now been fixed.
  • Enterprise Edition : The upgrade pre-check failed for setups migrated from Standalone versions later than 12.7.257 on MSSQL databases. This issue has now been fixed.
  • OpUtils : Previously, users faced an issue where interfaces could not be fetched in Bandwidth Monitor due to snmpGet failures. This issue has now been resolved.
  • OpUtils : Previously, an admin could not edit another admin’s scope. This issue has now been fixed.
  • OpUtils : Previously, users encountered an issue with lease count and lease discovery on Linux DHCP servers. This has now been resolved.
  • OpUtils : Duplex value is now also collected from the new OID 1.3.6.1.2.1.10.7.2.1.19 for Cisco switches.
  • OpUtils : Previously, the Port View feature in OpManager (excluding the probe) was empty when the switch had different names in OpManager and OpUtils. This issue has now been fixed.
  • OpUtils : Previously, the scheduled Excel report had issues opening in Microsoft Excel and also displayed missing data. These problems have now been resolved.
  • OpUtils : Previously, the "subnet added time" was not getting updated when subnets were added through the OpManager add-on or via discovered subnets. This issue has now been fixed.
  • OpUtils : Previously, when subnets were added from the OpManager add-on or a supernet, the subnet audit messages did not include information about their source. This issue has now been fixed.
  • OpUtils : DHCP MAC Filtering and DHCP Reservation features are now implemented using environment variables during PowerShell script execution.
  • NetFlow : Resolved an issue where cloud service auto-updates failed in MSSQL databases.
  • NCM: Previously, the upgrade pre-check failed when NCM device template-related tables were missing in the database. This issue has now been fixed.

Build 12.8.541 - April 21, 2025

  • General : Previously, upgrading to 12.8.458 or higher versions would fail if Layer 2 maps were created prior to version 12.8.345. This issue has been fixed now.
  • General : Previously, there was an issue where the update actions of users with custom roles on the Central server were not properly synced with the Probes. This issue has now been fixed.
  • General : Previously, there was an XSS vulnerability in the custom menu tabs functionality. This has been fixed now.
  • OpManager : In versions 128456 and later, devices discovered via CSV did not have custom fields and groups populated. This issue has now been resolved.
  • OpManager : From version 128451 and above, the Data Collection Error Logs report failed to display data due to an internal error. This issue has now been resolved.
  • OpManager : From version 128451 and above, the Business View associated with Autologin for all users was not displayed correctly due to an incorrect response. This issue has now been fixed.
  • OpManager : Previously, in version 128401 and above, 'Delay and Recurring notifications' was not triggered for URLs. This has now been fixed.
  • Enterprise Edition : Previously, users faced an issue while enabling OpUtils in AD authentication within OpManager Central. This issue has now been resolved.

Build 12.8.540 - April 03, 2025

  • Enterprise Edition : The default database maintenance period for Recent Events has been increased to 45 days. This is applicable only for Central installations that have retained the previous default limit of 7 days.
  • OpManager : Introducing support of network Interface Monitoring (without using SNMP) for Agent-monitored devices, enabling detailed tracking of network performance and health.
  • OpManager : Introduced 'Group Members' and a 'No Chart' option to the Heatmap widget.
  • OpManager : Introduced a recurring schedule option in the Schedule Report feature, allowing users to schedule the reports on an hourly basis.
  • OpManager : Users can now configure multiple alarm suppression rules for a single entity.
  • OpManager : Users have the ability to configure suppression for Category, Group, and Global URL Monitors.
  • OpManager : Users can now schedule recurring suppressions using the Downtime Scheduler.
  • OpManager : Users can now access key performance metrics of database servers in the tooltip on the Heatmap Widget and Business View, provided the Applications Manager Plugin is installed.
  • OpManager : The 'All Groups' widget on the dashboard will now include a severity bar displaying the number of problematic members alongside the total member count.
  • OpManager : Managed Server subtab under Applications tab has been renamed to Probe Server.
  • OpManager : Introduced a new column under the 'Installed Software' tab on the Device Snapshot page to display the software version for devices monitored via WMI, CLI, and Agents.
  • OpManager : The Advanced Report will now have Software version, name and installation date in General Properties to let users create reports for installed software details.
  • OpManager : Previously, there was an issue when adaptive thresholds were being associated in bulk from the Perfgroup page. This has now been fixed.
  • OpManager : In Network Path Analysis, if the destination is not reachable, the Networkpath graph will be drawn up to the last active node.
  • OpManager : The OpManager Agent version was not displaying correctly in the Control Panel. This issue has now been resolved.
  • OpManager : OpManager Agent would repeatedly attempt to connect to a failed Notification Server (Websocket), resulting in an Agent server consuming too many TCP ports. This issue has now been fixed.
  • OpManager : Previously, OpManager Agent would retrieve an incorrect IP address when monitoring Windows devices with static IP configurations. This issue has now been fixed.
  • OpManager : Previously, if Interface Utilization exceeded 100%, it was capped at 100%. Now, the actual value will be displayed.
  • OpManager : Previously, slowness was observed when listing alarms in OpManager environments with a large number of alarm notes. This issue has now been resolved.
  • OpManager : Previously, an issue occurred when sorting Trap Processors by the status field. This issue has now been fixed.
  • OpManager : Previously, the severity column in Alerts and Events Reports was not translated. Translations have now been added for the respective languages.
  • OpManager : Previously, the "All Alerts with Notes" Report and its description were not translated. Translations have now been added for the respective languages.
  • OpManager : Previously, there was an issue in Default Reports where the "Email this Report" action generated reports without data for Top Syslog Count by Source, Top EventLog Count by Source, and Top Trap Count by Source. This has been fixed now.
  • OpManager : Henceforth, two-byte characters are supported in Trap Processor name and description fields.
  • OpManager : A new Device Type column has been added to the Alarms Page which can be selected from the Column Chooser in the Alarms Table view.
  • OpManager MSP: Previously, graphs did not load when generated from the Report Builder in MSP Central. This issue has now been fixed.
  • General : OpManager now integrates with Freshdesk, allowing users to automatically convert network alerts into tickets, enabling streamlined incident management and faster issue resolution.
  • General : The Notes column in the Alarms tab has been revamped with support for search and sorting functionality.
  • General : The alarm's EventType has been improved for better readability. Additionally, the ONE POLL and THREE POLL event types have been consolidated into Device Down for both clear and non-clear alarms. Know more.

Build 12.8.539 - April 01, 2025

  • Enterprise Edition: The database synchronization for IP Management and Switch Port Mapper modules has been improved to ensure consistent and reliable updates between the central and probe networks.
  • Enterprise Edition: Previously, when a probe was deleted, the central database entries for "oputilsresource", "snmpresource", and "ipresource" were not removed. This issue has now been fixed.
  • Enterprise Edition: Previously, deleting a switch or subnet from a node in a tree group caused synchronization issues, causing inconsistencies between the probe and central database. This issue has now been fixed.
  • Enterprise Edition: Previously, scanning a subnet on one probe would inadvertently remove the same subnet from another probe in the central database. This issue has now been fixed.
  • Enterprise Edition: Previously, subnets added from a DHCP scan were not syncing if any of the subnets already existed in the central database. This has now been fixed.
  • Enterprise Edition: Previously, when a previously deleted subnet was re-added during a DHCP scan, the corresponding probe ID was not syncing with the central database. This issue has now been fixed.
  • Enterprise Edition: The Count Comparison Report in Central now incorporates tables from IP Address Manager (IPAM) and Switch Port Mapper (SPM).
  • OpManager: OpUtils now enables user scoping for Subnet and Switch groups, with AD users logging in via AD group authentication.
  • OpUtils: Previously, the Switch Port Mapper module's default group could be moved into another node. This issue has now been fixed.
  • OpUtils: Previously, users faced an issue where subnets and switches were not displayed in the tree view. This issue has now been fixed.
  • OpUtils: Under the IP Address Manager module in the IP Details tab, introduced new columns - Type, DHCP Server, and Scope Address to classify IPs as either DHCP-assigned or static.
  • OpUtils: Previously, users faced an issue where the newly added IPAM Schedule Report details were not displayed. This issue has now been fixed.
  • OpUtils: A new feature that allows you to reserve or unreserve specific IP addresses within DHCP server scopes has been introduced.
  • OpUtils: Previously, the last scan time was updated only upon successful switch scan. This issue has now been fixed.
  • OpUtils: Previously, users faced an issue where proper error messages were not shown when the OpUtils server was shut down during switch scanning. This issue is now fixed.
  • OpUtils: Now, users can prioritize failed switches for scanning in scheduler and bulk scans.
  • OpUtils: Previously, users were unable to discover subnets when SNMPv2 was the only configured protocol on the device. This issue is now fixed.
  • OpUtils: Previously, under Switch Port Mapper, switches moved to the Default Task when edited. This issue is now fixed.
  • OpUtils: Now, a "More" option has been added to the VLAN ID, VLAN Name, Device Type, and Vendor columns for trunk ports.
  • OpUtils: Previously, interfaces were not added to the database if the ifMtu or ifType value was empty in the ifTable. This issue has now been fixed.
  • OpUtils: Now, OpUtils checks SNMP reachability using sysDescr (.1.3.6.1.2.1.1.1.0) instead of the base OID (.1.3.6.1) for faster response.
  • OpUtils: Previously, subnet approval failed when selecting over 50 subnets. This issue is now fixed.
  • OpUtils: In the IP Address Manager module, a new "Modified By" column has been added in the IP Details tab to show the user who modified the IP.
  • OpUtils: Under IP Address Manager, users can now discover subnets from the Cisco Meraki Controller.

Build 12.8.538 - March 25, 2025

  • OpManager: From 128510, the legend colors for availability pie charts were misordered due to an internal issue. This has been fixed now.

Build 12.8.536 - March 07, 2025

  • OpManager: The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on April 26, 2025.
  • OpManager: Cisco Catalyst (formerly Viptela) SD-WAN monitoring is now supported, allowing users to keep track of controllers, sites, tunnels, and overall network health in real-time.

Build 12.8.526 - March 20, 2025

  • OpManager: Previously, since version 128511, there was an issue with exporting and scheduling the Advanced Report to XLS. This issue has now been fixed.
  • OpManager: From 128510, the legend colors for availability pie charts were misordered due to an internal issue. This issue has now been fixed.
  • OpManager: Previously, there was an issue when adaptive thresholds were being associated in bulk from the Perfgroup page. This has now been fixed.
  • OpManager: Previously, in version 128401 and above, 'Delay and Recurring notifications' was not triggered for URLs. This has now been fixed.
  • OpManager MSP: Previously, graphs did not load when generated from the Report Builder in MSP Central. This issue has now been fixed.

Build 12.8.525 - March 04, 2025

  • General: Integration tabs and fields have been standardized and revamped across all integration pages to provide a more consistent and user-friendly experience.
  • OpManager: OpManager now integrates with Grafana, enabling users to visualize real-time network metrics, analyze trends, and build interactive dashboards.
  • OpManager: Minor errors occurring while selecting probe via the Unified Console View have been resolved.
  • OpManager: The Out of Memory issue that led to the upgrade failure above 128401 has now been resolved.
  • OpManager: Introducing a new feature in the Alarms module, allowing users to create custom views by specifying criteria. Only alarms that meet the defined criteria will appear in the personalized view.
  • OpManager: OpManager now features Zia Insights, offering automated narratives to simplify data interpretation and provide meaningful descriptive insights. Zia Insight generates clear, plain-language summaries of key insights from each graph, helping users uncover hidden patterns effortlessly.
  • OpManager: On the Test Monitor page, users now have the option to view the WMI query or CLI command used to collect the metrics. Additionally, they can execute it and retrieve the raw output directly from the end device.
  • OpManager: Option provided to customize the alert severity for Service Down in Process, Service, and Windows Service Monitors.
  • OpManager: Previously, Probe API keys were used to download historic archive files for probes. From version 128525, Central API keys can also be used to download data retention files for all probes.
  • OpManager: Previously, there were issues with data collection in Ruckus REST API Wireless LAN Controller and its access points. This has been fixed now.
  • OpManager: Previously, an error occurred when hovering over the tooltip of the destination device in the business view (that is created automatically during IPSLA monitor addition). This issue has been fixed now.
  • OpManager: All CI addition and update operations now utilize ServiceDeskPlus Cloud ZIP API calls instead of individual API calls.
  • OpManager: Previously, when two devices in OpManager had the same display name, the asset was not mapped for the corresponding device request in ServiceDeskPlus Cloud. This issue has now been resolved.
  • OpManager: Previously, in version 12.8.248 and above, in a few cases there was an issue with syncing switch stack details from the probe to the central server. This issue has now been fixed.
  • OpManager: Customers can now adjust the interval for collecting device inventory details from the Settings → Monitor Settings page.
  • OpManager: VMware ESXi hosts now display their Serial Number in the Device Snapshot page
  • OpManager: In Hardware Monitoring, unavailable sensors were previously deleted in the next poll. Now, they will be deleted after 30 days as the default, which can be customized.
  • OpManager: Previously customers were getting alerts related to change in Manufacturer and Models even if they were not changed in their end. This has been fixed now.
  • OpManager: In bulk device deletion involving devices from Addon modules, add-on device entries were not being properly removed. This has now been fixed.
  • OpManager: Previously, Power sensor data was not collected due to a typecasting issue in certain cases for Dell idrac devices. This issue has been resolved now.
  • OpManager: The dropdown in the MSSQL tab was not loading correctly when all the MSSQL instances were removed from the end server. This issue has now been resolved.
  • OpManager: The issue affecting service monitor polling after the completion of a device's scheduled downtime in certain scenarios has now been resolved.
  • OpManager: In few cases, Syslog alerts were not raised properly due to internal cache issues. This issue has now been resolved.
  • OpManager: The LAMA data was not syncing correctly once internet connectivity issue was restored. This issue has now been resolved.
  • OpManager: A parsing error occurred when the Rx/Tx Traffic of the Access Points exceeded its max value. This issue has now been fixed.
  • OpManager: Henceforth, selecting the Auto-Align option in Business View will automatically arrange the devices in ascending order.
  • OpManager: Previously, when navigating from the Business View creation page to the Layer 2 map page, the devices list was not carried forward. This has been fixed now.
  • OpManager: Previously, the IPSLA target device tooltip in Business View was not displayed. This has been fixed now.
  • OpManager: Previously, certain special characters were not supported in the ServiceNow Notification Profile custom fields. This issue has now been resolved.
  • OpManager: Previously, when OpManager was integrated with SDP OP, device synchronization occasionally resulted in serial number duplication. This issue has now been resolved.
  • OpManager: Previously, there was an issue when adaptive thresholds were being associated in bulk from the Perfgroup page. This has now been fixed.
  • OpManager: Introducing the option to monitor Meraki availability via REST API in the UI.
  • OpManager: During CSV discovery, when the CSV file lacked a 'Displayname' column, the device SysName value wasn't updated as the display name, even though SNMP credentials were associated. This issue has now been fixed.
  • OpManager: OpManager now supports syncing device custom fields with ServiceDesk Plus Cloud.
  • OpManager: Previously, an issue that affected the syncing of fields under a custom category from OpManager to ServiceDesk Plus Cloud has now been resolved.
  • OpManager: Previously, an issue with syncing device fields for certain categories from OpManager to ServiceDesk Plus Cloud has now been fixed.
  • OpManager: Previously, if a device field in OpManager had an empty value, it was synced as empty to ServiceDesk Plus Cloud. This has now been addressed by ensuring that only fields with values are synced.
  • OpManager: OpManager now supports syncing additional device default fields with ServiceDesk Plus Cloud.
  • OpManager: In ServiceDesk Plus Cloud, when the "System Description" field type is single-line text, there was previously an issue syncing OpManager's system description if it was multiline or exceeded 250 characters. This issue has now been resolved.
  • OpManager: The relationships between cloud services, CONF monitors, and manual dependency mappings will now be synced from Application Manager plugin to ServiceDesk Plus On-Premise.
  • OpManager: The Organization Map now supports additional Application Manager plugin modules, including Cloud Services, CONF Monitors, and Manual Dependency Mappings.
  • OpManager Storage Monitoring: Volume and Volume Group Capacity under Pure Storage were reported as 0 bytes. This issue has now been resolved.
  • OpManager Storage Monitoring: Hitachi HNAS device addition failed in some cases. This issue has been fixed.
  • OpManager Storage Monitoring: EqualLogic PS6100 device addition failed in certain instances. This issue has now been resolved.
  • OpManager Storage Monitoring: Previously, there was a mismatch in physical capacity for Dell PowerStore devices. This issue has been fixed.
  • Enterprise Edition: Updating the event log rules in Central is not being properly reflected in the probe-level caches. This issue has now been resolved.

Build 12.8.524 - February 26, 2025

  • General : Introducing an option to rename notification profiles/templates directly from the list view
  • General : From version 128524, TOTPs (time-based OTPs) are now valid for a single use only; any reused OTPs will be rejected
  • General : Previously, from version 128510 and above, there was a login issue when changing the default authentication method in system settings. This issue has now been fixed.
  • General : Previously from version 12.8.452, in some rare cases, if there was a connection loss with the MSSQL database server, the connection was not properly reestablished. This issue has now been resolved.
  • OpManager : An option to trigger Notification profiles to span across midnight has been introduced.
  • OpManager : A new criteria to match alarm message text or a specified regex has been introduced in notification profiles.
  • OpManager : Previously, in version 12.8.401 and later, there was an issue when changing a Notification profile from Manual to Groups association type. This issue has now been resolved.

Build 12.8.523 - February 13, 2025

  • OpManager: Advanced Reports Devices Module now includes support for filtering based on Performance Monitor Values
  • OpManager: Health Reports, Device Availability Dashboard report export and scheduling, and Device and Interface availability scheduling have been revamped for an improved user experience.
  • OpManager: Previously, in certain instances, the VMware Manual 'Update Inventory' process failed when encountering a new VM at that time. This issue has now been resolved.
  • OpManager: Previously, in some cases, when 'Poll Using' was set to DNS, newly discovered VMware VMs were not correctly mapped to their parent device. This issue has now been resolved.
  • OpManager: If a URL monitor fails, the failure message from the exception will be displayed based on a parameter configured in the database.
  • OpManager: The Capacity Utilization Monitor failed to collect values when the used space equaled the total space. This issue has now been resolved.
  • OpManager: NetApp ONTAP Cluster Devices could not be added when duplicate port names were present. This issue has now been resolved.
  • OpManager: The Polling Status field has been added to the Advanced Reports under Monitors module.
  • OpManager: The Storage Summary report lacked the Device Name in the RAID Summary table. This issue has been resolved.
  • OpManager: Filters can now be applied only after the data for the report has been loaded.
  • OpManager: The Server Health Report now includes VIWebService CPU and Memory Utilization monitors for VMware hosts.
  • OpManager: The type, vendor, and category filter criteria in the discovery rule engine will now be applicable for HCI/Virtualization discovery, even when SNMP, WMI, or CLI credentials are not associated.
  • OpManager: Introducing the Zia chatbot in the UI for improved user assistance.
  • OpManager: License limitations in a fresh probe installation by an existing customer led to issues with URL display in the EE setup. This has now been resolved.
  • OpManager: Notification Profile is not being linked to URLs on the URL edit page when the WebClient language is set to a language other than English.
  • OpManager: Previously, in few cases the getPerformanceMonitorDetails external API responded with empty values. This issue has now been fixed.
  • OpManager: A Device Status field filter has been introduced on the Support -> Diagnostics -> Data Collection Manager filter page.
  • OpManager: Extended bulk threshold configuration support for Application Monitors under the Quick Configuration Wizard
  • Enterprise: Previously, the Email Diagnostic Report contained the old Probe Name, even after its Display Name was changed. This issue has now been fixed.
  • OpManager: Previously, suspended monitors did not appear in the Data Collection Manager -> Failed Monitor List due to a stale entry issue. This issue has now been resolved.
  • OpManager: Previously, creating an RCA profile did not work when the group name contained a hyphen (-). This has been fixed now.
  • OpManager: Previously, when a default report was scheduled immediately after scheduling an advanced report, the scheduled default report was not created properly. This has been fixed now.
  • OpManager: Previously, the 'IPAddress' property was inappropriately listed under the device rediscovery properties. This has been removed now.
  • OpManager: Stack Switch Monitoring support for Cisco Catalyst 9500 & Juniper SRX 4200 48P has been introduced.
  • OpManager: From version 12.8.235, alerts were triggered for role changes in member switches of a switch stack. These alerts are now disabled by default.
  • OpManager: Several new device templates have been added to enable proper classification of devices during SNMP-based discovery.
  • OpManager: Previously, if the category contains underscore (_), the associated devices were not listed in the Tree view pane under inventory page and the 'Tree view' widget. This has been fixed now.
  • OpManager: Previously, users were unable to add custom fields with multi-byte characters in non-English installations. This issue has now been resolved.
  • OpManager: Previously, there were slowness observed in the devices and interfaces list view pages under Inventory due to duplicate API calls. This has been fixed now.
  • OpManager: Previously, the Availability % column in the Groups list view page and 'All Groups' widget displayed negative values due to stale entries. This issue has been fixed now.
  • Enterprise Edition: Previously, duplicate requests were sent from Probe to Central when the interface state is changed. This has been optimized now.
  • OpManager: Out-of-Memory (OOM) error has occurred when invoking listInterfaces API from an external source. Mandatory parameters have been added in the API to limit the number of interfaces to be fetched.
  • OpManager: During bulk device deletion of Stack switches, the device entries were not properly removed. This issue has been fixed now.
  • OpManager: Previously, there were slowness observed in Central when processing bulk updation (CSV import) of custom fields in Probe. This has been fixed now.
  • OpManager: 'Active Access Points' will be shown by default on the Access Point tab of the WLC Snapshot page.
  • OpManager: When an Access Point is removed from the WLC, users can choose either delete, unmanage, or generate alerts in OpManager by configuring an internal flag.
  • OpManager: The 'Add WLC' page will now display only vendor-specific models instead of all WLC models.
  • OpManager: A new WLC model 'Ruijie Controller' has been added in the 'Add WLC' page.
  • OpManager: Previously, the SysUptime monitor associated to the Arista devices will display the value in seconds instead of 'days'. This issue has been fixed now.
  • OpManager: Previously, the Rogue SSID displayed an incorrect 'Detected Time'. This issue has been fixed now.
  • OpManager: Previously, there were problems with sorting and searching across grids (tables, lists, etc.) in the UI. These have now been fixed.
  • OpManager: VPN monitoring via REST API is now supported for Palo Alto firewalls.
  • OpManager Storage Monitoring: Oracle ZFS Storage Devices monitoring is now supported in OpManager.
  • OpManager Storage Monitoring: Previously, there was a "False Disk Alert" for HPE StoreOnce devices. It has been fixed now.
  • OpManager Storage Monitoring: Previously, Dell PowerStore devices failed to populate volume data. This has been fixed now.
  • OpManager Storage Monitoring: Previously, in some cases where multiple arrays were configured as a cluster, HPE Nimble device addition failed. This has been fixed now.
  • OpManager Storage Monitoring: Previously, EMC Unity device addition failed in certain cases, due to an SSL certificate name mismatch. This has been fixed now.
  • OpManager Storage Monitoring: Previously, EMC Data Domain device could not be added on the Probe in a few instances. This has been fixed now.
  • OpManager Storage Monitoring: Previously, HPE XP8 device addition failed in some cases due to an SSL certificate name mismatch. This has been fixed now.

Build 12.8.514 - February 24, 2025

  • General : Previously from version 12.8.452, in some rare cases, if there was a connection loss with the MSSQL database server, the connection was not properly reestablished. This issue has now been resolved.
  • OpManager: From version 12.8.235, alerts were triggered for role changes in member switches of a switch stack. These alerts are now disabled by default.
  • OpManager: The Out of Memory issue that led to the upgrade failure above 128401 has now been resolved.
  • OpManager: Previously, in certain instances, the VMware Manual 'Update Inventory' process failed when encountering a new VM at that time. This issue has now been resolved.
  • OpManager: Previously, in version 12.8.401 and later, there was an issue when changing a Notification profile from Manual to Groups association type. This issue has now been resolved.

Build 12.8.511 - January 30, 2025

  • General: Previously, there was a potential privilege escalation caused by incorrect directory permissions. This issue has now been fixed. (Reported by Crispr Xiang. Refer CVE-2024-9871)
  • OpManager: Introduced 'Traffic Insights' for Access Point alarms, providing detailed information on top traffic, applications, and conversation data from the Flow module.
  • OpManager: Added Access Point traffic, Top Clients, and Top SSIDs data from the Flow module into the OpManager Access Point Snapshot.
  • OpManager: The startup of OpManager failed in certain Linux environments. This issue has now been fixed.
  • Enterprise Edition: Previously, from version 12.8.401 and above, users encountered an issue when selecting the 'No Probes' option in the probe selection screen within the Unified Console View, resulting in an error message. This has been fixed now.

Build 12.8.510 - January 23, 2025

  • General: JRE has been migrated to version 11.0.24+8-LTS.
  • General: PostgreSQL has been upgraded to version 14.15. The PostgreSQL vulnerability issues from 14.11 have been fixed now.
  • General: Added a Security Recommendations page under Security Settings to display security configurations specific to the ITOM service.
  • General: Introduced a summary icon in the top-right corner of the product interface, providing a quick view of the security score.
  • General: Users can enforce Content security policy restrictions for Widgets and NOC views, by configuring FrameSrc or frame-ancestors from the security recommendations page.
  • OpManager: Previously there was an issue in updating weak TLS/Cipher options for NFADE and FWADE. This has now been fixed.
  • OpManager: Previously, in the Trap Viewer, the trap receiver stopped after it was started, if the user switched to another browser tab or navigated away from the page. This issue has now been fixed.
  • OpManager: Mail and proxy servers were not syncing properly from OpManager to APM Plugin, when one of the values contained an "&" character. This issue has now been resolved.
  • OpManager: Previously, from version 128456, customized alarm severity colors were not displayed correctly in the UI due to an internal issue. This issue has now been resolved.
  • OpManager: Previously, upgrading to 12.8.458 would fail if Layer 2 maps were created prior to version 12.8.345. This issue has been fixed now.
  • OpManager: Previously, there was an issue with updating custom fields when the device name contained special characters. This issue has now been fixed.
  • OpUtils: Color codes to identify the subnet category has been introduced.
  • OpUtils: Under Reports, in IP Address Manager and Switch Port Mapper, an option to choose only the necessary columns has been added.
  • OpUtils: Previously, there was a subnet IP count mismatch caused by failover scope IPs in the DHCP server. This issue has now been fixed.
  • OpUtils: Previously, under Switch Port Mapper, a sorting and count mismatch issue occurred on the Ports page due to multi-MAC ports. This issue has now been fixed.
  • OpUtils: Users can now add multiple remote domain controllers under the Active Directory section in Settings.
  • OpUtils: The WMI/CLI query tools have been enhanced to allow users to choose from pre-configured credentials or manually enter their own.
  • OpUtils: Previously, the Block/Unblock Switch Port feature encountered an issue when space characters were used in the installation folder. This has now been fixed now.
  • OpUtils: The modifyCustomFieldValue API is now available as an external API.

Build 12.8.466 - August 21, 2025

  • OpManager : Notification Profile is not being linked to URLs on the URL edit page when the WebClient language is set to a language other than English.
  • OpManager : Previously, when resizing the Rack and CCTV widgets, the Rack view did not fit properly. This issue has now been fixed.
  • OpManager : Previously, users were unable to add custom fields with multi-byte characters in non-English installations. This issue has now been resolved.
  • OpManager : Previously some of the fields in Advanced Reports were not translated. This issue has been fixed.
  • OpManager : The external third party jar dependency for exporting pdf reports in Japanese, Chinese and Korean languages has been removed.
  • OpManager : The commons-fileupload.jar dependency has been upgraded to version 1.6.0 by the ServiceDesk Plus Cloud team. The necessary changes to support this JAR migration have been implemented in OpManager.
  • OpManager : Previously, a Stored Cross-Site Scripting (XSS) vulnerability was identified in the description field of the SNMP Trap Processor module. This issue has now been fixed. (Reported by tuannq x ngockhanhc311).
  • Firewall : The Bandwidth Alert notification was not received despite notifications being enabled, and the alert did not appear in the Alarms tab. This issue has been resolved.

Build 12.8.465 - July 9, 2025

  • General : Previously, a Stored Cross-Site Scripting (XSS) vulnerability was identified in the IP Address Manager module of OpManager, NetFlow Analyzer, and OpUtils (versions prior to 12.8.582). This issue has now been fixed. (Reported by tuannq x ngockhanhc311).
  • General : Previously, there was a Sensitive Data Exposure vulnerability (Reported by Md Nafeed) due to an inappropriate file in the Google maps/AMap configuration zip files. This has been fixed now.
  • OpUtils : DHCP MAC Filtering feature is now implemented using environment variables during PowerShell script execution.

Build 12.8.464 - June 20, 2025

  • General: An issue prevented devices from being highlighted during device association. This behavior was observed in the latest Chrome browser and has now been fixed.
  • General: Previously, from version 128453, in some cases, new tickets were created in SDP On premise instead of updating the existing ticket, this issue is fixed now.
  • Enterprise Edition: Previously, a path traversal vulnerability (ZVE-2025-3008 Reported by Zewei Zhang) was detected during file transfers between Central and Probe. Path sanitization has now been implemented to fix this issue.
  • Enterprise Edition: Previously, users were unable to save the business view when the default device icon was changed. This issue occurred while selecting a probe in the Unified Console view, and is fixed now.
  • Enterprise Edition: Previously, in setups migrated from Standard/Professional to Enterprise having an MSSQL database backend, the Upgrade Manager page did not display the service details. This issue has now been fixed.
  • OpManager : Previously, there was an issue fetching the serial number of Cisco switch stack devices on the Device Summary page. This issue has now been fixed.
  • OpManager : Previously, an issue with the false auditing of hardware information retrieval for agent devices was identified. This issue has now been resolved.
  • OpManager : During CSV discovery, the 'Device Type' and 'Display Name' values specified in the CSV file were not applied to non-SNMP devices due to an internal issue that existed from 128456 version. This has now been fixed.
  • OpManager : OpManager Agent would repeatedly attempt to connect to a failed Notification Server (Websocket), resulting in an Agent server consuming too many TCP ports. This issue has now been fixed.
  • OpManager : Previously, OpManager Agent would retrieve an incorrect IP address when monitoring Windows devices with static IP configurations. This issue has now been fixed.
  • OpManager : Previously, in certain instances, the VMware Manual 'Update Inventory' process failed when encountering a new VM at that time. This issue has now been resolved.
  • OpUtils: Duplex value is now also collected from the new OID 1.3.6.1.2.1.10.7.2.1.19 for Cisco switches.
  • OpUtils: Previously, the Port View feature in OpManager (excluding the probe) was empty when the switch had different names in OpManager and OpUtils. This issue has now been fixed.
  • OpUtils: Previously, users encountered an issue with lease count and lease discovery on Linux DHCP servers. This has now been resolved.
  • OpUtils: Previously, the scheduled Excel report had issues opening in Microsoft Excel and also displayed missing data. These problems have now been resolved.
  • OpUtils: Previously, users faced an issue where interfaces could not be fetched in Bandwidth Monitor due to snmpGet failures. This issue has now been resolved.
  • NCM: Previously, the upgrade pre-check failed when NCM device template-related tables were missing in the database. This issue has now been fixed.

Build 12.8.463 - June 05, 2025

  • General: Previously, a XSS vulnerability was detected on the login page. This issue has now been resolved. (Reported by Andrey Alekseev - Positive Technologies. Refer CVE-2025-41437).
  • Enterprise Edition: Previously, in setups migrated from Standard/Professional to Enterprise having an MSSQL database backend, the Upgrade Manager page did not display the service details. This issue has now been fixed.

Build 12.8.462 - April 21, 2025

  • General: Previously, there was an issue where the update actions of users with custom roles on the Central server were not properly synced with the Probes. This issue has now been fixed.
  • General: Previously, a server error occurred when modifying the default port in an AD domain and updating the domain's group. This error has now been fixed.
  • General: Previously, there was an XSS vulnerability in the custom menu tabs functionality. This has been fixed now
  • OpManager: The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on April 26, 2025.
  • OpManager: From version 128451 and above, the Data Collection Error Logs report failed to display data due to an internal error. This issue has now been resolved.
  • OpManager: From version 128451 and above, the Business View associated with Autologin for all users was not displayed correctly due to an incorrect response. This issue has now been fixed.
  • OpManager MSP: Previously, navigating from the device snapshot page in MSP caused the probe dropdown to become locked or disabled on subsequent pages. This issue has been resolved.
  • OpManager MSP: Previously, graphs did not load when generated from the Report Builder in MSP Central. This issue has now been fixed.
  • OpManager: Previously, in version 128401 and above, 'Delay and Recurring notifications' was not triggered for URLs. This has now been fixed.

Build 12.8.461 - February 20, 2025

  • General: Previously, there was a potential privilege escalation caused by incorrect directory permissions. This issue has now been fixed. (Reported by Crispr Xiang. Refer CVE-2024-9871)
  • General: Previously from version 12.8.452, in some rare cases, if there was a connection loss with the MSSQL database server, the connection was not properly reestablished. This issue has now been resolved.
  • OpManager: Previously, in versions 12.8.401 and above, there was an issue with the Device Status Poll Criteria selection on the edit workflow page. This has now been fixed.
  • OpManager: The Out of Memory issue that led to the upgrade failure above 128401 has now been resolved.
  • OpManager: Previously, in version 12.8.401 and later, there was an issue when changing a Notification profile from Manual to Groups association type. This issue has now been resolved.

Build 12.8.460 - February 03, 2025

  • OpManager: From version 12.8.235, alerts were triggered for role changes in member switches of a switch stack. These alerts are now disabled by default.
  • OpManager: Previously, in the Trap Viewer, the trap receiver stopped after it was started, if the user switched to another browser tab or navigated away from the page. This issue has now been fixed.
  • OpManager: Previously, there was an issue with updating custom fields when the device name contained special characters. This issue has now been fixed.
  • OpManager Enterprise Edition: Previously, from version 12.8.401 and above, users encountered an issue when selecting the 'No Probes' option in the probe selection screen within the Unified Console View, resulting in an error message. This has been fixed now.
  • OpUtils: Previously, the group-wise Subnet Summary bar graph had a loading issue from version 128458. This has now been fixed.

Build 12.8.459 - January 21, 2025

  • OpManager: Previously, from version 128456, customized alarm severity colors were not displayed correctly in the UI due to an internal issue. This issue has now been resolved.
  • OpManager: Previously, upgrading to 12.8.458 would fail if Layer 2 maps were created prior to version 12.8.345. This issue has been fixed now.
  • OpUtils: Previously, the Block/Unblock Switch Port feature encountered an issue when space characters were used in the installation folder. This has now been fixed now.
  • OpManager: The startup of OpManager failed in certain Linux environments. This issue has now been fixed.

Build 12.8.458 - January 06, 2025

  • General: A new option to "Export Dashboard as PDF" has been introduced in the Dashboards module.
  • General: Azure SQL Database is now supported.
  • General: Due to some format changes in the SDP MSP API, categories field from version 14800 could not be fetched. This issue has now been fixed.
  • General: Introducing support for installation on the Azure Cloud platform.
  • General: Java mail jar has been upgraded to Jakarta mail jar version 2.0.3.
  • General: Microsoft SQL database version 2022 (16.x) is now supported.
  • General: PostgreSQL JDBC driver, MSSQL JDBC driver, and FIPS dependent components have been updated.
  • General: Previously, sending a Test SMS would cause issues if the rebranded product name included double quotes or special characters. This has now been fixed.
  • General: Previously, the MIB Browser was not responding to low-latency devices when custom SNMP credentials were used. This issue has now been fixed.
  • General: Previously, there was an issue while deleting bulk subnets from the OpManager Probe's license page. This has been fixed now.
  • General: Previously, widget position data was applied globally across all users. Now, each authorized user can arrange and save their dashboard layout independently.
  • General: The efficiency of the Schedule Backup API has been improved.
  • General: To enhance security, it is now mandatory to change the default admin credentials immediately upon the first login.
  • General: Upgraded the dependent components of the Report generation module.
  • General: Users can now configure the ticket settings in ServiceDesk Plus On-Premise/MSP to reopen the most recently closed ticket associated with an alert within the required number of days.
  • General: Users can reset ServiceDesk Plus On-Premise/MSP integration in OpManager, which will delete all data related to the integration in OpManager.
  • General: The self-signed certificate regeneration process has been simplified now. Click here to learn more.
  • OpManager: Previously, the Time label on the x-axis in Report Builder was not translated. This issue has now been fixed.
  • OpManager: A new report 'Events Trends' has been introduced under Trend Reports, which provides hourly, daily, and weekly count of the device's events.
  • OpManager: A new report 'Interface Utilization Trends' has been introduced under Trend Reports, which provides hourly, daily, and weekly data on interface utilization.
  • OpManager: Ansible playbooks can now be executed from Zia insights dashboard.
  • OpManager: Aruba Instant Access Points (IAP) monitoring is now supported via WLC discovery.
  • OpManager: Capacity planning reports for interfaces has been introduced.
  • OpManager: Custom fields from other modules, such as Network Configuration Management and IP Address Management have been unified, and are displayed in both the inventory and the device snapshot page for all OpManager editions.
  • OpManager: Device graphs, Monitor graphs, Interface graphs, Report Builder graphs, and Integrated Reports graphs have been revamped for better user experience. Users can customize them under Settings > Database Maintenance > Graph Display Settings.
  • OpManager: Device group scope for users has been introduced under Settings -> General Settings -> User Management. Administrators can now associate users with device groups and grant them access only to the devices within those groups.
  • OpManager: DomainController discovered through Virtual Discovery fails to sync with SDPOP. This has been resolved now.
  • OpManager: During Layer2 discovery, users can now exclude unwanted devices by using the 'Discovery Filter' option.
  • OpManager: During Layer2 discovery, users can select the 'Save as business view' option to save the Layer2 map as a business view and automatically sync it with the Layer2 map based on the scheduled interval.
  • OpManager: During scheduled device discovery, the switch devices that are not responding to a specific SNMP OID were deleted automatically. This issue has now been fixed.
  • OpManager: Email notification support has now been extended for instances where the Applications Manager plug-in is identified under Self-Monitoring.
  • OpManager: Enhanced security measures have been implemented in OpManagerAgent executables used for server monitoring to prevent potential vulnerabilities.
  • OpManager: Henceforth, if the "SSL/TLS Certificate Monitoring" option is enabled for a URL Monitor, the associated certificate of the URL will be monitored using the APM plugin. [Note: This option is applicable only if the APM Plugin is installed.]
  • OpManager: Henceforth, Switch Port Mapper (SPM) and its connected device relationship data will be pushed to SDPOP.
  • OpManager: Henceforth, the 'Port Channel' information will be displayed in the business view (created from the Layer2 map) if the link between devices is part of a port channel.
  • OpManager: Henceforth, the "Test monitor" action can be performed on agent-monitored devices even if they are in an "Unmanaged" or "On Maintenance" state.
  • OpManager: Henceforth, the Layer2 discovery can be performed for devices within an IP Range or a group of devices, without requiring seed router information.
  • OpManager: Henceforth, when a monitoring agent is uninstalled in the end device, the device will be Unmanaged in OpManager.
  • OpManager: If a custom category associated with a device template is deleted, it becomes impossible to change the template category to another category. This issue has been resolved.
  • OpManager: Introducing a new feature that allows you to effortlessly onboard devices with IP addresses from the ServiceNow CMDB and monitor them in OpManager. This integration is available through the 'Import from ServiceNow' option under Settings -> Discovery -> Network Discovery -> New Discovery.
  • OpManager: Introducing the Organization Map, which visualizes the relationship of all devices (from Layer 2 Map, SPM, APM, VMs modules and Uplink dependency) as a single network diagram.
  • OpManager: Network discovery was running for a long time due to an internal issue that occurs when discovering the IPv6 devices. This has now been fixed.
  • OpManager: OpManager now includes a 'ServiceNow CMDB' Audit Report that provides detailed information on devices synced to ServiceNow.
  • OpManager: OpManager now offers support for monitoring of Windows Server 2025.
  • OpManager: Previously from version 128248, alerts were not sorted based on the last updated time in the Device Snapshot page, and the mobile application. This has now been fixed.
  • OpManager: Previously, for agent-monitored devices, monitoring data was not stored when a large number of configured event logs were received from the end-monitoring device. This issue has now been fixed.
  • OpManager: Previously, if some vCenter entities (other than Host and VMs) were not defined with an entity name, the corresponding vCenter's inventory update used to fail in OpManager. This issue has been fixed by skipping the unnamed entities in the vCenter during rediscovery.
  • OpManager: Previously, if the Guest OS name from a particular VM could not be retrieved, the subsequent VMware inventory update used to fail in some instances. This issue has been fixed now.
  • OpManager: Previously, importing custom fields via CSV failed when all the selected headers were non-English. This has now been fixed.
  • OpManager: Previously, in ServiceDesk Plus On-Premise, there was a issue in request creation if the Group and Technician selected under "Log a Ticket" Notification Profile was not from the default settings Site. This issue has been fixed now by retrieving only the values from the default settings site.
  • OpManager: Previously, in some builds, a connection could not be established with the APM plug-in since OpManager's version number was not shared properly. This issue has now been fixed.
  • OpManager: Previously, in some instances, if any VMware host monitor was polled alongside "Average CPU Utilization" or "Overall Network Usage" monitors, the data polling for that monitor would fail. This issue has now been fixed.
  • OpManager: Previously, in the IPAM list view, clicking on a supernet from the tree view displayed all subnets in the grid rather than only those within the supernet. This issue has now been fixed.
  • OpManager: Previously, starting from version 128401, an issue occurred while adding new probes for PPM customers due to backend schema changes. This issue has now been fixed.
  • OpManager: Previously, Switch Port Mapper data was not being populated correctly in the Organization Map. This issue has now been resolved.
  • OpManager: Previously, the applied default filter on the 'Alarms' tab was reset when switching to the 'Alarm Snapshot' tab. This issue has now been fixed now.
  • OpManager: Previously, the CI sync action used to fail in some cases if ServiceDesk Plus On-Premise was in other languages. This issue has been fixed now.
  • OpManager: Previously, the download of report PDFs across OpManager was affected due to a socket connection issue in retrieving the APM plug-in's installation URL. This issue has been fixed now.
  • OpManager: Previously, the status of a business view shortcut was not updated when the state of its member device was changed from 'On Maintenance' to 'Up'. This issue has now been fixed.
  • OpManager: Previously, there was a mistranslation in the Alarm Correlation Rules module. This has been corrected now.
  • OpManager: Previously, there was an issue in creating a request in SDP MSP if the name configured in OpManager was duplicated among the SDP MSP domains. This has now been fixed.
  • OpManager: Previously, there was an issue where the successful polling of vSAN monitors was marked as failures. This has now been fixed.
  • OpManager: Previously, there was an issue with selecting custom fields using the search function while configuring a notification profile for ServiceNow. This has now been fixed.
  • OpManager: Previously, there was an issue with Workflow alarm triggers from the Alarms tab. This has been resolved.
  • OpManager: Previously, users were facing security error when updating an existing storage device template. This issue has been fixed now.
  • OpManager: Previously, when an agentless device was monitored for availability using SNMP, and later converted to an agent-monitored device, the availability would still be monitored using SNMP. This issue has been fixed now.
  • OpManager: Support for folder monitoring and service (port) monitoring for agent-based monitoring devices has been introduced.
  • OpManager: The 'Login Details,' 'End of Support Date,' and 'OS Version' for switches in ServiceDesk Plus On-Premise will now be synced from OpManager to ServiceDesk Plus On-Premise.
  • OpManager: The Application Manager plugin widgets in the NOC view were not functioning for AD users. This issue has now been resolved.
  • OpManager: The following jar packages have been upgraded for VMware monitoring from vim25.jar version 7.0U3F to 8.0.0, and vsanmgmt-sdk.jar version from 7.0U3 to 8.0.U3.
  • OpManager: The issue with updating vSAN disk details during VxRail discovery has now been resolved.
  • OpManager: User access control for Ansible profiles has been enhanced.
  • OpManager: Users can configure Alarm Suppression in the Central Server from the Inventory List of Devices and the Quick Configuration Wizard.
  • OpManager: Users can now configure dynamic variables for ServiceDesk Plus OP request comments under Third Party Integrations > ServiceDesk Plus > Advanced Settings.
  • OpManager: Users can now delete multiple groups at once, and configure group settings under the new Group Settings option.
  • OpManager: Users can now search for both devices and links on the business view page.
  • OpManager: Users can now view the recent alarms, notes, packet loss , response time, CPU & memory utilization in the tool tip of device icons in the Business View, Layer 2 map and Heat Map.
  • OpManager: Wireless LAN Controller (WLC) monitoring support has been provided for Cisco 9800 Controller.
  • Enterprise Edition: From version 12.8.456, the monitored interfaces limit per probe has been increased from 10,000 to 15,000.
  • Enterprise Edition: An option to sync logical groups from the Central server to all probe servers has been introduced.
  • Enterprise Edition: Previously, the probe list is sorted in random order across OpManager Central. This has been ordered alphabetically. Additionally, Probe details and UCV dropdowns are sorted alphabetically and by severity.
  • Enterprise Edition: Previously, there was an issue where the Probe Name would not be replaced for dynamic workflow variables while executing the Notification Profile for invoking a Webhook (for datastores). This issue has now been fixed.
  • Enterprise Edition: In Central, under the IP Address Manager tree, only the probes that have at least one subnet or switch will be displayed.
  • OpManager Storage Monitoring: New performance metrics have been introduced for the QNAP QTS Storage Device template.
  • OpUtils : Previously, there was an issue while discovering the scopes of Linux and Cisco DHCP servers. It has been fixed now.
  • OpUtils : The IP Address Management (IPAM) feature now includes the ability to discover subnets from the inetCidrRouteTable.
  • OpUtils: A new "List" data type has been introduced to the Custom Column in the IP Address Manager and Switch Port Mapper modules.
  • OpUtils: A new checkbox has been added to the 'Add Custom Column' page to mark custom fields as mandatory. These fields will be mandatory only when editing them on their respective pages.
  • OpUtils: In the IPAM subnet page, if columns are enabled from the column chooser, the "Delete" and "Scan" options for the subnets were not working.This issue has been fixed.
  • OpUtils: Previously, in IP Address Manager, under Edit IP Details, the date did not get updated if the Authenticity was selected as "Guest." This has been fixed now.
  • OpUtils: Previously, on the switch snapshot page under the Switch Port Mapper tab, the scan functionality did not work when users clicked the Scan Switch icon. This issue has now been fixed.
  • OpUtils: Previously, OpenCSV, and JavaCsv jars were used to import CSV files, now the need for these jar dependencies has been removed.
  • OpUtils: Previously, the service would restart when importing a CSV file with non-English characters in the 'DNS' column. This issue has now been fixed.
  • OpUtils: Previously, there was an issue retrieving configuration files in the Config File Manager tool from version 12.8.344. This has now been fixed.
  • OpUtils: Previously, there was an issue with displaying the scan status tooltip under the IP Address Manager and Switch Port Mapper. This has now been fixed.
  • OpUtils: Previously, when editing the IP Availability HeatMap widget, only the subnet Address was displayed. Now, it shows the Subnet Address along with the Subnet Name in the format: Subnet Address (Subnet Name).
  • OpUtils: The Switch Port Mapper and IP Address Manager Tree Views have been enhanced with the addition of a search function, options to display DNS Name, Sys Name, Switch Name or IP in the Switch Port Mapper Tree View, and Subnet Names in the IP Address Manager Tree View.
  • OpUtils: Tree view now defaults to collapsed state with root node expanded, and the state of the nodes (opened/closed) is maintained.
  • OpUtils: Users can now view the DHCP's DNS name in the IPAM tree view if the DNS name is resolved.
  • Firewall: For enhanced security, FTP and Telnet options have been removed from some features under 'Settings' page. We recommend using SSH/SFTP, SCP, or TFTP options for secure operations.
  • Firewall: Support ID: 10064013 - Previously, Change Management Report was not displaying IP addresses for certain users due to a logout event triggered by a session timeout. This issue has been fixed now.
  • Firewall: Support ID: 10289604 - Previously, an issue prevented users from being added under "User Management" when selecting the "Rule Administration" privilege. This has been fixed now.
  • Firewall: Support ID: 10359365 - Parsing slowness in WatchGuard firewall syslogs caused the 'records' folder to grow continuously. This issue has been fixed now.
  • Firewall: Support ID: 10370716 - Previously, the source country and destination country were displayed as "-" in RAW search. This issue has now been fixed.
  • Firewall: Support ID: 10416275: Previously, an issue prevented the Rule Change Count from functioning correctly. To resolve this, the logic was updated to calculate Rule change detection by comparing the 'last fetched configuration' with the current data. This issue has now been fixed.
  • Firewall: Support ID: 10479240 - Previously, clicking "Generate Security Audit Report Now" in VDOM cases caused the VDOM device count to increment incorrectly. This issue has now been resolved.
  • Firewall: Support ID: 10499304 - Previously, there was an issue with parsing WatchGuard firewall configurations. This issue has now been resolved.
  • NCM: Previously, the OpManager MSP NCM add-on allowed exporting reports under the Advanced Report section, for users accessing probes directly from the OpManager MSP central server. This has now been restricted.
  • NCM: Spark Gateway Terminal remains the default choice (on port 7275) for TELNET access across all devices. For Custom Terminal Devices, Spark Gateway Terminal is the default for both SSH and TELNET access.
  • NCM: The Firmware Vulnerabilities tab under the device snapshot page now shows vulnerability status for devices without data.
  • NCM: The new Emulator has now been introduced as the default option for seamless SSH access, replacing the old NCM terminal (Maverick). A new option in the Client / Server Settings tab allows you to disable the new emulator if preferred.
  • NCM: Users can now sync EOL/EOS reports offline to stay updated and ensure proactive device configuration management.
  • NetFlow: DPI now supports a 10 Gigabit line rate.
  • NetFlow: Support ID: 10345326: The issue where SFlow displayed negative data when the counter flow sample value was zero has been resolved.
  • NetFlow: Support ID: 10491787: The issue with flow processing when parsing optional templates has been resolved.
  • NetFlow: Support ID: 10496440: The communication issue between the Collector and the Central Server, which resulted in an indefinite wait due to network delays, has been fixed.
  • NetFlow: Support ID: 10612910: The product startup delay caused by a vendor module update via the Stratus server has been fixed.
  • NetFlow: Support ID: 9922700 - The RAM spike issue in DPI has been resolved.

Build 12.8.407 - May 28, 2025

  • General: An issue prevented devices from being highlighted during device association. This behavior was observed in the latest Chrome browser and has now been fixed.
  • General: Previously, there was an XSS vulnerability in the custom menu tabs functionality. This has been fixed now.
  • General: The efficiency of the Schedule Backup API has been improved.
  • OpManager: Previously, the time label on the x‑axis in the Report Builder was not translated. This issue has now been fixed.
  • OpManager: Previously, scheduling a report from the Monitors Graph page sometimes caused the report generation to fail. This issue has now been fixed.
  • OpManager: Previously, in version 128401 and above, users were unable to associate thresholds using the Threshold Settings option under the Quick Configuration Wizard. This issue has now been fixed.
  • OpManager: Previously, users were unable to add custom fields with multi-byte characters in non-English installations. This issue has now been resolved.
  • OpManager: The Snappy DLL file generated in the OpManager temporary folder will now be omitted from the file integrity scan.
  • OpManager: Previously, since version 128405, there was an issue with exporting and scheduling the Advanced Report to XLS. This issue has now been fixed.
  • OpManager: Previously, in version 128401 and above, 'Delay and Recurring notifications' was not triggered for URLs. This has now been fixed.
  • OpManager: The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on April 26, 2025.
  • OpManager: Previously, an issue with the false auditing of hardware information retrieval for agent devices was identified . This issue has now been resolved.
  • OpManager: Previously, the CSV file uploads containing Japanese content failed with the error "Invalid input characters detected in the CSV file." This issue has now been resolved.
  • Enterprise Edition: Previously, in setups migrated from Standard/Professional to Enterprise having an MSSQL database backend, the Upgrade Manager page did not display the service details. This issue has now been fixed.
  • Enterprise Edition: The upgrade pre-check failed for setups migrated from Standalone versions later than 12.7.257 on MSSQL databases. This issue has now been fixed.
  • Enterprise Edition: In Central versions 128401 and above, when the "Probe Down" criterion was selected, the Delay and Recurring notifications were not triggered or displayed in the UI. These issues have now been resolved.
  • NetFlow : The default IP groups in Japanese builds have been deleted.
  • NetFlow : The Utilization option has been removed from the Individual graph in the Device Snapshot view.
  • NetFlow : Support ID: 10715213 - Resolved translation issue in Autonomous System custom search.
  • General : Previously, a path traversal vulnerability was detected in OpManager's search logs. This has been fixed now.
  • Firewall: Support ID: 10599137 - The device list did not load correctly on the "import logs" settings page when the language was set to Japanese. This issue has been resolved.

Build 12.8.406 - February 28, 2025

  • OpManager: The Out of Memory issue that led to the upgrade failure above 128401 has now been resolved.
  • OpManager: Previously, in certain instances, the VMware Manual 'Update Inventory' process failed when encountering a new VM at that time. This issue has now been resolved.
  • OpManager: Previously, in version 12.8.248 and above, in a few cases there was an issue with syncing switch stack details from the probe to the central server. This issue has now been fixed.
  • OpManager: Previously, in version 12.8.401 and later, there was an issue when changing a Notification profile from Manual to Groups association type. This issue has now been resolved.
  • OpManager: In bulk device deletion involving devices from Addon modules, add-on device entries were not being properly removed. This has now been fixed.
  • OpManager: Previously, the global search page did not return any results when a custom field with a numeric data type was associated with the device. This issue has now been fixed.

Build 12.8.404 - January 22, 2025

  • General: Previously, startup slowness occurred in some cases due to the NetFlow AS dump. This issue has now been resolved.
  • OpManager: The startup of OpManager failed in certain Linux environments. This issue has now been fixed.

Build 12.8.402 - November 14, 2024

  • OpManager: Bulk device deletion fails if all the selected devices exist in any of the Add-on modules (such as NCM, OPU, etc.). This issue has been fixed now.
  • OpManager: Previously, there were duplicate threshold alerts generated for performance monitors due to an internal issue in scheduled discovery.  This has been fixed now.
  • OpManager: Previously, due to an internal issue, forecast alerts were raised even if the configured thresholds were not breached, resulting in false alerts. This issue has now been fixed.
  • OpManager: Previously, in some cases, OpManager used to restart automatically due to the JVM's meta space issue. This issue has now been fixed.

Build 12.8.401 - October 25, 2024

  • OpManager: A new 'Device Tree' filter has been added for all network devices in the 'Network' tab. Additionally, new group-by filters (Type, Protocol, Apps, Severity) were added to both the inventory and network tabs, alongside the existing filters.
  • OpManager: Notification Profiles can now be associated with Device Groups or Interface Groups.
  • OpManager: Users can now configure Notification Profile criteria based on interface availability, a specific interface threshold monitor violations, or both.
  • OpManager: OpManager now integrates with Ansible, allowing users to automate their network management tasks effortlessly. To set it up, go to Settings > Integrations, where Ansible will be available as an option for automated playbook execution.
  • OpManager: Introduced a new dashboard named "Zia Insights" to show recommendations for the configured Forecast Alerts.
  • OpManager: Introduced new 'Real Browser Monitoring' option as a subtab under Applications > User Experience tab on the dashboard. Additionally, the same subtab has a further option to 'Add Real Browser Monitor'.
  • OpManager: A new dashboard widget named 'Application Monitors Health Summary' has been introduced, to give the user an overview of application monitors' status.
  • OpManager: Henceforth, when Applications Manager plugin is identified as down (via Self Monitoring), OpManager will automatically make a configured number of attempts to restart the plugin.
  • OpManager: Introduced three new Alert Rules - SQL Server Transaction Log, Storage Server, and VMware Datastore, for predicting resource utilization using Forecast Alerts.
  • OpManager: Previously, for versions 128182 and above, the alarm suppression option appeared disabled on the configuration page when scheduled. This issue has been fixed now.
  • OpManager: Previously, there were issues in restoring OpManager Probe database backups if custom columns had been added to the IP Address Manager or Switch Port Mapper. This has been fixed now.
  • OpManager: Previously, in Default reports, the "Email this Report" action generated Alert and Event reports with partial data. This has been fixed now.
  • OpManager: Previously from version 128152, there was an issue with triggering alarm escalation rules when a Group or Probe filter was applied. This has now been fixed.
  • OpManager: For Thick Access Points, the device category has been changed from 'Wireless Access Point' to 'Wireless'.
  • OpManager: Previously, users were unable to add devices to Zoho/Google Maps via CSV import option if the same device exists in the Business View. This issue has been fixed now.
  • OpManager: Previously, there were issues in fetching the serial number for IBM AIX server via CLI during scheduled discovery. This has been fixed now.
  • OpManager: Users can now set In speed/Out speed as 0 mbps under Device snapshot > Configure Interface page.
  • OpManager: Henceforth, the "Interface up and responding" alarm will also contain the last downtime information.
  • OpManager: Interface graphs will now be accessible from the Interface snapshot > Monitors page.
  • OpManager: Users can now view the VPN Tunnel name instead of tunnel IP Address for Fortinet firewall devices.
  • OpManager: Previously, the Interface availability alarms will not be generated if the 'Generate Alarm if unavailable for consecutive time(s)' (under interface threshold settings), is set other than the default value. This issue has been fixed now.
  • OpManager: Previously, there were incorrect error thrown when updating an existing IP address to a device. This issue has been fixed now.
  • OpManager: Henceforth, users can update the threshold of VPN monitors in a Firewall device.
  • OpManager: The SSID and Client details were not displayed for WLC device for business view scope user, if the WLC device is added in multiple business views. This issue has been fixed now.
  • OpManager: Previously, there were issues in fetching the 'Availability Statistics' graph for Windows Service monitor. This issue has now been fixed now.
  • OpManager: The thread count for the daily scheduler of Adaptive Thresholds, has now ben reduced from 10 to 5, to reduce resource consumption.
  • OpManager: Previously, in some instances, there was an issue in which Adaptive Thresholds could not be properly added/associated to a device during discovery, despite being enabled on the corresponding Device Template. This issue has now been fixed.
  • OpManager: In Cisco and HP Aruba Switch stack monitoring, the severity of role and state change alerts have been changed from Critical to Attention.
  • OpManager: OpManager can now ingest events from External applications, even if the corresponding element is not being monitored.
  • OpManager: From version 128152, the dials on the alarms page were displayed in green, rather than showing the appropriate severity levels. It has been fixed now.
  • OpManager: Henceforth, for all the tickets raised in ServiceDesk Plus On-Premises because of the Test Action, a sample message will be appended to inform that "This is a Test Action".
  • OpManager: Previously, alerts were raised for VMware Events despite deleting the particular event from Settings > VMware Events page. This issue has been fixed now.
  • OpManager: The VMs of VMware and HyperV that were selected for discovery, were automatically de-selected during a manual 'Update Inventory' action, if they were not discovered previously. This issue has now been fixed.
  • OpManager: Previously, in some cases, while disabling Adaptive Thresholds globally, the adaptive thresholds associated with Response Time and Packet Loss monitors were not removed completely. This issue has now been fixed.
  • OpManager: Previously, in some cases, a Custom SNMP Monitor could not be associated to an existing Device Template due to an internal issue. This has been fixed now.
  • OpManager: In some cases, the RAM size for servers using SNMP was not calculated properly due to a different OID response. This issue has been fixed now.
  • OpManager: Previously, a threshold violation alert was raised when clicking 'Test Monitor,' even if the device was unmanaged. This issue has now been fixed.
  • OpManager: In some environments, push notifications on the Android mobile app were failing due to connection timeouts. This issue has now been fixed.
  • OpManager: Previously, in a few cases, the Advanced Report XLSX file was generated with multiple headers. This issue has been fixed.
  • OpManager: Previously, Advanced reports were exported in a different language than the client’s language. This has been fixed.
  • OpManager: Previously, the report builder failed to fetch data for a business view user, with multiple interfaces for the same device. This issue has been fixed.
  • OpManager: Previously, multi-instance monitors encountered XLS failures due to data mismatch. This has been fixed now.
  • OpManager: Previously, scheduling Interface At a Glance, and Bandwidth utilization reports failed if there were Japanese characters in the schedule name. This issue has been fixed.
  • OpManager: Previously, start and end times were not available in health report PDFs. This has now been fixed.
  • OpManager: Users can now create custom Graphical Reports for Device and Interface Groups from their respective snapshot pages
  • OpManager: The following new report types have been introduced for Devices report builder: Individual, Stacked, and Average.
  • OpManager: The following new report types have been introduced for Interfaces report builder: Individual and Stacked.
  • OpManager: Previously, while associating the device credentials from the Device Snapshot page, the 'Test Credential' option was missing for "Unknown" devices. This option has been added now.
  • OpManager: Introduced a 'Filter By' functionality to the Script Monitoring template association page under Settings > Monitoring > Script Templates > Associate.
  • OpManager: Scheduled reports can now be configured by users to be saved in a shared folder.
  • OpManager: Wireless LAN Controller (WLC) discovery has been optimized to overcome the slowness observed when fetching the associated Access Points.
  • OpManager Storage Monitoring: Monitoring Storage Devices via REST API is now supported via the Proxy Server configured in OPM.
  • OpManager Storage Monitoring: Previously, port alerts for the SNIA FCMGMT FC Switch template did not include the port name. This has now been included.
  • OpManager Storage Monitoring: Previously, Pure Storage capacity was reported as 0 if the API version was above 2.8. This issue has been fixed.
  • OpManager Storage Monitoring: Previously, the Advanced Reports criteria pattern did not update properly when the criteria count exceeded 10. This has been fixed.
  • OpManager Storage Monitoring: Previously, adding a Dell EMC Unity Storage Device failed due to a hostname mismatch in the SSL certificate. This issue has been resolved.
  • OpManager Storage Monitoring: Previously, there was an issue where the firmware version was not available for Synology Storage Devices. This has been fixed.
  • OpManager Storage Monitoring: Previously, storage pool utilization was reported incorrectly for Hitachi and Huawei Storage Devices. This issue has been resolved.
  • OpManager Storage Monitoring: Previously, CPU usage was reported incorrectly for EMC Isilon Storage Devices. This issue has been fixed.
  • OpManager Storage Monitoring: Previously, adding HPE Nimble Storage Devices failed in some cases. This has now been fixed.
  • OpManager Storage Monitoring: Lenovo Storage Devices monitoring is now supported in OpManager.
  • Enterprise Edition: Previously, the Discovery Rule Engine page in Central doesn't list the devices based on the probe filter. This issue has been fixed now.
  • Enterprise Edition: Previously, there were issues accessing device snapshots and probe-based actions in the central interface during certain failover scenarios. This has now been fixed.
  • Enterprise Edition: Previously, from version 128261 onwards, Business View and Interface Group admin users were able to clear and delete the alarms raised in the Central server. This issue has been fixed now.
  • Enterprise Edition: Users can now remove the Custom Performance Monitor(s) from the Central, under Settings > Monitoring > Performance Monitors.
  • OpManager MSP: Previously, the deleted interfaces were not discovered from Interface discovery page although 'Discover deleted interface' option is enabled. This issue has been fixed now.
  • OpManager MSP: Henceforth, in the Central, the "Threshold Settings" will now be displayed on the Quick Configuration Wizard of the chosen Probe.
  • OpManager MSP: Henceforth, in the Central, the "Diagnostics" will display the data for the selected Probe.
  • OpUtils: Users can now utilize the new DHCP MAC Filtering feature on Microsoft DHCP Servers to allow or deny network access to a list of devices.
  • OpUtils: Previously, there was an issue discovering subnets from routers using SNMP v3 via the Router page, under Settings. This has been fixed now.
  • OpUtils: Previously, there was a sudden memory spike while scanning the switches. It has been fixed now.
  • OpUtils: Previously, OpManager's UI would go blank for users with custom roles, limited to IPAM and SPM modules. This issue has now been fixed.
  • NCM: The "PCI Review" feature has now been renamed as "Configuration Review".
  • NCM: The API for viewing pending Upload Requests has been renamed from "approveRequestPrerender" to "pendingRequestPrerender".
  • NCM: Previously, the "Configuration Upload Request" was not getting resolved when the "Approve from NCM" action was executed. Similarly, the "Configuration Upload Request" was not getting approved/rejected when executed from ServiceNow. This issue has now been fixed.
  • General: The option to enable Rest API access on the Probe server is now supported for users synced from the Central server. Additionally, administrators with complete access can edit the login allowed users in Probe and update Rest API access.
  • General: Failover support is now extended to Linux enviornment as well with MSSQL and Remote PgSQL databases.
  • General: Failover now allows configuration across multiple subnets, with two new connection types: Virtual Hostname (usable for both the same and different subnets) and None (indicating no common address) between primary and secondary servers.
  • General: An invalid redirection link was displayed as the header on the mail server alarm's short snapshot page. This issue has been resolved.
  • General: Previously, in version 128317, the NOC view would result in a blank screen when displayed on higher resolution screens or when zoomed out. This issue has now been fixed.
  • General: In the Notification Template, the use of the special character "&" was previously restricted by client-side validation. This issue has now been fixed.
  • General: After upgrading to version 127257 or above, the SMPP SMS settings that were configured in version 127256 or below did not work. This issue has now been fixed.
  • General: Previously, in versions 128399 and later, there was an issue while restoring backup data. This issue has now been fixed.

Build 12.8.400 - October 17, 2024

  • OpManager: Introducing 'Traffic insights' for the interface Alarms of Routers, Switches, and Firewalls. This sections contains in-depth information on top traffic, application, and conversation data from the Flow Analysis module.
  • Enterprise Edition: In the OpManager Central server, the added device count for the FireWall Analyzer add-on was incorrectly displayed in the "About" tab. This issue has now been fixed.

Build 12.8.398 - October 14, 2024

  • OpManager: Support for BGP Monitoring metrics has been added.
  • OpManager: A new filter option has been introduced in the Tree View Dashboard Widget.
  • OpManager: A new sorting option has been implemented in the Devices Down Dashboard Widget.
  • OpManager: In reports, data forecasting has been improved for better results.
  • OpManager: Henceforth, Hardware Information (such as Serial Number, OS Details, Memory Size, MAC Address, etc.) will be retrieved, and Hardware Monitoring will be performed for devices belonging to major vendors.
  • OpManager: Introduced a new 'Alert on hardware information change' option under Settings > Monitoring > Monitor Settings. When this option is enabled, any changes to hardware details will be raised as alerts (with 'Attention' severity).
  • Enterprise Edition: OpManager now supports monitoring up to 2,500 devices per probe. Click here for more details.
  • OpManager: Users can now import devices into existing or new groups automatically through CSV discovery.
  • OpManager: Additional time filters have been introduced in OpManager reports including, last 60 days, last 90 days, last 3 months, last 6 months, last quarter, and this quarter.
  • OpManager: Labels have been introduced in the HeatMap widgets to display Device and Group names.
  • OpManager: Groups can be created automatically based on devices having similar custom field properties.
  • OpManager: A new "Value Type" filter option has been added to the 'Traffic' and 'Utilization' graphs for interfaces. Users can now select between minimum, maximum, or average values to display in the graph.
  • OpManager: Agent-monitored devices that are rebooted during the downtime schedule generate false availability alerts during the first availability poll after the downtime. This issue has now been fixed.
  • OpManager: The monitoring agent's data-sharing request to the server failed with Windows error '12175' and 'buffer was too small' in some environments. This has now been fixed.
  • OpManager: In OpManager Enterprise Edition, users were unable to download the OpManager agent installable ZIP file from the probe's Deploy Agent page when any of the probe's properties were updated in Central. This issue has now been fixed.
  • OpManager: During VxRail discovery, there was an issue mapping VxRail cluster to their vSAN in some cases. This has now been fixed.
  • OpManager: Users can now fetch and add the existing IPSLA monitors from the source device using SNMP read-only permissions.

Build 12.8.349 - November 27, 2024

  • General: Due to some format changes in the SDP MSP API, categories field from version 14800 could not be fetched. This issue has now been fixed.
  • OpManager: Previously, due to an internal issue, forecast alerts were raised even if the configured thresholds were not breached, resulting in false alerts. This issue has now been fixed.
  • OpManager: Previously, there were duplicate threshold alerts generated for performance monitors due to an internal issue in scheduled discovery. This has been fixed now.
  • OpManager: Bulk device deletion fails if all the selected devices exist in any of the Add-on modules (such as NCM, OPU, etc.). This issue has been fixed now.
  • OpManager: Previously, in some cases, OpManager used to restart automatically due to the JVM's meta space issue. This issue has now been fixed.
  • OpManager: From version 12.8.235, alerts were triggered for role changes in member switches of a switch stack. These alerts are now disabled by default.

Build 12.8.348 - October 24, 2024

  • OpManager : Previously, for versions 128182 and above, the alarm suppression option appeared disabled on the configuration page when scheduled.This issue has now been fixed.
  • OpManager: Previously, there were issues in fetching the 'Availability Statistics' graph for Windows Service monitor. This issue has now been fixed now.
  • Enterprise Edition: Previously, the Discovery Rule Engine page in Central doesn't list the devices based on the probe filter. This issue has been fixed now.
  • OpManager: Users were unable to import devices to Google/Zoho map if the same devices exist in the Business View. This issue has been fixed now.
  • OpManager MSP: The device summary page accessed from Central, will now fetch the data from Probe to avoid discrepancy.
  • OpManager: In Cisco and HP Aruba Switch stack monitoring, the severity of role and state change alerts have been changed from Critical to Attention.
  • OpManager : Wireless LAN Controller (WLC) discovery has been optimized to overcome the slowness observed when fetching the associated Access Points.

Build 12.8.347 - October 01, 2024

  • OpManager: Enabled the Settings sub-menu for NCM in OpManager setups.

Build 12.8.346 - September 24, 2024

  • General: The colors corresponding to the alarm severities can now be customized under Settings > System Settings > Severity.
  • Enterprise Edition: The custom severity colors can be configured in the Central, and the same settings will be automatically synchronised to the Probe(s).
  • OpManager: The custom color severities as configured under Settings > System Settings > Severity, will also be reflected in the mobile application.
  • General: Previously, from 128332, exporting reports in Excel format from the UI or via scheduled reports failed. This issue has been fixed now.
  • General: Previously, Tomcat's default error page appeared instead of the application's custom error page when an invalid resource was accessed without a proper session. This has been fixed.
  • OpManager: Introduced Script Monitoring support for Agent-monitored devices. This script can be configured to execute either on the local machine (OpManager installed server) or on the remote (monitored) machine.
  • OpManager: Users will now be able to create custom widgets and add them to their dashboard.
  • OpManager: The data in an Advanced Report can now be rendered as a Widget on the dashboard.
  • OpManager: From version 126148, threads were being unnecessarily spawned whenever an APM plugin alert was generated. This has been fixed now.
  • NetFlow: Previously, from 128179, an error message was displayed when creating a custom dashboard with IPAM widgets. This issue has been fixed now.

Build 12.8.345 - September 17, 2024

  • OpManager: In-depth monitoring of Load Balancers is now supported for F5 devices.
  • OpManager: Previously, while discovering storage devices using SNMP, they would sometimes not get added due to an internal thread lock issue. This has been fixed now.
  • OpManager: Previously, the displayed values of hardware monitors (Cisco ASR/ISR/ASA/NCS and Palo Alto devices) were sometimes wrongly rendered because the Precision OID value was not considered. This has been fixed to portray accurate values now.
  • OpManager: For devices monitored using WMI, CLI, and Agents, introduced two new columns under the 'Active Processes' tab of the device snapshot page to show "CPU" and "Memory" percentages.
  • Enterprise Edition: Previously, the Probe Server would update IPMI's collected data to the Central Server after every poll. Henceforth, this update will occur only if there is any change in the data.
  • OpManager: Previously, if the date format contained a single quote character, the graph data of a device performance monitor couldn't be exported as an Excel report. This issue has been fixed now.
  • OpManager: Henceforth, whenever a device is converted to be monitored using agent, the failure alert entries corresponding to its previous configuration will now be cleared from the DCM.
  • OpManager: Henceforth, in instances of VMware discovery or rediscovery failure due to an internal exception, the subsequently raised failure alert message will now provide a clear reason instead of just displaying the exception details.
  • OpManager: Nutanix Cluster discovery using the Controller VM IP Address has now been restricted. Henceforth, if the user provides the Controller VM IP address, the corresponding Cluster IP address will be retrieved, and discovery will be attempted.
  • OpManager: In some instances, when a Nutanix credential failure occurred, the subsequent failure alert contained raw HTML code. This has been fixed now.
  • OpManager: Previosuly, VMware VXrail discovery used to fail in some instances. This has now been fixed.
  • OpManager: Threshold configuration is now supported for Hardware Monitors.
  • OpManager: Previously, whenever alarms were suppressed for a device, upon enabling the alarms again, the subsequent polling for hardware metrics failed to raise alerts. This has been fixed now.
  • Enterprise Edition: Henceforth, in the Central, the Probe view will contain the APM plug-in data as well. Clicking on these monitors will redirect the user to the Probe console.
  • OpManager: Previously, there were redirection issues while clicking on application monitors (from Dashboard widgets, inventory, etc.). This has now been fixed.
  • OpManager: Introduced an option to search for Monitor Groups of Applications Manager plug-in while configuring the scope of a user in the User Management page.
  • OpManager: Previously, due to an internal issue, the monitored Databases could not be deleted from the MSSQL tab of the corresponding MSSQL server snapshot page. This has been fixed now.
  • OpManager: Previously, the technician details were not displayed in the alarm-related widgets. This has now been fixed.
  • OpManager: Previously, whenever a particular task was deleted from a workflow, the subsequent tasks were also deleted. Henceforth, only the selected task will be deleted, and the retained tasks can be interconnected.
  • OpManager: Previously, when forecasting trends for a performance monitor that is monitored in percentages, the graph and the table would sometimes display values exceeding 100%. This has now been fixed.
  • OpManager: Previously, in failover setups, the folder containing the ML Model output was flagged in the File Integrity alert. This has now been fixed.
  • OpManager: The following JAR packages have been upgraded - Minlog (minlog-1.3.1), Snappy Java (snappy-java-1.1.10.5) and Kryo (kryo-4.0.3).
  • OpManager: Introduced a new "Forecast Alerts" feature that raises pro-active alerts so that users can plan resource utilization accordingly. Disk Utilization rule has been added as the first forecast rule in this feature.
  • OpManager: In Advanced Report, duplicate entries were generated for Notification, Monitors and Credential sub module reports. This has been fixed now.
  • OpManager: In the individual graphs of monitors with multiple instances, data would be displayed only for one instance instead of all instances. This has been fixed now.
  • OpManager: Previously, in MSSQL setups, when a large time frame was selected in the Report Builder for individual graphs, some rows of data would be duplicated. This issue has been fixed now.
  • OpManager: When a report was viewed in the first week of a month, with the time frame set as "Last Week", the report did not contain any data. This issue has now been fixed.
  • OpManager: Previously, on exporting Advanced Reports as an XLS file, the numerical data was rendered as String text. This issue has been fixed now.
  • OpManager: In versions 128264 and later, the Rule dropdown was not clickable in the Capacity Planning Reports. This issue has been fixed now.
  • OpManager: In versions 128247 and later, the 'Copy As' operation was not functional in the ranged reports (Top N, Bottom N). This issue has been fixed now.
  • OpManager: Previously, in some cases, an SDPOP request could not be closed from OpManager since closure comments alone were sent from OpManager. This issue has now been fixed by sending both closure comments and status change comments.
  • OpManager: Previously, while configuring a Custom Integration, the value field of the 'Request Header' could only take in 255 characters. This has now been extended to allow 1000 characters.
  • OpManager: Previously, from version 127257 and above, there was an issue in applying the standard edition license. This has been fixed now.
  • OpManager: The exported PDF of URLs Availability Report will now have a dedicated URL column.
  • OpManager: Previously, there was an issue where the scheduled process monitor reports (under Health and Performance Reports) were not generated. This has now been fixed.
  • OpManager Storage Monitoring:From now on, new Hardware Status Monitors are supported for HPE StoreOnce devices.
  • OpManager: In versions 127317 and later, selected columns could not be deleted from an Advanced Report if the report was created before upgrading to version 127317. This issue has now been fixed.
  • OpManager: For Linux installations, from version 127316 and above, trap processing had stopped when the trap limit exceeded 50,000 due to an internal issue. This issue has been fixed now.
  • OpManager: Previously, the traceroute action (under device snapshot page) will be performed with the DNS name irrespective of IPAddress/DNS value set in the 'Poll Using' configuration. This has been fixed now.
  • OpManager: Previously, there were inappropriate data transfers involving Switch Stack Port details, from the Probe to the Central server during Switch Stack Polling. This issue has now been fixed.
  • OpManager: During Firewall device rediscovery, the device Display Name (if modified) and Uplink Dependent device configurations were lost due to an internal issue. This has now been fixed.
  • OpManager: Previously, if a device contained sub-interfaces, new interfaces could not be discovered during scheduled interface discovery for that device. This has been fixed now.
  • OpManager: Previously, an incorrect Sample File was displayed in the "Configuration > Custom Fields > Interface Fields > Import Values" page. This has now been fixed.
  • OpManager: Previously, when exporting default reports as PDF, the OpManager logo appeared on all pages. From version 128345 onwards, the logo would be present only on the first page.
  • Enterprise Edition: The 'Ping' and 'TraceRoute' actions have now been added to the device snapshot pages in the Central server.
  • Enterprise Edition: Henceforth, selecting a Probe from the Unified Console View (UCV) of the Central server, and performing an action 'in a new tab' will retain the Probe selection in the new tab.
  • Enterprise Edition: Previously, whenever a 'Process Monitor Template' was deleted from one Probe, the template would also be deleted from all other Probes. This has now been fixed.
  • Enterprise Edition: Previously, in builds migrated from Essential Edition, there were issues in associating interface templates from the Central Server to the Probe. This has now been fixed.

Build 12.8.344 - September 09, 2024

  • General: Upgrade Manager, an enhanced Smart Upgrade feature, has been introduced to facilitate the upgrade process with support for Standalone edition, Failover setups, and the APM Plugin, with additional improvements for the OpManager Enterprise edition.
  • OpManager: Previously, in Device Scan under Cisco Tools, users faced a scrolling issue. This has now been fixed.
  • OpUtils: In the IP Address Manager module under DHCP server, search capabilities have been added for easier DHCP server identification
  • OpUtils: Previously, users faced search and sort issues in the DHCP Summary, Scope Details, and IP details tabs. This issue has now been resolved.
  • OpUtils: Clicking on a scope address under the DHCP Scope Details tab now navigates to the IP Details page and applies the DHCP address filter.
  • OpUtils: There was a page refresh issue in the IP Address Management page while scanning subnets. It has now been fixed.
  • OpUtils: The scheduler configuration page under IP Address Management (IPAM), and Switch Port Mapper (SPM) has been improved to simplify the task addition process.
  • OpUtils: The default scheduler name in Switch Port Mapper has been renamed from "Default Group" to "Default Task" to prevent inventory confusion.
  • OpUtils: Previously, a scoped user had issues adding schedulers in Switch Port Mapper. It has been fixed now.
  • OpUtils: Previously, in Rogue Detection, the severity filters for rogue, trusted, and guest worked only for a single click. This has now been fixed.
  • OpUtils: Previously, in the IP Address Manager Donut view, the filters for NIC Type were not working correctly. This issue has been fixed.
  • OpUtils: Previously, an issue occurred when many filters were selected in the IP Address Manager's Donut view for NIC Type. This issue has been fixed.
  • OpUtils: Previously, in the IP Address Manager's Donut view, an issue occurred in the AD tab when both AD and NOT IN AD options were selected. This issue has been fixed now.
  • OpUtils: Previously, there was an issue in the Horizontal Bar Chart in the Alerts tab, under Network Monitor. These issues have been fixed.
  • OpUtils: Previously, there was an issue while sorting on the 'Added time' column in Rogue Detection for severity levels of rogue and trusted devices. This issue has been fixed.
  • OpUtils: Previously, there were issues with sorting and searching the Status column, and the Monitoring status column in the Network Monitor's Device tab. This has now been fixed.
  • OpUtils: Previously, sorting and searching in the severity column in Network Monitor's Alerts tab resulted in undefined values. This issue has been fixed.
  • OpUtils: Search option has been added to the 'Status' column in Bandwidth Monitor.
  • OpUtils: Previously, the Rogue Detection page became unresponsive when selecting sub filters and changing severity. This issue has been fixed.
  • OpUtils: Previously, there was a filter issue in the Donut view widget in the SPM tab, under Alarms. This has now been fixed.
  • OpUtils: A new option has been added under Settings->General Settings called Server Settings. This tab allows you to change the port of a running service in OpUtils.
  • OpUtils: Previously, there was an issue with updating the DHCP Scope name for an existing scope while scanning the DHCP server. This has been fixed now.
  • OpUtils: Previously, in IP Address Manager, the Custom Column values were lost when a new MAC address was mapped to an existing IP address. This issue has been fixed now.
  • OpUtils: The colour for the availability status in the IP Address Manager's heat map widget has been changed to green.
  • OpUtils: The row color for DHCP Reserved Status of IP addresses in the IP Address Manager has been changed.
  • OpUtils: Previously, admin privilege restrictions affected users with write role permissions. Users can now perform write operations if it is configured in their role.
  • OpUtils: Previously, in the Ports tab under Switch Port Mapper, there was an issue in the ifAlias column. This has been fixed now.
  • OpUtils: Previously, there was an issue where the bandwidth monitor status was marked "down" for all devices. This has been fixed now.
  • OpUtils: Previously, there was an error in trace route responses for low latency devices. This has been fixed now.
  • OpUtils: Previously, in the IP details snapshot page, there was an issue with sorting and searching in the AD Domain column. This has been fixed now.
  • OpUtils: Previously, free users could add more than one switch for Switch Port Monitoring in the OpManager Probe, causing users to encounter a license violation page when logging in. This has been fixed now.
  • Firewall: Policy optimization report was not loading properly when we use the 'Fetch Config' option. This has been fixed now.
  • Firewall: Previously, the total count of NAT rules was incorrectly displayed on the Overview page for device group cases due to an issue. This issue has been resolved.

Build 128335 - September 24, 2024

  • General: Previously, from 128332, exporting reports in Excel format from the UI or via scheduled reports failed. This issue has been fixed now.
  • General: Previously, Tomcat's default error page appeared instead of the application's custom error page when an invalid resource was accessed without a proper session. This has been fixed.
  • NetFlow: Previously, from 128179, an error message was displayed when creating a custom dashboard with IPAM widgets. This issue has been fixed now.
  • OpManager: Previously, there were inappropriate data transfers involving Switch Stack Port details, from the Probe to the Central server during Switch Stack Polling. This issue has now been fixed.

Build 12.8.333 - August 30, 2024

  • Enterprise Edition : In Flow Analysis, Interface sync issue in central, caused by duplicate Router IPs across multiple probes, has been resolved.

Build 128332 - August 28, 2024

  • General: Users in the "Protected Users" security group can now log in using Kerberos authentication when auto-login is enabled during AD authentication.
  • General: Option to enable proxy server support for SMTP Mail Server Communication if proxy enabled in the product.
  • General: A subscription form has been introduced in the product to receive notifications about security vulnerabilities.
  • General: Previously, in the Custom SMS Gateway settings, enabling the 'Encode message into Unicode' checkbox did not save the setting. This has been fixed now.
  • General: Business View widget had unnecessary white space in dashboard and NOC view. This has been fixed now.
  • General: From version 127313, the notification profiles for NCM backup failure alarms were not triggered. This has been fixed now.
  • OpManager: Previously, from version 127257 and above, there was an issue in applying the standard edition license. This has been fixed now.
  • OpManager Plus: Custom fields from other modules, such as Network Configuration Management and IP Address Management have been unified, and are displayed in both the inventory and the device snapshot page.

Build 12.8.331 - August 21, 2024

  • Enterprise Edition: Fixed an issue related to upgrade failure and NCM Compliance policy sync during upgrade.

Build 12.8.330 - August 09, 2024

  • OpManager: A Remote Code Execution (RCE) vulnerability could be exploited by users with 'Write' access to the 'Deploy Agent' action in the UI. This has been fixed now. [Reported by Daniel Santos. Refer: CVE-2024-5466]
  • General: MSSQL database is now supported for Linux installations.
  • General: Previously from versions 128317 and above, Mail Servers without credentials failed to send emails and displayed an 'Authentication Unsuccessful' error. This has been fixed.
  • General: In builds of versions 128265 and later, the Webhook "Test Action" was not functional. This has been fixed now.
  • OpManager: While configuring the Schedule for a Rediscovery Profile under Settings > Discovery, there were actions related to newly discovered devices. These defunct actions have now been removed.
  • OpManager: Previously, if the interface operational status was 7, it would be shown as N/A in the interface details under Inventory and in the advanced report as well. "Lower Layer Down" status will now be shown instead of N/A.
  • OpManager: Provided an option to edit the "Assertion Consumer URL" field in SAML authentication.
  • OpManager: Previously, a workflow couldn't be saved if the subject field of the workflow's "Send Mail" action contained a '[' character. This issue has been fixed now.
  • OpManager: While integrating OpManager with LAMA, users can now edit the "LAMA URL Name" field.
  • OpManager: The SNR value will now be displayed in the Meraki Radio device snapshot page for Clients.
  • OpManager: Previously, only devices and probes could be added to maps. Now, groups can also be added in Zoho maps/Google maps.
  • OpManager: Basic information about the devices, groups, and probes, can be viewed in the map tooltip.
  • OpManager: Introduced support to receive incoming Webhooks that ingest events directly from the Meraki Controller.
  • OpManager: Flap configuration is now supported for events ingested from the Meraki Controller
  • OpManager: Extended bulk threshold configuration support for more monitors under the Quick Configuration Wizard
  • OpManager: Added a new option in the Quick Configuration Wizard to "Dissociate Monitors" from devices in bulk.
  • OpManager: Added a new "ServiceDesk Plus CMDB" audit report, that provides details of the devices synced from OpManager to SDPOP.
  • OpManager: Introduced a new feature that traces, builds relationships between the devices (using data from Uplink Dependency, Virtualization, ADDM from APM Plugin), and pushes this mapping to SDPOP for visualizing the relationship between elements.
  • OpManager: Previously, from version 128248 and above, there was an error in updating the discovery settings. This issue has been fixed.
  • Enterprise Edition: Previously, there was startup slowness in Probes due to querying a table with a large amount of data. It has now been fixed.
  • Enterprise Edition: Now, the central admin will receive an email notification whenever the BCP under the OpManager home folder fails to run.

Build 12.8.320 - August 20, 2024

  • General: Previously from versions 128317 and above, Mail Servers without credentials failed to send emails and displayed an 'Authentication Unsuccessful' error. This has been fixed.
  • OpManager: A Remote Code Execution (RCE) vulnerability could be exploited by users with 'Write' access to the 'Deploy Agent' action in the UI. This has been fixed now. [Reported by Daniel Santos. Refer: CVE-2024-5466]
  • OpManager: Previously, from version 128248 and above, there was an error in updating the discovery settings. This issue has been fixed.
  • Enterprise Edition: Previously, there was startup slowness in Probes due to querying a table with a large amount of data. It has now been fixed.
  • Enterprise Edition: Fixed an issue related to upgrade failure and NCM Compliance policy sync during upgrade.

Build 12.8.319 - July 30, 2024

  • OpManager: Support ID : 9108656: The "Export Cloud Flow" option for AWS VPC Flow Logs is now available in OpManager EE.

Build 12.8.318 - July 19, 2024

  • OpManager: The SQL injection vulnerability identified in the URL Monitoring has now been fixed. [Reported by: CrisprXiang, Cokebeer and LFY. Refer: CVE-2024-6748]
  • OpManager: The ping issues that occurred in the Linux builds of v128317 have now been fixed in this version.
  • OpManager: The applications tab found under the device snapshot page has now been enhanced to retrieve the key performance metrics of the application monitors of the device.
  • OpManager: Added a new discovery criteria "Virtual Type" under the Discovery Rule Engine.
  • OpManager: Previously, due to an internal API migration in AlarmsOne, there was an issue in syncing the alarms from OpManager to AlarmsOne. This API is now supported, and the issue has been fixed.
  • OpManager: An option has been introduced to enable or disable auto discovery for application services such as AD, MSSQL, and Exchange.
  • OpManager: An option has been introduced to associate and dissociate application services like AD, MSSQL, and Exchange in bulk has been added.
  • OpManager: Previously, when Application Monitors were selected from Settings, threshold field was not enabled. This has now been fixed.
  • OpManager: In the Device Snapshot page -> Monitors -> Edit Monitor, there was an issue where threshold details couldn't be saved when the threshold condition was set to "equal". This has been fixed now.
  • OpManager: Previously, there was an issue where the "Adaptive Thresholds" checkbox was incorrectly displayed when adding custom WMI monitors under Device templates. This has been fixed now.
  • OpManager: Previously, in some cases, while performing multiple PPM upgrades, the Monitoring Agents wouldn't be upgraded. This has been fixed now.
  • OpManager: Previously, when reverting to an older OpManager version, the Monitoring Agents were not properly restored. This issue has been fixed now.
  • OpManager: Previously, For Agent-Monitored Devices, Data Collection for an agent would stop in the event of a Monitoring Agent's update failure. This has been fixed now.
  • OpManager: Previously, when a Monitoring Agent ran for a long time, it would stop working abruptly during data collection. This issue has now been fixed.
  • OpManager: Previously, in some cases, the Log File Monitor would not detect the search string when the monitored file content was rotated or when the File Monitor's configuration was updated in the OpManager UI. This issue has now been fixed.

Build 12.8.317 - July 16, 2024

  • General: Previously, versions 12.7 and above faced an issue with launching the standalone MIB Browser tool (MIB Browser.bat). It has been fixed now.
  • General : Previously, some mail servers didn't recognize the "NOOP" command used during communication. To fix this, an option has been provided to ignore the command for smooth communication.
  • General: Henceforth, an alert will be raised whenever the mail server goes down.
  • General: Mail server audit reports are now accessible under Reports -> Mail Server Audit
  • General: Moving widgets up and down within the dashboard is seamless now.
  • OpManager: Timewindow, Delay Trigger, and Recurring Trigger configurations were not updated on devices when the notification profile was associated through the Discovery Rule Engine. This issue has been fixed now.
  • OpManager: The Webalarm Notification Profile did not play audio during "Profile trigger" and "Test Action", if the audio file names contained Japanese characters. This issue has been fixed.
  • OpManager: Clear Notification Profile Triggers were being skipped if a delay schedule was configured for a specific severity of a monitor's down alarm, even if the profile had triggered a down alarm for the same monitor at a different severity. This issue has been fixed now.
  • OpManager: Previously, when Notification profile was triggered, it replaced the $lastPolledValue message variable with a hyphen if its value was absent, causing issues with script processing in the Run Program / Run System Command profiles. This issue has now been fixed.
  • OpManager: When sending a large number of emails, if a delay in mail server connection is detected, OpManager will alert the users.
  • OpManager: If a license ( OpManager with APM plugin) was applied in OpManager before installing the APM Plugin, the plugin license was not stored by OpManager. This has now been fixed.
  • OpManager: Previously, there was an issue in syncing APM plugin license from OpManager Central to Probe if the license was applied via command prompt, from the central. It has been fixed now.
  • OpManager: OpManager now includes enhanced ICMP polling to improve availability monitoring of devices and interfaces. This feature can be activated via an internal flag.
  • OpUtils: The IP Address Management (IPAM) feature now includes the ability to discover subnets from the ipAddrtable.
  • OpUtils: A new mail alert has been introduced for IP Address Management(IPAM), to notify customers about newly discovered subnets for quick review and approval.
  • OpUtils : The DHCP reserved IP addresses will be color coded in IP Address Management.
  • OpUtils : The "NIC type" table has been updated to match the IEEE OUI list.
  • OpUtils : The DHCP reservation count has been removed from the DHCP scope usage alert mail for improved user clarity.

Build 12.8.316 - July 09, 2024

  • General: If the product was installed in Linux devices with non-English OS, attempting to download System Info under the System Performance page resulted in a download failure. This issue has now been fixed.
  • OpManager: Earlier, there was a mismatch in Config Management (NCM) data after upgrading the version of the migrated setup. This issue is fixed now./
  • NCM: Previously, there was an issue in OpManager due to which, the user could not switch between the Vulnerability View, Exposed Devices View, and the Firmware View under Firmware Vulnerability tab. This has now been fixed.
  • NCM: In OpManager, the entirety of the rules associated to a rule group were not listed due to a paging issue. This has now been fixed.
  • NCM: Previously, in all the Central Servers of OpManager editions, clicking on a rule compliance execution would not show the execution results. This has now been fixed.

Build 12.8.272 - January 15, 2024

  • OpManager: Previously, users were unable to add custom fields with multi-byte characters in non-English installations.This issue has now been resolved.
  • OpManager: Previously, the CI sync action used to fail in some cases if ServiceDesk Plus On-Premise was in other languages. This issue has been fixed now.
  • OpManager: After reinstalling the OpManager Agent, some data collection zip files were detected in the File Integrity scan, if they were created but not processed during the previous Agent installation. This issue has now been resolved.
  • OpManager: Previously, the CSV discovery would fail if the CSV file contained non-English characters. This issue was caused by double encoding of non-english characters, and it has now been fixed now.
  • Firewall: Support ID: 10720584 - Compliance standards widget ondemand email option is not working due to space in report name, This issue is fixed.
  • General: Due to some format changes in the SDP MSP API, categories field from version 14800 could not be fetched. This issue has now been fixed.
  • NetFlow: The default rebranding name has been corrected from "Netflow Analyzer" to "NetFlow Analyzer."
  • NetFlow: The default IP groups in Japanese builds have been deleted.

Build 12.8.271 - December 16, 2024

  • General: Previously, there was an issue while deleting bulk subnets from the OpManager Probe's license page. This has been fixed now.
  • General: Previously, the MIB Browser was not responding to low-latency devices when custom SNMP credentials were used. This issue has now been fixed.
  • OpManager: Previously, for versions 128182 and above, the alarm suppression option appeared disabled on the configuration page when scheduled. This issue has been fixed now.
  • OpManager: Previously, the OS and NIC type widget summary data sync from the probe to the central was initiated after every subnet scan, which blocked other sync processes in the central. This has now been fixed.
  • OpManager: Previously, in the Trap Viewer, the trap receiver stopped after it was started, if the user switched to another browser tab or navigated away from the page. This issue has now been fixed.
  • OpManager: From version 12.8.235, alerts were triggered for role changes in member switches of a switch stack. These alerts are now disabled by default.
  • OpManager: Previously, in some cases, OpManager used to restart automatically due to the JVM's meta space issue. This issue has now been fixed.
  • OpManager: Previously, there was a mistranslation in the Alarm Correlation Rules module. This has been corrected now.
  • OpManager: Previously, there were duplicate threshold alerts generated for performance monitors due to an internal issue in scheduled discovery. This has been fixed now.
  • OpUtils: Previously, there was an issue retrieving configuration files in the Config File Manager tool from version 12.8.269. This has now been fixed.
  • OpUtils: Previously, on the switch snapshot page under the Switch Port Mapper tab, the scan functionality did not work when users clicked the Scan Switch icon. This issue has now been fixed.

Build 12.8.270 - October 24, 2024

  • OpManager: Previously, there were issues in fetching the 'Availability Statistics' graph for Windows Service monitor. This issue has now been fixed now.
  • OpManager: Users were unable to import devices to Google/Zoho map if the same devices exist in the Business View. This issue has been fixed now.
  • OpManager: Previously, the global search page displayed a blank page when searching for an existing device, due to a mismatch in custom fields association. This has been fixed now.
  • OpManager: OpManager now includes the downtime duration in the interface up alarm.
  • OpManager: Previously, users were unable to update the Business view when any of its member is in use by the internal scheduler. This has been fixed now.
  • OpManager MSP: The device summary page accessed from Central, will now fetch the data from Probe to avoid discrepancy.
  • Enterprise Edition: Previously, the Discovery Rule Engine page in Central doesn't list the devices based on the probe filter. This issue has been fixed now.
  • OpUtils: Previously, users faced an issue on the IP Management license page. This issue has now been fixed.

Build 128268 - August 16, 2024

  • OpManager: A Remote Code Execution (RCE) vulnerability could be exploited by users with 'Write' access to the 'Deploy Agent' action in the UI. This has been fixed now. [Reported by Daniel Santos. Refer: CVE-2024-5466]
  • OpManager: Previously, the dropdown in the Capacity Planning Reports Rule filter was not clickable. This issue has been fixed now.
  • OpManager: Previously, there was an issue in saving threshold configuration for URL monitors. This has been fixed now.
  • OpManager: Previously, from version 128248 and above, there was an error in updating the discovery settings. This issue has been fixed.
  • OpManager: Previously, if OpManager was configured to use MSSQL, there were issues in sorting devices in the Inventory by 'Display Name'. This issue has been fixed now.
  • OpManager: Previously, from version 127257 and above, there was an issue in applying the standard edition license. This has been fixed now.
  • General: In builds of versions 128265 and later, the Webhook "Test Action" was not functional. This has been fixed now.
  • General: Previously, some mail servers didn't recognize the "NOOP" command used during communication. To fix this, an option has been provided to ignore the command for smooth communication.
  • Enterprise Edition: Previously, credential failure alerts were falsely raised for devices monitored using SNMPV3 credentials. This has now been fixed.
  • Enterprise Edition: Previously, there was startup slowness in Probes due to querying a table with a large amount of data. It has now been fixed.
  • Enterprise Edition: Fixed an issue related to upgrade failure and NCM Compliance policy sync during upgrade.
  • OpUtils: Previously, free users could add more than one switch for Switch Port Mapper in the OpManager Probe, causing users to encounter a license violation page when logging in. This has been fixed now.

Build 128267 - July 23, 2024

  • OpManager: The SQL injection vulnerability identified in the URL Monitoring has now been fixed. [Reported by: CrisprXiang, Cokebeer and LFY. Refer: CVE-2024-6748]

Build 128265 - July 3, 2024

  • OpManager: Network Path Analyzer now supports monitoring the network path from any source (agent device) to destination.
  • OpManager: Henceforth, users will be able to configure thresholds on Packet Loss and Latency for the links between nodes in a Network Path.
  • OpManager: The search option in the Device Templates page doesn't work in some cases due to an internal issue. This has been fixed now.
  • OpManager: From version 128265, in the "Last Polled Value of a Performance Monitor" widget, storage monitors are supported.
  • General: Previously, the Linux users faced an issue where Trace Route was not functional. This has now been fixed.
  • General: Previously, the Generic type for v2 and v3 was displayed incorrectly in the trap viewer. This has now been fixed.
  • OpManager: During custom fields update via CSV, the vulnerable string in the file will be displayed alongwith the error response.
  • OpManager: From version 128247, the Advanced Reports with the "contains" criteria did not work properly. This issue has been fixed.
  • OpManager: During scheduled interface discovery, the interfaces were continued in down state although Admin and Oper status were Up. This issue has been fixed now.
  • OpManager: Previously, under Device downtime report, the start time and end time columns were not sorted properly. This issue has been fixed now.
  • OpManager: Previously in OpManager, there was an issue with hiding the OpUtils and Firewall dashboards in the edit tab action. This has now been fixed.
  • OpManager: In OpManager, the Port View tab has been added to the Cisco ACI device snapshot.
  • OpManager: Previously, there was an issue in saving a Webhook Notification Profile, if a special character from other languages was used in describing the profile. This has been fixed now.
  • OpManager: Henceforth, when virtual devices are synced from OpManager to SDPOP, they will be marked as "Virtual Machine" under the CMDB in the Server CI Type. As a result, these devices will be visible under Assets in the "Virtual Hosts" and "Virtual Machines" CI Types in SDPOP.
  • OpManager: Previously, there was an issue in syncing the IP address of a WLC device from OpManager to ServiceNow. This issue has now been fixed.
  • OpManager: Users now have access to the Connected IP Details report available on the OpManager Switch snapshot page.
  • OpManager: In OpManager, when the switch name is added with different DNS, the OpManager snapshot port view will display sample data.
  • OpManager Plus: In some cases, alarms were not suppressed for specific conditions when alarm suppression was enabled in OpManager Plus. This issue has now been fixed.
  • OpUtils: Previously, users faced an issue on the IP Management license page. This issue has now been fixed.
  • OpUtils: Previously, there was an issue with updating the Fortinet and Huawei routers using CLI device types. This issue has now been fixed.
  • OpUtils: Previously, users faced an issue when searching ports by MAC and DNS. This issue has now been fixed.
  • OpUtils: Previously, users faced an issue with exporting the DHCP server's Scope and IP details. This issue has now been fixed.
  • OpUtils: Previously, there was an issue with the OpUtils Audit custom time-based search. This issue has now been fixed.
  • OpUtils: Previously, under Reports, in the IP Request tool, users faced an issue with selecting Available IPs from the Preferred Subnet, when using the console in non-english languages. This has now been fixed.
  • OpUtils: The OpUtils Audit report API has now been updated as external API.
  • OpUtils: In Switch Port Mapper, the Switch Name employs the resolved DNS name once DNS resolution occurs.
  • OpUtils: Previously, users received emails indicating new MAC addresses were detected, even for existing ones. This issue has been resolved.
  • OpUtils: Previously, there was an issue when renaming the IPAM tree node from its old name. This has now been fixed.
  • OpUtils: Previously, there were alignment issues in the exported PDF and CSV files of IP Details. This has now been fixed.
  • OpManager: Added a new "Test Monitor" option on all the "Add/Associate Performance Monitors" pages to check whether a Performance Monitor is responsive or not, before adding/associating it to a device.
  • OpManager: Introduced a "Search" option and a new column to display the OIDs of available monitors on all the "Add/Associate Performance Monitors" pages.
  • OpManager Storage Monitoring: From version 128265, the Pure Storage(API) devices can also be monitored using v2 REST API.
  • OpManager Storage Monitoring: Introduced monitoring support for Hitachi NAS devices.
  • OpManager Storage Monitoring: New storage monitors for the following device templates have been added: EMC Unity Storage, Pure Storage(API), EMC Isilon Storage, IBM Spectrum Virtualize, Netapp ONTAP(Cluster), IBM DS Series.
  • OpManager Storage Monitoring: Previously, there was a mismatch in Host count and Port count in IBM Spectrum Virtualize devices. This has now been fixed.
  • OpManager Storage Monitoring: Previously, there was an issue in Storage growth trend reports. It has been fixed now.

Build 128264 - June 28, 2024

  • General: Previously, in a few cases, users with restricted privileges/roles encountered an error when trying to edit/customize tabs. This issue has now been resolved.
  • General: Page navigation was not displayed for some widgets within the NOC view. This issue has been fixed.
  • General: Since Microsoft continues to support basic authentication for SMTP mail communication, the OAuth suggestion pop-up has been removed.
  • OpManager: Device Downtime Schedule is now available as a sub-permission within Configuration Settings permission during Custom Role creation. Existing custom roles permission will be assigned accordingly post upgrade.
  • OpManager: In Health Reports, a new filter has been added to select monitors.
  • OpManager: Users can create Advanced reports for both switches and IP addresses via the new module types "Switch Port Mapper" and "IP Address Manager".
  • OpManager: In Advanced Reports, the Switch and port properties from the Switch Port Mapper module can also be viewed under the existing "Devices" and "Interfaces" modules.
  • OpManager: In Alert Notes, only the user who added a note and the Super Admin can perform actions to that note.
  • OpManager: From version 127316, the "Create RCA" option was hidden in the Alarm snapshot tab. It has been fixed.
  • OpManager: From version 128182, the "Suppress Alarm Status" was consistently displayed as enabled even if it was not. It has been fixed.
  • OpManager: Previously, MIBs with different extensions loaded for Trap OID conversion were being unloaded during startup. This issue has now been fixed.
  • OpManager: The Trap processor page failed to load if 5000 rows were selected in the grid. This has been fixed now.
  • OpManager: Previously, during decoding a trap message, MAC addresses got garbled. It has been fixed now.
  • OpManager: Previously, trap alert messages were garbled because the device-level encoding was not applied. This issue has now been resolved.
  • OpManager: A standard pop-up message has been introduced across different modules, to notify the user to configure the Mail Server Settings.
  • OpManager: Optimized the high resource utilization issues caused in the vCenter machine during VMware discovery, rediscovery, and data collection operations.
  • OpManager: From version 128247 and above, exporting the Default reports on a custom time failed. This issue has been fixed now.
  • OpManager: Internationalization issue with the Custom fields CSV import failure message has been fixed.
  • OpManager: Previously, the datacollection for Access Points would fail due to an internal issue during Access Points discovery. This has been fixed now.
  • OpManager: Previously, the Access point snapshot had a tower icon to display the Signal Noise Ratio (SNR). This has now been replaced with a new column 'SNR (dB)'.
  • OpManager: Previously, the alarms from the Business view shortcuts in Business view widget were not redirected to the Alarms page for non-admin users. This issue has been fixed now.
  • OpManager: Previously, the scheduled interface bandwidth report displayed data in bps instead of Kbps/Mbps/Gbps. This issue has been fixed now.
  • OpManager: Previously, there were issues in fetching data in the interface bandwidth report. This has been fixed now.
  • OpManager: Previously, there were columns mismatch in the exported Meraki reports. This has been fixed now.
  • OpManager: Previously, Layer2 Map were not plotted properly using LLDP protocol due to an internal issue. This has been fixed now.
  • OpManager: Previously, unauthorized Meraki CW Series devices were listed in 'Down APs' widget in the Meraki controller snapshot. This issue has now been fixed.
  • OpManager: For agent-monitored devices, the status of the Windows Service Monitors will now be updated instantly within a minute.
  • OpManager: Previously, when devices were deleted in bulk, there was a problem in deleting the corresponding monitoring agents. This issue has been fixed now.
  • OpManager: Previously, some false availability alerts were raised for agent-monitored devices when OpManager got shut down abruptly and restarted. This issue has been fixed now.
  • OpManager: Previously, in the 'Availability, Health, and Alarm Summary' widget, filter issues were faced during redirection. This has now been fixed.
  • OpManager MSP: Previously, when a "%" character was used in the alarm entity, users were unable to clear alarms from MSP Central. It has now been fixed.
  • Enterprise Edition: When unified console is enabled, during the user re-sync process after upgrading to version 127131 or above, if a user with the same name already exists in Probe, the newly synced Central user (with suffix _noc) should be greyed out in Probe UI with no login access. An issue with this behaviour has now been fixed.
  • Enterprise Edition: Previously, in some rare cases, the migration from standalone Enterprise Edition used to fail due to an internal issue. This has been fixed now.
  • Enterprise Edition: Users can now use the Enhanced Smart Upgrade to apply QPPM (Quick PPM) update pack across Central and Probe.
  • Enterprise Edition: Previously, there was an issue in migrating OpManager's Professional builds of versions later than 128248 to Enterprise Edition due to an internal issue. This has been fixed now.

Build 128263 - June 25, 2024

  • OpManager: Users can now execute ping (ICMP) action for multiple devices from both Inventory and Alarms pages.
  • OpManager: Users can now see notes along with recent alarms in the tooltip, on Business View and Maps pages.
  • OpManager: A new option to select and filter the devices with "Not monitored" status has been introduced under Inventory page.
  • OpManager: Users can now rename the template name under Custom device templates page.
  • OpManager: Users can now set the interface speed for an interface group from the Groups list view in the Inventory page.
  • OpManager: In Database maintenance page, the "Maintain recent alarms in the database" option, has been removed now.
  • OpManager: The donut view filter in the Inventory tab previously showed the selected devices count with unit notation. This has been fixed now by displaying the exact value.
  • OpManager: Previously, there were issues retrieving devices under the Inventory tab when filtered by device display name. This issue has now been fixed.
  • OpManager: Previously, the Access points added to device downtime scheduler were automatically managed during an internal scheduled Access point rediscovery. This issue has been fixed now.
  • OpManager: During device rediscovery, if a device has no performance monitors, the monitors from the device template will now be automatically associated. This can be configured under discovery settings.
  • OpManager: Users can view the interface Rx Traffic, Tx Traffic, Rx Utilization and Tx Utilization under the Interfaces tab in the Device Snapshot page.
  • OpManager: A new column to display the Probe name is introduced in the interfaces list view under Inventory page.
  • OpManager: A new criteria 'ifName' is now added in the Interface discovery page.
  • Enterprise Edition: Previously, slowness was observed when pushing discovered devices from Probe to the Central due to an internal issue. This has now been fixed.
  • Enterprise Edition: Previously, in some instances, Hardware information changes were not synced from the Probe to the Central Server. This issue has now been fixed.

Build 128261 - June 13, 2024

  • Enterprise Edition: Clear and delete alarm actions can now be performed on all probes from the central.
  • General: PostgreSQL has been upgraded to version 14.11. The PostgreSQL vulnerability issues from 14.7 have been fixed now.
  • General: From version 128261, a new dashboard view type called "Compact view" has been added, accessible through the System Settings.
  • General: Under Reports->Audit page, a period option has been added in the APIAccess reports.
  • General: An optional field for the Subnet Mask of Virtual IP has been included in the Failover configuration page.
  • General: From version 128261, a unique shared folder will be created during Failover configuration.
  • General: In the old failover model during startup, a maintenance page will be displayed if the primary server's product URL could not be accessed from the secondary server, and vice versa.
  • OpManager: Previously, the status of unmanaged virtual devices were displayed as "unknown", instead of "unmanaged", under the table view of their respective virtualization subtabs, and in the widgets of their parent devices' snapshot page. This issue has been fixed now.
  • OpManager: VMware Datastore removal process has been optimized now for better performance.
  • OpManager: During certain instances, duplicate schedules were being added for VMware event listener. This issue has been fixed now.
  • OpManager: Previously, under the Xen pool snapshot page, the status of hosts and VMs were empty. This issue has been fixed now.
  • OpManager: Previously, even if the events were sorted based on the "VMware events" filter under Alarms -> Events, other VMware-related events were being displayed. This issue has been fixed now.
  • OpManager: VIWMI - VM Memory utilization monitor has now been removed from the "HyperV-VM" template for EXE customers.
  • OpManager: If a HyperV VM has multiple NICs, each with different IPs, then OpManager will now try to discover VMs using all these IPs.
  • OpManager: Previously, during VMware discovery/rediscovery, there were issues causing high resource consumption in the vCenter environment due to multiple container views created. This has been optimized and fixed now.
  • OpManager: Extended Adaptive thresholds support to all the performance monitors.
  • OpManager: Introduced Saudi Arabia domain support (.sa) for ServiceDesk Plus Cloud Integration.
  • OpManager: A new "Value type" filter option has been introduced in the report builder graphs for devices, allowing users to choose between minimum, maximum, or average values to display in the graph.
  • OpManager: The Advanced Report will now feature a new module type "NCM" to let users create reports for NCM devices.
  • OpManager: Within the Advanced Report, NCM device properties will be now available under the existing "Devices" module type.
  • OpManager: Whenever a scheduled report with capacity planning reports was edited, the edit failed and the schedule got deleted. This issue has been fixed.
  • OpManager: From 128247 version, the 'Added' icon near the widget name was not visible while editing the dashboard. This issue has been fixed now.
  • OpManager: Previously, the serial number of Access Point was displayed in the WLC device summary. This issue has been fixed now.
  • OpManager: Under device snapshot page, the 'Update status' action would not work due to an internal issue during Network discovery. This has been fixed now.
  • OpManager: Previously, there were issue in fetching values in the 'Monitors' widget in the VLAN snapshot page. This has been fixed now.
  • OpManager: Previously, when 'Discover deleted interfaces' is opted during interface discovery, the deleted interfaces appeared as stale even after the interfaces were discovered.
  • OpManager: VPN monitor alerts were generated with instance ID of VPN tunnel instead of IP address. This issue has been fixed now.
  • OpManager: Previously, users were unable to remove the email ID under Device downtime scheduler. This has been fixed now.
  • OpManager: The out of memory (OOM) error occured due to Meraki controller bulk SNMP requests sent during Layer2 discovery has been fixed now.
  • OpManager: Previously, there were out of memory (OOM) error due to large Rogue SSIDs associated to the Meraki controller. This issue has been fixed by restricting 10K Rogue SSIDs when discovering Meraki controller.
  • OpManager: The 'Sync Template' option (under Device templates) and 'Sync and rediscover' action (under device snapshot) have been disabled now due to an internal issue.
  • OpManager: Previously, the device availability status shows 'Dependent unavailable' although the parent device is reachable. This issue has been fixed now.
  • OpManager: Previously, the non-admin role users were unable to redirect to the alarms page from the business view shortcuts in the business view widget. This issue has been fixed now.
  • OpManager: Previously, users were unable to update the device template with sysoid criteria when OpManager is installed in non-english OS. This has been fixed now.
  • OpManager: Previously, under OpUtils' central dashboard, there was an issue with sorting widget columns. This has now been fixed.
  • OpManager: Previously, credential failure alerts were sent for devices in the Dependent Unavailable state. This has been fixed now.
  • OpManager: Previously, some devices in Dependent UnManaged status were incorrectly included in the Test Credential Report. This has now been fixed.
  • OpManager: In the discovery rule engine, the unused condition 'implemented' has been removed.
  • OpManager: Previously, there was an issue where OpManager disk space became full due to retaining all the hprof and mdmp files. This has now been fixed.
  • OpManager: Previously, when scrolling the mouse on the credential profile page the timeout value changed. This has now been fixed.
  • OpManager: Previously under Device Template, selecting "Save" or "Cancel" on the Edit threshold page caused the conditions dropdown to be empty when revisiting the page. This issue has been fixed now.
  • OpManager: Previously, after resizing the Storage Overview Widget did not save the changes. This has now been fixed.
  • OpManager: Previously, the Edit scheduled report page did not show "Excluded days" due to an internal issue. This has now been fixed.
  • OpManager: In "The Disk N Exceed Disk Utilization" widget, a description has been added to indicate that it shows data for the Partition Monitor.
  • OpManager: While importing devices via CSV on Google/Zoho Map, the devices which were not imported will now be listed with respective error reason.
  • OpManager: While updating device displayname via CSV, an improper error message was displayed when the file contains unsupported characters. This issue has now been fixed.
  • OpManager: Previously, users were unable to add device due to improper cleanup happened during device deletion. This has been fixed now.
  • OpManager: Previously, there were issues in VMware data collection in a few cases due to discrepancies on monitor rollup type. This has been fixed now.
  • OpManager: New VIWebService monitors has been introduced to monitor datastores, hosts, and VMs efficiently.
  • OpManager: Previously, if a CIType was deleted in SDPOD after syncing the devices from OpManager to SDPOD, an error used to occur during the next CI Fields sync. This issue has been fixed now.
  • OpManager: Previously, if an HTML message format was used to describe a ticket in SDPOP, the same HTML message was also used to log the description of the error in the Notification Report, causing an internal issue to occurr. This issue has been fixed now.
  • OpManager Plus: Previously, in version 128234, an empty slide was overlapping the criteria selection page in Add/Edit Notification profile under the Device Snapshot page. This issue has now been fixed.
  • Enterprise Edition: VMware data insertion in central database has been optimized now for better efficiency.
  • Enterprise Edition: Previously, a few discrepancies were observed in displaying Probe status and the Probe dropdown. This has now been fixed.
  • Enterprise Edition: From version 128261, the System Info page under System Performance in the Central now provides visibility into the incoming data received on each Probe.
  • Enterprise Edition: Previously, there was an issue with generating archive files when a probe started without communication. This issue has been resolved.
  • Enterprise Edition: Previously, users faced issues while syncing custom monitors from probe to central due to monitor ID mismatch. This has been fixed now.
  • Enterprise Edition: Clear and delete alarm actions can now be performed on all probes from the central.

Build 128251 - June 20, 2024

  • General: From version 128248 and above, upgrading the NFADE setup was restricted due to an issue in license edition-product context mismatch check. This has now been fixed.

Build 128250 - June 04, 2024

  • OpManager: A stored XSS vulnerability was discovered in Schedule reports. This has now been fixed.(Reported by Muhammed Mekkawy. Refer: CVE-2024-38870).

Build 128249 - May 31, 2024

  • General: The stored XSS vulnerabilities was identified with the configured proxy server from 128234 version, have now been fixed.(Reported by Muhammed Mekkawy. Refer:CVE-2024-36038)
  • NCM: Now, users can backup, monitor, and compare custom configurations such as VTP, VLAN, etc. similar to how they manage running and startup configurations. Additionally, they can create new custom configurations using templates predefined under MultiConfig templates.
  • NCM: Now, users have enhanced accessibility for managing device templates through an upgraded UI design.
  • NCM: Now, users can conveniently access all configurations available for devices directly from the Inventory page.
  • NCM: Now, by default, Network Configuration Manager supports Aruba Access Point.
  • NCM: Now, Association of devices/device groups is allowed for CIS standard policies.
  • NCM: Marking the CVE status of a device as 'Fixed', 'Resolved', or 'Not applicable' will now also clear the associated CVE alarms for that device. Additionally, alarms for existing CVEs with these states will be cleared as well.
  • NCM: Now, the Note card to allow external database server 'https://ncm.nimbuspop.com/' for EOL, device template, and firmware vulnerability sync under DB Sync Settings in Basic Settings will always be visible.
  • NCM: Now, REST support has been introduced for FortiSwitchOS devices.
  • NCM: Earlier, from version 127102, there was a problem with detecting changes in RFC 3164 compliant syslog messages from third-party syslog servers. This issue has been fixed now.
  • NCM: Earlier, cleared firmware vulnerability CVE alarms were raised again after performing a vulnerability sync. This issue has been fixed now.
  • NCM: Earlier, Network Configuration Manager's security reports (Nipper reports) were restricted for BV users in OpManager setups. This issue has been fixed now.
  • NCM: Earlier, there was an issue with displaying the compliance policy status. This issue has been fixed now.
  • Enterprise Edition: Earlier, users could not create groups or business views in Central with the same names as those in Probe. This issue has been fixed now.
  • Firewall: Added a 'Task Audit' feature that logs all task level changes within the Firewall Analyzer software.
  • Firewall: Support ID: 9641762 - Previously, Cisco Meraki had a device rule parsing issue. This has now been fixed.

Build 128248 - May 23, 2024

  • General: Previously, there were issues with trusting the certificate of external service URLs when Proxy Settings were configured, which affected functionalities which require access to external URLs, like Storage device discovery, Third party integrations, etc. This issue has now been fixed.
  • General: Previously from version 12.7.243, when configuring old model failover for the central server, the primary central server started without any issues. But, the secondary central server encountered a "file not found" exception. This issue has been fixed now.
  • General: Migration from OpManager/OpManager Plus standalone to OpManager Plus Enterprise Edition is supported now.
  • General: In the Run Command / Run Program Notification profile, the output of commands executed will now be displayed in the UI when performing the 'Test action'.
  • OpManager: Introduced a new feature called "Alarm correlation rules" that helps users correlate alarms between different metrics of different devices and interfaces, and raise alerts based on the configured notification profile, when the respective criteria have been breached.
  • OpManager: Previously from version 125415, When the "Notification Profiles Applied by Device" report under Reports>Inventory tab was exported, there was some mismatch in the data. This has been fixed.
  • OpManager: The user interface of the Test credentials page has been revamped for an improved user experience.
  • OpManager: Previously, during VMware discovery/rediscovery, there were issues causing high resource consumption in the vCenter environment due to multiple container views created. This has been optimized and fixed now.
  • OpManager: Switch Stack monitoring is now supported for Cisco Virtual Switching System (VSS).
  • OpManager: Users can now monitor the availability of member switches in a switch stack.
  • OpManager: A New report 'Stack Switch Availability' has been added under Availability and Response reports.
  • OpManager Plus: If "Delete device from modules" option has been enabled, deleting devices from the monitoring module will now result in removal of those devices from Netflow, Firewall, and SPM modules.

Build No 128247 - May 14, 2024

  • General: Previously, CSRF vulnerability (ZVE-2024-1132) was detected where the external users were able to utilize the network tools without authentication to perform ping or SNMP ping on network devices. This has now been fixed. (Reported by Jayateertha Guruprasad).
  • General: Previously, proxy excluded URLs were not being considered for webhook trigger. This issue has been fixed now.
  • OpManager: Within OpManager, when navigated to the switch snapshot page within the network tab, users can view details such as connected devices in the interfaces tab and a comprehensive port view under the port view tab. This information is sourced from the SPM module, which becomes accessible when the IPAM & SPM add-on is activated in OpManager.
  • OpManager: Previously, there was an issue with the probe name being displayed on OpManager's central dashboard. This issue has been fixed now
  • OpManager: Optimised the performance of agent-based monitoring related features, and extended the limit of agent-installed devices to 1000.
  • OpManager: Previously, during certain instances for agent-monitored devices, the CPU utilization monitor's data was not being stored when it's alternate OID 'CPU Utilization ProcessorInformation' was being used on threshold-enabled cases. This issue has been fixed now.
  • OpManager: Previously, in some instances, the "There is some problem with database tables." popup message was being displayed when duplicate tables were created for hardware data collection. This issue has been fixed now.
  • OpManager: Previously, when the URL response time reports were being exported as PDF and XLS, there were alignment issues due to additional columns. This issue has been fixed now.
  • OpManager: Previously, even when IPMI devices were unmanaged, OpManager was still trying to reach the devices for fetching information about the managed server. This has been fixed now.
  • OpManager: The associated notification profiles were not being displayed while editing the URL monitors from Settings -> Monitoring -> URL Monitors. This has been fixed now.
  • OpManager: Serial Number and OS Version are now included for Checkpoint devices under hardware monitoring.
  • OpManager: Choosing Index OID is now not mandatory while mapping display names with the instance values for creating a new custom SNMP monitor.
  • OpManager: Meraki Uplink Monitoring is now supported for Meraki Security devices.
  • OpManager: Introduced new availability and consolidated reports for Kemp load balancer.
  • OpManager: The limit on export and schedule of Trend reports has been removed now.
  • OpManager: While editing the schedule report, the category filter of default reports resets to default category. This issue has been fixed now.
  • OpManager: The character limit has now been increased for the filter option available in advanced reports.
  • OpManager: Previously, users were not able to receive scheduled reports from custom script monitors. This issue has been fixed now.
  • OpManager: Previously, schedule reports failed for device availability dashboard. This issue has been fixed now.
  • OpManager: Previously, the report redirection was not working under the notification profiles page. This issue has been fixed now.
  • OpManager: Previously, users were not able to copy any default reports apart from the Capacity Planning reports and Trend reports. This issue has been fixed now.
  • OpManager: Introduced bulk actions to manage, unmanage, and delete VMware VMs, from their respective vCenter or ESXi snapshot pages.
  • OpManager: Provided a search option under the reasons column of Data Collection Manager's Failed Monitors, Interfaces and Credentials pages.
  • OpManager: Users can now view the device down failure reason in the Device Availability alarms.
  • OpManager: Users can now enable and customize the resolution notes for closing the ServiceDesk Plus On-Premises request status, using the advanced settings option available under the ServiceDesk Plus On-Premises configuration page.
  • OpManager: Previously, Japanese characters were distorted when OpManager alarms were being sent out as messages via Microsoft Teams. This issue has been fixed now.
  • OpManager: ServiceDesk Plus Cloud requests will now be created and cleared with the ServiceDesk Plus Cloud integrated username, instead of the previously used requester name, "OpManager".
  • OpManager: Previously, if the name of the device had special characters, it was not being deleted from ServiceDesk Plus On-Premises, even if it has been deleted from OpManager. This issue has been fixed now.
  • OpManager: Previously, users were not able to add agent-monitored devices, if the device with the same hostname but different domain was already. This issue has been fixed now.
  • OpManager: Previously, the agent-specific alerts related to the agent-monitored devices, were being raised even for unmanaged devices and devices with alarm suppression enabled or downtime scheduled. This issue has been fixed now.
  • OpManager: Fixed the issue related to fetching ServiceDesk Plus MSP accounts and sites in OpManager, caused by the V3 API migration when the ServiceDesk Plus MSP version was above '14200'.
  • OpManager: Previously from version 12.8.152 and above, there was an issue with creating a new workflow with scheduled criteria. This issue has now been fixed.
  • OpManager Storage Monitoring: Previously, for spectra logic tape library devices, the device information was not being displayed properly. This issue has been fixed now.
  • OpManager: Users can now choose to show or hide the traffic of links in a business view through 'Show Traffic' option under link properties.
  • OpManager: Device health status will get updated automatically in the Rack view page.
  • OpManager MSP: Previously, users were unable to create 3D floor view in MSP Central when no probes were added. This issue has been fixed now.

Build No 128238 - June 07, 2024

  • Enterprise Edition: Earlier, users could not create groups or business views in Central with the same names as those in Probe. This issue has been fixed now.
  • OpManager: Previously, during VMware discovery/rediscovery, there were issues causing high resource consumption in the vCenter environment due to multiple container views created. This has been optimized and fixed now.
  • General: Previously, CSRF vulnerability (ZVE-2024-1132) was detected where the external users were able to utilize the network tools without authentication to perform ping or SNMP ping on network devices. This has now been fixed. (Reported by Jayateertha Guruprasad).
  • OpManager: A stored XSS vulnerability was discovered in Schedule reports. This has now been fixed.(Reported by Muhammed Mekkawy.)

Build No 128237 - May 22, 2024

    ​
  • OpManager: Previously from version 12.8.152 and above, there was an issue with creating a new workflow with scheduled criteria. This issue has now been fixed.
  • OpManager: From version 128182 custom field values were not updated if any of these fields are created with a numeric type. This issue occurs during the first update of custom field values for a device or interface. It has now been fixed.
  • OpUtils: Previously, users faced an issue during router scanning. This has now been fixed.

Build No 128235 - April 23, 2024

  • OpManager: Introduced an option that allows users to associate one or more performance monitors to multiple device templates at once.
  • OpManager: Introduced new perf groups and allowed users to add custom monitors for those perf groups, for enhanced reporting of similar monitors.
  • OpManager: Added new device templates - SangFor M5300, Forcepoint LLC & NGFW 1000 series.
  • OpManager: Warm Spare information will now be displayed in the Meraki Security device snapshot.
  • OpManager: Introduced options for sensor-specific suppress/ unsuppress, and enable/ disable actions for hardware monitoring.
  • OpManager: Hardware sensor info consolidated widget is now included in the device snapshot page, provided the device is hardware-supported.
  • OpManager: Users can now discover the Clients and SSIDs for Meraki Radios from its snapshot page.
  • OpManager: SSID status will now be listed under the Meraki Radio device snapshot. Additionally, users can click on the clients count to view the list of clients and its details.
  • OpManager: Users can now discover upto 3000 interfaces through the Interface discovery profile.
  • OpManager: Previously in version 127119, in business view widgets there was an issue with link redirection, when one or two interfaces were selected between two devices. From version 128235 and above, the redirection link will be provided in the tooltip popup.
  • OpManager: Stack Switch Monitoring support for Juniper Virtual Chassis, and Huawei stack switches has been introduced.
  • OpManager: The Applications Manager plugin build number will now be included under the about page.
  • OpManager: Henceforth, when the language is updated in OpManager, the Applications Manager plugin will also be automatically synced with the same, provided the language is supported by Applications Manager.
  • OpManager: Introduced an option for self-monitoring Applications Manager plugin, which will notify users in case the plugin goes down.
  • OpManager: The "Add Real user monitor" has now been brought as a subtab under Applications > User Experience > Real user Monitoring.
  • OpManager: Previously, users were not able to save custom integrations, when the selected HTTPS method was GET or HEAD or DELETE or PATCH. This issue has been fixed now.
  • OpManager: Users can now monitor Meraki CW Series devices under Meraki Controller.
  • OpManager: Previously, the alarm message appeared as a single uninterrupted line. Now, it will be formatted with suitable line breaks, to improve readability.
  • OpManager: Henceforth, users will be able to dissociate the SNMP/ WMI/ CLI credentials, that were previously associated to the device.
  • OpManager: Extended the IPMI monitoring support to include Huawei devices using SNMP and API.
  • OpManager: Previously, users (other than the super-admin) were unable to navigate to Alarms page from a Business View Shortcut on the Business View widget. This issue has now been fixed.
  • OpManager: Previously, the interface Bandwidth Utilization Report would not show any data despite the availability of data. This issue has now been fixed.
  • OpManager: Previously, when an Interface Bandwidth Utilization Report was scheduled in XLS format, it would only contain raw unformatted data. Henceforth, data will be displayed with relevant units instead (Kbps, Mbps, or Gbps).
  • OpManager: Previously, there was an issue while saving the "Execute Linux Script" workflow task with the default command line. This has been fixed now.
  • OpManager: Previously, in versions 128182,128183 and 128234, there was an issue in status polling for CISCO ACI RestAPI devices. This issue has been fixed now.
  • OpManager: Previously, push notifications for the Android app used FCM legacy APIs. It has been deprecated, and from now, the notifications will be sent via the HTTP v1 API.
  • OpManager MSP: Introduced support for Custom integrations feature in OpManager MSP central.

Build No 128234 - April 10, 2024

  • OpManager: The 'Map Settings' have been relocated from Settings -> System Settings to the Maps tab -> Settings icon above the Business view widget.
  • General: After migrating to JRE 1.8.0_362, from version 12.7 and above there were issues with response data compression, if SSL was enabled. This has been fixed now.
  • General: An option to set expiration for the Embed Link generated for Widgets and NOC views is introduced now. The expiration can be configured as Never or set until a period of time.
  • OpManager: Previously, in versions 128182 and 128183, there was an issue in status polling for CISCO ACI RestAPI devices. This issue has been fixed now.
  • OpManager: From version 128234 and above, the device label colour in google maps has been updated.
  • OpManager: In the System Performance dashboard, the widget has been modified from "Polls per Second" to "Polls per Minute", and the polling load will be displayed in polls/minute instead of polls/sec.
  • OpManager: The APNS certificate for iOS mobile application has been updated since the current APNS certificate will expire on May 26, 2024.

Build No 128188 - August 19, 2024

  • OpManager: A Remote Code Execution (RCE) vulnerability could be exploited by users with 'Write' access to the 'Deploy Agent' action in the UI. This has been fixed now. [Reported by Daniel Santos. Refer: CVE-2024-5466]
  • OpManager: Previously, in some instances, the "There is some problem with database tables." popup message was being displayed when duplicate tables were created for hardware data collection. This issue has been fixed now.
  • OpManager: Previously, from version 127257 and above, there was an issue in applying the standard edition license. This has been fixed now.
  • Enterprise Edition: Previously, there was startup slowness in the Probes and data processing delays in the Central due to querying a table with a large amount of data. It has now been fixed.
  • OpUtils : Previously, free users could add more than one switch for Switch Port Monitoring in the OpManager Probe, causing users to encounter a license violation page when logging in. This has been fixed now.

Build No 128187 - August 02, 2024

  • Enterprise Edition: Previously, false credential alerts were raised for devices monitored with SNMPV3 credentials. This has now been fixed.
  • General: Previously, some mail servers didn't recognize the "NOOP" command used during communication. To fix this, an option has been provided to ignore the command for smooth communication.

Build No 128186 - July 24, 2024

  • OpManager: The SQL injection vulnerability identified in the URL Monitoring has now been fixed. [Reported by: CrisprXiang, Cokebeer and LFI. Refer: CVE-2024-6748]

Build No 128184 - April 22, 2024

  • OpManager: Previously, users (other than the super-admin) were unable to navigate to Alarms page from a Business View Shortcut on the Business View widget. This issue has now been fixed.
  • OpManager: Previously, the interface Bandwidth Utilization Report would not show any data despite the availability of data. This issue has now been fixed.
  • OpManager: Previously, when an Interface Bandwidth Utilization Report was scheduled in XLS format, it would only contain raw unformatted data. Henceforth, data will be displayed with relevant units instead (Kbps, Mbps, or Gbps).
  • OpManager: The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on May 26, 2024.

Build No 128183 - April 02, 2024

  • OpManager: OpManager now provides support for Dell VxRail HCI monitoring.

Build No 128182 - March 26, 2024

  • OpManager: Extended the IPMI monitoring support to include H3C devices using SNMP.
  • OpManager: Henceforth, during routine switch stack polling, if data is not found for a particular switch, it will be regarded either as down, or removed from the stack. This switch state will be updated as 'Unknown' and a corresponding alert will be raised.
  • OpManager: Previously, in some scenarios, valid changes in switch stack details were not synced to the Central Server from the Probe. This issue has now been fixed.
  • OpManager: Previously, under Inventory -> Devices, when CPU or memory column was sorted from the "Servers" page, the entire page went blank. This issue has been fixed now.
  • OpManager: Wireless LAN Controller (WLC) monitoring using RestAPI is supported for the following device types: Ruckus SZ Controller , Arista Cloud Wireless Controller.
  • OpManager: From version 128182, users now have the ability to suppress monitor-specific alarms. This feature is applicable to monitors that are listed under the "Monitors" tab on the device snapshot page.
  • OpManager: Device-specific custom field values can now be automatically updated when the custom fields are mapped to custom SNMP or WMI performance monitors.
  • OpManager: Previously, OpManager was unable to fetch more than 1000 users from Slack. This issue has now been resolved.
  • OpManager: Previously, there was an issue with syncing the "name" field of an ESX server from OpManager to ServiceNow. This issue has now been resolved.
  • OpManager: Previously, there was an issue with syncing fields while creating events from OpManager to ServiceNow. This issue has now been resolved.
  • OpManager: Previously, when SDP was configured with a very older version of OpManager, there was an issue when users tried to log in, after OpManager was upgraded. This issue has been fixed now.
  • OpManager: Introduced a new page called 'Add Real User Monitoring', under Applications -> User Experience.
  • OpManager: The 'Apps' tab, found in the device snapshot page has now been renamed as 'Applications' tab.
  • OpManager: For IPMI Monitoring, under the "Add IPMI" page, a test connection option has now been introduced, to check if the credentials provided are valid.
  • OpManager: Introduced business view and group filters for CPU, memory, and disk forecast reports.
  • OpManager: From now, users can add and edit informational notes, in the 'Ignored Devices' tab under Discovery.
  • OpManager: Previously, in OpManager, within the Tools section under Trap Viewer, there was an issue with data display. This issue has now been resolved.
  • OpManager: Previously, in OpManager Central, users faced an issue with selecting a port from the switch snapshot while having "All probe" enabled. This has been fixed.
  • OpManager: Previously, in OpManager Central, on the switch snapshot page under Port View, the export function for switch port data was non-functional when all probes were selected. This issue has been fixed.
  • OpUtils: Previously, there was an issue where the group names list did not appear when updating users in OpManager User Management. This issue has now been fixed.
  • OpUtils: Previously, users faced an issue while creating a new node on the IP Address Manager or Switch Port Mapper Tree View. This issue has now been fixed.
  • OpUtils: Previously, there was a slowdown issue caused by an increase in thread count when scanning subnets too frequently or in bulk. This has now been fixed.
  • OpUtils: Previously, in OpUtils version 128168, under Toolset, in MIB Browser, users faced an issue with performing actions using the SNMPv3 credentials. This has now been fixed.

Build No 128181 - March 15, 2024

  • General: Previously there was an issue in PGSQL to MSSQL migration due to data discrepancies in FirewallRecords table. This issue is fixed.

Build No 128180 - March 14, 2024

  • OpManager: In-depth monitoring of Load Balancers is now supported for Kemp devices.
  • Enterprise Edition: From now, notification profiles created in the central server can be associated to devices directly from the central's device snapshot page.

Build No 128179 - March 06, 2024

  • General: For security reasons, access control restrictions have been implemented for displaying Custom HTML widget content on a Custom Dashboard. Only the owner of the custom dashboard will be able to customize this widget.
  • General: From now, the product edition will be mentioned in the subject/title of the notification mail for Self-Monitoring.
  • General: If Application Manager add-on is in OpManager, the Application Manager_logs will be added to the Support Information File.
  • General: In Japanese installations, The Support Information file can be downloaded and uploaded manually.
  • General: Previously, in the Old model failover, there was a scenario where both primary and secondary services remained up and running when started simultaneously. This issue has now been resolved.
  • General: In Virtual IP based failover, an issue was identified where one of the services would face a startup problem if both primary and secondary services were started simultaneously. This has been fixed now.
  • General: The alarms triggered by the File integrity scheduled scan will be cleared, during manual scans for File Integrity.
  • General: Previously, the Custom HTML widget failed to load the widget's embed URL in the NOC view, when the user has APM module permission. This issue has now been fixed.
    • General: For improved security, access limitation has been enhanced in Mobile app specific endpoint.
  • General: Previously, an administrator user with complete access was able to enable/disable the RestAPI access status of a Super Admin user. This issue has now been fixed. (Reported by Jayateertha Guruprasad)
  • General: For improved security, access limitation has been enhanced in User Management specific endpoints.
  • OpManager: OAuth-related functionalities were not working properly in NFADE and FWADE central servers. This issue has now been fixed.
  • OpManager MSP: To improve scalability, the MSP Central server's default heap size has been increased from 1024 MB to 2048 MB.

Build No 128170 - March 21, 2024

  • OpManager: Previously, under Inventory -> Devices, when CPU or memory column was sorted from the "Servers" page, the entire page went blank. This issue has been fixed now.

Build No 128168 - February 27, 2024

  • General: Users can now rearrange columns, switch tabs without losing pagination, and save column sorting preferences.
  • OpManager: Henceforth, if the APM plug-in is enabled in OpManager, the user can add application monitors to the Business View.
  • OpManager: Previously, the APM alarms used to be mapped to the Application Server that was monitored in OpManager. These alarms will now be mapped to the respective application instead.
  • OpManager: Around 20 device templates with basic monitors have been newly added for a wider support of device models during device discovery.
  • OpManager: Henceforth, An alert will be raised whenever an Access Point is decommissioned from the Wireless LAN Controller.
  • OpManager: Henceforth, the Rogue SSIDs tab will also show the Access Points associated to the respective rogue SSIDs for Cisco WLCs.
  • OpManager: Previously, the data collection doesn't happen for the performance monitors newly associated to the Access points due to an internal issue. This has been fixed now.
  • OpManager: Previously, during WLC discovery, the WLC generic (vendor) template would be associated instead of WLC model specific template. This issue has now been fixed now.
  • OpManager: Previously, the serial number fetched for HP servers during discovery was incorrect. This has been fixed now.
  • OpManager: During scheduled discovery, the maximum timeout for each device discovery has been improved now.
  • OpManager: Previously, users were unable to update device display name via SNMP from the Quick Configuration Wizard, if either the Authentication or Encryption password is empty in the associated SNMPv3 credential. This issue has been fixed now.
  • OpManager: Previously, the racks in the 3D floor view appeared distorted. This issue has been fixed now.
  • OpManager: Previously, when a URL was unmanaged and then later managed again, the monitor displayed 100% availability, even if the URL was down. This issue has been fixed now.
  • OpManager: Previously, when the URL's content type was set to audio, video, or images, device down alerts were raised while parsing the data due to the presence of non-readable characters in the URL body. This issue has been fixed now.
  • OpManager: Previously, while creating custom monitors, if users choose a functional expression, even if decimal data type was selected, only the integer part of the decimal data type was being considered. This issue has been fixed now.
  • OpManager: Under Reports -> Virtual Server Reports -> All Virtual Machines Reports, the VMs that are not monitored will now be listed along with the monitored VMs.
  • OpManager: Previously, during certain instances, when the "bulk data save" option was enabled, the collected data was stored on the raw table of the previous day. This issue has been fixed now.
  • OpManager: Previously, during certain instances, VMware Discovery failed due to improper parsing of the end device response. This issue has been fixed now.
  • OpManager: Henceforth, the new Access Points will be discovered every 6 hours automatically. Additionally, the display name and IP address of the existing access points will also be updated.
  • OpManager: Henceforth, an alert will be generated with "Attention" severity whenever a new Access point is identified during both manual and periodic discovery.
  • OpManager: During the availability polling of Access Points, if an active WLC failed to respond to the SNMP request, a false down alert would be generated for the Access Points. This issue has been fixed now.
  • OpManager: WLC monitoring is now supported for Huawei S6730-H24X6C.
  • OpManager: Trend Reports failed when the Time Period selected to generate the reports was high. This issue has been fixed.
  • OpManager: The 'All Groups' widget on the dashboard will now display the number of problematic members along with the total members count.
  • OpManager: The HeatMap widget in the dashboard can now be configured to display the groups and their status.
  • OpManager: Henceforth, both the Tree view widget in the dashboard and the Tree view pane in the Inventory page will display the number of problematic devices along with the total count.
  • OpManager: A new dashboard widget named 'Availability, Health & Alarm Summary' has been introduced, to give the user an overview of the network status.
  • OpManager: Capacity planning reports are now colour coded for better visibility and understanding.
  • OpManager: Users can create capacity planning rules that include up to four perfgroups. These rules can be used to generate capacity planning reports.
  • OpManager: Henceforth, a new column to display the associated monitor OIDs will be shown in the Add Monitor page of individual Device Templates.
  • OpManager: From version 128152, in Alarms and Events the Device DisplayName was not set properly. This issue has been fixed now.
  • OpManager: In Agent-Monitored devices, there was an issue with false alerts about device availability, when the Agent-Server websocket connection became idle or when the monitoring server shutdown or had network failures. These issues are now resolved.
  • OpManager: 'Agent Down' & 'Agent Not Communicating' alerts for Agent monitoring, are now raised under Critical Severity.
  • OpManager: Previously, alarms for exceeding interface bandwidth were not generated if there was a counter reset error in the respective interface data collection. This issue has been fixed now.
  • OpManager MSP: Previously, In MSP central, there were difference in Availability monitoring interval between 'Device snapshot' page and 'Edit Device' page. Now This issue has been fixed.
  • OpManager Storage Monitoring: A false alert was repeatedly raised about failed credential test for storage devices. This issue has now been fixed.
  • OpManager Storage Monitoring: Previously, HP MSA devices were monitored using SMI protocol, under the HP MSA Storage device template. It has been deprecated, and a new device template HPE MSA(API) is introduced to monitor via API.
  • OpManager Storage Monitoring: Monitoring support has been extended to Dell Powerstore devices.
  • OpUtils: While installing the product for the first time, integration into the Active Directory has been enabled for auto-discovered Domain and Domain Controller Name.
  • OpUtils: Under Active Directory in Settings, a new icon has been enabled to list the AD computers of selected domain in the AD's grid view.
  • OpUtils: Users can now edit DNS names under the IP details tab in the IP Address Manager module, and this name will be updated if the DNS servers provide new names for the corresponding IPs.
  • OpUtils: Under Routers, a display name column has been added to assign customizable names for easier router identification.
  • OpUtils: Previously, users encountered an issue with MIB browser slowness when dealing with a high number of retries and timeouts in SNMP credentials for non-SNMP devices. This issue has now been resolved.
  • OpUtils: Previously, when uploading a new MIB, its components were not updated in the tree view of the MIB browser. This issue has now been fixed.
  • OpUtils: Previously, there was an issue with finding the MIB name within the MIB file due to additional spacing during the MIBs upload. This has now been fixed.
  • OpUtils: Addressed missing nodes of the 'HOST-RESOURCES-MIB' and 'Cisco-Tc' default MIBs. Additionally, new MIBs (RMON-MIB, RMON2-MIB, and TOKEN-RING-RMON-MIB) have been introduced in the MIB Browser.
  • OpUtils: Previously, in the OpUtils add-on, users faced an issue while discovering an IPv6 host. This has now been fixed.
  • OpUtils: Previously, users faced a slowness issue when marking IP status in the IP details section under the IP Address Manager. This issue has now been fixed.
  • Enterprise Edition: In the Central, the devices will be associated to the Group automatically based on the custom field criteria.
  • Enterprise Edition: Previously, there were internal issues while associating the device template of an Access Point from Central to Probe. This has been fixed now.
  • Enterprise Edition: Previously, if Central had the SQL server installed in a language other than English, it incorrectly moved archive files to the unprocessed folder despite those files being successfully processed. This issue has now been fixed.
  • Enterprise Edition: Previously, users could not update the Central's hostname on the probe's central details page, if the existing hostname did not resolve via DNS. This issue has been fixed now.
  • Enterprise Edition: On the new SUM page, the status showed 'Download in progress 100%' instead of 'Download is complete. Ready to update' in some cases even though the PPM file was fully downloaded. This issue has been fixed now.
  • Enterprise Edition: Previously, the probe would repeatedly send archived files to the Central if there were issues in deleting these files on the probe side. This issue has been fixed.
  • Enterprise Edition: Previously, archived files were processed twice in Central if the probe sent these files before Central had completed the startup archiving. This issue has now been fixed.
  • Enterprise Edition: Previously, in the Central server, there was an issue in associating Device Templates directly to the devices. This issue has been fixed now.

Build No 128167 - February 16, 2024

  • OpManager MSP: Previously for versions 128165 and above, there was an issue while adding users in OpManager MSP and RMM. This has been fixed now.

Build No 128164 - February 05, 2024

  • General : Previously, from version 127257 and above, the product failed to restart automatically when MicrosoftSQL database connection re-established after a connection failure. This issue has been fixed now.
  • General: Previously, after opening an Embed NOC view, sometimes the refresh timer displayed a "NaN" symbol and the page froze. This issue has now been fixed.
  • OpManager MSP : Introducing Customer specific user creation with customized roles in the MSP edition.

Build No 128153 - February 19, 2024

  • OpManager: Trend Reports failed when the Time Period selected to generate the reports was high. This issue has been fixed.
  • OpManager: Previously, during certain instances, when the "bulk data save" option was enabled, the collected data was stored on the raw table of the previous day. This issue has been fixed now.
  • OpManager: Previously, during certain instances, VMware Discovery failed due to improper parsing of the end device response. This issue has been fixed now.
  • OpManager Storage Monitoring: A false alert was repeatedly raised about failed credential test for storage devices. This issue has now been fixed.

Build No 128152 - February 1, 2024

  • OpManager: Previously, a Meraki Controller could not be added to OpManager if it had the same IP Address as another Meraki Controller. This issue has been resolved now.
  • OpManager: Henceforth, the Meraki Topology Map will also show the non-Meraki nodes if they exist in the environment.
  • OpManager: Users can now view the interface details of every node in the Meraki Topology Map (if interface details are available).
  • OpManager: If the device displayName contained more than 100 characters, there was an issue with generating an alert for the device. The issue has been fixed by trimming the displayName to comply with the 100-character limit during alert generation.
  • OpManager: Previously, in the events tab under alarm short summary page, the Date/Time column was clipped. This issue has been fixed now.
  • OpManager: Extended VMware monitoring support to include VSAN datastores monitoring.
  • OpManager: Introduced an option in the data collection manager that allows users to generate alerts when performance monitors fail to collect the data consecutively for 'X' number of times.
  • OpManager: Previously, if the VM's OS name was lengthy, the rediscovery action failed. This issue has been fixed now.
  • OpManager: Previously, HyperV Host CPU Core details was not being displayed properly. This issue has been fixed now.
  • OpManager: Previously, users were not able to associate or test the credentials of UCS devices, if their former credentials were deleted. This issue has been fixed now.
  • OpManager: Previously, the VMware-VM boot time update query was getting frequently executed in MSSQL installations. This issue has been fixed now.
  • OpManager: Introduced a proper error message to be displayed when users attempt to associate VMware-VM monitors with VMware-vCenter.
  • OpManager: VMware rediscovery failure alerts will now be cleared after the next successful rediscovery operation.
  • OpManager: IO Module count will now be displayed properly in the UCS device snapshot page.
  • OpManager: Introduced an option that allows users to raise NIC and HBA alerts at ESX level instead of the vCenter level, by enabling a flag.
  • OpManager: VMware parent device inventory update won't be triggered now for the following events: 'DrsVmMigratedEvent', 'VmMigratedEvent' and 'VmRelocatedEvent'.
  • OpManager: The 2D Rack View has been enhanced for improved usability.
  • OpManager: Users will now be able to add units of any size (between 1 to 100) to the Rack View.
  • OpManager: Users can now add custom images to represent the individual units (both peripherals and devices) in the Rack View.
  • OpManager: Henceforth, users can retain the position of the floor view as required. Additionally, OpManager now allows the user to choose either the auto-rotation or manual view.
  • OpManager: The webhook header size has now been increased.
  • OpManager: Previously, in rare cases, SDP Cloud sync failed. This issue has been fixed now.
  • Enterprise Edition: When script monitors are pushed from Central to Probes, entries will now be added to the script details related tables, if they were found to be missing.
  • Enterprise Edition: A discrepancy in status led to the display of an incorrect banner message on the smart upgrade page if the manual upgrade was done after initiating the new smart upgrade. This issue has now been fixed.
  • Enterprise Edition: In Linux builds, the pre-check for the upgrade failed if the root user directory had less than 5GB of space, as the disk free space was calculated for the root user directory instead of the Opmanager installed directory. This issue has now been fixed.
  • Enterprise Edition: Previously, the PPM download was not initiated again in smart upgrade if the previous attempt had failed due to network interruption on their end. This issue has now been fixed.
  • Enterprise Edition: Previously, the PPM download was not initiated, after freeing up disk space and restarting the probe. This issue has now been fixed.
  • Enterprise Edition: Previously, when the probe was restarted after uploading the PPM, the PPM got deleted if the certificate was not downloaded already. This issue has now been fixed.
  • OpManager MSP: When the test action is being performed from OpManager MSP central, the operation has to wait until the actual script timeout time.

Build No 128103 - May 31, 2024

  • General: Previously, CSRF vulnerability (ZVE-2024-1132) was detected where the external users were able to utilize the network tools without authentication to perform ping or SNMP ping on network devices. This has now been fixed. (Reported by Jayateertha Guruprasad).
  • General: Previously from version 12.7.243, when configuring old model failover for the central server, the primary central server started without any issues. But, the secondary central server encountered a "file not found" exception. This issue has been fixed now.
  • OpManager: During certain instances, duplicate schedules were being added for VMware event listener. This issue has been fixed now.
  • OpManager: VMware parent device inventory update won't be triggered now for the following events: 'DrsVmMigratedEvent', 'VmMigratedEvent' and 'VmRelocatedEvent'.
  • OpManager: Previously, during VMware discovery/rediscovery, there were issues causing high resource consumption in the vCenter environment due to multiple container views created. This has been optimized and fixed now.
  • OpManager: Previously, in some instances, the "There is some problem with database tables." popup message was being displayed when duplicate tables were created for hardware data collection. This issue has been fixed now.
  • OpManager: The associated notification profiles were not being displayed while editing the URL monitors from Settings -> Monitoring -> URL Monitors. This has been fixed now.
  • OpManager: Previously, there were issue in applying the device template from Central to the devices if there is space in the selected probe name. This has been fixed now.
  • OpManager: Previously, there were overlapping issues with tooltip that appear upon hovering on the shortcut icon in a Business view widget. This has been fixed now.
  • OpManager: Previously from version 125415, When the "Notification Profiles Applied by Device" report under Reports -> Inventory tab was exported, there was some mismatch in the data. This has been fixed.
  • OpManager EE: Previously, There were some discrepancies the showing Probe status & Probe drop down. This has been fixed now.
  • OpManager EE: Earlier, users could not create groups or business views in Central with the same names as those in Probe. This issue has been fixed now.
  • OpUtils: Previously, users faced an issue during router scanning. This has now been fixed.
  • OpUtils: Previously, under Switch Port Mapper, users faced an issue with deleting switches due to discrepancies in the LHS tree data. This has now been fixed.
  • OpUtils: Previously, there was a data overload from the probe to the central while scanning the subnets. This issue has now been fixed.

Build No 128102 - April 23, 2024

  • General: Previously, from version 127257 and above, the product failed to restart automatically when MicrosoftSQL database connection re-established after a failure. This issue has been fixed now.
  • General: For improved security, access limitation has been enhanced in Mobile app specific endpoint.
  • General: Previously, an Administrator user with complete access was able to enable/disable the RestAPI access status of a Super Admin user. This issue has now been fixed. (Reported by Jayateertha Guruprasad)
  • General: For improved security, access limitation has been enhanced in User Management specific endpoints.
  • General: After migrating to JRE 1.8.0_362, from version 12.7 and above there were issues with response data compression, if SSL was enabled. This has been fixed now.
  • OpManager: Previously, in OpManager Central, users faced an issue with selecting a port from the switch snapshot while having "All probe" enabled. This has been fixed.
  • OpManager: Previously, in OpManager Central, on the switch snapshot page under Port View, the export function for switch port data was non-functional when all probes were selected. This issue has been fixed.
  • OpManager: Previously, for upgrade cases, the applications manager plugin was disabled under the user management page, when the unified console view in OpManager Central was also disabled. This issue has been fixed now.
  • OpManager: The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on May 26, 2024.
  • OpManager: Previously, during certain instances, for OpManager versions 127313 and above, whenever new connections were made to VMware vCenter or ESX, there was an increase in memory consumption, leading to OOM (out of memory). This issue has been fixed now.
  • OpManager: Previously, during certain instances, VMware Discovery failed due to improper parsing of the end device response. This issue has been fixed now.
  • OpManager: OAuth-related functionalities were not working properly in NFADE and FWADE central servers. This issue has now been fixed.
  • OpManager: Previously, if devices were double-encrypted with SNMP community encryption, there were problems in device actions. This issue has been fixed now.
  • OpManager: Previously, during certain instances for agent-monitored devices, the CPU utilization monitor's data was not being stored when it's alternate OID 'CPU Utilization ProcessorInformation' was being used on threshold-enabled cases. This issue has been fixed now.
  • OpManager: Previously, while creating custom monitors, if users choose a functional expression, even if decimal data type was selected, only the integer part of the decimal data type was being considered. This issue has been fixed now.
  • Enterprise Edition: A discrepancy in status led to the display of an incorrect banner message on the smart upgrade page if the manual upgrade was done after initiating the new smart upgrade. This issue has now been fixed.
  • Enterprise Edition: In Linux builds, the pre-check for the upgrade failed if the root user directory had less than 5GB of space, as the disk free space was calculated for the root user directory instead of the Opmanager installed directory. This issue has now been fixed.
  • Enterprise Edition: Previously, the PPM download was not initiated again in smart upgrade if the previous attempt had failed due to network interruption on their end. This issue has now been fixed.
  • Enterprise Edition: Previously, the PPM download was not initiated, after freeing up disk space and restarting the probe. This issue has now been fixed.
  • Enterprise Edition: Previously, when the probe was restarted after uploading the PPM, the PPM got deleted if the certificate was not downloaded already. This issue has now been fixed.
  • Enterprise Edition: Previously, users could not update the Central's hostname on the probe's central details page, if the existing hostname did not resolve via DNS. This issue has been fixed now.
  • Enterprise Edition: On the new SUM page, the status showed 'Download in progress 100%' instead of 'Download is complete. Ready to update' in some cases even though the PPM file was fully downloaded. This issue has been fixed now.
  • Storage Monitoring: A false alert was repeatedly raised about failed credential test for storage devices. This issue has now been fixed.
  • OpUtils: Previously, users faced an issue while creating a new node on the IP Address Manager or Switch Port Mapper Tree View. This issue has now been fixed.
  • OpUtils: Previously, there was an issue where the group names list did not appear when updating users in OpManager User Management. This issue has now been fixed.
  • OpUtils: Previously, there was a slowdown issue caused by an increase in thread count when scanning subnets too frequently or in bulk. This has now been fixed.
  • OpUtils: Previously, there was an issue with the probe name being displayed on OpManager's central dashboard. This issue has been fixed now.
  • OpUtils: Previously, under IP Address Manager and Switch Port Mapper modules, there was an alignment issue with the Alerts tables. This has now been fixed.

Build No 128100 - January 17, 2024

  • General: JRE has been migrated to version 1.8.0_362 for the Enterprise editions during the upgrade.
  • General: Previously, while accessing NOC views and Widgets with embedded links, if the total Auth Key generated entries were more than 50, an Incorrect Authentication error occurred. This issue has now been fixed.
  • General: Introduced UK and CA data center support for OpManager - SDP Cloud integration.
  • General: The log a ticket description size has now been increased from 500 to 2000.
  • General: Previously, there was a delay in the user interface, when the user icon on the top right corner was clicked. This issue has been fixed now.
  • General: json jar has been upgraded to version 20231013.
  • General: A Content Security Policy has been implemented to enhance security.
  • General: Apache Tomcat has been updated to enhance security.
  • General: Previously, an XSS issue was found on certain pages while rendering the rebranded product name. This issue has now been resolved.
  • General: Previously, from version 126322 and above, there was an issue while updating Custom roles, where permission changes were not reflected for the users. This issue has now been fixed.
  • General: The patch integrity verification certificate has been updated. It is mandatory to import the new certificate during the upgrade process.
  • General: From this version, the patch integrity verification certificates will be synchronised automatically, when the certificate server is accessible while the product is running.
  • General: Previously, in the MIB browser, uploading a new MIB file allowed it to be stored anywhere. Now, path sanitization has been implemented to ensure a new MIB is stored exclusively under the "OpManager/mibs" directory.
  • General: Previously, in certain cases, webhook notification profiles failed to trigger due to some issue in the certificates trusting process. This issue has been fixed now.
  • General: Accessing the RestAPI via the Api key in the request parameter, is currently being deprecated and will be removed in a future release. Users with existing integrations using apiKey in the request parameter are advised to migrate the apiKey in the request headers to avoid any future impact.
  • OpManager: ManageEngine EventLog Analyzer integration - Users can now integrate OpManager with EventLog Analyzer to forward and analyze their critical logs to identify potential threats and gain deeper insights into user behaviour.
  • OpManager: The XSS vulnerabilities identified in the ping action executed from the Device Snapshot, device Inventory list, Alarms and the Add Device pages, have been fixed now.
  • OpManager: Introduced EventLog monitoring support for agent-based monitoring devices.
  • OpManager: The SparkGateway package has now been updated to its latest version 6.2.0 (build 1044).
  • OpManager: Introduced a new feature called "Custom Integrations" that allows users to integrate OpManager with their desired third-party applications, via webhooks and REST APIs.
  • OpManager: Enhanced the search option in the virtualization discovery, that allows users to bulk select VMs for discovery, provided they match the search criteria.
  • OpManager: Previously, users were not able to add the monitor name fields as notification variables for non-performance monitors. This issue has been fixed now.
  • OpManager: Previously, during VMware discovery or manual inventory updates, certain clusters were not being listed down under the VMs listing page. This issue has been fixed now.
  • OpManager: Introduced 8 new CLI monitors for IBM-AIX and Solaris device types respectively.
  • OpManager: Introduced System Reboot time CLI monitor for IBM AIX, HP-UX, Mac OS and Linux FreeBSD device types.
  • OpManager: Introduced an option that allows users to map string characters to integer values and vice versa, for the display values of performance monitors in alarms and graphs page.
  • OpManager: Previously, the 'Group' and 'Business View' filters wouldn't take effect in the Device Summary and Infrastructure Summary widgets. This issue has been fixed now.
  • OpManager: Henceforth, on the device snapshot page, a new column has been added under the Interfaces tab to list the IP addresses of the corresponding interfaces.
  • OpManager: The pagination in the Inventory page would not work if sorted by a column with null values. This issue has now been fixed.
  • OpManager: Push notifications to the mobile application experienced intermittent failures. This has been fixed now.
  • OpManager: In Alarm Snapshot page, the event grid options were inaccessible. This has been fixed now.
  • OpManager: A new inbound firewall rule will be automatically incorporated into the server when trap processing is enabled.
  • OpManager: PerfGroup Filter is now available in Trend Reports. Custom Trend Reports can be created by choosing any PerfGroup.
  • OpManager: Previously, Interface Properties and CustomFields for Interfaces variables were not replaced in Notification profiles for Interface bandwidth alarms. This has been fixed now.
  • OpManager: Henceforth, while initiating network discovery using CSV import, users will be able to associate Custom Field values in the CSV file to the default Custom Fields of OpManager.
  • OpManager: In OpManager - ServiceDesk Plus OP integration, for the requester field, the display name will now be populated instead of the login name.
  • OpManager: Previously, an internal server error would occur when UPS type devices were rediscovered. This issue has been fixed now.
  • OpManager: Users can now view, export and schedule the Availability Dashboard Report as a pie chart as well.
  • OpManager: Previously, the AMap configuration page would be shown instead of the Zoho Map because of an internal issue. This has now been fixed.
  • OpManager: While expanding the widgets in a Group snapshot page, the 'Summary' widget showing the availability distribution chart, would overlap with the expanded widgets. This issue has now been fixed.
  • OpManager: While importing devices from the Layer2 Map for discovery, there was no pagination to scroll through all the devices. This issue has now been fixed.
  • OpManager: Previously, when a user is updating the display name of a device that existed in more than one business view, the display name is updated as the device label. This issue has been fixed now.
  • OpManager: Users can now generate reports using the Report Builder in the inventory by selecting devices/interfaces across multiple pages (using pagination).
  • OpManager: Previously, when a group was created using custom field criteria with conditions 'Not Equals' or 'Not contains', the devices/interfaces that had no values for the corresponding custom fields were not added to the group. This issue has now been fixed.
  • OpManager: In hardware monitoring, irrelevant error messages will now not be raised when normal Cisco devices are in nonFunctioning(6) status, or when Cisco ASR, ISR, ASA, NCS and Nexus devices are in unavailable(2) status.
  • OpManager: Henceforth, users will be able to add devices manually to the 'Ignored Devices' list under Network Discovery page.
  • OpManager: For VMware monitoring, migrated to VMware vSphere management SDK jar, from the previously used vijava, a third-party jar, to ensure better efficiency.
  • OpManager: A new "UnManage the Orphaned VMs" option has been introduced in the VMware Update Inventory window, to unmanage the orphaned VMs.
  • OpManager: Previously, for process monitors, when the threshold condition was equal to zero, users were not able to set the rearm values. This issue has been fixed now.
  • OpManager: The MSSQL instances, that are found under the MSSQL tab of the device snapshot page, will now be listed from the MSSQL devices and OpManager database.
  • OpManager: Previously, for EventLog monitors, OpManager will check if the device is a localhost running using DNS. If the DNS was not resolved, then no events were raised for the affected device. This issue has been fixed now.
  • OpManager: Previously, the "Last polled values of a performance monitor" widget, was not displaying data for string monitors, when the "All devices" option was chosen. This issue has been fixed now.
  • OpManager: Previously, users were not able to declare string threshold values for string performance monitors, since integer validation was carried out. This issue has been fixed now.
  • OpManager: Previously, in the data collection manager, when BulkSave was enabled, the interface data collection was not resumed. This issue has been fixed now.
  • OpManager: Henceforth, the Heatmap widget on the dashboard will show data in the donut view by default. However, users can update the widget to display either the donut or the radial bar chart.
  • OpManager: On installing an agent, agent-based monitoring will now be initiated automatically for agentless monitored devices.
  • OpManager: Earlier, there was an issue with redirection to the Network Configuration Manager device snapshot screen when clicking the snapshot link from the alarms page. This issue has been fixed now.
  • Enterprise Edition: Henceforth, in Central, the 'Down Since' column will be shown in the Currently Down widgets.
  • Enterprise Edition: Users can now view the Probe name on Google/Zoho map in the Central, by enabling the 'Show Label' option.
  • NetFlow: IPv4 and IPv6 filter options have been provided for the LAN-WAN Reports and the Traffic, Application, QoS, TCP Flags, Next Hop, AS View tabs in the Forensics report.
  • NetFlow: Support ID: 8650504 - The option to export scheduled Compare report as CSV reports has been made available.
  • NetFlow: An option to group Conversations by Source AS & Destination AS has been introduced in the Interface snapshot.
  • NetFlow: Support ID: 8642973 - Management IP was previously allowed to be mapped to multiple device. It has been fixed now and cannot be mapped to more than one device.
  • NetFlow: Support ID: 8755777, 8727647, 8833683, 8878806 - Introduced the option to select user-defined devices for Top N Interfaces, IP Group, and Interface Group widgets by Speed/Utilization.
  • NetFlow: Support ID: 9201390 - The issue in updating Geolocation data(CountryCode table) in the MSSQL DB has been fixed.
  • NetFlow: Support ID: 9161247 - Users were unable to get Timestamp details while exporting the Inventory Violation report in the GUI and CSV reports. This issue has now been fixed.
  • NCM: Now, unmanaged devices in Network Configuration Manager will be listed under the "Unmanaged Devices" tab in Inventory.
  • NCM: Now, Network Configuration Manager is enabled by default in OpManager as well as its related products such as OpManager EE, OpManager MSP, and OpManager RMM.
  • NCM: Now, the backup failure alarm for devices will only be triggered if the devices have been successfully backed up at least once.
  • NCM: Now, for REST credentials, the Save And Test option is available.
  • NCM: Now, by default, Network Configuration Manager supports Calix Switch, Comnet Switch, and Vubiq Ethernet Switch.
  • NCM: Earlier, when the 'Execute Now' action was clicked for a completed schedule operation, there was no message displayed, even though it would not be executed in the backend. Now, a message will be displayed, informing the user that it cannot be executed.
  • NCM: Now, the Maverick package has been updated to version 1.7.56 in response to CVE-2023-48795.
  • NCM: Now, support for CIS compliance standards has been incorporated for Cisco IOS and Cisco ASA devices.
  • Firewall: NAT Rules support for Palo Alto, FortiGate and SonicWall devices.
  • Firewall: Informative pages related to Firewall Analyzer's add-on trial is now displayed in the OpM, OpM Plus and OpM-EE 'Firewall Log Analysis' modules.
  • Firewall: Support ID: 8188533, 8346926, 8205452, 7944452, 9156474 - Palo Alto device managed by Panorama cases, pushed and shared configuration based rule management report data population changes included.
  • Firewall: Support ID: 9172945 - Check Point REST API access code has been updated to handle timeout cases.
  • Firewall: Support ID: 8580609 - For MikroTik devices, SNMP status in Security Audit report and rule parsing is done.
  • Firewall: Support ID: 9156474 - Watch Guard Policy Optimization report issue is fixed.
  • Firewall: Support ID: 9203532 - Issue in Cisco Router Rule parsing is fixed.
  • Firewall: Support ID: 9225764 - Issue in FirePower Rule parsing is fixed.
  • Firewall: Support ID: 9227849 - SonicWall API based device rule action not working issue fixed.
  • Firewall: Support ID: 9294725 - Cisco Router schedule configuration fetch not working issue fixed.
  • Firewall: Support ID: 9164723 - On demand PDF export and mail generated file in Linux machine is larger in size. This issue is fixed.
  • Firewall: Support ID: 8824909 - The XLS report exported on the Object Usage page is not similar to the PDF report exported. This issue is fixed.
  • Firewall: Support ID: 9156046 - Unable to open a report downloaded from the 'Last Generated Report' on the Custom Report page.
  • Firewall: Support ID: 9164641 - Unable to export an XLS report on the Expiry Notification page, and a span tag is shown in the CSV file exported. This issue is fixed.
  • Firewall: Support ID: 9164876 - Unable to export an XLS report on the Object Usage page, and Japanese translation was missing in the exported CSV file. This issue is fixed.
  • Firewall: Support ID: 9165331 - The colors of the Risk Level do not match with the colors used in the chart on the Risk Analysis page. This issue is fixed.
  • OpUtils: Previously, under the Switch Port Mapper module, users faced an issue with fetching VLAN details from Extreme Switch. This issue has now been fixed.
  • OpUtils: Previously, under the Switch Port Mapper module, users faced an issue with the switch scan when changing the SNMP version from SNMP version 1 to SNMP version 2. This issue has now been fixed.
  • OpUtils: Previously, MAC address of IPs associated with multiple network/subnet addresses were duplicated in email alerts. This issues has now been fixed.
  • OpUtils: Previously, under the IP Address Manager and Switch Port Mapper module, users were able to view only the details of the selected probes. It has now been enhanced by introducing an "All probes" option that displays a comprehensive list of details of all the probes.
  • OpUtils: The central IP Address Manager and Switch Port Mapper module has recently incorporated detailed reporting features.
  • OpUtils: Previously, in OpManager's switch snapshot page, there was an issue with the export function for switch ports. This issue has now been fixed.
  • OpUtils: Previously, when there was a mismatch in switch names between OpManager and Switch Port Mapper, the switch ports will not be displayed in the OpManager switch snapshot. This issue has now been fixed.
  • OpUtils: Previously, there was an issue with storing SNMP OID (Object Identifier) longer than 50 characters in the database during switch scanning. Now, the limit for storing SNMP OID in the database has been increased to 150 characters.
  • OpUtils: Previously, under IP Address Manager module, users faced an issue with fetching DHCP scope details for Fortinet DHCP servers. This issue is now fixed.
  • OpUtils: Email alert notifications from Switch Port Mapper will now include Sys Name of switches.
  • OpUtils: Previously, under the Settings tab in IP Address Manager and Switch Port Mapper module, there was an issue with creating a new custom column with an existing column name. This issue has been fixed now.
  • OpUtils: Previously, users faced an issue with the "All Unmanaged Ports" and "All Managed Ports" filter option within the Switch Port Mapper module's all switches' Ports tab. This issue has now been fixed.
  • OpUtils: Default sorting based on generated time for History and Alerts under the IP Address Manager and Switch Port Mapper module has been enabled.
  • OpUtils: Under the Rogue Detection module, default sorting for "Discovered At" and "Valid Till" has been enabled.
  • OpUtils: Default sorting of IP addresses in the IP list view under IP Address Manager and ifIndex in port view under Switch Port Mapper has been enabled.
  • OpUtils: Previously, under the Switch Port Mapper module, there was an issue with displaying the connected device information in the consolidated view of trunk port details. This issue has now been fixed.
  • OpUtils: Previously, searching for an IP or MAC address using the global search option did not display the left tree view and the corresponding subnet path. This issue has now been fixed.
  • OpUtils: Previously, under the Alarms tab in OpUtils, there were limitations in sorting and searching within the alarms table. This has now been enhanced.
  • OpUtils: Previously, in OpManager Central, when navigated to tree groups within the IP Address Management under the Network tab, the option to export reports was not functioning. This issue has been fixed.
  • OpUtils: Previously, within the IP Address Management, the header list when exporting reports, displayed "active-directory-name." It has now been updated to show "AD DOMAIN."
  • OpUtils: Previously, within the IP Address Manager and Switch Port Mapper module, when accessing the export through the group name/subnet/switch, the exported report will not include the group name/IP address/switch IP in its file name. This has now been fixed.
  • OpUtils: Under OpUtils reports, the "Connected IP details" report exports null values as "-" instead of empty spaces and it is sorted based on port number.
  • OpUtils: Previously, there was a discrepancy in the leased and reserved counts for Palo Alto DHCP server scopes under IP Address Manager. This issue has been resolved.
  • OpUtils: Previously, in the Network Monitoring tab under Networking Tools, there was an issue with deleting devices. Now this has been fixed.
  • OpUtils: Previously, within the IP Address Manager module, tree groups would duplicate when editing an approved subnet promptly.
  • OpUtils: Previously, under the IP Address Manager module, changes made to subnet details, such as subnet name and description, are not reflected in the subnet details after subnet approval.
  • OpUtils: SSH settings has been enabled under the OpUtils General Settings within the Settings menu.

Build No 128004 - May 06, 2026

  • NetFlow: Previously, upgrades failed in certain cases when scheduled folder names contained trailing spaces. This issue has now been fixed.

Build No 128003 - August 30, 2024

  • Enterprise Edition: Previously the Probe upgrade would fail if the Probe's trayicon was not available. This issue has now been fixed.
  • NetFlow: Previously, upgrade failed in some cases due to an issue in renaming schedule folders. This has been fixed now

Build No 128002 - April 04, 2024

  • General: After migrating to JRE 1.8.0_362, from version 12.7 and above there were issues with response data compression, if SSL was enabled. This has been fixed now.
  • General: For improved security, access limitation has been enhanced in Mobile app specific endpoint.
  • General: Previously, an Administrator user with complete access was able to enable/disable the RestAPI access status of a Super Admin user. This issue has now been fixed. (Reported by Jayateertha Guruprasad)
  • General: For improved security, access limitation has been enhanced in User Management specific endpoints.
  • General: Previously, from version 127257 and above, the product failed to restart automatically when MicrosoftSQL database connection re-established after a failure. This issue has been fixed now.
  • General: Previously, the Custom HTML widget failed to load its embedded URL in the NOC view, when the user has APM module permission. This issue has now been fixed.
  • General: Previously, in the Old model failover, there was a scenario where both primary and secondary services remained up and running when started simultaneously. This issue has now been resolved.
  • General: In Virtual IP based failover, an issue was identified where one of the services would face a startup problem if both primary and secondary services were started simultaneously. This has been fixed now.
  • OpManager: OAuth-related functionalities were not working properly in NFADE and FWADE central servers. This issue has now been fixed.
  • OpManager: Previously, when SDP was configured with a very older version of OpManager, there was an issue when users tried to log in, after OpManager was upgraded. This issue has been fixed now.
  • OpManager: Previously, for upgrade cases, the applications manager plugin was disabled under the user management page, when the unified console view in OpManager Central was also disabled. This issue has been fixed now.
  • Enterprise Edition: A discrepancy in status led to the display of an incorrect banner message on the smart upgrade page if the manual upgrade was done after initiating the new smart upgrade. This issue has now been fixed.
  • Enterprise Edition: In Linux builds, the pre-check for the upgrade failed if the root user directory had less than 5GB of space, as the disk free space was calculated for the root user directory instead of the OpManager installed directory. This issue has now been fixed.
  • Enterprise Edition: Previously, the PPM download was not initiated again in smart upgrade if the previous attempt had failed due to network interruption on their end. This issue has now been fixed.
  • Enterprise Edition: Previously, the PPM download was not initiated, after freeing up disk space and restarting the probe. This issue has now been fixed.
  • Enterprise Edition: Previously, when the probe was restarted after uploading the PPM, the PPM got deleted if the certificate was not downloaded already. This issue has now been fixed.

Build No 128001 - March 29, 2024

  • General: Earlier, upgrade failures occurred due to a data sync issue in the Config Management module of Enterprise Edition. This issue has been fixed now.

Build No 127261 - December 22, 2023

  • General: Now, the Maverick package has been updated to version 1.7.56 in response to CVE-2023-48795.

Build No 127260 - December 11, 2023

  • General: Previously, path traversal vulnerability(CVE-2023-47211) was detected for MIB browser. This issue has now been fixed by implementing path sanitization, ensuring a new MIB is stored exclusively under the "OpManager/mibs" directory.

Build No 127258 - October 31, 2023

  • OpManager: Previously, under Settings, in the OpUtils' Discovery tab, users faced an issue with the Active Directory tab being visible for Linux probes. This has now been fixed.
  • OpManager: Previously, there was an upgrade failure due to Network Configuration Manager device data sync issue. This issue has been fixed now.
  • OpManager: From version 127133 onwards, users were unable to disable the IP SLA Monitor due to an internal issue. This issue has been fixed now.

Build No 127257 - October 20, 2023

  • General: If the product was installed in Linux devices with non-english OS, attempting to download System Info under the System Performance page resulted in a download failure. This issue has now been fixed.
  • General: In TFA and SSL recommendation screens shown upon Super admin user login, a prominent "Skip" button and a new "Don't show again" option in UI has been introduced.
  • General: For better user experience, change password recommendation flow has been improved for the Super Admin user, in all ITOM Products.
  • General: Previously, if the default Authentication mode was modified under System settings, users who have already logged in with "Keep Me signed in" option enabled, faced login failure while accessing OpManager server. This issue has been fixed now.
  • General: When a global search was performed, sometimes the submenu failed to load. This issue has been fixed.
  • General: Previously, due to an uncleared cookie, there was an URL redirection issue while accessing server URL in a new browser window. This issue has been fixed now.
  • General: Previously, when SMS Gateway URL was configured with an IP, and if the same IP had been configued in Proxy settings under "No Proxy for", the SMS server posting to the url, was still using the proxy settings. This issue has now been solved.
  • General: A new option to configure System type has been introduced in SMPP Settings page.
  • General: Previously, if a monitor name contained special characters, there were issues in scheduling those monitors. This issue has been fixed now.
  • OpManager: Introduced Default reports in the Advanced Reports section, providing a summary of devices, credentials, monitors, and notifications after onboarding.
  • OpManager: Previously, in some cases, CLI monitor data collection failure was not being captured in Data Collection Manager. This issue has been fixed now.
  • OpManager: From version 127243 onwards, the 'Apply Interface Template' page would go blank due to an internal issue. This has been fixed now.
  • OpManager: Users can now change the category of a 'Wireless Access Point' device if the Access point is not mapped to any template of Wireless LAN Controller.
  • OpManager: Users can now choose either the device availability or health status severity based data in a 'HeatMap' widget.
  • OpManager: Previously, the devices plotted in the Zoho Maps were moved to different coordinates due to an internal issue. This has been fixed now.
  • OpManager: Previously, there were issues in fetching the Meraki Switch port when discovering a Meraki Device. This has been fixed now.
  • OpManager: Previously, when the 'Do Not Add' action was configured in the re-discovery rule, the existing devices would be skipped from the discovery. This issue has been fixed now.
  • OpManager: Due to an internal issue, a Layer2 Map would only show partial device mapping during rediscovery. This issue has now been fixed.
  • OpManager: From version 127133, slowness was observed in the Interface list view page when a filter was chosen. This issue has been fixed now.
  • OpManager Storage Monitoring : Previously, a disk license issue occurred when a storage device was unmanaged in the MSSQL Db setup, as the disk was not unmanaged properly. This issue has now been fixed.
  • OpManager: There was an issue in displaying the time in the integrated report's UI. This issue has been fixed now.
  • OpManager: From now, Advanced reports and Integrated reports list will be sorted by using the report name.
  • OpManager: Previously, in Scheduled pdf report some fields were empty. This issue has been fixed now.
  • OpManager: From now, Start time and End time will be displayed while exporting and scheduling time based Default and Advanced reports.
  • OpManager: There was an intermittent slowness while generating advanced report for interfaces. This issue has now been fixed.
  • OpManager: In advanced reports, two new filter types "Is Empty" and "Is Not Empty" were introduced.
  • OpManager: Previously, when scheduling a report for multiple node monitor graphs like partition details, free disk space, used disk space, etc, a report for a random node was generated instead of the user specified nodes. This issue has been fixed.
  • OpManager: Filters have been introduced for Availability fields in Advanced Reports.
  • OpManager: Three new modules -Credentials, Notification Profiles, and Monitors have been introduced in advanced reports.
  • OpManager: From now, Operator users with all devices access, can perform write actions in advanced reports.
  • OpManager: From now, Custom role users with write reports permission and access to all devices can perform write actions in advanced reports.
  • OpManager: From now, Custom role users with read reports permission and access to all devices can perform read actions in advanced reports.
  • OpManager: The issues pertaining to Third party integrations' notification profile reports and notification profile test action, have been fixed now.
  • OpManager: New widgets for 'Printer Status' and 'Cartridge Info' have now been added to the Printer Snapshot page.
  • OpManager: Introduced CLI monitoring support for Linux FreeBSD & Mac OS devices with default monitors.
  • OpManager: Under Reports -> Advanced report, introduced a new column called 'is Agent-Monitored Device' to filter out agent-monitored devices.
  • OpManager: Previously, under the inventory and servers related subtabs, agent-monitored devices were not being listed out, when WMI protocol filter was selected. This issue has been fixed now.
  • OpManager: Previously, when associating an Idle Agent to the corresponding device, the error message was not displayed properly with the troubleshooting page link, if the agent was in a non-communicable state. This issue has been fixed now.
  • OpManager: Previously, there were certain issues while converting a 'Log File Agent' into a 'Monitoring Agent' using the 'convert to Monitoring Agent' operation. This Issue has been fixed now.
  • OpManager: Previously, if the DNS name of the HyperV server was not reachable from OpManager-installed server, the VMs were not listed during the HyperV discovery or rediscovery. This issue has been fixed now by carrying out the HyperV discovery using the property given in the "Poll Using" field of the "Device Summary" section.
  • OpManager: VMware physical NIC and HBA alerts will now have their respective ESXname in the alert message.
  • OpManager: Previously, in certain instances, the rediscovery schedule was skipped, even when the VMware & Nutanix parent devices were out of the downtime and unmanaged state schedule. This issue has been fixed now.
  • OpManager: Previously, virtual monitors were not associated to virtual servers, that were discovered with CLI credentials. This issue has been fixed now.
  • OpManager: Previously, in VMware hardware monitoring, some unconfigured sensors were being added to the device, which raised unnecessary alerts while polling. This issue has been fixed now by preventing the sensors from being added to the device.
  • OpManager: Previously, data models were not deleted, even when the Adaptive Thresholds feature was reverted by disabling the checkbox found under Settings -> Monitoring -> Monitor Settings -> Adaptive Thresholds. This has been fixed now.
  • OpManager: For HyperV discovery, encoding has now been added during the xml parsing, for fetching few VM properties.
  • OpManager: In the graphs page, a new option has been introduced, that allows the users to see the Average/Min/Max values, when the aggregated data is viewed.
  • OpManager: Previously, there were issue while updating the Layer 2 Map name with two byte characters. This has been fixed now.
  • OpManager: Previously, in case of silent installation of the APM Plugin, OpManager had to be restarted manually, to start monitoring. This has now been automated by starting APM Plugin without restarting OpManager.
  • OpManager Enterprise: From version 126322, in the central server there was an issue while generating CSR under Security settings -> SSL configuration. This issue has been fixed now.
  • OpManager Enterprise: Previously, after upgrading to version 126322 or above, user management data failed to sync from Central to Probe server, if the Probe server had been installed from version 11600 or below. This issue has been fixed now.
  • OpManager Enterprise: Previously, users were unable to access the Meraki device snapshot page from Meraki Controller snapshot > All devices page in the Central. This issue has been fixed now.
  • OpManager Enterprise: Previously, due to the switch to daylight savings time, the daily average collected data for hardware monitors from OpManager Probe was not syncing properly with OpManager Central, and unprocessed data files were being created in the OpManager Central. This issue has been fixed now.
  • OpManager MSP: Previously, the Interface discovery page wasn't visible when a Probe is choosen in MSP Central. This issue has been fixed now.
  • OpManager MSP: From version 127133 onwards, the create group option was displayed in the Probe due to an internal issue. This has been fixed, since groups can be created only on the Central server.
  • OpManager MSP: In MSP Central, Introduced a customer-specific All probes option, under Servers -> Monitoring Agents page.
  • OpManager Storage Monitoring: Previously, there was an issue while discovering HP EML/ESL TapeLibrary. This issue has now been fixed.
  • OpManager Storage Monitoring: Previously, storage reports showed a maximum of 10 rows. This issue has been fixed now.
  • OpManager Storage Monitoring: EMC Unity Storage- FileSystem Utilization, Storagepool Utilization, RAID MEMORYUSAGE & PureStorage(API)- Volume Utilization, VolumeGroup Utilization monitors provided incorrect values. This issue has been fixed.
  • OpManager Storage Monitoring: Previously, there was an issue in EMC VNX File storage device discovery. This issue has now been fixed.
  • OpManager Storage Monitoring: Previously, Tapelibrary snapshot page was not loading properly. This issue has been fixed now.
  • Firewall: SupportID - 9225764, 8857354 - Issue while adding DeviceRule due to banner prompt and banner input has been fixed.
  • Enterprise Edition: Firewall EE summary dashboard is now available in OPM EE Lite Central Edition and OPMPLUS Enterprise Edition.

Build No 127256 - October 13, 2023

  • OpManager: Previously, for Cisco devices, even if the sensor name returned NULL response from the device, they were still being added under the Device snapshot page. This issue has been fixed now.
  • OpManager: Previously, for some Cisco devices, the sensor names contained the status of that sensor. Now, the sensor status has been removed from its name.
  • OpManager: Previously, users experienced upgrade failures, due to case insensitive WMI classname in "WMIClass" table.This issue has been fixed now.
  • OpManager: For Agent-monitored devices, Inventory Asset details will now be updated based on the properties enabled under the "Properties to update on device re-discovery" option found under the "Discovery Settings" page.
  • OpManager: Previously, on adding agent-based desktop category devices, the RAM and hard disk details were not being updated in the device summary. This issue has been fixed now.
  • OpManager: Previously when there were multiple IP addresses for a device, there were issues with agent-based discovery. This issue has been fixed now.
  • OpManager: Introduced 3 new Performance monitors , Load Average (CLI), Load Average per Processor (CLI) and System Up Time in days (WMI).
  • OpManager: Monitor-specific 'Data Collection Error Logs' can now be seen on the graph page of the corresponding performance monitor.
  • OpManager: A new option to suppress Interface specific alarms has been introduced.
  • OpManager: For the forecast trend graph feature, introduced an option that allows users to configure the historical data to be used (in days) from the Graph display settings.
  • OpManager: If the forecast option was selected from the device snapshot page, the resulting graph will now be displayed in aerial mode instead of linear.
  • OpManager: The interface forecast graph UI has been enhanced by starting the scale for error and discard interface graphs from zero, and capping the forecasted Tx and Rx utilization graphs at 100.
  • OpManager: Previously, the initial sync between OpManager and Applications manager plugin failed, due to the slowness of the user sync process. This has been fixed now.
  • OpManager: Previously, while updating the hard disk size, if there was any mismatch in the number of instances between the OIDs, incorrect values were displayed. This issue has been fixed now.
  • OpManager: While adding IPMI credentials, the default port value will now be displayed.
  • OpManager: Fixed the alignment issues faced, when Nutanix and Xen Maps were chosen under the Maps page.
  • OpManager: Henceforth, the device search option will be available by default in the 'Add monitor' page, if the page was accessed either from the Device Template or Settings > Performance monitors.

Build No 127255 - October 06, 2023

  • OpManager: Previously, there were issue in listing Groups under Inventory page in the Central Server. This has been fixed now.
  • OpManager: For MSSQL users, there was a problem with displaying notes in the "All Alerts with Notes" section under System reports. This issue was identified in OpManager versions starting from 126115, and it has since been resolved.
  • OpManager: A new filter for the event type has been introduced in All alarms and Recent alarms widgets.
  • OpManager: Two byte characters are supported in the Subject and Message fields, while configuring alarm escalation rules.
  • OpManager: In the column chooser under Alarms page, a new option has been introduced, to list the custom fields associated with the source device of the alarm.
  • OpManager: If push notifications were enabled for Android devices, there was a delay in startup. This has been fixed now.
  • OpManager: Users can now update Custom Field values in bulk, either from Inventory or from Quick Configuration Wizard.
  • Enterprise Edition : Previously, there was a startup failure in a freshly installed probe, if OAuth had been configured in the Central server for Mail Server Settings. This issue is applicable for the EE customers upgraded to version 126322 or above.
  • Enterprise Edition : Previously, from version 126329 and above, if proxy was enabled in the central server, the device snapshot page could not be opened. This issue has now been fixed.
  • Enterprise Edition : Previously, on Central's smart upgrade page, the "last update time" indicated when probe was last updated exclusively through enhanced smart upgrade. Now, the "last update time" will be visible for all upgrades.
  • Enterprise Edition : Previously, from version 126329 and above, if the "Make API requests via the Central server" option was disabled in the Central, the device snapshot page failed to load. This issue has now been fixed.
  • Enterprise Edition : If the probe server had been upgraded to any versions between 12.5.213 and 12.5.309, the tray icon name was not updated with probe name. This issue has now been fixed.
  • NetFlow: In NFA Alarms, issue in drilldown traffic report has been fixed now.

Build No 127243 - September 27, 2023

  • General: A few issue fixes in Smart Upgrade flow have been integrated.
  • General: The dashboard widget layout now allows a more flexible resizing of widgets, for an enhanced user experience.
  • General: To enhance security for Linux installations, User permission for the product folders has been modified and can be accessed only by the installed user. (Reported by Tenable. Refer : CVE-2023-6105)
  • General: In certain pages, when the Tab key was used for field navigation, the UI broke due to slide collision. This issue has now been fixed.
  • General: Previously, an error occurred when refreshing specific dashboard pages, or while navigating between dashboards in products other than OpManager. This issue has been fixed now.
  • General: In a fresh installation, when redirected from the web-client page that shows startup progress, the default admin credentials were not pre-filled in the login form after the first start. This issue has been fixed.
  • General: The time taken to backup the data using backupdb.bat has now been optimized.
  • OpManager MSP: Previously, all the central users were listed in Notification Web alarm page. This issue has been fixed now, and only the users with access to the probe will be listed.
  • OpManager MSP: For the default admins in MSP Probe, the option to edit Email address has been provided.
  • OpManager MSP: Previously in 127189 version, when a new Probe was installed, new user management data were not synced from the Central to Probe server. This issue has now been fixed.
  • OpManager: Fixed the XSS vulnerabilities found under the Data Collection Error Handling page.
  • NCM: Now, REST support has been introduced for ArubaOS-CX devices.
  • NCM: Now, In client server settings, the option to remove charts of PDF format is available .
  • NCM: Now, customer can request vulnerability data by sharing the device's OS version information.
  • NCM: Now, users can schedule Advanced reports.
  • NCM: Now, an option to schedule SNMP operations like interface, VLAN, Syslocation & Description, and Device SysOID is available.
  • NCM: Earlier, there was a sync issue in Custom Column values and System Details between the Probe and Central servers. This issue has been fixed now.

Build No 127242 - September 20, 2023

  • OpManager: In some cases, the data in an exported PDF could not be viewed clearly. This issue has now been fixed.
  • OpManager: A new category of reports called Trend reports has been introduced, where CPU, Memory, and Disk utilization trends can be viewed.
  • Enterprise Edition: PPM Upgrade failure in OpManager Essential to Enterprise migrated probes from versions older than 127185 to latest, has been fixed.
  • OpUtils: Introducing AD Users tab under Settings. This feature enables users to retrieve AD user details from the Active Directory. It also allows effortless tracking of AD user information associated with IP addresses. This can be achieved by simply hovering over the Logged On User field in the IP Details tab.

Build No 127241 - September 12, 2023

  • OpManager: Previously, it was possible to import an empty file through 'Import Devices' action under Maps page. This has been fixed now.
  • OpManager: More actions dummy button (three-dots) displayed under the Network > 'Switches' list view page has been removed now.
  • OpManager: The default IP SLA widgets on the dashboard can now be configured to show the 'Top N' and 'Bottom N' data.
  • OpManager: Users can now update the monitoring interval of the IP SLA monitors via 'Edit' icon available in the IP SLA monitor snapshot page. Henceforth, the monitoring interval can be configured only in minute(s).
  • OpManager: Scheduled rediscovery is now supported for Meraki Controller and its associated devices. During the rediscovery, the IP Address, Display Name and Network Details of the devices will be updated.
  • OpManager: Henceforth, users will be able to choose the properties to be updated during rediscovery of a device. This option will be available under Settings > Discovery > Discovery Settings page.
  • OpManager: Previously, the non-reachable devices were added to the inventory during scheduled discovery, if devices existed in the add-on modules (such as NFA,NCM,etc.). This issue has been fixed now.
  • OpManager: Previously, when a device is rediscovered with both SNMP and Non-SNMP credentials, the device properties were updated. This issue has been fixed now.
  • OpManager: Henceforth, the Switch stack topology map will support dual stack port links.
  • OpManager: Users can now save an Interface Discovery Profile and schedule it as required.
  • OpManager: Under interface discovery, a new option that allows users to select and discover deleted interfaces has been introduced.
  • OpManager: Previously, in Report Builder, creating Interface Reports failed with an UI error. This has now been fixed.
  • OpManager: Internationalization issue with the display name of 'Top Call Performance by Location' dashboard widget has been fixed.
  • OpUtils: Previously, under Switch Port Mapper, in Port View tab, users faced an issue with the port groups resetting to it's default count (16) when the OpUtils service was restarted.
  • OpUtils: Previously, in the "Discovered Subnets" section under IP Address Manager's Tree View, users faced an issue where selecting a different Subnet Mask would change the Subnet Address and would not work when approving a subnet. This has now been fixed.
  • OpUtils: Under Switch Port Mapper, users can now also view the Sys Name of switches on the Tree View.
  • OpUtils: Previously, under Switch Port Mapper, in the Ports tab, users faced an issue with searching and sorting the Vendor column. This has now been fixed.
  • OpUtils: Previously, under IP Address Manager’s IP Details tab, users faced an issue with using the Authenticity options in the Filter dropdown . This has now been fixed.
  • OpUtils: Previously, under IP Address Manager’s IP Details tab, users faced an issue with marking IPs as Guest using the "Mark as" option. This issue has now been fixed.
  • OpUtils: Under Network, in the OpUtils add-on's IP Management tab, users can now add IPv4 and IPv6 subnets, supernets, and DHCP servers using the Add drop down button.
  • OpUtils: Previously, under IP Address Manager, while adding DHCP servers, users faced an issue with using a few special characters in the password field . This has now been fixed.

Build No 127240 - September 5, 2023

  • OpManager MSP: Introduced support for Agent-Based Server Monitoring (Monitoring Agents), for OpManager MSP & RMM Editions.
  • OpManager: For "Forecast Reports", introduced support for network devices.
  • OpManager: For agent-monitored devices, the real-time availability alerts will now be triggered, when the monitoring end server is rebooted.
  • OpManager: For agent-monitored devices, the device down availability alert will now be raised only on ICMP ping failure, when the agents are in inactive state.
  • OpManager: Custom widgets for 'Devices by Disk Utilization' have now been added to the dashboard, under the Health and Performance Widget Groups.
  • OpManager: New actions such as Associate and convert to MonitoringAgent, have now been Introduced under Settings-> ITOM Agents -> Monitoring Agents.
  • OpManager: The forecast period will now be restricted to six months, to forecast values even more accurately.
  • OpManager: The value calculation of VMware Host Average CPU Utilization (VIWebService) monitor has now been changed to provide accurate values.
  • OpManager: Under Settings -> ITOM Agents -> Monitoring Agents page, IP address will now be displayed along with the display name in the mapped devices section, while associating an agent to a device.
  • OpManager: Introduced a 'View Uninstalled Agents' button, under the Monitoring Agents page, to list all the agents that are being uninstalled.
  • OpManager: Previously, the SNMP monitors that were associated from Settings -> Performance monitoring were not fetching the data properly for virtual devices. This issue has been fixed now.
  • OpManager: Previously, the Last polled value of a String type monitor with Numeric output was always displayed as Zero ('0'). This issue has been fixed now.
  • OpManager: Fixed the XSS vulnerabilities found under the Monitoring Agents page.
  • OpManager: For OpManager versions 126262 and above, there were few issues with the VMware discovery or rediscovery processes, due to SSL handling. This has been fixed now.
  • OpManager: Under Support -> System Performance -> Polling Statistics, agent-Monitored devices will now be included in the SPOLL Protocol related statistics.
  • OpManager: Previously, all SNMP devices were listed in the Hardware Health Report, instead of just the hardware devices. This has been fixed now.
  • OpManager: Previously, there was an issue while configuring threshold values for a newly associated string monitor to a device template. This has been fixed now.
  • OpManager EE: For Enterprise Editions, the executable zip file of OpManager agent will now be downloaded along with probe-specific names.

Build 127198 - September 11, 2024

  • General: After migrating to JRE 1.8.0_362, from version 12.7 and above there were issues with response data compression, if SSL was enabled. This has been fixed now.
  • General: In Proxy Server Settings, input validation has been implemented for the "Server name or IP" field to prevent security vulnerabilities.
  • General: Previously, some mail servers didn't recognize the "NOOP" command used during communication. To fix this, an option has been provided to ignore the command for smooth communication.
  • General: Since Microsoft continues to support basic authentication for SMTP mail communication, the "OAuth Support Available" suggestion pop-up has been removed.
  • General: Previously, there were issues with trusting the certificate of external service URLs when Proxy Settings were configured, which affected functionalities which require access to external URLs, like Storage device discovery, Third party integrations, etc. This issue has now been fixed.
  • General: When scrolling through the dashboard, few widget's tooltip was not displayed properly.This has been fixed now.
  • OpManager: The SQL injection vulnerability identified in the URL Monitoring has now been fixed. [Reported by: CrisprXiang, Cokebeer and LFY. Refer: CVE-2024-6748]
  • OpManager: A Remote Code Execution (RCE) vulnerability could be exploited by users with 'Write' access to the 'Deploy Agent' action in the UI. This has been fixed now. (Reported by Daniel Santos. Refer: CVE-2024-5466)
  • OpManager: Previously, if the date format contained a single quote character, the graph data of a device performance monitor couldn't be exported as an Excel report. This issue has been fixed now.
  • OpManager: Previously from version 125415, When the "Notification Profiles Applied by Device" report under Reports>Inventory tab was exported, there was some mismatch in the data. This has been fixed.
  • OpManager: Previously, Japanese characters were distorted when OpManager alarms were being sent out as messages via Microsoft Teams. This issue has been fixed now.
  • NCM: Previously there was an issue with viewing generated reports within the Schedule Audit section. This issue has been fixed now.
  • NCM: Previously there was an issue with sending reports via email. This issue has been fixed now.
  • NCM: Previously there was an issue with generating the user access report. This issue has been fixed now.
  • NCM: Now, the backup failure alarm for devices will only be triggered if the devices have been successfully backed up at least once.
  • NetFlow: Support ID : 9895903 - The default IP groups in Japanese builds have been deleted.
  • NetFlow: Support ID : 9683403 - Previously, users faced issues in updating Geo location. This has now been fixed.
  • NetFlow: The issue with adding aggregated alert profiles with custom time frames has been fixed.
  • NetFlow: The issue in loading application data for alarms generated from Interface group alert profiles has been fixed.
  • NetFlow: The issue in exporting CSV for Percentile report and Consolidated report has been fixed.
  • NetFlow: Export PDF for AS to AS Individual graph has been fixed.
  • NetFlow: The issue with mail attachments in the Search Report for IP group has been fixed.
  • NetFlow: Previously in some cases, upgrades failed due to the presence of special characters in schedule file names. This issue has now been fixed.
  • NetFlow: The default rebranding name has been corrected from "Netflow Analyzer" to "NetFlow Analyzer."
  • OpManager: Support ID : 10028419 - Previously, scheduling Interface reports with non-English characters in the schedule name failed. This has been fixed now.
  • General: Previously, CSRF vulnerability (ZVE-2024-1132) was detected where the external users were able to utilize the network tools without authentication to perform ping or SNMP ping on network devices. This has now been fixed. (Reported by Jayateertha Guruprasad).
  • Firewall: Support ID : 9843348 - Duplicate device addition issue in WatchGuard firewall has been fixed.
  • Firewall: Support ID : 9945420 - The timestamp parsing issue in Squid device syslog has been rectified.
  • Firewall: Support ID : 9851397 - If we import Configuration file with text file format while adding the device-rule, It is not working. This issue is fixed now.
  • Firewall: Support ID : 9891222 - The issue with the object details link not being shown for an object in SRX has been fixed.
  • Firewall: Support ID : 9655565 - The issue with the Watchguard optimization page loading has been fixed.
  • Firewall: Support ID : 9810936 - The "processing many requests" error that occurred when importing logs via a remote host has been resolved.
  • Firewall: Few I18N key values updated as per Japan team request.
  • OpManager EE: Earlier, users could not create groups or business views in Central with the same names as those in Probe. This issue has been fixed now.
  • OpManager: Previously, there were overlapping issues with tooltip that appear upon hovering on the shortcut icon in a Business view widget. This has been fixed now.
  • General: Previously, there was a translation issue with "Add Role" on the Roles page. It has now been fixed.
  • General: Previously, there was an issue with displaying error messages while creating a workflow. This has now been fixed.
  • OpManager: Previuosly, a 'more' icon was displayed under the Network tab although all the sub-tabs were visible. This issue has been fixed now.
  • Enterprise Edition : When unified console is enabled, during the user re-sync process after upgrading to version 127131 or above, if a user with the same name already exists in Probe, the newly synced Central user (with suffix _noc) should be greyed out in Probe UI with no login access. An issue with this behaviour has now been fixed.
  • OpManger: Previously, the "Create RCA" option was hidden in the Alarm snapshot tab. It has now been fixed.
  • OpManager: A stored XSS vulnerability was discovered in Schedule reports. This has now been fixed.(Reported by Muhammed Mekkawy.)
  • OpManager: Support ID : 9529915 - Previously, when scheduling a report for multiple node monitor graphs like partition details, free disk space, used disk space, etc, a report for a random node was generated instead of the user specified nodes. This issue has been fixed.
  • OpManager: Previously, when devices were deleted in bulk, there was a problem in deleting the corresponding monitoring agents. This issue has been fixed now.
  • OpManager: Previously, some false availability alerts were raised for agent-monitored devices when OpManager got shut down abruptly and restarted. This issue has been fixed now.
  • OpManager: Previously, the SNMP monitors that were associated from Settings -> Performance monitoring, were not fetching the data properly for virtual devices. This issue has been fixed now.
  • Enterprise Edition: Previously, in some instances, Hardware information changes were not synced from the Probe to the Central Server. This issue has now been fixed.
  • OpUtils: Previously, users faced an issue during router scanning. This has now been fixed.
  • OpUtils: Previously, there was an issue with updating the Fortinet and Huawei routers using CLI device types. This issue has now been fixed.
  • OpUtils: Previously, users received emails indicating new MAC addresses were detected, even for existing ones. This issue has been resolved.
  • OpUtils: Previously, there was an Out Of Memory (OOM) issue in Cisco switches caused due to large number of VLAN IDs. This has now been fixed.
  • OpUtils: Previously, under Reports, in the IP Request tool, users faced an issue with selecting Available IPs from the Preferred Subnet, when using the console in non-english languages. This has now been fixed.
  • OpUtils: Previously, under IP Address Manager, there was an issue with updating non-English data to Alias name, Asset Tag and Sys Location on IP edit page. This issue has been fixed
  • OpManager: Previously in OpManager, there was an issue with hiding the OpUtils and Firewall dashboards in the edit tab action. This has now been fixed.
  • OpManager: Previously, users were unable to update the device template with sysoid criteria when OpManager is installed in non-english OS. This has been fixed now.
  • OpManager: Previously, multi-byte characters were not supported in the profile name of Network path analysis. This issue has now been fixed.
  • OpManager: Previously, the Scheduled Interface Bandwidth Report displayed same values for minimum, maximum and average traffic when fetching raw/polled data. This has been simplified by displaying Rx Traffic, Tx Traffic and Total Traffic.
  • OpManager: Due to an internal issue, a Layer2 Map would only show partial device mapping during rediscovery. This issue has now been fixed.
  • OpManager: Previously, if a discovery profile was created with a name similar to an existing profile (case-insensitive), a message showing successful profile creation would be shown although the profile would not be created. This issue has been fixed now.
  • OpManager: Previously, there was an issue in the UI alignment of the Inventory and Alarms pages, where the added filters overlapped with each other. This misalignment has now been fixed.

Build 127196 - March 25, 2024

  • OpManager: Previously, if devices were double-encrypted with SNMP community encryption, there were problems in device actions. This issue has been fixed now.
  • OpManager: Previously, when SDP was configured with a very older version of OpManager, there was an issue when users tried to log in, after OpManager was upgraded. This issue has been fixed now.
  • OpManager: Previously, while creating custom monitors, if users choose a functional expression, even if decimal data type was selected, only the integer part of the decimal data type was being considered. This issue has been fixed now.
  • OpManager: Previously, during certain instances for agent-monitored devices, the CPU utilization monitor's data was not being stored when it's alternate OID 'CPU Utilization ProcessorInformation' was being used on threshold-enabled cases. This issue has been fixed now.
  • OpManager: Fixed the device availablity false alerts, that were previously being raised for agent-monitored devices, when their data transfer request failed.
  • OpManager: Previously, there was an issue with the probe name being displayed on OpManager's central dashboard. This issue has been fixed now.
  • OpManager: Previously, in OpManager Central, users faced an issue with selecting a port from the switch snapshot while having "All probe" enabled. This has been fixed.
  • OpManager: Previously, in OpManager Central, on the switch snapshot page under Port View, the export function for switch port data was non-functional when all probes were selected. This issue has been fixed.
  • OpUtils: Previously, there was an issue where the group names list did not appear when updating users in OpManager User Management. This issue has now been fixed.
    • ​​
  • OpUtils: Previously, users faced an issue while creating a new node on the IP Address Manager or Switch Port Mapper Tree View. This issue has now been fixed
  • OpUtils: Previously, under IP Address Manager and Switch Port Mapper modules, there was an alignment issue with the Alerts tables. This has now been fixed
  • OpUtils: Previously, there was a slowdown issue caused by an increase in thread count when scanning subnets too frequently or in bulk. This has now been fixed.

Build No 127191 - September 20, 2023

  • OpManager: Previously, in the Central Server, there was an issue in listing Groups under Inventory page. This issue has been fixed now.

Build No 127189 - August 30, 2023

  • General: The space character is now allowed in the username in OpManager, so AD users with spaces in their usernames can log in.
  • General: There was an issue while generating Certificate Signing Request (CSR) with wildcard DNS records (Ex: *.sample.com). This has been fixed now.
  • General: We have improved the truststore handling flow, which may help avoid frequent truststore corruption.
  • General: Prior to this release, users who are using the build 126278 or above would've received an error when clicking the zoom option on the CCTV view. This has been fixed now.
  • General: Encrypted File Transfer has been introduced in Virtual IP based failover setup.
  • General: Live Database backup (General Settings -> Live Backup) has been introduced for bundled PGSQL setups. The database backup can be scheduled, and can be backed up while the product is running.
  • General: There was an error alert shown while sending test mail, if SSL/TLS had been disabled. This issue has now been fixed.
  • OpManager EE: After upgrading to version 126322 or above, the Operator and Custom Role users created via AD Autologin from Central server, were not synced to the Probe servers. This issue has now been fixed.
  • OpManager Plus EE: The Operator and Custom Role users created through AD Autologin from Central server were not synced to the newly installed Probe servers. This issue has now been fixed.
  • OpManager MSP: While creating or updating an user, there was an issue during user sync at probes, if only a customer with no associated probe was selected. This issue has now been fixed.

Build No 127188 - August 25, 2023

  • OpManager: Users can now select and exclude the device categories to be synced with SDP OP, from the advanced settings option that is available under the SDP OP Configuration page.
  • OpManager: Previously, users could only raise tickets in SDP OP using the default request template. Now, users can select their desired template from the advanced settings option, under the SDP OP configuration page.
  • OpManager: Users can now enable and customize the closure and status change comments from the advanced settings option when changing the SDPOP request status, under the SDP OP configuration page.
  • OpManager: Previously, users were able to sync only 8 device categories from OpManager to SDP OP. This has now been extended to support all categories, including custom ones.
  • OpManager: Newly added custom fields of devices, will now be synced from OpManager to SDP OP.
  • OpManager: Previously, there was an issue while integrating Microsoft Teams with OpManager. This issue has been fixed now.
  • OpManager: Introduced Japan domain support (.jp) for ServiceDesk Plus Cloud Integration.
  • OpManager: Previously, ServiceNow Incident's impact and urgency was assigned based on the priority selected under the notification Profile. Now, users can choose the same under the notification profile, instead of being assigned based on priority.
  • OpManager: Previously, the device details update was too slow when the integrations were enabled. This issue has been fixed now.
  • OpManager: Upgraded certain JARs in Google OAuth Client Library to their latest versions, to prevent potential security vulnerabilities.
  • OpManager: Previously, WMI and CLI data collection failed due to credential loading issue. This has been fixed now.
  • OpManager EE: Previously, in versions 127131 and above, there were issues in exporting Netflow reports via mail when the probe dropdown was selected in OpManager Central's UI. This issue has now been fixed.
  • OpManager EE: After upgrading to version 126322 or above, Central - Probe users sync failed if user profile image files were missing in Central server. This issue has been fixed.
  • OpManager MSP: Users were able to sync only 8 device categories from OpManager MSP to SDP MSP. This has now been extended to support all categories, including custom ones.

Build No 127187 - August 18, 2023

  • OpManager EE: In OpManager Enterprise Edition's NetFlow add-on, Collector dashboard has been added for LiteCentral mode.

Build No 127186 - August 11, 2023

  • OpManager: Henceforth, users can enable/disable the VPN Tunnel monitoring from the 'VPN' tab of the firewall device snapshot page.
  • OpManager: Custom widgets for 'VPN Tunnels Summary' and 'VPN Tunnels Down' have been added to the dashboard.

Build No 127185 - August 10, 2023

  • OpManager Plus: Introducing Enterprise edition for OpManager Plus to monitor and manage geographically distributed networks.
  • OpManager MSP: External Rest API access will be supported in the OpManager MSP.
  • OpManager: SMS server settings for APM plugin, can now be synced from the SMS server settings page, under OpManager.
  • OpManager: Introduced support for the embed view option, under dashboard and NOC view, for APM plugin-related widgets.
  • OpManager: Tilde character(~) is now supported as a valid prompt character in Add credential page.
  • OpManager: There was an issue while Associating / Dissociating devices, when more than 100 devices were associated to a monitor or a credential. This has been fixed.
  • OpManager: Previously, Customers were not able to access APM, while logging into mobile applications through HTTP. This has been fixed now.
  • OpManager: Previously, there was an issue with connecting to the APM plugin database, if the hostname contained the OpManager's database name. This has been fixed now.
  • OpManager: Previously, auto logged in AD users were not directly synced with the APM plugin. Now, OpManager user profiles with "Administrator" and "Operator" privileges, will be synced with "Admin" and "User" privileges in APM plugin, respectively.
  • OpManager: Previously, under OpManager's applications tab, users were not able to access the configure alarms page, from the APM admin server. This has been fixed now.
  • OpManager EE: Previously, from versions 12.7.131 and above, there were issues in exporting Firewall reports, when the probe dropdown is selected in OpManager Central's UI. This issue has now been fixed.

Build No 127142 - January 04, 2024

  • General: Now, the Maverick package has been updated to version 1.7.56 in response to CVE-2023-48795.
  • General: Previously, path traversal vulnerability (CVE-2023-47211) was detected for MIB browser. This issue has now been fixed by implementing path sanitization, ensuring that a new MIB is stored exclusively under the "OpManager/mibs" directory.

Build No 127141 - November 17, 2023

  • OpManager Enterprise: Previously, there was an upgrade failure caused by a device data sync issue in the Config Management module. This issue has been fixed now.

Build No 127140 - October 20, 2023

  • OpManager: Previously, there was an issue while integrating Microsoft Teams with OpManager. This issue has been fixed now.
  • OpManager: Earlier, there was an upgrade failure due to Network Configuration Manager device data sync issue. This issue has been fixed now.
  • OpManager: From version 127133, slowness was observed in the Interface list view page when a filter was chosen. This issue has been fixed now.

Build No 127138 - September 22, 2023

  • OpManager: Previously, there were issues in listing Groups under Inventory page in the Central Server. This has been fixed now.

Build No 127136 - September 04, 2023

  • General: There was an error alert shown while sending test mail, if SSL/TLS had been disabled. This issue has now been fixed.
  • General: sum.bat failed File Integrity scanning while upgrading from version 12.7.003. This issue has now been fixed.
  • OpManager: Previously, WMI and CLI data collection failed due to credential loading issue. This has been fixed now.
  • OpManager EE: Previously, from versions 12.7.131 and above, there were issues in exporting Firewall reports, when the probe dropdown is selected in OpManager Central's UI. This issue has now been fixed.
  • OpManager EE: Previously, from versions 12.7.131 and above, there were issues in exporting Netflow reports via mail when the probe dropdown was selected in OpManager Central's UI. This issue has now been fixed.
  • OpManager EE: After upgrading to version 126322 or above, Central - Probe users sync failed if user profile image files were missing in Central server. This issue has now been fixed.
  • OpManager EE: After upgrading to version 126322 or above, the Operator and Custom Role users created via AD Autologin from Central server, were not synced to the Probe servers. This issue has now been fixed.
  • OpManager MSP: While creating or updating an user, there was an issue during user sync at probes, if only a customer with no associated probe was selected. This issue has now been fixed.
  • OpUtils: Previously, under OpManager Central's switch snapshot page, users faced an issue with exporting the switch port details. This issue has now been fixed.
  • OpUtils: Previously, under IP Address Manager, users faced an issue with adding new scopes to the monitored Cisco DHCP server. This has now been fixed.

Build No 127134 - August 4, 2023

  • Enterprise Edition: An option has been introduced in the Central server's DB query page to enable users query Probes using the drop down menu.
  • Enterprise Edition: A new report on Alarm Suppressed devices have been introduced in the Central.
  • Enterprise Edition: During the probe startup, if there was no communication between the central and the probe, time-zone conversion for historical data failed. This issue has been fixed now
  • OpUtils: Previously, under IP Address Manager, users faced an issue with scanning DHCP servers when there are two or more DHCP servers with the same scope. This has now been fixed.
  • OpUtils: Previously, under Switch Port Mapper, users faced an issue with retrieving the port details when the Sys OID is empty during a CISCO switch scan. This has now been fixed.
  • OpUtils: Previously, under IP Address Manager, in IP Details tab, users faced an issue with importing IP address details while using a few special characters. This has now been fixed.
  • OpUtils: Previously, there was an issue with scanning routers when the SNMP Retries and SNMP Time Out values are high. This has now been fixed.
  • OpUtils: Previously, under IP Address Manager, in Donut View, there was an issue in the Filter by tab, when clicking on the Available segment of the Donut View. This has now been fixed.
  • OpUtils: Under IP Address Manager, in Subnet Summary tab, we've enhanced the Edit Custom Columns's drop down style.
  • OpUtils: Previously, under Switch Port Mapper, users were not able to delete switches from the Tree View. This has now been fixed
  • OpUtils: Previously, under Reports, in the IP Request tool, users faced an issue with selecting Available IPs from the Preferred Subnet, when using the console in non-english languages. This has now been fixed.
  • OpUtils: Previously, in OpManager Central, under Dashboard, the IPAM and SPM Widgets were displayed when creating a New Dashboard, even if the user does not have access to the IPAM and SPM add-on. This has now been fixed.
  • OpUtils: Previously, under IP Address Manager, Switch Port Mapper, and Alarms's Donut View, users faced an issue with the filter values while selecting a donut segment. This has now been fixed.
  • OpUtils: Previously, under Alarms, users faced an issue with unselecting subnets or switches while using the filter. This has now been fixed
  • OpUtils: Previously, under Networking Tools, in Network Monitor, users faced an issue with the filter values while using the status tab filter. This has now been fixed.
  • OpUtils: Previously, under Toolset in Address Monitoring's MAC IP List tab, the Export button was not working. This has now been fixed.
  • OpUtils: Previously, in OpUtils add-on's Address Monitoring tools under Toolset, users faced an issue with the IP address and MAC address columns not getting displayed when exporting MAC IP List. This has now been fixed.
  • OpUtils: Previously, under IP Address Manager's IP History tab, users faced an issue with exporting a single subnet's data. This has now been fixed.
  • OpUtils: Previously, under Rogue Detection, users faced an issue with viewing the status banner while updating or deleting MAC address details. This has now been fixed.
  • OpUtils: Previously, under Settings -> OpUtils -> Scheduler, in the IP Address Manager tab, users were not able to schedule scans for IPv6 addresses. This has now been fixed.
  • OpUtils: Previously, under Network Monitoring Tools, in Bandwidth Monitor , users faced an issue with the auto refresh option while discovering new interfaces. This has now been fixed
  • OpUtils: Previously, under Toolset in CLI Query Tool, users faced an issue where the default SSH port value was displayed as 23 instead of 22. This has now been fixed.
  • OpUtils: Prveiously, under Toolset, in MIB Browser, users were not able to retrieve or add Object IDs for nodes which had more than 100 character length. The length has now been increased to 250.
  • OpManager: Previously, the decimal type in CLI monitors was displaying values as integers. This issue has now been resolved.
  • OpManager: Previously, there was a WMI data collection issue when devices were taking too long to respond for WMI requests. This issue has been fixed now.
  • OpManager: Alarms suppression metrics have been introduced for the Devices and Alarms module under the Advanced Reports feature.
  • OpManager: Now push notifications are supported in iOS mobile versions when FIPS mode is enabled.
  • OpManager: Previously, there was a mismatch in the data displayed between the graph in the UI, and the graph in the exported pdf. This issue has been fixed now.
  • OpManager: Previously, the Device Availability report was fetching incorrect data for the business view scope user having access to more than one business view. This issue has been fixed now.
  • OpManager: Introduced a new widget that allows users to visualize the Top N problematic devices, based on the active alarm count.
  • OpManager: Fixed the issues faced with VMware discovery and rediscovery, that happened while updating the virtual machine details, if the migration had occurred.
  • OpManager: Previously, while updating HyperV inventory, in certain instances, the virtual machines which were not selected for discovery, were discovered as HyperV VMs. This has been fixed now.
  • OpManager: Previously, during HyperV rediscovery, if a VM was marked as orphaned, and another VM was added with the same IP address in the host environment, then the VM was not being discovered. This has been fixed by discovering the new VM and deleting the device mapping of the orphaned VM.
  • OpManager: Previously, in certain migration cases for VMware ESX-based discovery, there was an issue in device mapping due to which the virtual details were not being properly loaded in the VM's snapshot page. This has been fixed now.
  • OpManager: The error messages displayed, when vCenter was selected for discovering ESX devices, or when ESX was selected for discovering vCentre devices, have been handled.
  • OpManager: Retained the data collected for virtual monitors, by disabling them and not removing them, in case monitoring was stopped for VMs that were not previously orphaned.
  • OpManager: The database operations that were carried out during the Nutanix inventory update, have now been optimized for better performance.
  • OpManager: Introduced two new columns, in the advanced reports for VMware, and Nutanix virtual machines respectively.
  • OpManager: Introduced support for 6 new CLI monitors for Linux and Solaris devices respectively, 8 new CLI monitors for IBM-AIX devices, and 3 new CLI monitors for HP-UX devices.
  • OpManager: Previously, in the Performance monitor settings page, users were not able to edit and save the monitors that didn't have any unit value. This issue has been fixed now.
  • OpManager: The VM inventory pages that are available under the virtualization tab, have now been paginated.
  • OpManager: Previously, few CLI performance monitors had "Telnet" in their description. This has now been rephrased to "CLI".
  • OpManager: Under the performance monitors tab of the device snapshot page, a view instances option has been introduced for the last polled values column for monitors having multiple instances.
  • OpManager: Previously, under the process by absolute memory report, no records were being shown when the "All" criteria was selected. This issue has been fixed now.
  • OpManager: Previously, while exporting alarms from the alarms tab, the reports contained only default columns. Now all the selected columns will be exported.
  • OpManager: Previously, there was a failure in the data collection of SNMP monitors due to dual encryption of the community string. This issue has been fixed now.
  • OpManager: An option has been provided for the Data Collection Manager to retry the polling periodically, instead of disabling the non-responsive Monitor(s)/Interface(s).
  • OpManager: For better usability, a breadcrumb navigation has been introduced for Performance, Packet Loss, Response Time, Transmit, Receive and Forecasting graph pages.
  • OpManager: Henceforth, whenever there is a problem in data collection scheduling, alerts will be generated to notify the user regarding the same.
  • OpManager MSP: Previously, URL Monitors were not shown in the infrastructure widget. This has been fixed now.
  • OpManager: Previously, in certain instances, the monitoring agent crashed while the agent-server socket connection was closed. This issue has been fixed now.
  • OpManager: Under Settings -> Monitoring -> Script templates, introduced a new column called "Associated devices count".
  • Enterprise Edition: Previously, the Monitoring interval updated in the Probe was not pushed to the Central server due to an internal issue. This has now been fixed.
  • OpManager: Henceforth, enabling or disabling of the "Restrict device sync from Add-on" option in Discovery Settings will be audited.
  • OpManager: Henceforth, the health status of a Group will be determined by the maximum severity among all devices in the group.
  • OpManager: Post re-discovery, there was a mismatch in the device properties displayed in the Meraki Controller snapshot page and the individual device snapshot page. This issue has now been fixed.
  • OpManager: Henceforth, upon the discovery of a Wireless LAN Controller, the Advanced Monitoring of access points will be automatically initiated if the customer has an Access Point License.
  • OpManager: The device availability alerts for the Access Points will now be handled based on high availability configuration.
  • General: Under dashboard, the "Custom" sub-tab has been rephrased to "Custom Dashboard".

Build No 127133 - August 2, 2023

  • OpManager: HP Aruba Switch Stack monitoring is now supported for the following device types; Hewlett-Packard 3800 48G-PoE+-4SFP+ (J9574A), HP Aruba2920-48G-POE+, HP Aruba3810M, HP ARUBA 2930F 24G 4SFP (L253A), HP Aruba5400R, and HP Aruba 2930M Switch Stack.
  • OpManager: Zoho Maps has been upgraded from 8.5.1 to 8.7.7 version.
  • OpManager: Pagination has been introduced to the Groups list view page to optimize loading time.
  • OpManager: Users will now be able to view the corresponding custom fields, Rx Traffic and Tx traffic columns under Inventory -> Interfaces list view page.
  • OpManager: A new category of reports namely Capacity Planning has been introduced. This report category covers the data of idle, overutilized and underutilized servers.
  • OpManager: During Switch stack discovery or rediscovery, the serial number of the master switch will now be updated to the 'Serial Number' custom field.
  • OpManager: Support for Serial Number and Model Name has been introduced for a few 'Palo Alto' firewalls and 'Cisco' stack switches.
  • OpManager: Support for OS Version has been added for a few Palo Alto 3200 series firewalls.
  • OpManager: Henceforth, on the group snapshot page, the group name will be displayed with a breadcrumb element, for users to be able to navigate to the parent group, or the groups list.
  • OpManager: Henceforth, when "Poll using IP address" is enabled, the corresponding DNS name will be automatically updated in case of any change.
  • OpManager: Henceforth, the data that is displayed in the 'Heat Map' widget of the Dashboard, will be sorted according to device status.
  • OpManager: The archiving of device availability data during OpManager startup, has been optimized.
  • OpManager: Under Business View page, the scroll bar wasn't displayed in the Dashboard View. This issue has been fixed now.
  • OpManager: Network Discovery profiles can now be saved directly without scanning the network.
  • OpManager: Wireless access points can now be polled for availability using ICMP protocol. However, this functionality can only be enabled manually from the product installation folder.
  • OpManager: Previously, under the Inventory page, searching for the devices using custom field wouldn't work if the custom field was longer than 50 characters. This has been fixed now.
  • OpManager: Previously, the scroll bar wouldn't function when searching for a non-existent custom field under the inventory device list. This has now been fixed.
  • OpManager: Previously, the Discovery Rule Engine could not be associated to devices discovered in bulk (comma separated IP addresses) from the Add Device / Server page. This issue has been fixed now.
  • OpManager: Previously, there were issues with import devices in Zoho map (when Google Map was not configured). This issue has been fixed now.
  • OpManager: Previously, the data collection would fail due to improper SNMP community encryption when updating the RAM / Hard disk size. This issue has been fixed now.
  • OpManager: Previously, slowness was observed across the OpManager UI due to an internal issue in interface data collection. This has been fixed now.
  • OpManager: While saving a Layer2 Map as Business View, the devices whose IP addresses could not be resolved were skipped. This issue has now been fixed.
  • OpManager: Previously, the 'Last Connected Time' under the VPN Summary of Cisco Firewall device snapshot page, was displayed incorrectly. This issue has now been fixed.
  • OpManager: Previously, the Discovery Rule Engine was executed during Scheduled Discovery even if it was disabled. This issue has now been fixed.
  • OpManager: During Layer 2 discovery, there were issues in rendering the map due to duplicate device mappings. This issue has now been fixed.
  • OpManager: Devices discovered via Scheduled discovery or rediscovery, were incorrectly mapped to the Discovery Rule Engine actions. This issue has now been fixed.
  • OpManager: In some scenarios, the interface data collection was terminated due to an internal issue. This has now been fixed.
  • OpManager: The out of memory (OOM) error arising due to bulk SNMP requests sent during Layer2 discovery has been fixed now.
  • OpManager: Henceforth, the "In Speed" and "Out Speed" fields of an interface can only be configured using the "Mbps" unit.
  • OpManager: Previously, the status of a group was not updated when, either the devices present in a group were deleted or a few custom field values were updated for those devices. This issue has now been fixed.
  • OpManager: Previously, the Interface Group status was not updated correctly after deletion of the interfaces by deleting the parent device. This issue has been fixed now.
  • OpManager: Previously, inappropriate data transfer was observed from Probe to the Central server during the data collection of WLC devices and IP SLA monitors. This has been fixed now.
  • OpManager: Previously, users were unable to fetch the interface reports (under Report builder) for the 8AM - 8PM time window. This issue has been fixed now.
  • OpManager: Previously, the group filter wouldn't take effect when scheduling the Device Availability Dashboard Report. This issue has been fixed now.
  • OpManager: Previously, there were issues in restoring the OpManager database backup if there were more than 20 custom fields associated to any devices. This issue has been fixed now.
  • OpManager: There was an issue in upgrading PPM from version older than 12200 to the latest version. This issue has now been fixed.
  • OpManager: When any of the module tabs (such as Inventory, Server, etc) were placed before the Dashboard tab, the home page failed to load, upon user login. This issue has been fixed now.
  • OpManager: Previously, under "Settings -> ITOM Agents -> Agents", the export as pdf and XLS options were not working properly. This issue has been fixed now.
  • OpManager: The "Agents" tab under the "Settings -> ITOM Agent" page has now been renamed to "Monitoring Agents".
  • OpManager: Introduced a new sub-tab under the "Servers" tab called "Monitoring Agents", that will display all the agent-monitored devices.
  • OpManager: A "View Agents" button has been introduced under the "Settings -> Discovery-> Deploy Agent" page, to navigate users to the Monitoring Agents page.
  • OpManager: Previously, while deleting agents, the agents with non clear status could not be deleted. This issue has been fixed now.
  • OpManager: Previously, for agent-monitored devices, under monitors graph, there was a mismatch issue in the data collected time, when the end monitoring server's system time was changed. This issue has been fixed now.
  • OpManager: Fixed the agent device specific up or down alerts, that were unnecessarily raised during the agent's self-recovery operations.
  • OpManager: Previously, while deploying agents remotely, the agent deployment failed for remote machines due to permission issues with the service creation. This issue has been fixed now.
  • OpManager: Previously, for agent-monitored devices, agent related custom parameters were reverted during the upgrade, which led to false alerts for device availability. This issue has been fixed now.
  • OpManager: Previously, the syslog received from a device, were not being displayed in the syslog viewer. This issue has been fixed now.
  • Enterprise Edition: Sometimes, there were issues in pushing the device availability & health status from Probe to the Central server. This has been fixed now.
  • OpManager MSP: In MSP Central, the 'Interface Discovery' option was not displayed when specific probe was selected. This issue has been fixed now.
  • OpManager Storage Monitoring: Users will now be alerted when a storage device's credential fails.
  • OpManager Storage Monitoring: New storage monitors for the following device templates have been added: IBM DS Series, IBM Spectrum Virtualize, Netapp ONTAP(Cluster), DELL EMC Data Domain, EMC Isilon Storage.
  • Enterprise Edition: Previously, in the Central Server, devices weren't visible in the Maps widget on the Dashboard. This has been fixed now.

Build No 127131 - July 18, 2023

  • General: Users can now customize the LDAP port that is used to bind with the domain controller under AD Authentication.
  • General: Previously, users wouldn't have been able to enable SSL if the private key inside the PFX file was password protected and it didn't match the the keystore password. This has been fixed by prompting the user to provide the key password in such cases.
  • General: If an OTP was not sent to the user's email address, an error message will be shown to check the mail server settings.
  • General: If any users request for an invalid URL, or if any internal server error happens while processing the request, we will present our customized error page containing the error message.
  • General: Previously there was an issue when configuring TFA email during user login, especially after upgrading to version 127000. This has been fixed now.
  • General: Previously, there was a Cross-site WebSocket hijacking vulnerability, which led to unauthorized access of websocket connection. This has been fixed now by configuring trusted origins. (Reported by CERTXLM. Refer : CVE-2023-29505)
  • General: There was an issue in versions 127100 and above, where the Restore operation failed to copy certain files, if the file's source was located outside of the OpManager directory. This has been fixed now.
  • General: Previously, when a large number of widgets were associated to a dashboard, occasionally the UI got frozen when loading it. This has now been fixed.
  • General: Previously, an OOM issue was reported during WebSocket communication between an agent and a probe. This issue has been fixed now.
  • General: REST API access will be disabled by default, for newly created users. Administrator users with complete access can enable/disable the access for themselves and others.
  • General: JRE has been migrated to version 1.8.0_362 for Professional, Standard and Lite editions during the upgrade.
  • General: Optional FIPS compliance mode can be enabled for fresh installations from version 12.7.131.
  • General: SSL support has been introduced for communication between the product and MSSQL.
  • General: Previously, in Failover Settings if email address had been configured, the secondary server would not take over, incase of primary server failure. This issue is applicable for the customers upgraded to versions 12.6.306 or above, and has been fixed now.
  • OpManager EE: Previously, after upgrading to version 126322 or above, users sync from Central to Probe will fail, if multiple domains were configured in the Central ,and if one of those domains were configured in the Probes before the upgrade. This issue has been fixed now.
  • OpManager MSP: Creating a new SNMP trap processor in a Probe selected from the Central server's UI, failed while trying to update the Match Criteria and Rearm Criteria fields. The issues have been fixed now.

Build No 127124 - January 04, 2024

  • General: Previously, path traversal vulnerability (CVE-2023-47211) was detected for MIB browser. This issue has now been fixed by implementing path sanitization, ensuring that a new MIB is stored exclusively under the "OpManager/mibs" directory.
  • General: To enhance security for Linux installations, User permission for the product folders has been modified and can be accessed only by the installed user. (Reported by Tenable. Refer : CVE-2023-6105)
  • General: Previously, there was an issue where the "Filters & Export" option was unclickable when navigating to Audit Reports via Report -> System -> Audit Reports. This issue has now been fixed.
  • General: We have improved the truststore handling flow, which may help avoid frequent truststore corruption.
  • General: Previously, an error occurred when refreshing specific dashboard pages, or while navigating between dashboards in products other than OpManager. This issue has been fixed now.
  • General: The space character is now allowed in the username in OpManager, so AD users with spaces in their usernames can log in.
  • General: There was an issue while generating Certificate Signing Request (CSR) with wildcard DNS records (Ex: *.sample.com). This has been fixed now.
  • General: The time taken to generate a Support information file has been optimized.
  • General: If the product was installed in Linux devices with non-english OS, attempting to download System Info under the System Performance page resulted in a download failure. This issue has now been fixed.
  • General: Previously, due to an uncleared cookie, there was an URL redirection issue while accessing server URL in a new browser window. This issue has been fixed now.
  • General: Previously, when there were more number of tabs, the navigation buttons under the main tab, was not working properly. This issue has been fixed now.
  • General: Now, the Maverick package has been updated to version 1.7.56 in response to CVE-2023-48795.
  • General: In TFA and SSL recommendation screens shown upon Super admin user login, a prominent "Skip" button and a new "Don't show again" option in UI has been introduced.
  • OpManager: Previously, an internal server error would occur when UPS type devices were rediscovered. This issue has been fixed now.
  • OpManager: Previously, when a user is updating the display name of a device that existed in more than one business view, the display name is updated as the device label. This issue has been fixed now.
  • OpManager: There was an issue while Associating / Dissociating devices, when more than 100 devices were associated to a monitor or a credential. This has been fixed.
  • OpManager: For OpManager versions 126262 and above, there were few issues with the VMware discovery or rediscovery processes, due to SSL handling. This has been fixed now.
  • OpManager: The value calculation of VMware Host Average CPU Utilization (VIWebService) monitor has now been changed to provide accurate values.
  • OpManager: Previously, while updating HyperV inventory, in certain instances, the virtual machines which were not selected for discovery, were discovered as HyperV VMs. This has been fixed now.
  • OpManager: Previously, during HyperV rediscovery, if a VM was marked as orphaned, and another VM was added with the same IP address in the host environment, then the VM was not being discovered. This has been fixed by discovering the new VM and deleting the device mapping of the orphaned VM.
  • OpManager: Previously, in certain migration cases for VMware ESX-based discovery, there was an issue in device mapping due to which the virtual details were not being properly loaded in the VM's snapshot page. This has been fixed now.
  • OpManager: Retained the data collected for virtual monitors, by disabling them and not removing them, in case monitoring was stopped for VMs that were not previously orphaned.
  • OpManager: For HyperV discovery, encoding has now been added during the xml parsing, for fetching few VM properties.
  • OpManager: There was an issue in displaying the time in the integrated report's UI. This issue has been fixed now.
  • OpManager: From now, Advanced reports and Integrated reports list will be sorted by using the report name.
  • OpManager: previously, in Scheduled pdf report some fields were empty. This issue has been fixed now.
  • OpManager: Two byte characters are supported in the Subject and Message fields, while configuring alarm escalation rules.
  • OpManager: For MSSQL users, there was a problem with displaying notes in the "All Alerts with Notes" section under System reports. This issue was identified in OpManager versions starting from 126115, and it has since been resolved.
  • OpManager: Internationalization issue with the display name of 'Top Call Performance by Location' dashboard widget has been fixed.
  • OpManager: Previously, there were issue while updating the Layer 2 Map name with two byte characters. This has been fixed now.
  • OpManager: Due to an internal issue, a Layer2 Map would only show partial device mapping during rediscovery. This issue has now been fixed.
  • OpManager: Previously, if a discovery profile was created with a name similar to an existing profile (case-insensitive), a message showing successful profile creation would be shown although the profile would not be created. This issue has been fixed now.
  • OpManager: Previously, if the folder name had a space in it, the send trap action under the notification profile did not work. This issue has been fixed now.
  • OpManager: Previously, there was an issue while integrating Microsoft Teams with OpManager. This issue has been fixed now.
  • OpManager: In the Eventlog monitoring, there was an issue in identifying the device in which OpManager has been installed. This issue has now been fixed.
  • OpManager: Previously, while deploying agents remotely, the agent deployment failed for remote machines due to permission issues with the service creation. This issue has been fixed now.
  • OpManager: Previously, for agent-monitored devices, File monitor data collection did not occur. This issue has been fixed now.
  • OpManager: From version 126277, an Internal Server Error occurred when Trap Processors were loaded from Mibs, as the Mib file name was different from the Mib module name. This issue has been fixed now.
  • OpManager: Previously, in certain instances, the monitoring agent crashed while the agent-server socket connection was closed. This issue has been fixed now.
  • OpManager Enterprise: From version 126322, in the central server there was an issue while generating CSR under Security settings -> SSL configuration. This issue has been fixed now.
  • OpManager Enterprise: Previously, after upgrading to version 126322 or above, user management data failed to sync from Central to Probe server, if the Probe server had been installed from version 11600 or below. This issue has been fixed now.
  • Enterprise Edition: Previously, from version 126329 and above, if proxy was enabled in the central server, the device snapshot page could not be opened. This issue has now been fixed.
  • OpManager MSP: Previously in 127123 version, when a new Probe was installed, new user management data were not synced from the Central to Probe server. This issue has now been fixed.
  • NCM: Previously in 127123 version, when a new Probe was installed, new user management data were not synced from the Central to Probe server. This issue has now been fixed.
  • NCM: Previously there was an issue with viewing generated reports within the Schedule Audit section. This issue has been fixed now.
  • NCM: Previously there was an issue with sending reports via email. This issue has been fixed now.
  • NCM: Earlier, exporting a large number of configurations took a significant amount of time. Now, this process has now been streamlined for faster exports.
  • Firewall: Support ID: 8816473, 9156166, 9164551 - The Japanese translation wasn't working for few tabs, values were shown in English. This issue is fixed.
  • Firewall: Support ID: 9157136 - When enabling the config backup schedule, the success message shown as 'disable' has been fixed.
  • Firewall: Support ID: 9164579, 9156194 - Japanese translation was missing for Duplicate Objects tab name and the Rule Admin enable option while creating Administrator privilege user in User Management. This issue is fixed.
  • Firewall: Support ID: 8824909 - The XLS report exported on the Object Usage page is not similar to the PDF report exported.This issue is fixed.
  • Firewall: Support ID: 9156046 - Unable to open a report downloaded from the 'Last Generated Report' on the custom report page. This issue is fixed.
  • Firewall: Support ID: 9164641 - Unable to export an XLS report on the Expiry Notification page, and a span tag is shown in the CSV file exported. This issue is fixed.
  • Firewall: Support ID: 9164876 - Unable to export an XLS report on the Object Usage page, and Japanese translation was missing in the CSV file exported. Both issues are fixed.
  • Firewall: Support ID: 9165331 - The colors of the Risk Level do not match the colors used in the chart on the Risk Analysis page. This issue is fixed.
  • Firewall: Support ID: 9164723 - Compliance Standards report export and on-demand mail failed on Linux machines when the generated PDF file is larger in size. This issue is fixed now.
  • Firewall: Support ID: 8747495 - Proxy server settings has been added now in General settings.
  • Firewall: Support ID: 8664950 - The import of Protocol group files failed when the file size was greater than 50 KB. This issue has been fixed now.
  • Firewall: Support ID: 5982896 - The Hourly and Weekly trend comparison graphs of the 'Traffic Trend Report,' 'Event Trend Report,' and 'Protocol Trend Report' were not displaying the data in the correct order. This issue has been fixed now.
  • Firewall: Exporting the raw logs report in the Raw search custom report failed. This issue has been fixed now.

Build No 127123 - September 04, 2023

  • General: There was an error alert shown while sending test mail, if SSL/TLS had been disabled. This issue has now been fixed.
  • OpManager: Previously, WMI and CLI data collection failed due to credential loading issue. This has been fixed now.
  • OpManager EE: After upgrading to version 126322 or above, Central - Probe users sync failed if user profile image files were missing in Central server. This issue has now been fixed.
  • OpManager EE: After upgrading to version 126322 or above, the Operator and Custom Role users created via AD Autologin from Central server, were not synced to the Probe servers. This issue has now been fixed.
  • OpManager MSP: While creating or updating an user, there was an issue during user sync at probes, if only a customer with no associated probe was selected. This issue has now been fixed.

Build No 127122 - August 22, 2023

  • General : Earlier, there was a minor bug during installation in OpManager Central. This bug has been fixed now.

Build No 127120 - July 25, 2023

  • General : Previously, in Failover Settings if email address had been configured, the secondary server would not take over, incase of primary server failure. This issue is applicable for the customers upgraded to versions 12.6.306 or above, and has been fixed now.
  • General : Previously, there was a Cross-site WebSocket hijacking vulnerability, which led to unauthorized access of websocket connection. This has been fixed now by configuring trusted origins. (Reported by CERTXLM. Refer : CVE-2023-29505))
  • General : There was an issue in versions 127100 and above, where the Restore operation failed to copy certain files, if the file's source was located outside of the OpManager directory. This has been fixed now.
  • OpManager EE : Previously, after upgrading to version 126322 or above, users sync from Central to Probe will fail, if multiple domains were configured in the Central ,and if one of those domains were configured in the Probes before the upgrade. This issue has been fixed now.
  • OpManager : While creating a custom report for Alarms module using the advanced report feature, an error message appeared when more than 5 columns were selected for the Device Details field. This issue has been fixed now.
  • OpManager: Under Business View page, the scroll bar wasn't displayed in the Dashboard View. This issue has been fixed now.
  • OpManager : Previously, for agent-monitored devices, agent related custom parameters were reverted during the upgrade, which led to false alerts for device availability. This issue has been fixed now.
  • OpManager : Previously, the syslog received from a device, were not being displayed in the syslog viewer. This issue has been fixed now.
  • OpManager MSP : Creating a new SNMP trap processor in a Probe selected from the Central server's UI, failed while trying to update the Match Criteria and Rearm Criteria fields. The issues have been fixed now.

Build No 127119 - June 30, 2023

  • OpManager: Previously, the label of links were misaligned in the edit Business view page. This issue occurred due to vis.js upgrade in 126264, and is fixed now.
  • OpManager : The MSSQL specific monitor data will now be displayed under the "MSSQL" tab of the device snapshot page of a MSSQL Device, instead of being displayed in the right pane.
  • OpManager : Introduced an option that allows users to export the audit reports(General), in PDF or XLS formats.
  • OpManager: The detailed statistics of the graphs can now be viewed for a maximum of 31 days (previously, 15 days). This can be configured under Settings > Database Maintenance > Graph Display Settings.
  • OpManager : Previously, when many URLs were added, the pages were loading slowly. This issue has been fixed now.
  • OpManager : Previously, there was an out of memory error due to the load in URL monitoring. This issue has been fixed now.
  • OpManager : When more than 10 URLs were deleted in bulk, the time taken to delete the URLs was quite long. This issue has been fixed now.
  • OpManager : Previously, when a sensor name was "NULL" for IPMI devices, the hardware tab was not loading properly. This issue has been fixed now.
  • Enterprise Edition : Earlier, there were some unwanted options available in OpManager's Central device snapshot for Enterprise Edition. These options are now removed.
  • OpManager : Enhanced the efficiency of polling, by optimizing the queries executed, when adaptive thresholds was enabled.
  • OpManager : Hardware monitoring support has now been introduced for Palo alto firewalls and Huawei switches.
  • OpManager : From OpManager version 12.6.151, data collection was delayed for agent-monitored devices, when the monitors load increased. This has been fixed now.
  • OpManager : Previously, when the OpManager service was down, some previously collected data was not updated for agent-monitored devices, thereby resulting in data loss. This issue has been fixed now.
  • OpManager : Previously, when the notification server startup issue occurred, the webclient UI faced loading issues for Linux-based OpManager installation. This has been fixed now.
  • OpManager : For agent-monitored devices, the alerts raised for CPU & Memory utilization monitors, will now be displayed along with the top three processes used.
  • OpManager : Previously, the data collected by the agent device was not plotted in a graph properly due to a timestamp issue. This has been fixed now.
  • OpManager : For Agent based Monitoring enabled VMs, data collection was not happening for virtual protocol-related monitors, if the monitors were associated from the Performance Monitors Settings page. This issue has been fixed now.
  • OpManager : Previously, users faced issues with Nutanix discovery, when a new Nutanix cluster was discovered with a UUID similar to an existing Nutanix cluster. This issue has been addressed by blocking the same.
  • OpManager : Fixed the issues related to VM migration cases in Nutanix discovery, and rediscovery.
  • OpManager : In the Alarms page, a new column has been added under table view to display the IP Address of the Alarm source.
  • OpManager : Users can now configure two interfaces when adding link between two devices in a Business View. Also, they can choose to display In/Out traffic of the respective interfaces.
  • OpManager : Henceforth, clicking on the link in a Business View will display the interface traffic details on a separate panel instead of redirecting to the interface snapshot page.
  • OpManager : Previously, there were issues in scheduling downtime for URL monitors. This has been fixed now.
  • OpManager : Introduced a new category of reports called "Performance Monitors by devices", that lists the devices and the corresponding performance monitors associated with them, along with their threshold configuration details.

Build No 127118 - June 22, 2023

  • General: Previously in the Alarms page, when no columns were selected from the Column Chooser for display, it resulted in broken UI. This issue has been fixed now.
  • OpManager: Under Alarms tab, three additional filter options have been added to sort the alarms by time.
  • OpManager: When the Rearm Criteria is configured but the Match Criteria is not configured for a Trap Processor, the associated trap alarm was not cleared. This issue has been fixed now.
  • OpManager: Previously, in the Alarms tab of a device snapshot page, the tooltip text of the alarm actions (Add Note, Acknowledge, Unacknowledge, Clear, Delete) would always be shown in English (US) irrespective of the selected language. This issue has been fixed for the respective languages now.
  • OpManager: Previously, when generating the Notification Profiles Triggered report, filtering using the corresponding notification profiles of a selected device was not possible because of an internal issue. This has been fixed now.
  • OpManager: Henceforth, if the user chooses to 'Suppress Alarms' of any device, the same will be reflected on the 'Recent Alarms' tab of a device snapshot page.
  • Enterprise Edition: File integrity alarm was raised in the OpManager Probe's tray icon. This issue has been fixed.
  • Enterprise Edition: When there is a delay in processing a Probe's data in the Central, an alarm will be raised to notify the user.
  • Enterprise Edition: Essential to Enterprise Edition Migration failed when there was a space in the Folder name. This issue has been fixed now
  • Enterprise Edition: Previously, due to an internal issue, passive probes configured in a failover setup were whitelisted as active probes when acknowledging SSL handshake errors. This issue has now been fixed.
  • Enterprise Edition: In OpManager central, under Probe details page, a new column has been introduced to display the last data processed time of each Probes.

Build No 127117 - June 16, 2023

  • General: Previously, if the SAML authentication had been configured with 'Email ID' as NameID format, the users created with Local authentication could not access the Apps tab, if they had logged in via SAML. This issue has been fixed now.
  • OpManager: In certain instances, the StandAloneToProbe migration failed due to file integrity alarms. This issue has been fixed now.
  • OpManager: The webhook requests failed due to the unnecessary spaces used in the header or custom parameter key values. This has been fixed now.
  • OpManager: Previously, while invoking a webhook, certain issues were faced when the data was sent in JSON format. This has been fixed by escaping the reserved characters.
  • OpManager: Fixed the mistranslation issues in the error messages and changed the UI texts related to SDP OP and ServiceNow.
  • OpManager: Previously, in some cases, the ticket settings were left unchecked, and an error was thrown while saving the SDP OP configuration. This issue has been fixed now.
  • OpManager: The error messages related to SDPOP configuration and notification profiles, have been handled now.
  • OpManager: The ServiceNow CI duplication issue on manual sync, that was faced during certain instances, have been fixed now.
  • OpManager: The UI text has been updated from "Jira ServiceDesk" to "Jira Service Management".
  • OpManager: Introduced support for the Jira Issue related new APIs, that were introduced in Jira Service Management, from versions 9 and above.
  • OpManager: In SDP Cloud, the system description's field value type, has been changed from single line to multi line, to support more than 250 characters.
  • OpManager: Previously in Integrations, even when certain hosts were excluded from the proxy server, proxy was applied to excluded hosts once the OpManager service was restarted. This issue has been fixed now.
  • OpManager: Previously, the notification trigger report was not updated properly for ServiceNow events and incidents. This issue has been fixed now.
  • OpManager: Previously, OpManager was not able to fetch more than 100 records for Notification Profile ticket fields from ServiceDeskPlus Cloud. This issue has been fixed now.
  • OpManager: Previously, OpManager was not able to fetch more than 1000 channels from Slack. This issue has been fixed now.
  • OpManager: Previously, only custom fields were fetched the incident form, and was listed under the notification profile. Now, OpManager will fetch all the fields from ServiceNow.
  • Enterprise Edition: Users can now view OpUtils summary widgets in OpManager Central's dashboard.
  • OpManager MSP: Customer Account mapping and probe site mapping in OPM MSP - SDP MSP integration has now been increased.

Build No 127116 - June 9, 2023

  • General : Previously, from versions 12.5.230 and above, .NET Framework 3.5 was used to remove custom patches/additional folders in the OpManager directory which affected the functionality during/after the upgrade. The .NET Framework 3.5 dependency will not be required for successive upgrades.
  • General : In Dbquery Page, when a single column name was executed, there was an issue in navigating to the next page.This issue has been fixed.
  • General : Previously while receiving Alert notifications via SMS, all the variables were displayed in a single line. This has been fixed now.
  • General: When configuring Virtual IP based failover, if the file 'product.zip' already existed under the OpManager home directory (installation folder), then it should be deleted to create an updated file. However, the delete operation failed when the folder path contained a space which caused the Secondary service startup failure. This has been fixed now.
  • General : Previously, under Audit Report->General-> Devices->Filter, unauthorized devices were listed that are not to be viewed by the Business view user. This has been fixed now.
  • General : There was a problem in exporting user management table data to XLS/CSV format. This has been fixed.
  • General : Previously, a "duplicate email id" error was displayed while adding / editing users in Probe, if the mail id was already used by an user in Central. This issue has been fixed now.
  • Enterprise Edition : In OpManager Probe, after upgrading to version 126322 and above, during user creation, a "license count exceeded" error was displayed, as the user count was taken from both the Central and the Probe. This issue has been fixed now.
  • OpManager Probe : In the user management page, clicking the super admin user's profile, while logged in as a normal admin user has been restricted.
  • NCM : In NCM Probe, during user creation, a "license count exceeded" error was displayed, as the user count was taken from both the Central and the Probe. This issue has been fixed now.

Build No 127109 - July 25, 2023

  • General: Previously, in Failover Settings if email address had been configured, the secondary server would not take over, incase of primary server failure. This issue is applicable for the customers upgraded to versions 12.6.306 or above, and has been fixed now.
  • General: Previously, there was a Cross-site WebSocket hijacking vulnerability, which led to unauthorised access of websocket connection. This has been fixed now by configuring trusted origins. (Reported by CERTXLM. Refer : CVE-2023-29505)
  • General: There was an issue in versions 127100 and above, where the Restore operation failed to copy certain files, if the file's source was located outside of the OpManager directory. This has been fixed now.
  • General: Previously, a "duplicate email id" error was displayed while adding / editing users in Probe, if the mail id was already used by an user in Central. This issue has been fixed now.
  • General: Previously, if the SAML authentication had been configured with 'Email ID' as NameID format, the users created with Local authentication could not access the Apps tab, if they had logged in via SAML. This issue has been fixed now.
  • OpManager: Previously, for agent-monitored devices, agent-related custom parameters were reverted during the upgrade, which led to false alerts for device availability. This issue has been fixed now.
  • OpManager: Previously, the syslogs received from a device, were not being displayed in the syslog viewer. This issue has been fixed now.
  • OpManager EE: Previously, after upgrading to version 126322 or above, users sync from Central to Probe will fail, if multiple domains were configured in the Central ,and if one of those domains were configured in the Probes before the upgrade. This issue has been fixed now.
  • OpManager EE: In OpManager Probe, after upgrading to version 126322 and above, during user creation, a "license count exceeded" error was displayed, as the user count was taken from both the Central and the Probe. This issue has been fixed now.
  • OpManager MSP: Creating a new SNMP trap processor in a Probe selected from the Central server's UI, failed while trying to update the Match Criteria and Rearm Criteria fields. The issues have been fixed now.
  • NCM : In NCM Probe, during user creation, a "license count exceeded" error was displayed, as the user count was taken from both the Central and the Probe. This issue has been fixed now.

Build No 127104 - May 31, 2023

  • General : Previously, there was a Denial of Service (DOS) attack vulnerability in Object deserialization. This has been fixed now. (Reported by Da22le)
  • Enterprise Edition: Introduced an option that allows users to download and install APM plugin to have a smooth integration.
  • Enterprise Edition: From version 126306, Mail server settings could not be synced in a freshly installed probe. This issue has been fixed now.
  • Enterprise Edition: Creating a new SNMP trap processor in a Probe selected from the Central server's UI using the Unified Console option, failed while trying to update the Match Criteria and Rearm Criteria fields. The issues have been fixed now.
  • OpManager : Fixed certain security vulnerability issues related to xmlrpc-client-3.1.3 jar and xmlrpc-common-3.1.3.jar (CVE-2016-5003, CVE-2016-5002, CVE-2016-5004)
  • OpManager : xmlrpc client and common jars have now been upgraded from version 3.1.2 to version 3.1.3 to enhance security.
  • OpManager : Previously, in certain cases, stale Linux/Windows credentials were being associated to devices. This issue has been fixed now.
  • OpManager : Disabled the option to copy files while accessing systems through RDP, to prevent potential security vulnerabilities.
  • OpManager : Previously, when the Applications Manager plugin was inactive, and one or more users were deleted from OpManager, the users will not be deleted from the plugin, when it was restarted. This issue has been fixed now.
  • OpManager : When an AD domain was deleted, all the users of that domain were deleted from OpManager, but not from the Applications manager plugin. This issue has been fixed now.
  • OpManager : Previously, the initial sync between OpManager and Applications manager plugin failed due to database corruption or mismatch issue. This has been fixed now.
  • OpManager : Previously, there was an initial sync issue between OpManager and APM plugin when OpManager's database was disconnected. This issue has been fixed now.
  • OpManager : Previously, when a tab character was present in the instance name, the archived data was not dumped in the Central. This issue has been fixed now.
  • OpManager : Introduced monitoring support for the latest versions of Windows 10 and Windows 11 devices in OpManager.
  • OpManager : Previously, VMWare tag retrieval failed since the connection was established before verifying the host name. This issue has been fixed now.
  • OpManager : Users can now navigate to the device snapshot page, from the device names listed in the VMsprawl dashboard widgets.
  • OpManager : Previously, when the "All virtual machines" reports where filtered based on the vendors, the reports were reset automatically. This issue has been fixed now.
  • OpManager : Optimized the VMware tags custom field updation process, during the VMware rediscovery.
  • OpManager : Previously, there were issues with VMware discovery and rediscovery, while updating certain virtual details. This has been fixed now.
  • OpManager : In certain instances, VMs or hosts with primary IP addresses as v6, were facing issues with being discovered as a virtual server during discovery and rediscovery. This issue has been fixed now.
  • OpManager : During the audit logging for data collection failures, duplicate auditing occurred in few scenarios. This issue has been fixed now.
  • OpManager : Previously, for HyperV host's "disk space usage" (VIWMI) monitor, the units were previously displayed in GB, even though they were measured in KB. This issue has been fixed now.
  • OpManager : Previously, users were not able to select the 'today' criteria in Reports. This issue has been fixed now.
  • OpManager : When navigated to Script Templates page via the Monitoring side tab under Settings, "More Actions" option was missing. This issue has been fixed now.
  • OpManager : Device Availability state details are available in the Device summary widget now.
  • OpManager : Previously, when the UI language was updated, the threshold messages were still being displayed in the default language. This issue has been fixed now.
  • OpManager : Custom Dashboards will now be visible along with the default dashboard tabs.
  • OpManager : When the user navigates from the device snapshot page to the maps page using the "Show on Map" option, upon closing the maps page, they will now be automatically redirected to the respective device snapshot page.
  • General : When the product was accessed via the desktop shortcut, and if SSL was enabled, an error message was shown, requesting the assigned webserver port to be changed. This issue has now been fixed.

Build No 127103 - May 24, 2023

  • General: jQuery UI package has been updated to version 1.13.2, in order to overcome potential vulnerabilities.
  • OpManager: Henceforth, users can update the existing group name from the group snapshot page.
  • OpManager: Henceforth, the "Device up and responding" alarm will also contain the last downtime information.
  • OpManager: During device rediscovery, the values of 'Serial number' custom field were not updated in Central due to an internal issue. This has been fixed now.
  • OpManager: Previously, the alarm in the Group snapshot page were not redirected to the Alarms page. This issue has been fixed now.
  • OpManager: Henceforth, users will be able to add units and numberings when creating/editing a Rack view.
  • OpManager: Previously, if a user configured an Interface group with empty thresholds, it wasn't possible to update the threshold values for the interfaces (of that group) from the Interface snapshot page. This issue has been fixed now.
  • OpManager: The issues in redirection from 3D floor view to device snapshot page and rack page has been fixed now.
  • Enterprise Edition: From 126322 version, the 'Dashboard' page of a Business view wasn't visible in the Central when 'All Probes' filter is chosen. This issue has been fixed now.
  • Enterprise Edition: From 126322 version, the Availability distribution in the Group snapshot page wasn't visible in the Central when 'All Probes' filter is chosen. This issue has been fixed now.
  • OpManager Storage Monitoring: Storage Node Status monitor has been newly added to the device template of EMC Isilon Storage device model.
  • OpManager Storage Monitoring: For capacity monitors associated to RAID protocol, incorrect polling time was shown when the credential authentication failed. This issue has been fixed now.
  • OpManager Storage Monitoring: A spike in CPU usage was noticed after associating throughput monitors to Huawei storage devices. This issue has been fixed now.

Build No 127102 - May 18, 2023

  • General : Earlier, PostgreSQL database read only user faced a permission issue in accessing newly created tables. The issue has been fixed.
  • General : After upgrading to version 127100, there was an issue in enabling SSL with a self-signed certificate if it was enabled for the first time via OpManager UI. This issue has now been fixed.
  • NCM : Now, post operations are available in Network Configuration Manager device snapshot page in OpManager Enterprise Edition central.
    • ​

Build No 127101 - May 11, 2023

  • OpManager: With the Perf Group option, performance monitors can now be categorized into a group and used for generating Advanced reports.

Build No 127100 - May 05, 2023

  • General: MomentJS has been upgraded to version 2_29_4 and Moment-Timezone has been upgraded to version 0_5_40.
  • General: Sometimes, when a widget's embed code is rendered inside a Custom HTML widget, it might fail to load in Noc View. This issue has been fixed now.
  • General: Previously in Virtual IP based failover, when the primary server's DB disconnected, the secondary server tried to take over as the master server and failed, since the Virtual IP was already bound to the primary server. This has now been fixed.
  • General: The set of allowed special characters for password complexity was different when creating a user account. The issue has now been fixed.
  • General: Previously when you delete the last selected group configured for AD auto-login, the domain details and the associated user accounts will also be deleted. This issue has been fixed now.
  • General: Previously, SAML users faced 'Invalid referenceID error' in the login page when they accessed OpManager login page with the FQDN of the server. This issue has been fixed now.
  • General: When the certificate nears its expiry date (less than 15 days), we'll regenerate the certificate when the user clicks on the self-signed certificate option in the UI.
  • General: From now, NOC view will only be displayed if the user has access to at least one dashboard in the NOC view.
  • General: During AD group auto-login, the primary group of the user was not fetched if the group was not found under the provided BaseDN . Now as a fallback, OpManager will look under the 'CN=Users' container to fetch the primary group.
  • General: When the user account of a shared dashboard owner is deleted, there was an issue when updating the dashboard details. This has been fixed now.
  • General: During AD group auto-login, the group names matching will not be case sensitive now.
  • OpManager: The Notification Profiles now features a new section for 'Applications', to list all the actions from the Applications Manager plugin.
  • OpManager: While associating devices under Add/edit Notification Profiles, sometimes searching for a specific device name might be slow when a lot of results show up. This has been fixed now.
  • OpManager: In the past, there was an issue when OpManager essential edition license was applied to standalone products such as NCM, NFA, FWA, OpUtils. This has now been fixed.
  • OpManager: The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on July 23, 2023.

Build No 127007 - September 25, 2024

  • General: Previously, Upgrade failures were caused by Firewall Analyzer table corruption and missing tables in the database. This issue has now been resolved.

Build No 127006 - March 18, 2024

  • General: Previously, there was a delay in file access verification during upgrade. This has been resolved now.
  • General: Previously, in certain Central setups, there were issues with applying the PPM due to a stale table entry in the database. This has now been fixed.

Build No 127005 - February 8, 2024

  • Enterprise Edition : A discrepancy in status led to the display of an incorrect banner message on the smart upgrade page if the manual upgrade was done after initiating the new smart upgrade. This issue has now been fixed.
  • Enterprise Edition : In Linux builds, the pre-check for the upgrade failed if the root user directory had less than 5GB of space, as the disk free space was calculated for the root user directory instead of the Opmanager installed directory. This issue has now been fixed.
  • Enterprise Edition : Previously, the PPM download was not initiated again in smart upgrade if the previous attempt had failed due to network interruption on their end. This issue has now been fixed.
  • Enterprise Edition : Previously, the PPM download was not initiated, after freeing up disk space and restarting the probe. This issue has now been fixed.
  • Enterprise Edition : Previously, when the probe was restarted after uploading the PPM, the PPM got deleted if the certificate was not downloaded already. This issue has now been fixed.

Build No 127004 - September 29, 2023

  • OpManager: For OpManager versions 126262 and above, there were few issues with the VMware discovery or rediscovery processes, due to SSL handling. This has been fixed now.

Build No 127003 - August 04, 2023

  • General: HighPerf(CStore) data migration support is has been made available for customers with builds 12.6 to 12.7 builds.
  • General: Previously, in Failover Settings if email address had been configured, the secondary server would not take over, incase of primary server failure. This issue is applicable for the customers upgraded to versions 12.6.306 or above, and has been fixed now.
  • OpManager EE: Previously, after upgrading to version 126322 or above, users sync from Central to Probe will fail, if multiple domains were configured in the Central, and if one of those domains were configured in the Probes before the upgrade. This issue has been fixed now.
  • OpManager: There was an issue in upgrading PPM from version older than 12200 to the latest version. This issue has now been fixed.
  • NetFlow: Support ID - 8665195, 8807013: Upgrade failure that occurred NetFlow Tables in MSSQL DB were not defined properly has now been fixed.

Build No 127002 - June 01, 2023

  • General : Earlier, PostgreSQL database read only user faced a permission issue in accessing newly created tables. The issue has been fixed.

Build No 127001 - May 10, 2023

  • General : Previously, there was a slowness during upgrade. This issue has now been fixed.
  • OpManager : The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on July 23, 2023.
  • OpUtils : Previously, under Switch Port Mapper, users faced an issue where the switch scan status failed when adding a new switch. This has now been fixed.
  • OpUtils : Previously, under IP Address Manager Dashboard, users were not able to load IP availability heatmap widget. This issue has now been fixed.
  • Firewall: In Enterprise Central Server, Widgets were not loaded under Dashboard due to issue. This issue has been fixed.

Build No 127000 - April 26, 2023

  • General : PostgreSQL version has been upgraded to 14.7. The PostgreSQL vulnerability issues from version 10.21 have been fixed now.
  • General : JRE version 1.8.0_362 will be used in fresh installations(exe / bin).
  • General : Earlier, from version 12.5.415 there was an issue in "Remember Me". This has now been fixed.
  • General : Tomcat, Wrapper, PostgreSQL JDBC driver, MSSQL JDBC driver, openpdf and various product-specific components have been updated.
  • NetFlow : One-click enable option has been provided for HighPerf(CStore).
  • NetFlow : HighPerf has been upgraded to the latest version with CStore 4.0.7
  • Enterprise Edition : PPM Upgrade failure in OpManager probe with remote PostgreSQL database from versions older than 126275 to latest, has been fixed.
  • Enterprise Edition : From version 12.6.322, if the central and probe server OS languages were different, and when the probe was accessed from the Central UI, there were issues in translation. This issue has been fixed now.
  • Enterprise Edition : From version 12.5.000, when the Central server was installed using Remote PostgreSQL DB, there was an issue in migrating OpManager Essential to Enterprise. This has been fixed now.

Build No 126329 - June 21, 2023

  • Firewall: Support ID: 8747495 - Proxy server settings has been added now in General settings.
  • Firewall: Support ID: 8664950 - The import of Protocol group files failed when the file size was greater than 50 KB. This issue has been fixed now.
  • Firewall: Support ID: 5982896 - The Hourly and Weekly trend comparison graphs of the 'Traffic Trend Report,' 'Event Trend Report,' and 'Protocol Trend Report' were not displaying the data in the correct order. This issue has been fixed now.
  • Firewall: Support ID: 8828880 - The export of XLS report in the Expiry notification failed. This issue has been fixed now.
  • Firewall: Exporting the raw logs report in the Raw search custom report failed. This issue has been fixed now.
  • OpManager: Previously, there were issues in scheduling downtime for URL monitors. This has been fixed now.

Build No 126328 - June 2, 2023

  • Enterprise Edition: Creating a new SNMP trap processor in a Probe selected from the Central server's UI using the Unified Console option, failed while trying to update the Match Criteria and Rearm Criteria fields. The issues have been fixed now.

Build No 126324 - April 19, 2023

  • OpManager : Introduced an option to configure ServiceNow custom fields in Notification profile, to create Servicenow incidents for OpManager alerts.
  • OpManager : Previously, in ServiceDesk Plus Cloud, when the entity size was too big, there were certain issues faced while updating the request. This has been fixed now.
  • OpManager : Users can now sync domain controller servers from OpManager to ServiceDesk Plus OP.
  • OpManager : In ServiceDesk Plus Cloud, fixed the issues faced while updating the request notes, when the request status was not closed.
  • OpManager : To avoid slowness in the Interface Templates association page, users will henceforth be able to choose a maximum of 1000 interfaces at once.
  • OpManager : Previously, there was slowness observed in the Groups list view page when more groups were added. This has been optimized now.
  • OpManager : Henceforth, users will be able to add a maximum of 2000 elements to a group from the Inventory page.
  • OpManager : Previously, there was an issue while downloading a scheduled report. This has been fixed now.
  • OpManager : Previously, during Cisco ACI discovery, the corresponding Tenants and Endpoint Groups were not discovered. This has been fixed now.
  • Enterprise Edition : Discovery Rule Engine is now supported in OpManager Central. Users can now 'Add Device to Business View' and 'Associate Notification Profile' in Central server.
  • Enterprise Edition : Remote code execution vulnerability was identified during the data transfer in the Enterprise Edition. This has been fixed now. (Refer: CVE-2023-31099)
  • Enterprise Edition : Due to improper termination of the SSL certificate verification process in some cases, there was a sudden spike in CPU usage. This issue has been fixed now.

Build No 126323 - April 12, 2023

  • OpManager: Previously, there was an out of memory error while carrying out archiving-related operations. This issue has been fixed now.
  • OpManager: Previously, in certain instances, when processes with arguments length more than 1000 were added, the processes were shown to be in down state. This issue has been fixed now.
  • OpManager: Previously, when devices were associated with stale WMI/CLI credentials, false credential alerts were being raised. This issue has been fixed now.
  • OpManager: For Japanese versions, the script monitor's threshold status "Normal" was not being displayed properly under the monitors tab of the device snapshot page. This issue has been fixed now.
  • OpManager: Previously, when a WMI monitor was in the scheduler queue, the test monitor action did not work. This issue has been fixed now.
  • OpManager: Previously, while deleting agent from the UI, agent entries were not being removed when the agent was in non-communication state. This issue has been fixed now.
  • OpManager: During OpManagerAgent Installation, in some cases, the installed agent device was mistakenly mapped with an already existing different device, instead of adding it as a new device. This issue has been fixed now.
  • OpManager: The performance scalability of agent request process, while updating monitors to all agents in bulk, has been enhanced now, even when a large number of agents has been installed.
  • OpManager: OpManager : Previously, in the match content section of URL, users were not able to give double quotes as the double-quoted strings were considered as a single string. This issue has been fixed now by introducing "\" as an escape character.
  • OpManager: Previously, when accessed with HTTP, users were not able to access Applications manager plugin in OpManager Central. This issue has been fixed now.
  • OpManager: If the URL was added using the "Import via CSV" option, users were not able to edit the URLs from their respective snapshot pages. This issue has been fixed now.
  • OpManager: Previously, partial data was being displayed in the real-Time graph of a SNMP Multiple type monitor with an OID expression, when the denominator OID value for some instances returned as zero. This issue has been fixed now.
  • OpManager: In OpManager central under the HyperV host snapshot page, newly discovered VMs were not listed under the Virtual machines tab, and for those discovered HyperV VMs, details were not being shown under the VM Info tab. This issue has been fixed now.
  • OpManager: When a virtual parent device has been unmanaged, and the corresponding child entities have been unmanaged and managed, virtual monitors of the child entities are shown as disabled under DCM, when the parent device is managed back. This issue has been fixed now.
  • OpManager: Previously, when more than one filter was being applied, URLs were not being listed under the "Servers -> URL" subtab. This issue has been fixed now.
  • OpManager: The forecasted value of CPU Utilization and Memory Utilization monitors in Adaptive Thresholds was exceeding 100 in few cases, this has been fixed now.
  • OpManager: Forecast trend report related time filters were shown for other reports. This is fixed now.
  • OpManager: From OpManager versions 126151, data collection was not happening properly for agent-monitored devices, due to certain issues faced while validating data files. This has been fixed now.
  • General: jqGrid has been updated to version 5.7.0, in order to overcome potential vulnerabilities.
  • OpManager: Previously, the alerts raised when script monitors were down, were not being cleared properly. This issue has been fixed now.
  • OpManager: Introduced an option that allows users to export the snapshot graphs, in the form of PDFs.
  • OpManager: Previously in certain instances during VMware rediscovery, few VMs were not being fetched due to SSLHandshakeException, which lead them to be moved under "OPM-DEVICE". This issue has been fixed now.

Build No 126315 - May 24, 2023

  • OpManager : Introduced monitoring support for the latest versions of Windows 10 and Windows 11 devices in OpManager.

Build No 126322 - April 05, 2023

  • Enterprise Edition : From now, users created in the Central can be synced across the Probes.
  • Enterprise Edition : A Probe drop down option has been introduced in the Central's UI to select and view a particular Probe's UI from the Central.
  • Enterprise Edition : By enabling the Centralized Configuration option, common configuration changes such as Mail server, SMS server, Rebranding and Proxy server settings made in the Central will be synced with all the Probes.
  • Enterprise Edition : A new option called LiteCentral has been introduced in the Central server's UI to support scalability when more than 5000 devices are required to be monitored.
  • Enterprise Edition : On-demand report generation will be supported in the Central when the LiteCentral option is enabled. A report can be scheduled in the Central, the data will be fetched from the respective Probe and displayed in the Central.
  • Enterprise Edition : To enhance security and to maintain user scope, an additional user authentication layer has been introduced.
  • Enterprise Edition : The webpage loading speed in the client server has been optimized for better end-user experience.
  • Enterprise Edition : Queries with slow responses have been identified and optimized.
  • Enterprise Edition : When OpManager Essential edition is migrated to a Probe server, the associated user details in the Essential edition will be maintained in the Probe also.
  • Enterprise Edition : APM plugin user details from the Central will be synced across the Probes.
  • Enterprise Edition : A new section called Enterprise Settings has been introduced under System Settings.
  • Enterprise Edition : Previously, if the connection between a Probe and the Central is not established, the Probe will shutdown in 15 days. Now, it will shutdown in 7 days and emails will be triggered to notify the user.

Build No 126311 - March 31, 2023

  • General: In build versions from 126151, there was an issue while executing commands in Run System Command & Run Program notification profiles. This has now been fixed.
  • OpManager: Henceforth, the custom fields widget under Device and Interface snapshot pages will display only the fields with values.
  • OpManager: Around 83 device templates and 19 SNMP monitors have been newly added for a wider support of device models during device discovery.
  • OpManager: Device Templates and monitors that were previously mapped to duplicate vendor names have now been unified. The templates and monitors mapped to Fortinet Inc. and Fortigate vendor names are now unifed as 'Fortinet'. Similarly, Arista as 'Arista Networks', F5 Networks Inc. as 'F5 Networks' and CyberPower System as 'CyberPower'.
  • OpManager: Device templates having SysOID that starts with .1.3.6.1.4.1.10734, will henceforth be classified as Trend Micro.
  • OpManager: Previously, the devices under Juniper SRX 4100, Juniper SRX 4200 and Juniper SRX 4600 device types were incorrectly categorized as Switch instead of Firewall. This issue has been fixed now.
  • OpManager: Two-byte character support has been added for the group name parameter across multiple APIs.
  • OpManager: A widget for Network Path Analysis has newly been added. It is now available among the list of General Widgets.
  • OpManager: The minimum polling interval for monitoring a network path, has now been reduced from 10 minutes to 5 minutes.
  • OpUtils : Previously, under IP Address Manager, there was an issue with sorting Custom Column values. This has now been fixed.
  • OpUtils : During IP subnet details import via CSV files, OpUtils automatically removes the restricted special characters in the imported data fields.
  • OpUtils : Previously, there was an issue while exporting IPAM, Switch Port Mapper and Rogue Detection module data from OpManager central. This issue has now been fixed.
  • OpUtils : Previously, users faced an issue with adding switches using SNMP v1 credentials. This issue has now been fixed.
  • OpUtils : Previously, on using global search to identify a subnet, there was an issue with accessing its associated IP snapshot page. This issue has now been fixed.
  • OpUtils : Previously, under Switch Port Mapper's Port History tab, there was an issue with exporting the tracked data. This issue has now been fixed.
  • OpUtils : Under Switch Port Mapper's Port View, users can now configure up to 52 ports.

Build No 126310 - March 24, 2023

  • General: For improved security, customers can now enable/disable weak ciphers and weak TLS versions in the GUI itself.
  • OpManager: There was an issue in sending recurring Notification mails from certain Profiles configured for a device, because the alarm got cleared before delay schedule. This issue has been fixed.

Build No 126308 - March 15, 2023

  • OpManager: Microsoft Teams integration - Users can now integrate OpManager with Microsoft Teams via OAuth provider, and send alerts to the concerned Channel in Teams.

Build No 126306 - March 13, 2023

  • General: Introducing OAuth authentication support in Mail Server Settings for Google & Microsoft.
  • General: If Virtual IP based failover model has been configured, when the central is down, the slave probe will try to fetch the license from the master probe.
  • OpManager: While emailing or scheduling a report, restricted special characters used in message and subject fields will now be indicated on the product UI.
  • OpManager: When an advanced report is exported in XLS format, there was an empty row seen between the header row containing the fields and the row containing data. This has been fixed now.
  • OpManager: The time range in minutes for Integrated reports scheduled weekly and monthly will appear from 0 to 60 in multiples of 5.
  • OpManager: Special characters in scheduled reports URL has been encoded now for all languages.
  • OpManager: For MSSQL versions older than 2012, fetching data for advanced reports failed. This issue has been fixed.
  • OpManager: Previously, users were unable to add the RCA name, description and annotation in languages other than English. This issue has been fixed.
  • OpManager: Certain untranslated texts found in the RCA feature has been translated now.
  • OpManager: Previously, 3D Floor View and Rack View widgets failed to fetch data. This issue has been fixed now.
  • OpManager: In the license expiry page, after deleting multiple users, only OpManager users were deleted and Applications Manager plugin users were not. This issue has now been fixed.
  • OpManager: Previously, initial sync failure occurred when Applications Manager plugin professional edition was installed in OpManager Enterprise edition. This has been fixed now.
  • OpManager: Previously, the OpManagerAgent stopped working when an empty IP address list returned from the monitored device. This issue has been fixed now.
  • OpManager MSP: Introducing Customer based license allocation model, using which the License elements can now be allocated on a per customer basis.
  • OpManager Storage Monitoring: Previously, fetching data of node monitors failed for NetApp ONTAP storage device model. This issue has been fixed now.
  • OpManager Storage Monitoring: Previously, discovery failed for Huawei devices in certain cases. This issue has been fixed now.
  • OpManager Storage Monitoring: There was an issue while discovering Dell EMC VNX-BLOCK device model when security mechanism was enabled in NaviCLI. This issue has been fixed now.

Build No 126300 - May 04, 2023

  • Enterprise Edition : Remote code execution vulnerability was identified during the data transfer in the Enterprise Edition. This has been fixed now.
  • Enterprise Edition : Due to improper termination of the SSL certificate verification process in some cases, there was a sudden spike in CPU usage. This issue has been fixed now.
  • OpManager : Previously, during Cisco ACI discovery, the corresponding Tenants and Endpoint Groups were not discovered. This has been fixed now.

Build No 126299 - April 20, 2023

  • OpManager: Previously in certain instances during VMware rediscovery, few VMs were not being fetched due to SSLHandshakeException, which lead them to be moved under "OPM-DEVICE". This issue has been fixed now.

Build No 126295 - March 03, 2023

  • OpManager: WLC Monitoring is now supported for H3C WX3520H, WX5540H and Ruijie WS6008 device.
  • OpManager: The maximum ping packet count has now been restricted to 4, to optimize scalability in availability monitoring.
  • OpManager: The XSS vulnerabilities identified in the Business View and Inventory pages have now been fixed.
  • OpManager: Restriction of device synchronization from the add-on modules has now been enabled by default.
  • OpManager: Previously, the sub-interfaces weren't added when discovering interfaces from the device snapshot page. This has now been fixed.
  • OpManager: Previously, there were issues in plotting the stack topology map in the Switch Stack snapshot page. This has now been fixed.
  • OpManager: The XSS vulnerabilities identified in the Business View Summary widget have now been fixed.
  • OpManager: Previously, when HyperV-VM had multiple memory instances, wrong value was being displayed for the memory under the VM info tab. This issue has been fixed now.
  • OpManager: Previously, for nutanix virtual machines, under the virtual machines tab, the virtual disk capacity was being displayed in MB instead of GB. This issue has been fixed now.
  • OpManager: Previously, even when adaptive thresholds were disabled and manual thresholds were enabled in device templates bulk edit threshold page, the alarm message will be displayed as adaptive thresholds-related alarm. This issue has been fixed now.
  • OpManager: Previously, the RowCount functional expression was not working for String type OIDs. This issue has been fixed now.
  • OpManager: Enhanced the DCOM authentication level to Packet Privacy for device WMI communication.
  • OpManager: For Japanese versions, there were issues with exporting the XLS URL response time report. This has been fixed now.
  • OpManager: Previously, the "Test URL" option under device specific URL's alarms page was not working properly. This issue has been fixed now.
  • OpManager: Previously, the groups were not sorted properly when 'Group by Groups' filter was chosen in the Tree view pane under the Inventory tab. This issue has been fixed now.
  • OpManager: Previously, when an alarm of an unmanaged URL was cleared, the URL status was changed to clear, instead of unknown/unmanaged. This issue has been fixed now.
  • OpManager: Previously, there was slowness identified in the Dashboard when configuring group filter in the 'Top-N Least Available' and 'Servers Top-N Least Availability' SLA widgets. This has been fixed now.
  • OpManager MSP: Previously, it wasn't possible to save the interfaces rediscovered from the device snapshot page because of an internal issue. This has been fixed now.

Build No 126294 - February 28, 2023

  • Enterprise Edition: To update the details of the proxy server used for communication in the Enterprise Edition, an option has been introduced in the product UI.

Build No 126293 - February 23, 2023

  • General: If SAML authentication has been configured in MSSQL installations, there was an issue in restoring the backup data if the setup was upgraded from 125597 or below. This has now been fixed.
  • General: Previously, the syslog forwarder was sending garbled characters if non-English characters had been forwarded. This has now been fixed.
  • OpManager: Previously, the syslog flow rate was always shown as 0, even if multiple syslogs were being processed. This has now been fixed.
  • OpManager MSP: A Probe's display name can be changed now. Multiple probes can have the same display name, if they are under different customers.

Build No 126290 - February 10, 2023

  • OpManager Storage Monitoring: Storage monitoring support has been extended to Tegile Intelliflash device model.
  • OpManager: OpUtils actions including remote port blocking and wake on LAN capability have been added to Workflow.

Build No 126288 - June 06, 2023

  • Enterprise Edition: Remote code execution vulnerability was identified during the data transfer in the Enterprise Edition. This has been fixed now.
  • Enterprise Edition: PPM Upgrade failure in OpManager probe with remote PostgreSQL database from versions older than 126275 to latest, has been fixed
  • OpManager: Previously in OpManager versions 126110 and below, when users schedule reports for partition monitors, data was being fetched for all the partition monitors instead of just the scheduled ones. This issue has been fixed now.
  • OpManager: Enhanced the DCOM authentication level to Packet Privacy for device WMI communication.
  • OpManager: Previously, when accessed with HTTP, users were not able to access Applications manager plugin in OpManager Central. This issue has been fixed now. 
  • OpManager: The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on July 23, 2023. 
  • OpManager: Previously, users were unable to add the RCA name, description and annotation in languages other than English. This issue has been fixed.
  • OpManager: Certain untranslated texts found in the RCA feature has been translated now.
  • OpManager: Previously, in uplink dependency, a child device would be polled despite the parent device being down. This issue has been fixed now.
  • OpManager: In the Advanced Reports page, under Interface module reports, the units will now be shown in Kbps, Mbps, and Gbps, depending on the values for Interface Tx Traffic (bps), Interface Rx Traffic (bps), and Total Traffic (bps) monitors.
  • NetFlow: There was an issue in showing the devices associated for non-admin users after upgrading to 126275 version. This has been fixed.
  • NetFlow: Previously there were failed attempts when upgrading PPM due to improperly updated NetFlow tables. This issue is resolved now
  • NCM: Earlier, there was an issue while sending firmware vulnerability report through mail. This issue has been fixed now. 
  • NCM: Earlier, there was an issue while exporting Device Audit report in CSV format. This issue has been fixed now.
  • NCM: Earlier, there was an issue in Startup-Running Conflict report in 'Last Operation Status' column while exporting in Japanese. This issue has been fixed now.
  • NCM: Earlier, there was an issue in last modified time in CSV and XLS formats of the Backup Status Report in Japanese language. This issue has been fixed now.
  • NCM: Earlier, backup failure status was translated incorrectly in Japanese language. This issue has been fixed now.

Build No 126287 - May 18, 2023

  • Enterprise Edition : Due to improper termination of the SSL certificate verification process in some cases, there was a sudden spike in CPU usage. This issue has been fixed now.
  • Enterprise Edition : Previously, when importing custom field values via CSV, the field values of stale devices in a probe were also pushed to the Central. This issue has been fixed now.
  • Enterprise Edition : During device rediscovery, the value of 'Serial number' custom field were not updated in Central due to an internal issue. This has been fixed now.
  • OpManager : Previously, there were issue in restoring the OpManager backup when there are more than 20 custom fields associated to the device. This issue has been fixed now.
  • OpManager : Previously, during Cisco ACI discovery, the corresponding Tenants and Endpoint Groups were not discovered. This has been fixed now.

Build No 126286 - April 06, 2023

  • OpManager : From OpManager versions 126151, data collection was not happening properly for agent-monitored devices, due to certain issues faced while validating data files. This has been fixed now.
  • OpManager : Previously, the alerts raised when script monitors were down, were not being cleared properly. This issue has been fixed now.

Build No 126285 - March 27, 2023

  • General: In build versions from 126151, there was an issue while executing commands in Run System Command & Run Program notification profiles/templates. This has now been fixed.

Build No 126284 - March 25, 2023

  • General: Initially, there was a browser crash issue while accessing demo video urls from https-enabled Netflow Analyzer and Network Configuration Manager. This issue has been fixed now.

Build No 126283 - March 21, 2023

  • Firewall : Support ID: 7289486 - Export to 'XLS' option has been provided for 'Configuration Comparison Report'.
  • Firewall : Few I18N keys were missing, when 'Rule Suggestion Report' was exported to 'XLS' or 'CSV'. This issue has been fixed.
  • Firewall : PDF on demand and mail export options were not working, if both HTTP and HTTPS were enabled on a server. This issue has been fixed.

Build No 126280 - February 9, 2023

  • General: If SAML authentication has been configured in MSSQL installations, there was an issue in restoring the backup data when the base build version is 125597 or below. This has now been fixed.

Build No 126279 - February 03, 2023

  • OpManager: Previously, when exporting the IPSLA list view (under Network tab) using export as CSV option, the 'Path' column was missing in the CSV file. This issue has been fixed now.
  • OpManager: Previously, there were issues in deletion of business views from the list view under the Maps tab. This has now been fixed.
  • OpManager: The XSS vulnerabilities identified with the custom links in various pages, have now been fixed.
  • OpManager: In the Advanced Reports page, under Interface module reports, the units will now be shown in Kbps, Mbps, and Gbps, depending on the values for Interface Tx Traffic (bps), Interface Rx Traffic (bps), and Total Traffic (bps) monitors.

Build No 126278 - January 31, 2023

  • General: For enhanced security, SSL will be enabled by default with a self signed certificate in all the editions during installation. Administrator users can update the SSL certificate under Settings -> Security settings option.
  • General: For enhanced security, SSL will be recommended to be enabled after the upgrade. Users can skip this notification for 2 weeks, after which the recommendation will be displayed again.
  • General: Previously, when recommendation was displayed to change the default super admin password, TFA was also recommended even if it had been disabled or had been skipped in the last 14 days. This issue has been fixed now.
  • General: Previously, updating both protocol and port in the OpManager server UI will not reflect the protocol changes. This issue has now been fixed.
  • OpManager MSP: Probe key file details are not shown in the Probe details page, if there are more than 50 probes. This issue has been fixed now.

Build No 126277 - January 24, 2023

  • OpManager : While selecting MIBs under Trap Settings, it was noticed that the previously selected MIBs were not saved. This issue has been fixed now.
  • OpManager : Previously, when the URL debug was enabled, sensitive information of few APIs were being logged. This issue has been fixed now, to prevent sensitive data exposure.
  • OpManager : Description of datastore-related monitors have now been updated to convey that they will be supported only for non-vsan datastores.
  • OpManager : SNMP based Availability monitoring failed for devices from 126262 version due to an internal issue. This has been fixed now.
  • OpManager : Trap Processors listed under Load from MIBs option were not updated even after the MIB file was modified. This has been fixed now.
  • OpManager : There was an issue in accessing the device snapshot page of storage devices that contains special characters. This issue has been fixed now.
  • OpManager : Probe name and Customer name has now been included in the email subject of Data Collection Manager Diagnostic report.
  • OpManager : Optimised the widget loading performance for certain widgets.
  • OpManager : The Stored XSS vulnerability issues leading to JS injection, that were identified in the URL Monitors, have been fixed now. (Reported by Ranjit Pahan)
  • Enterprise Edition : When unprocessed archived files are found in the OpManager folder, it will be notified to the user via an email and an alert.
  • Enterprise Edition : The upgrade status of the Probes was not marked completed when a user followed the manual upgrade procedure after uploading the PPM files. This issue has been fixed now.

Build No 126276 - January 19, 2023

  • OpManager : Security enhancements have been done for ServiceNow integration's two way sync.
  • OpManager : Previously, only a maximum of 100 technician groups were fetched from SDP Cloud. This has been fixed now.
  • OpManager : Previously, the "Message Key" value was not populated properly for ServiceNow events. This issue has been fixed now.
  • OpManager : Previously, updating one asset details affected the remaining assets too. This issue has been fixed now.
  • OpManager : Audit logs will now be added for all critical operations that were carried out doing third party integrations.

Build No 126275 - January 12, 2023

  • Enterprise Edition: OpManager Enterprise Edition customers who are using the NetFlow/Firewall addon(s) will now be able to view Probe server's NetFlow/Firewall Inventory data in the Central server under Network -> Flow Analysis/Firewall Log Analysis tab.

Build No 126264 - February 22, 2023

  • OpManager : SNMP based Availability monitoring failed for devices from 126262 version due to an internal issue. This has been fixed now.
  • OpManager : The XSS vulnerabilities identified with the custom links in various pages, have now been fixed.

Build No 126262 - January 4, 2023

  • General: The visualization library 'vis.js' has been upgraded to 9.1.3 version.
  • General: Notification Profile/template related critical operations such as add, update and test will now be carried out with OTP authentication if TFA has been enabled.
  • General: setEnv.bat failed File Integrity scanning after performing the DB Configuration using DBConfiguration.bat. This issue has now been fixed.
  • OpManager: Previously, users encountered issues while syncing CI fields from OpManager to SDP cloud. This has been fixed now.
  • OpManager: Around 79 device templates and 41 SNMP monitors have been newly added for a wider support of device models during device discovery.
  • OpManager: Previously, a few SNMP monitors displayed inappropriate data due to incorrect OID expression, unit or graph name. This issue has been fixed now.
  • OpManager: Switch Stack monitoring is now supported for 'Cisco 9500 Fixed Switch Stack' switches as well.
  • OpManager: Previously, during network discovery using CSV import, column headers in Japanese were displayed as garbled text. This issue has been fixed for the Japanese installation now.
  • OpManager: Previously, the racks in a Business view were not redirected to the rack snapshot page. This issue has been fixed now.
  • OpManager: Previously, the alarms that appear upon hovering the business view shortcut were not redirected to the respective alarm page. This issue has been fixed now.
  • OpManager: Previously, there were issues in fetching the device list in the Inventory, Network and Server tabs when multiple vendors were selected from the filters under Donut view. This issue has been fixed now.
  • OpManager: In the Japanese installations, there were issue in updating the custom field values if the imported CSV file contains field name in English text. This issue has been fixed now.
  • OpManager: Previously, the distribution chart from the Device Availability Dashboard report had discrepancies while generating 24 hour data after the 28th of a month. This issue has now been fixed.
  • OpManager: The XSS vulnerability issues identified in the Meraki & IPSLA pages have been fixed now.
  • OpManager: Previously, there were issues while associating device template to a number of devices in bulk. This issue has been fixed now.
  • OpManager: Disabled the "Time Window" option under the Schedule reports page of Interface graphs and Device Availability, Packet Loss and Response Time graphs.
  • OpManager: Previously, when users open a interface snapshot page from a device snapshot page, they were not able to navigate to the snapshot page of the subsequent interface. This issue has been fixed now.
  • OpManager: Previously, for interface widgets created using Interface Report Builder, the same parent name was displayed in the tooltip. This has now been fixed by introducing their respective parent names.
  • Enterprise Edition: Previously, custom field values updated in the Probe for devices or interfaces wasn't pushed to the Central due to an internal issue. This issue has been fixed now.
  • OpManager: Previously, there was an XML External Entity (XXE) vulnerability in UCS module. It has been fixed now. (Reported by Cisco Talos-Marcin Nago. Refer: CVE-2022-43473)
  • OpManager: For Agent-Monitored Devices, there was an Issue in Agent communication due to the mismatch of actual hostname in SSL certificate. This has been fixed now.
  • OpManager: For log file monitors, apart from string identification, users will now also be able to view the occurrence count of search string in the Alarm Message.
  • OpManager: Previously, agent-related files were reported in file Integrity scanning. This issue has been fixed now.
  • OpManager: Previously, users were not able to fetch report for data stores by using the "generate report" option under the "inventory" tab. This has been fixed now.
  • OpManager: In some cases, the script files that were created temporarily during data collection were not being deleted when the product shutdown abruptly. This has been fixed now.
  • OpManager: Even when adaptive threshold settings were disabled globally, they were still being associated to virtual devices. This has been fixed now.
  • OpManager: Previously, an incorrect message was triggered when Test Script was executed on a Linux device with improper credential configuration. This issue has been fixed now.
  • OpManager: The total alarm count displayed under the AD/ Exchange tab in the device summary page, was not reduced when alarms were cleared. This issue has been fixed.
  • OpManager: Previously, unwanted hardware alerts were raised for standby state of Juniper devices. This has been fixed now.
  • OpManager: Under the device snapshot page, the "Installed Softwares" tab has been renamed to "Installed Software".
  • OpManager: Introduced support for basic Latin special characters in URL Name.
  • OpManager: The info messages for managing and unmanaging URLs have now been translated accordingly.
  • OpManager: Previously, for certain cases, users were not able to update the "Top N monitored values of a performance monitor" widget. This issue has been fixed now.
  • OpManager: Previously, when any one of the instances in a multiple type monitor had a divide by 0 error, the monitor polling will be disabled via DCM. This issue has been fixed now.
  • OpManager: When hardware monitoring was disabled under the Monitors settings page, the Hardware information widget data was empty for the newly discovered IPMI SNMP devices. This issue has been fixed now.
  • OpManager: When incorrect SNMP credentials were used along with right one, the IPMI SNMP discovery was not happening. This issue has been fixed now.
  • OpManager: Previously, read privilege dashboard users were not able to collect data for dashboard widgets linked to real-time categories. This has been fixed now.
  • OpManager: Previously in some cases, when LUN serial number length exceeded 100 characters, VMWare discovery failed. This issue has been fixed now.
  • Enterprise Edition : Introduced a "Data Comparison" tab, under the "Diagnostics Support" page of OpManager Central, that helps users identify the data sync issues between the probes and central setups.
  • General : Earlier, there was an issue in adding and editing domains in version 126258. This issue has been fixed now.
  • OpManager: Introduced an option to enable/ disable asset settings for SDP cloud configuration.
  • OpManager: Minor usability enhancements have been done to File integrity monitoring
  • OpManager: The monitors tab in APM plugin will now be displayed by default, when users click on the applications tab.
  • OpManager: From now, when a scheduled report is generated, a user can view only the report data that is within the scope of the configured user role
  • OpManager: Introduced a feature that allows users to forecast the trends for performance monitors, interface, and datastore graphs, from the device snapshot page.
  • OpManager: Introduced exclusive reports for forecasting the trends of any performance monitor.
  • OpManager: Added a forecasting trend widget, that helps users visualise the trends of their desired performance monitor.
  • NetFlow: Introducing NetSpeed Tracker to track historical internet speed.
  • NetFlow: There was an issue where unmanaged interfaces were also listed under Inventory > AS view. This has been fixed now.
  • NCM: Now, Network Configuration Manager supports configuration file backup in tgz format.
  • NCM: Network Configuration Manager now supports TP-Link Gigabit Switch, Cisco Firepower Threat Defense, MiMOMax-BRU-T, MiMOMax-RRU-T, MiMOMax-BRU-P, and MiMOMax-RRU-P models by default.
  • NCM: Earlier, there was an issue in adding bulk devices and because of this there was an issue in the distribution of devices. This has been fixed now.
  • NCM: Earlier, there was an issue in creating a device group from the inventory of role-based users and operators. This has been fixed now.
  • NCM: Earlier, there was an issue in running a credential rule for bulk devices via "Run Rule Through" option. This has been fixed now.
  • General: Users were unable to return to the NOC view window when a device snapshot page was opened from the NOC view screen. This has been fixed now.
  • OpManager: Migration to OpManager Enterprise edition is now possible only from Standard/Professional or Lite editions.
  • Enterprise Edition: The Probe status icon has been updated in the UI and from this version, only the number of Probes that are down will be indicated.
  • OpManager: The minimum refresh Interval of the Real Time graphs have been changed from 1 second to 5 seconds to avoid discrepancy in the SNMP device.
  • OpManager: Previously, there were issues in saving the location values when zoom action was performed in the Maps widget. This has been fixed now.
  • OpManager: The map file can now be reconfigured using the new 'Edit Map Settings' option in the Google Maps page.
  • OpManager: In some cases, the OpManager upgrade failed due to an issue with discovery profile name duplication. This has been fixed now.
  • OpManager: Previously, there was an issue in initiating Interface Discovery in the MSP and RMM editions. This issue has been fixed now.
  • OpManager: Users who have enabled APM plugin in OpManager can create a custom report for application monitoring data by selecting the Applications module under Advanced report.
  • OpManager: The polling status of each monitor(s)/ interface(s) can now be viewed under the Monitors/ Interface tab in the device snapshot page.
  • OpManager: For agent-monitored devices, Introduced a new option to disable automatically updating the IP address when it has been changed in their environment.
  • OpManager: Previously, when agent-monitored servers with multiple IP addresses were discovered, there were issues while showing their primary IP address. This has been fixed now.
  • OpManager: While installing the agent in servers with multiple IP addresses, the servers were discovered as a new device even though it already exists in OpManager with the same host name but different IP address. This issue has been fixed now.
  • OpManager: Previously, when the agent was installed on Azure servers, its default DNS name 'reddog.microsoft.com' was shown for certain instances. This has been fixed now.
  • OpUtils: Previously, there was an issue with collecting ARP data from Huawei devices with CLI. This has now been fixed.
  • OpUtils: There was an XSS vulnerability issue in the Tree View under IP Address Manager and Switch Port Mapper. This issue has been fixed.
  • OpManager: Previously, there were issue while updating the multi-byte characters in the threshold message field under Availability monitor threshold page. This has been fixed now.
  • OpManager: Previously, there were issue while updating the multi-byte characters in the Availability Alarm Message field under Device Down Settings page. This has been fixed now.
  • OpManager: Previously, there were issue in adding a new Device Template with multi byte characters in its name field. This has now been fixed now.
  • OpManager: High Availability (HA) monitoring is now supported for Firewall, Wireless LAN Controller (WLC), Switch, Router, Server and Load balancer devices.
  • OpManager: Previously, users were unable to save the Business view (created before 12.5.652), if it contains business view shortcut with custom icon.
  • Firewall: Object overview with associated rules report support for all firewall devices.
  • Firewall: Rule Management, Compliance and Configuration backup support provided for FortiGate VDOM devices with API mode.
  • Firewall: Remote Access VPN type logs support for Juniper SRX firewall device.
  • Firewall: Option to change the IP address in SNMP settings.
  • Firewall: New Timestamp format support for Cisco ASA firewall.
  • Firewall: Unused rule data population issue for the Cisco firewalls while using the configuration file is fixed.
  • Firewall: For the FortiGate rule name value empty cases, rule id population changes to be done in the device rule parsing code. This issue is fixed.
  • Firewall: Cisco device rule parsing issue fixed.
  • Firewall: Sophos UTM device rule processing issue fixed.
  • Firewall: Palo Alto device rule failed due to special character availability in the Palo Alto device configuration file issue fixed.
  • Firewall: Check Point firewall cases, standard reports show undefined values in few cases. This issue is fixed.
  • Firewall: When any new API access code included for the Sophos UTM firewalls, facing the error in the primary API access code. This issue is fixed.
  • Firewall: FortiGate API access not working issue fixed.
  • Firewall: Email ID field having '&' symbol. Customer wants to create a custom report profile with notification for Email with '&' symbol. This issue is fixed.
  • Firewall: Sent byte, Received byte, Duration values are null in web filter logs for Sophos XG firewall device is handled.
  • Firewall: RAW search for denied logs showing no data for Cisco Meraki firewall. This issue is fixed.
  • Firewall: Logout event is not showing in Admin Reports and Audit Logs report for Sophos UTM firewalls. This issue is fixed.
  • Firewall: 'Active VPN users' report under 'Custom Reports' is not generated for MS SQL. This issue is fixed.
  • Firewall: Unable to create schedule for security audit report as device name contains more than 50 characters. This issue is fixed.
  • Firewall : Date and time is not correct under Duplicate Objects. This issue is fixed.
  • NetFlow: File integrity issue in the PGSQL folder in HighPerf(CStore) installation has been fixed.
  • NetFlow: An option has been provided to support all sFlow routers when negative traffic graph occurs due to mismatched interface indexes.
  • NetFlow: NetFlow Generator will henceforth not be supported in NetFlow Analyzer Free Add-on in OpManager Plus and OpManager Enterprise edition.
  • NetFlow: The issue in fetching SNMP values for new and unmanaged interfaces has been fixed.
  • NetFlow: The SNMP memory update issue that occurred when Write community was empty for SNMP v2 credentials has been fixed.
  • General: Previously, when a user profile was deleted, the dashboards created by the user and shared only to roles were also deleted. This has been fixed now.
  • General: Previously, multibyte characters were not supported in the description fields of dashboard and NOC view. This issue has been fixed now.
  • General: When failover was configured with a virtual IP address, the product startup failed due to corruption of 'itom_fos.conf' file. This issue has been fixed now.
  • General: When failover was configured with a virtual IP address, the File synchronization failed due to a missing 'replicateFiles.bat' file. This issue has been fixed now.
  • General: For builds 125430 and above, Under Audit -> General reports, only the latest row was available in the report for PostgreSQL database, when the time period chosen was more than 7 days. It has been handled now.
  • OpManager: Earlier, multibyte characters were not supported in the Syslog rule name. This issue has been fixed now.
  • OpManager MSP: Previously, Customer specific MSP dashboard widgets are not deleted automatically, when a customer is deleted. This issue has been fixed now.
  • OpManager MSP: Unmanaged probes triggered the Probe-down mail alerts. This issue has been fixed now.
  • OpManager MSP: Stack overflow error in the websocket client has been fixed now.
  • NCM: Earlier, there was an issue in importing conditional Advanced Script Configlets. This has been fixed now.
  • NCM: Earlier, there was an issue in notifying the change through syslog when mail notification too was configured. This has been fixed now.
  • NCM: Now, whenever scheduling fails without a device, an email is sent to the user and a notification is sent to all administrators.
  • NCM: Now, creation of a schedule is blocked when there are no devices available in the selected device group.
  • NCM: Earlier, there was an issue where role-based users' data were not generated in User Access Report. This issue is fixed now.
  • NCM: Earlier, there was a mismatch of terms which were used to represent the status of PCI review report in the GUI and exported format. This issue is fixed now.
  • NCM: Earlier, backup failure status was not displayed properly in Japanese language. This issue is fixed now.
  • NCM: Earlier, when the admin approves the upload request, requested user was displayed as approved user. This issue is fixed now.
  • NCM: Now, schedule time will also be displayed when an operator requests for Configlet Schedule approval.
  • NCM: Network Configuration Manager now supports ArubaOS CX, Ubiquiti Unifi, Ubiquiti Edge Switch models, and Ruckus Unleashed network models by default.
  • NCM: Network Configuration Manager now provides CLI support for Cisco APIC by default.
  • General: Alarms push notifications only for devices within a user's scope will appear on the product UI.
  • OpManager: Inappropriate Time window filter in the 'Device Downtime report' has been removed now.
  • OpManager: A new column 'Device Added Time' has been added to the Advanced Reports page.
  • OpManager: During Interface discovery, navigating back and forth from the Discovered Interfaces page would halt the discovery process. This issue has been fixed now.
  • OpManager: Previously, it wasn't possible to save the interface report generated from the Report builder, if the parent device of the selected interface belonged to 'Firewall' category. This issue has been fixed now.
  • OpManager: When navigating directly to the Business View page from the Inventory dropdown tab, the UI incorrectly showed an 'Add Device' button instead of the 'Add Business View' button. This has been fixed now.
  • OpManager: Japanese translation missed for few field labels in the link properties page in the Business view have been added now.
  • OpManager: Previously, the discovery profiles with the profile type "Single Device" (created before version 125174), were not displayed. This has been fixed now.
  • OpManager: Previously, on initiating interface discovery ( from the device snapshot page) for non-SNMP devices, the GUI showed no progress. Proper alert message will now be displayed instead.
  • OpManager: Discovery profiles created after updating an existing IPv6 range profile, couldn't be listed due to an internal issue. This has been fixed now.
  • OpManager: The 'Devices Availability Dashboard report' title in the scheduled PDF report had a minor typographical error which has been fixed now.
  • General: The unused older version of Apache's 'commons-text' jar has been removed.

Build No 126169 - December 30, 2022

  • OpManager: Previously, there was an XML External Entity (XXE) vulnerability in UCS module. It has been fixed now. (Reported by Cisco Talos- Marcin Noga. Refer: CVE-2022-43473)

Build No 126168 - November 15, 2022

  • OpManager: Previously, users were unable to save the Business view (created before 12.5.652) if it contains business view shortcut with custom icon.
  • OpManager: Previously, it was unable to save the Business View if it contains links with name exceeding 100 chars. This issue has been fixed now.
  • OpManager: Previously, there was an issue in initiating Interface Discovery in the MSP and RMM editions. This issue has been fixed now.

Build No 126167 - October 21, 2022

  • OpManager: The Inventory tab now features a new section for 'Applications', to list all the monitors from the Applications Manager plugin.
  • OpManager: APM plug-in's Dockers, Kubernetes and Openshift monitors can now be viewed as well as discovered from Virtualization -> Containers.
  • OpManager: A new widget type - Application Widgets has been added in the Add Widgets page for displaying Applications Manager Plugin data. The Application Widgets includes widgets like Applications Health & Availability, Application Monitors HeatMap, Application Monitors Summary, Application Monitor Groups Summary, Application Monitor Groups Tree view, Application Monitors Status.
  • OpManager: A new category of reports for Applications has been added under the Reports tab to list down all the reports from the Applications Manager plugin.
  • OpManager: Introduced APM plugin-related startup error messages in the UI and fixed the issues faced while loading the applications tab.
  • OpManager: Previously, when password was not given while user details were being updated from OpManager to APM, empty passwords were being updated. This has been fixed now.
  • OpManager: Previously, URLs were not deleted even when the devices associated to it, were removed from monitoring in bulk. This issue has been fixed now.
  • OpManager: Previously, when the URL snapshot page was accessed from the URL reports section, the resulting snapshot page was not displayed. This has been fixed now.
  • OpManager: The "Check Now" option for URLs in workflow was giving a blank response. This has been fixed.
  • OpManager: Previously, functional expressions were not being applied for SNMP Monitors using Float 32/64TC type OIDs. This has been fixed now.
  • OpManager: Previously, when a script template in MSSQL setup was deleted, users could not add another script template with the same name. This has been fixed now.
  • OpManager: Due to an exception thrown while executing script during the discovery process, HyperV host discovery failed in certain cases. This has been fixed now.
  • OpManager: When storage capacity of the cluster or serial number of the disk was not available in PrismAPI response, Nutanix discovery failed. This has been fixed now.
  • OpManager: Previously, vCenter's VMware map failed to load due to pattern mismatch error of an API parameter. This issue has been fixed now.
  • OpManager: For certain Xen VMs, incorrect guest OS was displayed. This issue has been fixed now.
  • OpManager: Previously, test credential for CLI protocol was not working for OpManager installed in linux environment. This has been fixed now.
  • OpManager : Previously, there was an issue with creating requests in OpManager - SDP On premise integration. This has been fixed for SDP build versions 14005 and above. Kindly refer compatibility document for more info.
  • OpManager: The PDF design has been updated for OpManager Reports.
  • OpManager: The default OpManager logo used within the product has been updated.
  • OpManager: In build versions from 126135, a white screen appeared instead of Choose the Criteria page while accessing the Notification Profile option from the device summary page under Inventory. This has been fixed now.
  • OpUtils: Previously, under IP Address Manager and Switch Port Mapper, there was an issue with adding non-English data to the Custom Columns in PostgreSQL. This issue has been fixed.
  • OpUtils: Previously, duplicate switch entries were made in OpUtils, when a switch was added with different DNS names from OpManager. This issue has been fixed.
  • OpUtils: Previously, audit entries were not made when switches were added from OpManager. This issue has now been fixed.
  • General: Previously, users were unable to load the Trap Forward tool page. This issue has been fixed.
  • OpUtils: Previously, users with custom roles could not access the probe servers list from OpManager Central's console. This issue has been fixed.
  • OpUtils: Previously, under OpUtils, in Scheduler, users were able to edit or delete default scanning tasks. This issue has now been fixed.
  • NetFlow: DPI functionality has been enabled for Operator and Custom users.
  • NetFlow: The option to Enable/Disable the DPI Module has been provided in the NetFlow Analyzer UI.

Build No 126166 - October 17, 2022

  • OpManager: Previously, SNMPv3 based device discovery would fail due to an issue in fetching Engine ID from the device. This has been fixed now.
  • OpManager: Unable to load Zoho Maps from 12.6.151 version due to an internal issue. This has been fixed now.
  • OpManager: From versions 12.5.645, in an alarm's snapshot page, log details of workflows not associated with that alarm were displayed. This has been fixed now and only workflows relevant to the selected alarm will be listed.
  • OpManager: Previously, sensitive user data was logged during Network discovery. This has been fixed now.

Build No 126165 - October 14, 2022

  • General: To enhance security, changes have been done in the InstallShield for Linux builds.

Build No 126164 - October 12, 2022

  • Enterprise Edition: The smart upgrade failed in Probes installed on X11-disabled Linux machines. This has been fixed now.
  • General: SDP MSP versions 13000 and above will now be compatible with only the latest versions of OpManager.
  • OpManager: Configuring Alarm Suppression in Quick Configuration Wizard failed for Business Views that had special characters in its name. This has been fixed now.

Build No 126163 - October 10, 2022

  • General : Previously, the Central secondary server details were not available in the new probe installation. This issue has been fixed now.
  • General : Previously, License file was not pushed to the secondary probe. This issue has now been fixed.

Build No 126162 - October 06, 2022

  • OpManager: The XSS vulnerability issues identified in the Business View page under Inventory, has been fixed now.
  • OpManager: Configurations and actions of the IP SLA monitor will now be audited.
  • NCM: Earlier, database tables were used to populate the hardware details of devices. Now, this dependency is removed and the hardware details are populated directly using the parser XML file.
  • Network Packet Sensor : SupportID: 4948580, 7217728 - IPv6 support has been provided for NetFlow Generator(NFG) & Deep Packet Inspection(DPI)
  • Network Packet Sensor : Template based flow generation(IPFIX) has been introduced in NetFlow Generator(NFG).

Build No 126155 - February 08, 2023

  • OpManager : Previously, when the URL debug was enabled, sensitive information of few APIs were being logged. This issue has been fixed now, to prevent sensitive data exposure.
  • OpManager : Previously, for URL monitors, there were stored XSS vulnerability issues, that lead to JS injection. This issue has been fixed now. (Reported by Ranjit Pahan. Refer: ZVE-2023-0284)

Build No 126154 - January 25, 2023

  • OpManager: Earlier, there was a XML External Entity (XXE) vulnerability which led to unauthenticated access of internal resources. This has been fixed now.(Reported by vuln discovery. Refer: CVE-2022-43473)
  • OpManager: Previously, the search icon was missing in the Layer2 Maps list view page under Maps tab. This issue has been fixed now.
  • OpManager: Previously, the groups were not sorted properly when 'Group by Groups' filter was chosen in the Tree view pane under the Inventory tab. This issue has been fixed now.
  • Enterprise Edition: Previously, in a few rare scenarios, the custom field values updated for devices or interfaces in a Probe were not pushed to the Central due to an internal issue. This issue has been fixed now.

Build No 126151 - September 30, 2022

  • General: The maximum number of characters for the 'Display login page message' field under the Rebranding option has been increased from 200 to 5000.
  • General: There was an issue in displaying characters of other languages (apart from English) in the SSH/Telnet Terminal page. This has now been fixed.
  • OpManager: Previously, there were issues while associating a business view with multi byte characters in its name, under user management and AD authentication. This has now been fixed.
  • OpManager: From version 125629, no data was displayed when a filter was applied to the All Events report. This issue has been fixed now.
  • OpManager: Users can now view monitoring data for Printer devices in Advanced reports.
  • OpManager: Schedule reports were not created when the selected Business View filter had 2 byte characters. This issue has been fixed.
  • OpManager: When a report generated using the Report Builder option is exported for a custom time period, the timeToDisplay parameter value pattern mismatch warning appeared. This issue has been fixed now.
  • OpManager: For some Linux environments when graphical reports were exported in PDF, the report appeared to be zoomed in. This can now be resolved by customizing resolution in OpManager.
  • OpManager: Previously, the Root Cause Analysis (RCA) page was not available in the Chinese and Japanese languages. Now it has been translated.
  • OpManager: Monitors under the Settings -> Monitoring -> performance monitor association page can now be associated to the probe from the central server.
  • OpManager: The performance monitor association page (under Settings -> Monitoring) is now revamped with a few additional options for better user experience.
  • OpManager: Performance monitors can now be dissociated from already associated devices.
  • OpManager: Already associated devices will now be listed on the right panel during Individual Performance Monitor association.
  • OpManager: For agent-monitored devices, fixed the device availability false alerts caused by agent communication failure due to unreliable network connection.
  • OpManager: For agent-monitored devices, encrypted the zip files used in data collection to enhance security.
  • OpManager: In Advanced Reports, monitor name was not displayed, when the name of a selected monitor had a forward slash (/). This issue has been fixed.
  • OpManager MSP: Introduced URL monitoring feature for MSPs to effectively monitor URLs from their client's environment.
  • OpManager MSP: There was an issue while updating existing user details from version 126132. It has been fixed now.
  • Enterprise Edition:  The Probe installation key that is provided in the Central server's Probe details page will be automatically regenerated every 15 minutes to enhance security.

Build No 126150 - September 28, 2022

  • Enterprise Edition: An email saying Probe-Central communication lost was incorrectly triggered from few Probes. This issue was identified in OpManager versions from 125645 and it has been fixed now

Build No 126149 - September 23, 2022

  • OpManager : 'APM Plugin Initial sync is in progress. Please try again after some time.' message was shown for some scenarios even though the application plugin was running. This issue has been fixed now.
  • OpManager : Under the device snapshot page, the Apps tab is now visible for OPM EE Central setup/installation, when APM plug-in is integrated with OpManager.
  • Opmanager : For APM plugin, introduced the following new subtabs along with their related menus under the Applications tab: Application/Web servers, Database servers, Website monitors. Users can now add the related monitor under the respective subtab menus.
  • OpManager : Previously, when the APM plugin's monitor group page was viewed from the Applications tab, the resulting page was displayed without the OpManager menu tab. This has been fixed now.
  • OpManager : Previously, incorrect Japanese UI messages were displayed when a service monitor was deleted. This has been fixed now.
  • OpManager : Fixed an issue where future eventlog polling would stop whenever there was a database issue during an ongoing poll.
  • OpManager : Previously, it was unable to update the Business Views created with background color prior to version 11600. This issue has been fixed now.
  • OpManager : Previously, if multiple users initiated interface discovery at the same time, the interfaces not matching the criteria provided by the user, were also discovered. This issue has been fixed now.
  • OpManager : Previously, there were issues with the data collection of IP SLA Path Hop using SNMPv3. This has been fixed now.
  • OpManager : Around 22 device templates and 62 SNMP monitors have been newly added for a wider support of device models during device discovery.
  • OpManager : Previously, there were issues in fetching the device list from Inventory, Network and Server tabs while using Group filter. This issue has been fixed now.
  • OpManager : Custom Fields association has now been restricted from Probe to avoid mismatch of Custom Fields between Central and Probe.

Build No 126148 - September 14, 2022

  • OpManager: An option to sync all Applications Manager alarms with OpManager has been introduced. This option would even sync alarms for devices that are not discovered in OpManager.
  • OpManager: A new section for application alarms has been added under the Alarms tab to list down all the alarms from the Applications Manager plugin.
  • OpManager: Previously, in Widgets that covered alarm data, any text involving special characters was shown as encoded values. This issue has been resolved.
  • NCM: Earlier, reports tab was not shown in OPM Probe when base build version is 125311 or below. This issue is fixed now.
  • NCM: Earlier, whenever a dynamic IPUpdate was initiated from OPM, IPAddress did not get updated in Config Management. This issue is fixed now.

Build No 126147 - September 08, 2022

  • General: PostgreSQL has been upgraded to version 10.21. The PostgreSQL vulnerability issues from 10.20 have been fixed now.
  • General: PostgreSQL JDBC Driver has been upgraded to version 42.4.0. The PostgreSQL JDBC Driver vulnerability issues from version 42.2.2 have been fixed now.
  • General: SAML Authentication can now be configured with email address NameId format to authenticate users based on the email address configured under the User Management page.
  • General: The unreliable data deserialization vulnerability in the XML-RPC jar files has been fixed by removing the concerned dependency.
  • NetFlow: An unwanted popup that was displayed with the Top N Problems widget has been removed.

Build No 126141 - December 28, 2022

  • General: Previously, JREMigration.bat/sh files were listed under File Integrity scanning when upgraded from version 12.6.005. This issue has now been fixed.
  • General : setEnv.bat failed File Integrity scanning after performing the DB Configuration using DBConfiguration.bat. This issue has now been fixed.
  • OpManager : Previously, there was an XML External Entity (XXE) vulnerability in UCS module. It has been fixed now. (Reported by Cisco Talos- Marcin Noga. Refer: CVE-2022-43473)

Build No 126139 - October 21, 2022

  • Enterprise Edition: An email saying Probe-Central communication lost was incorrectly triggered from few Probes. This issue was identified in OpManager versions from 12.5.645 and it has been fixed now.

Build No 126136 - September 02, 2022

  • Enterprise Edition: The default Database Maintenance limit of the Central server for maintaining Alarms has been increased from 10000 to 50000.
  • Enterprise Edition: There was an issue while displaying NetFlow Analyzer and Firewall Analyzer add-on widgets on the Central server's dashboard. This issue has been fixed now.
  • OpManager: When devices are discovered using IPs, the associated interfaces with respective IPs are also added. However, in a rare scenario, when a device IP does not have an interface, traps were not received. This issue has been fixed now.

Build No 126135 - August 31, 2022

  • OpManager: Previously, under Alarms, Root Cause Analysis, there was an issue with the UI layout of the Create RCA Profile page. This issue has been fixed.
  • OpManager: If no new Tampered/External files were detected during the File Integrity auto scanning, the previously raised File Integrity Alarms will be cleared.
  • OpManager: Queue implementation has been introduced for all outgoing requests to enhance performance of the Third Party Integrations.
  • OpManager: ServiceNow ticket fields loading performance has been tuned up.
  • OpManager Storage Monitoring: A new option has been introduced in the UI to manage or unmanage monitor instances for storage devices.
  • OpUtils: Previously, under Reports, users were unable to click and view the underlying data of the listed resources. This issue has been fixed.

Build No 126134 - August 24, 2022

  • General : Previously, there were issues while exporting data from Availability graphs, Google/Zoho maps, Device Templates and Dependency Tree (under Device Downtime scheduler) in the OpManager MSP and RMM editions. These issues have been fixed now.
  • OpManager : The Tree view under Inventory and Widget tabs, has now been optimized to list devices in segments of 1000 each, for improved usability.
  • OpManager : Previously, when associating a Device Template, the devices were not listed under "Associate to Devices" page in the Central Server. This issue has been fixed now.
  • OpManager : The APIs for "associateDeviceTemplate" and "getDeviceNotes" have been optimized for better performance.
  • OpManager : Meraki Switch and Meraki Security devices are now listed in the Switches and Firewalls category list view respectively, under Network tab.
  • OpManager : For improved security, access limitation has been introduced for all exposed/post APIs.
  • OpManager : Previously, users with business view scope were able to view unauthorized devices in the 'Infrastructure View' and 'Down devices' widget s in the Mobile App. This issue has been fixed now.
  • OpManager : Previously, users were unable to save the Business view if it contains business view shortcut with custom icon.
  • OpManager : The listAllAdvancedReports API that is used to fetch advanced report details such as the Name, Id and Description, has been updated as an external API.
  • OpManager : From now, a new external api getAdvancedReportData should be used to fetch monitoring data for advanced reports. The getReportsData is applicable only for default reports and is restricted to fetch data for advanced reports.

Build No 126132 - August 18, 2022

  • OpManager : Previously, there were issue in addition of IP SLA monitors with SNMP v1/v2 credentials. This has been fixed now.
  • OpManager : User roles for APM plugin can now be configured from the User management page under OpManager. Existing user roles that have not been synced, will be provided with the least privilege user roles.
  • OpManager : We are syncing APM supported applications list and the corresponding device details from OPM to APM plugin for applications auto discovery in APM plugin.
  • OpManager : In agent monitored devices, alerts were not raised for windows service monitors when all the monitored services were down. This has been fixed now.
  • OpManager : For agent-based Domain controllers, the FSMO role properties were not updated properly. This has been fixed now.
  • OpManager : A VMware query that was frequently used in scheduled rediscovery of vCenter/ ESX and few other operations, has now been optimized to reduce the CPU usage of OpManager installed server.
  • OpManager : During HyperV rediscovery, there was an issue in mapping the newly discovered virtual machine whose discovery failed during the previous discovery process, when auto VM discovery was disabled. This has been fixed now.
  • OpManager : There was an issue with virtual maps (HyperV, VMware, Nutanix) that had Japanese entity names. This has been fixed now.
  • OpManager : For VMware virtual machines having 'SUSE openSUSE' OS, the type will now be updated as 'Linux'.
  • OpManager : There was an issue in associating VMware partition monitor from VMwareVirtualMachine device template for virtual machines having the device type as 'Unknown'. This has been fixed now.
  • OpManager : For the restart service action enabled windows service monitors in agent-monitored devices, the services were restarting unnecessarily in some instances. This has been fixed now.
  • OpManager : In some cases, for MSSQL DB based OpManager, there were issues with data collection for files, folders and script monitors. This has been fixed now.
  • OpManager : Previously, there were issues while associating Windows 11 and Windows Server 2022 device templates with agent-based monitoring devices. This has been fixed now.
  • Enterprise Edition : In the failover model, there was data loss due to shared folder disconnection between a Probe and the Central. However, this issue has been fixed to prevent data loss.

Build No 126131 - August 10, 2022

  • General: Serial modem based SMS notification feature is no longer supported now.
  • General: The Admin and Request APIs used in the OpManager-ServiceDesk Plus MSP integration is now updated from v1 to v3.
  • OpManager: Introduced a new feature that allows users to sync Layer2 Maps to SDP Cloud CMDB while integrating OpManager with SDP Cloud.
  • OpManager: Fixed the scalability issues faced while syncing bulk CIs in the SDP cloud.
  • OpManager: The issue faced while syncing a new custom category field to SDP cloud is fixed now.

Build No 126130- August 04, 2022

  • OpManager: For agent-monitored devices, data was not being collected for file monitors, due to the failure in digital signature validation. This has been fixed now.

Build No 126122- September 26, 2022

  • OpManager: Previously, it was unable to update the Business Views created with background color prior to version 11600. This issue has been fixed now.
  • OpManager: Previously, users were unable to save the Business view if it contained business view shortcut with custom icon.
  • OpManager: Previously, users were facing an error when performing "Sync Device Template" action from the Device Templates page. This has been fixed now.
  • OpManager MSP: Previously, there was an issue in loading SDP MSP integration settings. This issue has been fixed
  • NetFlow: An unwanted popup that was displayed with the Top N Problems widget has been removed.
  • Enterprise Edition: There was an issue while displaying NetFlow Analyzer and Firewall Analyzer add-ons related widgets on the Central server's dashboard. This issue has been fixed now.
  • NCM: Earlier, whenever a dynamic IPUpdate was initiated from OpManager, IPAddress did not get updated in Config Management. This issue is fixed now.

Build No 126121- August 19, 2022

  • OpManager: Previously, there were issues in the addition of IP SLA monitors using SNMP v1/v2 credentials. This has been fixed now.

Build No 126120 - July 29, 2022

  • General: Earlier, there was a Remote Code Execution (RCE) vulnerability in IPv6 address management (CVE-2022-37024) and IPv4 address management (CVE-2022-38772) reported by an anonymous working with Trend Micro Zero Day Initiative. This has been fixed now.

Build No 126119 - July 29, 2022

  • General : To enhance security, we have introduced password protection for Backup Zip files.
  • General : Pass through authentication feature has been removed. Customers cannot use Pass through authentication for user authentication from now on.
  • General : Previously, users were not able to apply AMS license when failover was configured. This issue has been fixed now.
  • General : JsTree plugin has been upgraded to version 3.3.12.
  • General : Morris js library has been upgraded to version 0.5.1.
  • General : Raphael js library has been upgraded to version 2.3.0.
  • General : Select2 plugin has been upgraded to version 4.0.13.
  • General : Moment plugin has been upgraded to version 2.29.2.
  • General : Moment Timezone plugin has been upgraded to version 0.5.34.
  • General : Cropper js plugin has been upgraded to version 1.5.12.
  • General : Gridstack js library has been upgraded to version 5.0.0.
  • General : Underscore javascript library has been upgraded to version 1.13.2.
  • OpManager: While creating an advanced report, performance monitors data filtered for the last 1 hour was not shown. This issue has been fixed.
  • OpManager: When advanced reports are scheduled daily using the global schedule option, the reports were generated on alternate days instead of everyday. This issue has been fixed now.
  • OpManager: When reports are generated and exported using the report builder option, the X-axis values in the exported file were trimmed and did not appear as the actual report. This issue has been fixed now.
  • OpManager: Editing a scheduled report failed when a Group or Business view associated with that report was deleted. This is conveyed appropriately in the UI with an error message.
  • OpManager: In the Virtual Type field in advanced reports, when fields other than the default fields are present in the database, the report generated did not show complete data. This issue has been fixed.
  • OpManager: From now, LAN email id is supported for scheduling a report.
  • OpManager: The star icon for favorite reports did not appear for other languages except English. This issue has been fixed now.
  • OpManager: When a report generated using the Report Builder option is exported, the timeToDisplay parameter value pattern mismatch warning appeared. This issue has been fixed now.
  • OpManager: When Group Name filter was selected in advanced reports, It automatically changed to Device Name. This issue has been fixed now.
  • OpManager: While scheduling a report, if the Schedule type is changed to Publish URL, the URL variable was not automatically inserted into the message field. This issue has been fixed.

Build No 126118 - July 27, 2022

  • General: A vulnerability resulted in unauthenticated access of the user API key. This issue has been fixed now. (Reported by Anonymous working with Trend Micro Zero Day Initiative. Refer: CVE-2022-36923)

Build No 126117 - July 22, 2022

  • OpManager: Introduced support for configuring multiple linear threshold values for the same alert severity.
  • OpManager: Negative values were returned as SNMP OID response for Disk Utilization and Partition monitors with huge disk space (in the range of TBs). This issue has been fixed now.
  • OpManager: Hex Code was returned for OCTET STRING type OIDs while checking the custom monitors' response during their addition. This has been fixed now.
  • OpManager: There was a conflict in rendering the correct image when two realtime graphs were started simultaneously in image mode under two different tabs of the same browser. This has been fixed now.
  • OpManager: Realtime widgets were either frozen or shrunk in some cases when the dashboards or a particular widget was refreshed. This has been fixed now.
  • OpManager: The Internationalization inconsistencies in the eventlog monitor's name has been handled. From now on, the event log rules names will be shown based on the user selected language.
  • OpManager: APM page was inaccessible during AD user login for some users due to an encoding issue in the username. This has been fixed now.
  • OpManager: The graph in NOC View was plotted improperly in some cases if the data being plotted was huge in size. This has been fixed now.

Build No 126116 - July 18, 2022

  • OpManager: Previously, the group status was not updated properly due to an internal cache issue. A scheduler has been added to fix this anomaly once in every 12 hours.
  • General: OpManager now supports SHA-2 algorithm for SNMPv3 authentication to ensure more secure monitoring of your network devices. SNMPv3 Credentials can now be configured with SHA-256/SHA-512 algorithm in addition to the existing SHA and MD5.
  • General: SNMPv3 authentication using SHA-2 is now supported in add-on modules such as NCM, NFA, FWA, and OpUtils.
  • OpManager: Around 755 device templates and 145 SNMP monitors have been added for the proper classification of devices.
  • OpManager: During discovery, devices and interfaces were incorrectly added to the group created with 'Custom Field' criteria even when the condition failed. This issue has been fixed now.
  • OpManager: From this version, interfaces will not be moved to Idle Interface state. However, the existing idle interfaces will remain the same and can be managed.
  • OpManager: Issues with the 'sort' filter in Device Downtime report has been fixed now.
  • OpManager: Previously, interfaces were duplicated in trap discovery when multiple traps were received simultaneously. This issue has now been fixed.
  • OpManage Previously, Devices were not added properly in Google/Zoho Map during discovery and rediscovery for Mimomax devicetype. This issue has now been fixed.
  • OpManager: While discovering devices via Trap, the 'Discovered Time' value was not displayed under Inventory -> Devices. It was due to the occurrence of the same device as an external node (devices added from Add-on modules such as NCM, NFA, etc.) in OpManager. This issue has been fixed now.
  • OpManager: Google Map zip download URL has been changed from http to https.
  • OpManager: Previously, 'Configure Interface' option was unavailable on the snapshot pages of some networking devices. This has been fixed now.
  • OpManager: Previously, maximum and minimum values were not displayed properly on the Interface Realtime graphs. This issue has been fixed now.
  • OpManager: Previously, there were issues when redirecting to the device snapshot page from the 'Dependency Details' tree view in the Device Downtime Scheduler configuration page. This redirection link has been removed now.
  • OpManager: In the "Interfaces down in a device" widget, the icon for 'admin status' was incorrectly displayed as critical although the Interface Admin status was up. This issue has been fixed now.
  • OpManager: Previously, Network Discovery was stopped when the approve or ignore devices action was performed when the discovery is in progress. This issue has been fixed now.
  • OpManager: Previously, unwanted alerts were thrown in Central when in a Probe any Custom Monitor (WMI/SNMP) is deleted or if any Device Template is modified and associated to the Devices or deleted. This has been fixed now.
  • OpManager: Previously, the Device template added in Central wasn’t pushed to Probe due to an internal issue. This has been fixed now.
  • OpManager: Previously, a few SNMP monitors were not collecting data due to an incorrect OID expression. This issue has been fixed now.
  • OpManager: Previously, an incorrect alert was displayed in the Central due to an internal issue that appears when updating or deleting a Device template in Probe. This has been fixed now.
  • OpManager: During VMware discovery, the configured discovery rule engine was not executed. This issue has been fixed now.
  • OpManager: When printer devices were rediscovered using the schedule option, the IP address, DNS name and Display Name fields were duplicated due to an internal issue. This issue has been fixed now.
  • OpManager: During Interface discovery, a "General Failure" error was received when fetching 'ifSpeed' value (though SNMP response was proper in MIB browser). This has been fixed now.
  • OpManager: Previously, it wasn't possible to discover single device from Shallow Discovery due to a timeout issue. This issue has been fixed now.
  • OpManager: When a device configured with SNMP protocol for availability monitoring was deleted and added again, the default Availability monitoring protocol was set to SNMP instead of ICMP. This issue has been fixed now.
  • OpManager: In Layer 2 map, interfaces were found missing for devices that shared the same LLDP SysName and for devices that had a parent as well as child device associated with it.
  • OpManager: In the Watchguard Firewall device snapshot page, the 'Last Connected Time' under VPN Summary was incorrect. This has been fixed now.
  • OpManager: In build version 126115, certain issues were noticed while deleting a device. This issue has been fixed now.
  • OpManager: Previously, users were facing an error when performing "Sync Device Template" action from the Device Templates page. This has been fixed now.

Build No 126115 - July 13, 2022

  • General: Options to edit and delete alarm notes have been added in the product UI.
  • General: When an alarm raised with any severity level is cleared, it denotes the completion of an alarm cycle. Alarm notes added before an alarm cycle will not be shown in alarms list in the UI, only the notes added during the current alarm cycle will be shown.

Build No 126114 - July 11, 2022

  • General: Previously, a few files related to license module were listed in the file integrity scanning. This issue has been fixed now.
  • General: Users have the option to skip TFA now. Option to disable Two Factor Authentication is now available.
  • General: The maximum length for username in Mail Server Settings has been increased from 100 to 255 characters.
  • General: Previously, a top band message was shown when BCP and MSSQL minor versions mismatched. This issue has been fixed now.
  • General: AD users had issues while updating their contact details under User Management. This issue has been fixed now.
  • Enterprise Edition: Previously, the device association page froze while editing a notification profile with large number of devices added to it. This issue has been fixed now.
  • OpManager MSP: Previously, on configuring Radius authentication in MSP Central, the Radius authentication option present in the login page of MSP Probe was only shown after service restart. This issue has been fixed now.
  • NCM: Previously, on configuring Radius authentication in MSP Central, the Radius authentication option present in the login page of MSP Probe was only shown after service restart. This issue has been fixe
  • NCM: There were issues in starting a newly installed NCM Probe service, when Autologin is configured under AD authentication in NCM Central. This issue has been fixed now.

Build No 126113 - July 04, 2022

  • General : From now on for sensitive tasks in workflow, users have to enter an OTP that is generated to perform the following actions: Add Workflow, Edit Workflow, Copy Workflow and Import Workflow.
  • General : Script related critical operations such as add, update and import will now be carried out with OTP authentication when TFA is enabled.
  • OpManager : We are now supporting all the special characters in the category field while configuring the notification profile for ServiceNow.
  • OpManager : Previously, there were some issues while syncing the assets from OpManager to SDP OP. This has been fixed now.
  • OpManager : Previously, there were minor issues while configuring OpManager-ServiceNow integration. It has been fixed now.
  • OpManager : Availability graph for access points could not be loaded in Central due to an internal issue. This issue has been fixed.
  • OpManager : Introduced a new feature that allows users to sync Layer2 Maps to SDPOP CMDB while integrating OpManager with SDPOP. Enabling sync operation automatically builds CI relationship in CMBD. Hence users can now easily have a high level view of the network that further helps them with the impact analysis of the alerts raised.

Build No 126110 - January 25, 2023

  • OpManager : Previously, when the URL debug was enabled, sensitive information of few APIs were being logged. This issue has been fixed now, to prevent sensitive data exposure.
  • OpManager : Previously, for URL monitors, there were stored XSS vulnerability issues, that lead to JS injection. This issue has been fixed now. (Reported by Ranjit Pahan. Refer: ZVE-2023-0284)

Build No 126109 - January 06, 2023

  • OpManager : Previously, there was an XML External Entity (XXE) vulnerability in UCS module. It has been fixed now.(Reported by Cisco Talos-Marcin Nago. Refer: CVE-2022-43473)